(dump_file): Undo previous change about diagnosing unexpectely missing

[chaz/tar] / src / create.c

/* Create a tar archive.
   Copyright 1985, 92, 93, 94, 96, 97, 1999 Free Software Foundation, Inc.
   Written by John Gilmore, on 1985-08-25.

   This program is free software; you can redistribute it and/or modify it
   under the terms of the GNU General Public License as published by the
   Free Software Foundation; either version 2, or (at your option) any later
   version.

   This program is distributed in the hope that it will be useful, but
   WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General
   Public License for more details.

   You should have received a copy of the GNU General Public License along
   with this program; if not, write to the Free Software Foundation, Inc.,
   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */

#include "system.h"

#if !MSDOS
# include <pwd.h>
# include <grp.h>
#endif

#if HAVE_UTIME_H
# include <utime.h>
#else
struct utimbuf
  {
    long actime;
    long modtime;
  };
#endif

#include "common.h"

#ifndef MSDOS
extern dev_t ar_dev;
extern ino_t ar_ino;
#endif

extern struct name *gnu_list_name;

/* This module is the only one that cares about `struct link's.  */

struct link
  {
    struct link *next;
    dev_t dev;
    ino_t ino;
    char name[1];
  };

static struct link *linklist;   /* points to first link in list */
\f
/* The maximum uintmax_t value that can be represented with DIGITS digits,
   assuming that each digit is BITS_PER_DIGIT wide.  */
#define MAX_VAL_WITH_DIGITS(digits, bits_per_digit) \
   ((digits) * (bits_per_digit) < sizeof (uintmax_t) * CHAR_BIT \
    ? ((uintmax_t) 1 << ((digits) * (bits_per_digit))) - 1 \
    : (uintmax_t) -1)

/* Convert VALUE to an octal representation suitable for tar headers.
   Output to buffer WHERE with size SIZE.
   The result is undefined if SIZE is 0 or if VALUE is too large to fit.  */

static void
to_octal (uintmax_t value, char *where, size_t size)
{
  uintmax_t v = value;
  size_t i = size;

  do
    {
      where[--i] = '0' + (v & ((1 << LG_8) - 1));
      v >>= LG_8;
    }
  while (i);
}

/* Convert NEGATIVE VALUE to a base-256 representation suitable for
   tar headers.  NEGATIVE is 1 if VALUE was negative before being cast
   to uintmax_t, 0 otherwise.  Output to buffer WHERE with size SIZE.
   The result is undefined if SIZE is 0 or if VALUE is too large to
   fit.  */

static void
to_base256 (int negative, uintmax_t value, char *where, size_t size)
{
  uintmax_t v = value;
  uintmax_t propagated_sign_bits =
    ((uintmax_t) - negative << (CHAR_BIT * sizeof v - LG_256));
  size_t i = size;

  do
    {
      where[--i] = v & ((1 << LG_256) - 1);
      v = propagated_sign_bits | (v >> LG_256);
    }
  while (i);
}

/* Convert NEGATIVE VALUE (which was originally of size VALSIZE) to
   external form, using SUBSTITUTE (...) if VALUE won't fit.  Output
   to buffer WHERE with size SIZE.  NEGATIVE is 1 iff VALUE was
   negative before being cast to uintmax_t; its original bitpattern
   can be deduced from VALSIZE, its original size before casting.
   TYPE is the kind of value being output (useful for diagnostics).
   Prefer the POSIX format of SIZE - 1 octal digits (with leading zero
   digits), followed by '\0'.  If this won't work, and if GNU or
   OLDGNU format is allowed, use '\200' followed by base-256, or (if
   NEGATIVE is nonzero) '\377' followed by two's complement base-256.
   If neither format works, use SUBSTITUTE (...)  instead.  Pass to
   SUBSTITUTE the address of an 0-or-1 flag recording whether the
   substitute value is negative.  */

static void
to_chars (int negative, uintmax_t value, size_t valsize,
          uintmax_t (*substitute) PARAMS ((int *)),
          char *where, size_t size, const char *type)
{
  int base256_allowed = (archive_format == GNU_FORMAT
                         || archive_format == OLDGNU_FORMAT);

  /* Generate the POSIX octal representation if the number fits.  */
  if (! negative && value <= MAX_VAL_WITH_DIGITS (size - 1, LG_8))
    {
      where[size - 1] = '\0';
      to_octal (value, where, size - 1);
    }

  /* Otherwise, generate the base-256 representation if we are
     generating an old or new GNU format and if the number fits.  */
  else if (((negative ? -1 - value : value)
            <= MAX_VAL_WITH_DIGITS (size - 1, LG_256))
           && base256_allowed)
    {
      where[0] = negative ? -1 : 1 << (LG_256 - 1);
      to_base256 (negative, value, where + 1, size - 1);
    }

  /* Otherwise, if the number is negative, and if it would not cause
     ambiguity on this host by confusing positive with negative
     values, then generate the POSIX octal representation of the value
     modulo 2**(field bits).  The resulting tar file is
     machine-dependent, since it depends on the host word size.  Yuck!
     But this is the traditional behavior.  */
  else if (negative && valsize * CHAR_BIT <= (size - 1) * LG_8)
    {
      static int warned_once;
      if (! warned_once)
        {
          warned_once = 1;
          WARN ((0, 0, _("Generating negative octal headers")));
        }
      where[size - 1] = '\0';
      to_octal (value & MAX_VAL_WITH_DIGITS (valsize * CHAR_BIT, 1),
                where, size - 1);
    }

  /* Otherwise, output a substitute value if possible (with a
     warning), and an error message if not.  */
  else
    {
      uintmax_t maxval = (base256_allowed
                          ? MAX_VAL_WITH_DIGITS (size - 1, LG_256)
                          : MAX_VAL_WITH_DIGITS (size - 1, LG_8));
      char valbuf[UINTMAX_STRSIZE_BOUND + 1];
      char maxbuf[UINTMAX_STRSIZE_BOUND];
      char minbuf[UINTMAX_STRSIZE_BOUND + 1];
      char const *minval_string;
      char const *maxval_string = STRINGIFY_BIGINT (maxval, maxbuf);
      char const *value_string;

      if (base256_allowed)
        {
          uintmax_t m = maxval + 1 ? maxval + 1 : maxval / 2 + 1;
          char *p = STRINGIFY_BIGINT (m, minbuf + 1);
          *--p = '-';
          minval_string = p;
        }
      else
        minval_string = "0";

      if (negative)
        {
          char *p = STRINGIFY_BIGINT (- value, valbuf + 1);
          *--p = '-';
          value_string = p;
        }
      else
        value_string = STRINGIFY_BIGINT (value, valbuf);

      if (substitute)
        {
          int negsub;
          uintmax_t sub = substitute (&negsub) & maxval;
          uintmax_t s = (negsub &= archive_format == GNU_FORMAT) ? - sub : sub;
          char subbuf[UINTMAX_STRSIZE_BOUND + 1];
          char *sub_string = STRINGIFY_BIGINT (s, subbuf + 1);
          if (negsub)
            *--sub_string = '-';
          WARN ((0, 0, _("value %s out of %s range %s..%s; substituting %s"),
                 value_string, type, minval_string, maxval_string,
                 sub_string));
          to_chars (negsub, s, valsize, 0, where, size, type);
        }
      else
        ERROR ((0, 0, _("value %s out of %s range %s..%s"),
                value_string, type, minval_string, maxval_string));
    }
}

static uintmax_t
gid_substitute (int *negative)
{
  gid_t r;
#ifdef GID_NOBODY
  r = GID_NOBODY;
#else
  static gid_t gid_nobody;
  if (!gid_nobody && !gname_to_gid ("nobody", &gid_nobody))
    gid_nobody = -2;
  r = gid_nobody;
#endif
  *negative = r < 0;
  return r;
}

void
gid_to_chars (gid_t v, char *p, size_t s)
{
  to_chars (v < 0, (uintmax_t) v, sizeof v, gid_substitute, p, s, "gid_t");
}

void
major_to_chars (major_t v, char *p, size_t s)
{
  to_chars (v < 0, (uintmax_t) v, sizeof v, 0, p, s, "major_t");
}

void
minor_to_chars (minor_t v, char *p, size_t s)
{
  to_chars (v < 0, (uintmax_t) v, sizeof v, 0, p, s, "minor_t");
}

void
mode_to_chars (mode_t v, char *p, size_t s)
{
  /* In the common case where the internal and external mode bits are the same,
     and we are not using POSIX or GNU format,
     propagate all unknown bits to the external mode.
     This matches historical practice.
     Otherwise, just copy the bits we know about.  */
  int negative;
  uintmax_t u;
  if (S_ISUID == TSUID && S_ISGID == TSGID && S_ISVTX == TSVTX
      && S_IRUSR == TUREAD && S_IWUSR == TUWRITE && S_IXUSR == TUEXEC
      && S_IRGRP == TGREAD && S_IWGRP == TGWRITE && S_IXGRP == TGEXEC
      && S_IROTH == TOREAD && S_IWOTH == TOWRITE && S_IXOTH == TOEXEC
      && archive_format != POSIX_FORMAT
      && archive_format != GNU_FORMAT)
    {
      negative = v < 0;
      u = v;
    }
  else
    {
      negative = 0;
      u = ((v & S_ISUID ? TSUID : 0)
           | (v & S_ISGID ? TSGID : 0)
           | (v & S_ISVTX ? TSVTX : 0)
           | (v & S_IRUSR ? TUREAD : 0)
           | (v & S_IWUSR ? TUWRITE : 0)
           | (v & S_IXUSR ? TUEXEC : 0)
           | (v & S_IRGRP ? TGREAD : 0)
           | (v & S_IWGRP ? TGWRITE : 0)
           | (v & S_IXGRP ? TGEXEC : 0)
           | (v & S_IROTH ? TOREAD : 0)
           | (v & S_IWOTH ? TOWRITE : 0)
           | (v & S_IXOTH ? TOEXEC : 0));
    }
  to_chars (negative, u, sizeof v, 0, p, s, "mode_t");
}

void
off_to_chars (off_t v, char *p, size_t s)
{
  to_chars (v < 0, (uintmax_t) v, sizeof v, 0, p, s, "off_t");
}

void
size_to_chars (size_t v, char *p, size_t s)
{
  to_chars (0, (uintmax_t) v, sizeof v, 0, p, s, "size_t");
}

void
time_to_chars (time_t v, char *p, size_t s)
{
  to_chars (v < 0, (uintmax_t) v, sizeof v, 0, p, s, "time_t");
}

static uintmax_t
uid_substitute (int *negative)
{
  uid_t r;
#ifdef UID_NOBODY
  r = UID_NOBODY;
#else
  static uid_t uid_nobody;
  if (!uid_nobody && !uname_to_uid ("nobody", &uid_nobody))
    uid_nobody = -2;
  r = uid_nobody;
#endif
  *negative = r < 0;
  return r;
}

void
uid_to_chars (uid_t v, char *p, size_t s)
{
  to_chars (v < 0, (uintmax_t) v, sizeof v, uid_substitute, p, s, "uid_t");
}

void
uintmax_to_chars (uintmax_t v, char *p, size_t s)
{
  to_chars (0, v, sizeof v, 0, p, s, "uintmax_t");
}
\f
/* Writing routines.  */

/*-----------------------------------------------------------------------.
| Just zeroes out the buffer so we don't confuse ourselves with leftover |
| data.                                                                  |
`-----------------------------------------------------------------------*/

static void
clear_buffer (char *buffer)
{
  memset (buffer, 0, BLOCKSIZE);
}

/*-------------------------------------------------------------------------.
| Write the EOT block(s).  We zero at least two blocks, through            |
| the end of the record.  Old tar, as previous versions of GNU tar, writes |
| garbage after two zeroed blocks.                                         |
`-------------------------------------------------------------------------*/

void
write_eot (void)
{
  union block *pointer = find_next_block ();
  memset (pointer->buffer, 0, BLOCKSIZE);
  set_next_block_after (pointer);
  pointer = find_next_block ();
  memset (pointer->buffer, 0, available_space_after (pointer));
  set_next_block_after (pointer);
}

/*-----------------------------------------------------.
| Write a GNUTYPE_LONGLINK or GNUTYPE_LONGNAME block.  |
`-----------------------------------------------------*/

/* FIXME: Cross recursion between start_header and write_long!  */

static union block *start_header PARAMS ((const char *, struct stat *));

static void
write_long (const char *p, char type)
{
  size_t size = strlen (p) + 1;
  size_t bufsize;
  union block *header;
  struct stat foo;

  memset (&foo, 0, sizeof foo);
  foo.st_size = size;

  header = start_header ("././@LongLink", &foo);
  header->header.typeflag = type;
  finish_header (header);

  header = find_next_block ();

  bufsize = available_space_after (header);

  while (bufsize < size)
    {
      memcpy (header->buffer, p, bufsize);
      p += bufsize;
      size -= bufsize;
      set_next_block_after (header + (bufsize - 1) / BLOCKSIZE);
      header = find_next_block ();
      bufsize = available_space_after (header);
    }
  memcpy (header->buffer, p, size);
  memset (header->buffer + size, 0, bufsize - size);
  set_next_block_after (header + (size - 1) / BLOCKSIZE);
}
\f
/* Header handling.  */

/* Make a header block for the file whose stat info is st,
   and return its address.  */

static union block *
start_header (const char *name, struct stat *st)
{
  union block *header;

  if (!absolute_names_option)
    {
      size_t prefix_len = FILESYSTEM_PREFIX_LEN (name);

      if (prefix_len)
        {
          static int warned_once;
          if (!warned_once)
            {
              warned_once = 1;
              WARN ((0, 0, _("Removing `%.*s' prefix from archive names"),
                     (int) prefix_len, name));
            }
          name += prefix_len;
        }

      while (*name == '/')
        {
          static int warned_once;
          if (!warned_once)
            {
              warned_once = 1;
              WARN ((0, 0, _("Removing leading `/' from archive names")));
            }
          name++;
        }
    }

  if (sizeof header->header.name <= strlen (name))
    write_long (name, GNUTYPE_LONGNAME);
  header = find_next_block ();
  memset (header->buffer, 0, sizeof (union block));

  assign_string (&current_file_name, name);

  strncpy (header->header.name, name, NAME_FIELD_SIZE);
  header->header.name[NAME_FIELD_SIZE - 1] = '\0';

  /* Override some stat fields, if requested to do so.  */

  if (owner_option != (uid_t) -1)
    st->st_uid = owner_option;
  if (group_option != (gid_t) -1)
    st->st_gid = group_option;
  if (mode_option)
    st->st_mode = ((st->st_mode & ~MODE_ALL)
                   | mode_adjust (st->st_mode, mode_option));

  /* Paul Eggert tried the trivial test ($WRITER cf a b; $READER tvf a)
     for a few tars and came up with the following interoperability
     matrix:

              WRITER
        1 2 3 4 5 6 7 8 9   READER
        . . . . . . . . .   1 = SunOS 4.2 tar
        # . . # # . . # #   2 = NEC SVR4.0.2 tar
        . . . # # . . # .   3 = Solaris 2.1 tar
        . . . . . . . . .   4 = GNU tar 1.11.1
        . . . . . . . . .   5 = HP-UX 8.07 tar
        . . . . . . . . .   6 = Ultrix 4.1
        . . . . . . . . .   7 = AIX 3.2
        . . . . . . . . .   8 = Hitachi HI-UX 1.03
        . . . . . . . . .   9 = Omron UNIOS-B 4.3BSD 1.60Beta

             . = works
             # = ``impossible file type''

     The following mask for old archive removes the `#'s in column 4
     above, thus making GNU tar both a universal donor and a universal
     acceptor for Paul's test.  */

  if (archive_format == V7_FORMAT)
    MODE_TO_CHARS (st->st_mode & MODE_ALL, header->header.mode);
  else
    MODE_TO_CHARS (st->st_mode, header->header.mode);

  UID_TO_CHARS (st->st_uid, header->header.uid);
  GID_TO_CHARS (st->st_gid, header->header.gid);
  OFF_TO_CHARS (st->st_size, header->header.size);
  TIME_TO_CHARS (st->st_mtime, header->header.mtime);

  if (incremental_option)
    if (archive_format == OLDGNU_FORMAT)
      {
        TIME_TO_CHARS (st->st_atime, header->oldgnu_header.atime);
        TIME_TO_CHARS (st->st_ctime, header->oldgnu_header.ctime);
      }

  header->header.typeflag = archive_format == V7_FORMAT ? AREGTYPE : REGTYPE;

  switch (archive_format)
    {
    case V7_FORMAT:
      break;

    case OLDGNU_FORMAT:
      /* Overwrite header->header.magic and header.version in one blow.  */
      strcpy (header->header.magic, OLDGNU_MAGIC);
      break;

    case POSIX_FORMAT:
    case GNU_FORMAT:
      strncpy (header->header.magic, TMAGIC, TMAGLEN);
      strncpy (header->header.version, TVERSION, TVERSLEN);
      break;

    default:
      abort ();
    }

  if (archive_format == V7_FORMAT || numeric_owner_option)
    {
      /* header->header.[ug]name are left as the empty string.  */
    }
  else
    {
      uid_to_uname (st->st_uid, header->header.uname);
      gid_to_gname (st->st_gid, header->header.gname);
    }

  return header;
}

/*-------------------------------------------------------------------------.
| Finish off a filled-in header block and write it out.  We also print the |
| file name and/or full info if verbose is on.                             |
`-------------------------------------------------------------------------*/

void
finish_header (union block *header)
{
  size_t i;
  int sum;
  char *p;

  memcpy (header->header.chksum, CHKBLANKS, sizeof header->header.chksum);

  sum = 0;
  p = header->buffer;
  for (i = sizeof *header; i-- != 0; )
    /* We can't use unsigned char here because of old compilers, e.g. V7.  */
    sum += 0xFF & *p++;

  /* Fill in the checksum field.  It's formatted differently from the
     other fields: it has [6] digits, a null, then a space -- rather than
     digits, then a null.  We use to_chars.
     The final space is already there, from
     checksumming, and to_chars doesn't modify it.

     This is a fast way to do:

     sprintf(header->header.chksum, "%6o", sum);  */

  uintmax_to_chars ((uintmax_t) sum, header->header.chksum, 7);

  if (verbose_option
      && header->header.typeflag != GNUTYPE_LONGLINK
      && header->header.typeflag != GNUTYPE_LONGNAME)
    {
      /* These globals are parameters to print_header, sigh.  */

      current_header = header;
      /* current_stat is already set up.  */
      current_format = archive_format;
      print_header ();
    }

  set_next_block_after (header);
}
\f
/* Sparse file processing.  */

/*-------------------------------------------------------------------------.
| Takes a blockful of data and basically cruises through it to see if it's |
| made *entirely* of zeros, returning a 0 the instant it finds something   |
| that is a nonzero, i.e., useful data.                                    |
`-------------------------------------------------------------------------*/

static int
zero_block_p (char *buffer)
{
  int counter;

  for (counter = 0; counter < BLOCKSIZE; counter++)
    if (buffer[counter] != '\0')
      return 0;
  return 1;
}

/*---.
| ?  |
`---*/

static void
init_sparsearray (void)
{
  int counter;

  sp_array_size = 10;

  /* Make room for our scratch space -- initially is 10 elts long.  */

  sparsearray = xmalloc (sp_array_size * sizeof (struct sp_array));
  for (counter = 0; counter < sp_array_size; counter++)
    {
      sparsearray[counter].offset = 0;
      sparsearray[counter].numbytes = 0;
    }
}

/*---.
| ?  |
`---*/

static void
find_new_file_size (off_t *filesize, int highest_index)
{
  int counter;

  *filesize = 0;
  for (counter = 0;
       sparsearray[counter].numbytes && counter <= highest_index;
       counter++)
    *filesize += sparsearray[counter].numbytes;
}

/*-----------------------------------------------------------------------.
| Make one pass over the file NAME, studying where any non-zero data is, |
| that is, how far into the file each instance of data is, and how many  |
| bytes are there.  Save this information in the sparsearray, which will |
| later be translated into header information.                           |
`-----------------------------------------------------------------------*/

/* There is little point in trimming small amounts of null data at the head
   and tail of blocks, only avoid dumping full null blocks.  */

/* FIXME: this routine might accept bits of algorithmic cleanup, it is
   too kludgey for my taste...  */

static int
deal_with_sparse (char *name, union block *header)
{
  size_t numbytes = 0;
  off_t offset = 0;
  int file;
  int sparse_index = 0;
  ssize_t count;
  char buffer[BLOCKSIZE];

  if (archive_format == OLDGNU_FORMAT)
    header->oldgnu_header.isextended = 0;

  if (file = open (name, O_RDONLY), file < 0)
    /* This problem will be caught later on, so just return.  */
    return 0;

  init_sparsearray ();
  clear_buffer (buffer);

  while (count = safe_read (file, buffer, sizeof buffer), count != 0)
    {
      /* Realloc the scratch area as necessary.  FIXME: should reallocate
         only at beginning of a new instance of non-zero data.  */

      if (sparse_index > sp_array_size - 1)
        {
          sparsearray =
            xrealloc (sparsearray,
                      2 * sp_array_size * sizeof (struct sp_array));
          sp_array_size *= 2;
        }

      /* Process one block.  */

      if (count == sizeof buffer)

        if (zero_block_p (buffer))
          {
            if (numbytes)
              {
                sparsearray[sparse_index++].numbytes = numbytes;
                numbytes = 0;
              }
          }
        else
          {
            if (!numbytes)
              sparsearray[sparse_index].offset = offset;
            numbytes += count;
          }

      else

        /* Since count < sizeof buffer, we have the last bit of the file.  */

        if (!zero_block_p (buffer))
          {
            if (!numbytes)
              sparsearray[sparse_index].offset = offset;
            numbytes += count;
          }
        else
          /* The next two lines are suggested by Andreas Degert, who says
             they are required for trailing full blocks to be written to the
             archive, when all zeroed.  Yet, it seems to me that the case
             does not apply.  Further, at restore time, the file is not as
             sparse as it should.  So, some serious cleanup is *also* needed
             in this area.  Just one more... :-(.  FIXME.  */
          if (numbytes)
            numbytes += count;

      /* Prepare for next block.  */

      offset += count;
      /* FIXME: do not clear unless necessary.  */
      clear_buffer (buffer);
    }

  if (numbytes)
    sparsearray[sparse_index++].numbytes = numbytes;
  else
    {
      sparsearray[sparse_index].offset = offset - 1;
      sparsearray[sparse_index++].numbytes = 1;
    }

  close (file);
  return sparse_index - 1;
}

/*---.
| ?  |
`---*/

static int
finish_sparse_file (int file, off_t *sizeleft, off_t fullsize, char *name)
{
  union block *start;
  size_t bufsize;
  int sparse_index = 0;
  ssize_t count;

  while (*sizeleft > 0)
    {
      start = find_next_block ();
      memset (start->buffer, 0, BLOCKSIZE);
      bufsize = sparsearray[sparse_index].numbytes;
      if (!bufsize)
        {
          /* We blew it, maybe.  */
          char buf1[UINTMAX_STRSIZE_BOUND];
          char buf2[UINTMAX_STRSIZE_BOUND];

          ERROR ((0, 0, _("Wrote %s of %s bytes to file %s"),
                  STRINGIFY_BIGINT (fullsize - *sizeleft, buf1),
                  STRINGIFY_BIGINT (fullsize, buf2),
                  name));
          break;
        }

      if (lseek (file, sparsearray[sparse_index++].offset, SEEK_SET) < 0)
        {
          char buf[UINTMAX_STRSIZE_BOUND];
          ERROR ((0, errno, _("lseek error at byte %s in file %s"),
                  STRINGIFY_BIGINT (sparsearray[sparse_index - 1].offset, buf),
                  name));
          break;
        }

      /* If the number of bytes to be written here exceeds the size of
         the temporary buffer, do it in steps.  */

      while (bufsize > BLOCKSIZE)
        {
#if 0
          if (amount_read)
            {
              count = safe_read (file, start->buffer + amount_read,
                                 BLOCKSIZE - amount_read);
              bufsize -= BLOCKSIZE - amount_read;
              amount_read = 0;
              set_next_block_after (start);
              start = find_next_block ();
              memset (start->buffer, 0, BLOCKSIZE);
            }
#endif
          /* Store the data.  */

          count = safe_read (file, start->buffer, BLOCKSIZE);
          if (count < 0)
            {
              char buf[UINTMAX_STRSIZE_BOUND];
              ERROR ((0, errno,
                      _("Read error at byte %s, reading %lu bytes, in file %s"),
                      STRINGIFY_BIGINT (fullsize - *sizeleft, buf),
                      (unsigned long) bufsize, name));
              return 1;
            }
          bufsize -= count;
          *sizeleft -= count;
          set_next_block_after (start);
          start = find_next_block ();
          memset (start->buffer, 0, BLOCKSIZE);
        }

      {
        char buffer[BLOCKSIZE];

        clear_buffer (buffer);
        count = safe_read (file, buffer, bufsize);
        memcpy (start->buffer, buffer, BLOCKSIZE);
      }

      if (count < 0)
        {
          char buf[UINTMAX_STRSIZE_BOUND];
          
          ERROR ((0, errno,
                  _("Read error at byte %s, reading %lu bytes, in file %s"),
                  STRINGIFY_BIGINT (fullsize - *sizeleft, buf),
                  (unsigned long) bufsize, name));
          return 1;
        }
#if 0
      if (amount_read >= BLOCKSIZE)
        {
          amount_read = 0;
          set_next_block_after (start + (count - 1) / BLOCKSIZE);
          if (count != bufsize)
            {
              ERROR ((0, 0,
                      _("File %s shrunk, padding with zeros"),
                      name));
              return 1;
            }
          start = find_next_block ();
        }
      else
        amount_read += bufsize;
#endif
      *sizeleft -= count;
      set_next_block_after (start);

    }
  free (sparsearray);
#if 0
  set_next_block_after (start + (count - 1) / BLOCKSIZE);
#endif
  return 0;
}
\f
/* Main functions of this module.  */

/*---.
| ?  |
`---*/

void
create_archive (void)
{
  char *p;

  open_archive (ACCESS_WRITE);

  if (incremental_option)
    {
      char *buffer = xmalloc (PATH_MAX);
      const char *q;
      char *bufp;

      collect_and_sort_names ();

      while (p = name_from_list (), p)
        if (!excluded_name (p))
          dump_file (p, -1, (dev_t) 0);

      blank_name_list ();
      while (p = name_from_list (), p)
        if (!excluded_name (p))
          {
            strcpy (buffer, p);
            if (p[strlen (p) - 1] != '/')
              strcat (buffer, "/");
            bufp = buffer + strlen (buffer);
            q = gnu_list_name->dir_contents;
            if (q)
              for (; *q; q += strlen (q) + 1)
                if (*q == 'Y')
                  {
                    strcpy (bufp, q + 1);
                    dump_file (buffer, -1, (dev_t) 0);
                  }
          }
      free (buffer);
    }
  else
    {
      while (p = name_next (1), p)
        if (!excluded_name (p))
          dump_file (p, 1, (dev_t) 0);
    }

  write_eot ();
  close_archive ();

  if (listed_incremental_option)
    write_directory_file ();
}

/* Dump a single file, recursing on directories.  P is the file name
   to dump.  TOP_LEVEL tells whether this is a top-level call; zero
   means no, positive means yes, and negative means an incremental
   dump.  PARENT_DEVICE is the device of P's
   parent directory; it is examined only if TOP_LEVEL is zero.

   Set global CURRENT_STAT to stat output for this file.  */

/* FIXME: One should make sure that for *every* path leading to setting
   exit_status to failure, a clear diagnostic has been issued.  */

void
dump_file (char *p, int top_level, dev_t parent_device)
{
  union block *header;
  char type;
  union block *exhdr;
  char save_typeflag;
  time_t original_ctime;
  struct utimbuf restore_times;

  /* FIXME: `header' and `upperbound' might be used uninitialized in this
     function.  Reported by Bruno Haible.  */

  if (interactive_option && !confirm ("add", p))
    return;

  if (deref_stat (dereference_option, p, &current_stat) != 0)
    {
      WARN ((0, errno, _("Cannot add file %s"), p));
      if (!ignore_failed_read_option)
        exit_status = TAREXIT_FAILURE;
      return;
    }

  original_ctime = current_stat.st_ctime;
  restore_times.actime = current_stat.st_atime;
  restore_times.modtime = current_stat.st_mtime;

#ifdef S_ISHIDDEN
  if (S_ISHIDDEN (current_stat.st_mode))
    {
      char *new = (char *) alloca (strlen (p) + 2);
      if (new)
        {
          strcpy (new, p);
          strcat (new, "@");
          p = new;
        }
    }
#endif

  /* See if we want only new files, and check if this one is too old to
     put in the archive.  */

  if ((0 < top_level || !incremental_option)
      && !S_ISDIR (current_stat.st_mode)
      && current_stat.st_mtime < newer_mtime_option
      && (!after_date_option || current_stat.st_ctime < newer_ctime_option))
    {
      if (0 < top_level)
        WARN ((0, 0, _("%s: is unchanged; not dumped"), p));
      /* FIXME: recheck this return.  */
      return;
    }

#if !MSDOS
  /* See if we are trying to dump the archive.  */

  if (ar_dev && current_stat.st_dev == ar_dev && current_stat.st_ino == ar_ino)
    {
      WARN ((0, 0, _("%s is the archive; not dumped"), p));
      return;
    }
#endif

  if (S_ISDIR (current_stat.st_mode))
    {
      DIR *directory;
      struct dirent *entry;
      char *namebuf;
      size_t buflen;
      size_t len;
      dev_t our_device = current_stat.st_dev;

      /* If this tar program is installed suid root, like for Amanda, the
         access might look like denied, while it is not really.

         FIXME: I have the feeling this test is done too early.  Couldn't it
         just be bundled in later actions?  I guess that the proper support
         of --ignore-failed-read is the key of the current writing.  */

      if (access (p, R_OK) == -1 && geteuid () != 0)
        {
          WARN ((0, errno, _("Cannot add directory %s"), p));
          if (!ignore_failed_read_option)
            exit_status = TAREXIT_FAILURE;
          return;
        }

      /* Build new prototype name.  Ensure exactly one trailing slash.  */

      len = strlen (p);
      buflen = len + NAME_FIELD_SIZE;
      namebuf = xmalloc (buflen + 1);
      strncpy (namebuf, p, buflen);
      while (len >= 1 && namebuf[len - 1] == '/')
        len--;
      namebuf[len++] = '/';
      namebuf[len] = '\0';

      if (! is_avoided_name (namebuf))
        {
          /* The condition above used to be "archive_format != V7_FORMAT".
             GNU tar was not writing directory blocks at all.  Daniel Trinkle
             writes: ``All old versions of tar I have ever seen have
             correctly archived an empty directory.  The really old ones I
             checked included HP-UX 7 and Mt. Xinu More/BSD.  There may be
             some subtle reason for the exclusion that I don't know, but the
             current behavior is broken.''  I do not know those subtle
             reasons either, so until these are reported (anew?), just allow
             directory blocks to be written even with old archives.  */

          current_stat.st_size = 0;     /* force 0 size on dir */

          /* FIXME: If people could really read standard archives, this
             should be:

             header
               = start_header (standard_option ? p : namebuf, &current_stat);

             but since they'd interpret DIRTYPE blocks as regular
             files, we'd better put the / on the name.  */

          header = start_header (namebuf, &current_stat);

          if (incremental_option)
            header->header.typeflag = GNUTYPE_DUMPDIR;
          else /* if (standard_option) */
            header->header.typeflag = DIRTYPE;

          /* If we're gnudumping, we aren't done yet so don't close it.  */

          if (!incremental_option)
            finish_header (header);     /* done with directory header */
        }

      if (incremental_option && gnu_list_name->dir_contents)
        {
          off_t sizeleft;
          off_t totsize;
          size_t bufsize;
          union block *start;
          ssize_t count;
          const char *buffer, *p_buffer;

          buffer = gnu_list_name->dir_contents; /* FOO */
          totsize = 0;
          for (p_buffer = buffer; p_buffer && *p_buffer;)
            {
              size_t tmp;

              tmp = strlen (p_buffer) + 1;
              totsize += tmp;
              p_buffer += tmp;
            }
          totsize++;
          OFF_TO_CHARS (totsize, header->header.size);
          finish_header (header);
          p_buffer = buffer;
          sizeleft = totsize;
          while (sizeleft > 0)
            {
              if (multi_volume_option)
                {
                  assign_string (&save_name, p);
                  save_sizeleft = sizeleft;
                  save_totsize = totsize;
                }
              start = find_next_block ();
              bufsize = available_space_after (start);
              if (sizeleft < bufsize)
                {
                  bufsize = sizeleft;
                  count = bufsize % BLOCKSIZE;
                  if (count)
                    memset (start->buffer + sizeleft, 0, BLOCKSIZE - count);
                }
              memcpy (start->buffer, p_buffer, bufsize);
              sizeleft -= bufsize;
              p_buffer += bufsize;
              set_next_block_after (start + (bufsize - 1) / BLOCKSIZE);
            }
          if (multi_volume_option)
            assign_string (&save_name, 0);
          if (atime_preserve_option)
            utime (p, &restore_times);
          return;
        }

      /* See if we are about to recurse into a directory, and avoid doing
         so if the user wants that we do not descend into directories.  */

      if (no_recurse_option)
        return;

      /* See if we are crossing from one file system to another, and
         avoid doing so if the user only wants to dump one file system.  */

      if (one_file_system_option && !top_level
          && parent_device != current_stat.st_dev)
        {
          if (verbose_option)
            WARN ((0, 0, _("%s: On a different filesystem; not dumped"), p));
          return;
        }

      /* Now output all the files in the directory.  */

      errno = 0;

      directory = opendir (p);
      if (!directory)
        {
          ERROR ((0, errno, _("Cannot open directory %s"), p));
          return;
        }

      /* FIXME: Should speed this up by cd-ing into the dir.  */

      while (entry = readdir (directory), entry)
        {
          /* Skip `.', `..', and excluded file names.  */

          if (is_dot_or_dotdot (entry->d_name))
            continue;

          if ((int) NAMLEN (entry) + len >= buflen)
            {
              buflen = len + NAMLEN (entry);
              namebuf = xrealloc (namebuf, buflen + 1);
            }
          strcpy (namebuf + len, entry->d_name);
          if (!excluded_name (namebuf))
            dump_file (namebuf, 0, our_device);
        }

      closedir (directory);
      free (namebuf);
      if (atime_preserve_option)
        utime (p, &restore_times);
      return;
    }
  else if (is_avoided_name (p))
    return;
  else
    {
      /* Check for multiple links.

         We maintain a list of all such files that we've written so far.  Any
         time we see another, we check the list and avoid dumping the data
         again if we've done it once already.  */

      if (1 < current_stat.st_nlink)
        {
          struct link *lp;

          /* FIXME: First quick and dirty.  Hashing, etc later.  */

          for (lp = linklist; lp; lp = lp->next)
            if (lp->ino == current_stat.st_ino
                && lp->dev == current_stat.st_dev)
              {
                char *link_name = lp->name;

                /* We found a link.  */

                while (!absolute_names_option && *link_name == '/')
                  {
                    static int warned_once;
                    if (!warned_once)
                      {
                        warned_once = 1;
                        WARN ((0, 0,
                               _("Removing leading `/' from link names")));
                      }
                    link_name++;
                  }
                if (strlen (link_name) >= NAME_FIELD_SIZE)
                  write_long (link_name, GNUTYPE_LONGLINK);
                assign_string (&current_link_name, link_name);

                current_stat.st_size = 0;
                header = start_header (p, &current_stat);
                strncpy (header->header.linkname,
                         link_name, NAME_FIELD_SIZE);

                /* Force null truncated.  */

                header->header.linkname[NAME_FIELD_SIZE - 1] = 0;

                header->header.typeflag = LNKTYPE;
                finish_header (header);

                /* FIXME: Maybe remove from list after all links found?  */

                if (remove_files_option)
                  if (unlink (p) == -1)
                    ERROR ((0, errno, _("Cannot remove %s"), p));

                /* We dumped it.  */
                return;
              }

          /* Not found.  Add it to the list of possible links.  */

          lp = xmalloc (sizeof (struct link) + strlen (p));
          lp->ino = current_stat.st_ino;
          lp->dev = current_stat.st_dev;
          strcpy (lp->name, p);
          lp->next = linklist;
          linklist = lp;
        }

      /* This is not a link to a previously dumped file, so dump it.  */

      if (S_ISREG (current_stat.st_mode)
          || S_ISCTG (current_stat.st_mode))
        {
          int f;                        /* file descriptor */
          size_t bufsize;
          ssize_t count;
          off_t sizeleft;
          union block *start;
          int header_moved;
          char isextended = 0;
          int upperbound;

          header_moved = 0;

          if (sparse_option)
            {
              /* Check the size of the file against the number of blocks
                 allocated for it, counting both data and indirect blocks.
                 If there is a smaller number of blocks that would be
                 necessary to accommodate a file of this size, this is safe
                 to say that we have a sparse file: at least one of those
                 blocks in the file is just a useless hole.  For sparse
                 files not having more hole blocks than indirect blocks, the
                 sparseness will go undetected.  */

              /* Bruno Haible sent me these statistics for Linux.  It seems
                 that some filesystems count indirect blocks in st_blocks,
                 while others do not seem to:

                 minix-fs   tar: size=7205, st_blocks=18 and ST_NBLOCKS=18
                 extfs      tar: size=7205, st_blocks=18 and ST_NBLOCKS=18
                 ext2fs     tar: size=7205, st_blocks=16 and ST_NBLOCKS=16
                 msdos-fs   tar: size=7205, st_blocks=16 and ST_NBLOCKS=16

                 Dick Streefland reports the previous numbers as misleading,
                 because ext2fs use 12 direct blocks, while minix-fs uses only
                 6 direct blocks.  Dick gets:

                 ext2   size=20480      ls listed blocks=21
                 minix  size=20480      ls listed blocks=21
                 msdos  size=20480      ls listed blocks=20

                 It seems that indirect blocks *are* included in st_blocks.
                 The minix filesystem does not account for phantom blocks in
                 st_blocks, so `du' and `ls -s' give wrong results.  So, the
                 --sparse option would not work on a minix filesystem.  */

              if (ST_NBLOCKS (current_stat)
                  < (current_stat.st_size / ST_NBLOCKSIZE
                     + (current_stat.st_size % ST_NBLOCKSIZE != 0)))
                {
                  off_t filesize = current_stat.st_size;
                  int counter;

                  header = start_header (p, &current_stat);
                  header->header.typeflag = GNUTYPE_SPARSE;
                  header_moved = 1;

                  /* Call the routine that figures out the layout of the
                     sparse file in question.  UPPERBOUND is the index of the
                     last element of the "sparsearray," i.e., the number of
                     elements it needed to describe the file.  */

                  upperbound = deal_with_sparse (p, header);

                  /* See if we'll need an extended header later.  */

                  if (upperbound > SPARSES_IN_OLDGNU_HEADER - 1)
                    header->oldgnu_header.isextended = 1;

                  /* We store the "real" file size so we can show that in
                     case someone wants to list the archive, i.e., tar tvf
                     <file>.  It might be kind of disconcerting if the
                     shrunken file size was the one that showed up.  */

                  OFF_TO_CHARS (current_stat.st_size,
                                header->oldgnu_header.realsize);

                  /* This will be the new "size" of the file, i.e., the size
                     of the file minus the blocks of holes that we're
                     skipping over.  */

                  find_new_file_size (&filesize, upperbound);
                  current_stat.st_size = filesize;
                  OFF_TO_CHARS (filesize, header->header.size);

                  for (counter = 0; counter < SPARSES_IN_OLDGNU_HEADER; counter++)
                    {
                      if (!sparsearray[counter].numbytes)
                        break;

                      OFF_TO_CHARS (sparsearray[counter].offset,
                                    header->oldgnu_header.sp[counter].offset);
                      SIZE_TO_CHARS (sparsearray[counter].numbytes,
                                     header->oldgnu_header.sp[counter].numbytes);
                    }

                }
            }
          else
            upperbound = SPARSES_IN_OLDGNU_HEADER - 1;

          sizeleft = current_stat.st_size;

          /* Don't bother opening empty, world readable files.  Also do not open
             files when archive is meant for /dev/null.  */

          if (dev_null_output
              || (sizeleft == 0
                  && MODE_R == (MODE_R & current_stat.st_mode)))
            f = -1;
          else
            {
              f = open (p, O_RDONLY | O_BINARY);
              if (f < 0)
                {
                  if (! top_level && errno == ENOENT)
                    WARN ((0, 0, _("%s: file removed before we read it"), p));
                  else
                    WARN ((0, errno, _("Cannot add file %s"), p));
                  if (!ignore_failed_read_option)
                    exit_status = TAREXIT_FAILURE;
                  return;
                }
            }

          /* If the file is sparse, we've already taken care of this.  */

          if (!header_moved)
            header = start_header (p, &current_stat);

          /* Mark contiguous files, if we support them.  */

          if (archive_format != V7_FORMAT && S_ISCTG (current_stat.st_mode))
            header->header.typeflag = CONTTYPE;

          isextended = header->oldgnu_header.isextended;
          save_typeflag = header->header.typeflag;
          finish_header (header);
          if (isextended)
            {
              int counter;
              /* static */ int index_offset = SPARSES_IN_OLDGNU_HEADER;

            extend:
              exhdr = find_next_block ();
              memset (exhdr->buffer, 0, BLOCKSIZE);
              for (counter = 0; counter < SPARSES_IN_SPARSE_HEADER; counter++)
                {
                  if (counter + index_offset > upperbound)
                    break;

                  SIZE_TO_CHARS (sparsearray[counter + index_offset].numbytes,
                                 exhdr->sparse_header.sp[counter].numbytes);
                  OFF_TO_CHARS (sparsearray[counter + index_offset].offset,
                                exhdr->sparse_header.sp[counter].offset);
                }
              set_next_block_after (exhdr);
              if (index_offset + counter <= upperbound)
                {
                  index_offset += counter;
                  exhdr->sparse_header.isextended = 1;
                  goto extend;
                }

            }
          if (save_typeflag == GNUTYPE_SPARSE)
            {
              if (f < 0
                  || finish_sparse_file (f, &sizeleft, current_stat.st_size, p))
                goto padit;
            }
          else
            while (sizeleft > 0)
              {
                if (multi_volume_option)
                  {
                    assign_string (&save_name, p);
                    save_sizeleft = sizeleft;
                    save_totsize = current_stat.st_size;
                  }
                start = find_next_block ();

                bufsize = available_space_after (start);

                if (sizeleft < bufsize)
                  {
                    /* Last read -- zero out area beyond.  */

                    bufsize = sizeleft;
                    count = bufsize % BLOCKSIZE;
                    if (count)
                      memset (start->buffer + sizeleft, 0, BLOCKSIZE - count);
                  }
                if (f < 0)
                  count = bufsize;
                else
                  count = safe_read (f, start->buffer, bufsize);
                if (count < 0)
                  {
                    char buf[UINTMAX_STRSIZE_BOUND];
                    ERROR ((0, errno,
                            _("Read error at byte %s, reading %lu bytes, in file %s"),
                            STRINGIFY_BIGINT (current_stat.st_size - sizeleft,
                                              buf),
                            (unsigned long) bufsize, p));
                    goto padit;
                  }
                sizeleft -= count;

                /* This is nonportable (the type of set_next_block_after's arg).  */

                set_next_block_after (start + (count - 1) / BLOCKSIZE);

                if (count == bufsize)
                  continue;
                else
                  {
                    char buf[UINTMAX_STRSIZE_BOUND];
                    ERROR ((0, 0,
                            _("File %s shrunk by %s bytes, padding with zeros"),
                            p, STRINGIFY_BIGINT (sizeleft, buf)));
                    goto padit;         /* short read */
                  }
              }

          if (multi_volume_option)
            assign_string (&save_name, 0);

          if (f >= 0)
            {
              struct stat final_stat;
              if (fstat (f, &final_stat) != 0)
                ERROR ((0, errno, "%s: fstat", p));
              else if (final_stat.st_ctime != original_ctime)
                ERROR ((0, 0, _("%s: file changed as we read it"), p));
              if (close (f) != 0)
                ERROR ((0, errno, _("%s: close"), p));
              if (atime_preserve_option)
                utime (p, &restore_times);
            }
          if (remove_files_option)
            {
              if (unlink (p) == -1)
                ERROR ((0, errno, _("Cannot remove %s"), p));
            }
          return;

          /* File shrunk or gave error, pad out tape to match the size we
             specified in the header.  */

        padit:
          while (sizeleft > 0)
            {
              save_sizeleft = sizeleft;
              start = find_next_block ();
              memset (start->buffer, 0, BLOCKSIZE);
              set_next_block_after (start);
              sizeleft -= BLOCKSIZE;
            }
          if (multi_volume_option)
            assign_string (&save_name, 0);
          if (f >= 0)
            {
              close (f);
              if (atime_preserve_option)
                utime (p, &restore_times);
            }
          return;
        }
#ifdef HAVE_READLINK
      else if (S_ISLNK (current_stat.st_mode))
        {
          int size;
          char *buffer = (char *) alloca (PATH_MAX + 1);

          size = readlink (p, buffer, PATH_MAX + 1);
          if (size < 0)
            {
              WARN ((0, errno, _("Cannot add file %s"), p));
              if (!ignore_failed_read_option)
                exit_status = TAREXIT_FAILURE;
              return;
            }
          buffer[size] = '\0';
          if (size >= NAME_FIELD_SIZE)
            write_long (buffer, GNUTYPE_LONGLINK);
          assign_string (&current_link_name, buffer);

          current_stat.st_size = 0;     /* force 0 size on symlink */
          header = start_header (p, &current_stat);
          strncpy (header->header.linkname, buffer, NAME_FIELD_SIZE);
          header->header.linkname[NAME_FIELD_SIZE - 1] = '\0';
          header->header.typeflag = SYMTYPE;
          finish_header (header);       /* nothing more to do to it */
          if (remove_files_option)
            {
              if (unlink (p) == -1)
                ERROR ((0, errno, _("Cannot remove %s"), p));
            }
          return;
        }
#endif
      else if (S_ISCHR (current_stat.st_mode))
        type = CHRTYPE;
      else if (S_ISBLK (current_stat.st_mode))
        type = BLKTYPE;
      else if (S_ISFIFO (current_stat.st_mode)
               || S_ISSOCK (current_stat.st_mode))
        type = FIFOTYPE;
#ifdef S_ISDOOR
      else if (S_ISDOOR (current_stat.st_mode))
        {
          WARN ((0, 0, _("%s: door ignored"), p));
          return;
        }
#endif
      else
        goto unknown;
    }

  if (archive_format == V7_FORMAT)
    goto unknown;

  current_stat.st_size = 0;     /* force 0 size */
  header = start_header (p, &current_stat);
  header->header.typeflag = type;

  if (type != FIFOTYPE)
    {
      MAJOR_TO_CHARS (major (current_stat.st_rdev), header->header.devmajor);
      MINOR_TO_CHARS (minor (current_stat.st_rdev), header->header.devminor);
    }

  finish_header (header);
  if (remove_files_option)
    {
      if (unlink (p) == -1)
        ERROR ((0, errno, _("Cannot remove %s"), p));
    }
  return;

unknown:
  ERROR ((0, 0, _("%s: Unknown file type; file ignored"), p));
}