@c Maintenance notes:
@c 1. Pay attention to @FIXME{}s and @UNREVISED{}s
@c 2. Before creating final variant:
-@c 2.1. Run `make check-options' to make sure all options are properly
+@c 2.1. Run 'make check-options' to make sure all options are properly
@c documented;
-@c 2.2. Run `make master-menu' (see comment before the master menu).
+@c 2.2. Run 'make master-menu' (see comment before the master menu).
@include rendition.texi
@include value.texi
@value{VERSION}, @value{UPDATED}), which creates and extracts files
from archives.
-Copyright @copyright{} 1992, 1994, 1995, 1996, 1997, 1999, 2000, 2001,
-2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+Copyright @copyright{} 1992, 1994--1997, 1999--2001, 2003--2013 Free
+Software Foundation, Inc.
@quotation
Permission is granted to copy, distribute and/or modify this document
-under the terms of the GNU Free Documentation License, Version 1.1 or
-any later version published by the Free Software Foundation; with no
-Invariant Sections, with the Front-Cover Texts being ``A GNU Manual,''
-and with the Back-Cover Texts as in (a) below. A copy of the license
-is included in the section entitled "GNU Free Documentation License".
+under the terms of the GNU Free Documentation License, Version 1.3 or
+any later version published by the Free Software Foundation; with the
+Invariant Sections being ``GNU General Public License'', with the
+Front-Cover Texts being ``A GNU Manual'', and with the Back-Cover Texts
+as in (a) below. A copy of the license is included in the section
+entitled ``GNU Free Documentation License''.
(a) The FSF's Back-Cover Text is: ``You have the freedom to
-copy and modify this GNU manual. Buying copies from the FSF
-supports it in developing GNU and promoting software freedom.''
+copy and modify this GNU manual.''
@end quotation
@end copying
* Date input formats::
* Formats::
* Media::
+* Reliability and security::
Appendices
* Tar Internals::
* Genfile::
* Free Software Needs Free Documentation::
-* Copying This Manual::
+* GNU Free Documentation License::
* Index of Command Line Options::
* Index::
* Pure numbers in date strings:: 19931219, 1440.
* Seconds since the Epoch:: @@1078100502.
* Specifying time zone rules:: TZ="America/New_York", TZ="UTC0".
-* Authors of get_date:: Bellovin, Eggert, Salz, Berets, et al.
+* Authors of parse_datetime:: Bellovin, Eggert, Salz, Berets, et al.
Controlling the Archive Format
* gzip:: Creating and Reading Compressed Archives
* sparse:: Archiving Sparse Files
+Creating and Reading Compressed Archives
+
+* lbzip2:: Using lbzip2 with @GNUTAR{}.
+
Making @command{tar} Archives More Portable
* Portable Names:: Portable Names
two frequently used options (@samp{file} and @samp{verbose}). The other
chapters do not refer to the tutorial frequently; however, if a section
discusses something which is a complex variant of a basic concept, there
-may be a cross reference to that basic concept. (The entire book,
+may be a cross-reference to that basic concept. (The entire book,
including the tutorial, assumes that the reader understands some basic
concepts of using a Unix-type operating system; @pxref{Tutorial}.)
@smallexample
@group
-V--------- 0/0 1536 2006-06-09 13:07 MyVolume--Volume Header--
--rw-r--r-- gray/staff 456783 2006-06-09 12:06 aspic--Continued at
-byte 32456--
--rw-r--r-- gray/staff 62373 2006-06-09 12:06 apple
-lrwxrwxrwx gray/staff 0 2006-06-09 13:01 angst -> apple
--rw-r--r-- gray/staff 35793 2006-06-09 12:06 blues
-hrw-r--r-- gray/staff 0 2006-06-09 12:06 music link to blues
+V--------- 0/0 1536 2006-06-09 13:07 MyVolume--Volume Header--
+-rw-r--r-- gray/staff 456783 2006-06-09 12:06 aspic--Continued at byte 32456--
+-rw-r--r-- gray/staff 62373 2006-06-09 12:06 apple
+lrwxrwxrwx gray/staff 0 2006-06-09 13:01 angst -> apple
+-rw-r--r-- gray/staff 35793 2006-06-09 12:06 blues
+hrw-r--r-- gray/staff 0 2006-06-09 12:06 music link to blues
@end group
@end smallexample
@smallexample
$ @kbd{tar --list --verbose --file=collection.tar folk}
--rw-r--r-- myself user 62 1990-05-23 10:55 folk
+-rw-r--r-- myself/user 62 1990-05-23 10:55 folk
@end smallexample
@cindex listing member and file names
@smallexample
@group
$ @kbd{tar --create --verbose --file archive /etc/mail}
-tar: Removing leading `/' from member names
+tar: Removing leading '/' from member names
/etc/mail/
/etc/mail/sendmail.cf
/etc/mail/aliases
@command{tar} responds:
@smallexample
-drwxrwxrwx myself user 0 1990-05-31 21:49 practice/
--rw-r--r-- myself user 42 1990-05-21 13:29 practice/blues
--rw-r--r-- myself user 62 1990-05-23 10:55 practice/folk
--rw-r--r-- myself user 40 1990-05-21 13:30 practice/jazz
--rw-r--r-- myself user 10240 1990-05-31 21:49 practice/collection.tar
+drwxrwxrwx myself/user 0 1990-05-31 21:49 practice/
+-rw-r--r-- myself/user 42 1990-05-21 13:29 practice/blues
+-rw-r--r-- myself/user 62 1990-05-23 10:55 practice/folk
+-rw-r--r-- myself/user 40 1990-05-21 13:30 practice/jazz
+-rw-r--r-- myself/user 10240 1990-05-31 21:49 practice/collection.tar
@end smallexample
When you use a directory name as a file name argument, @command{tar} acts on
produces this:
@smallexample
--rw-r--r-- me user 28 1996-10-18 16:31 jazz
--rw-r--r-- me user 21 1996-09-23 16:44 blues
--rw-r--r-- me user 20 1996-09-23 16:44 folk
+-rw-r--r-- me/user 28 1996-10-18 16:31 jazz
+-rw-r--r-- me/user 21 1996-09-23 16:44 blues
+-rw-r--r-- me/user 20 1996-09-23 16:44 folk
@end smallexample
@node extracting files
@smallexample
$ @kbd{tar -xvvf music.tar practice/folk practice/jazz}
--rw-r--r-- me user 28 1996-10-18 16:31 practice/jazz
--rw-r--r-- me user 20 1996-09-23 16:44 practice/folk
+-rw-r--r-- me/user 28 1996-10-18 16:31 practice/jazz
+-rw-r--r-- me/user 20 1996-09-23 16:44 practice/folk
@end smallexample
@noindent
@option{--extract}, @option{--compare}, and @option{--update})
will act on the entire contents of the archive.
+@anchor{exit status}
@cindex exit status
@cindex return status
Besides successful exits, @GNUTAR{} may fail for
@subsection Old Option Style
@cindex options, old style
@cindex old option style
+@cindex option syntax, traditional
-Like short options, @dfn{old options} are single letters. However, old options
+As far as we know, all @command{tar} programs, @acronym{GNU} and
+non-@acronym{GNU}, support @dfn{old options}: that is, if the first
+argument does not start with @samp{-}, it is assumed to specify option
+letters. @GNUTAR{} supports old options not only for historical
+reasons, but also because many people are used to them. If the first
+argument does not start with a dash, you are announcing the old option
+style instead of the short option style; old options are decoded
+differently.
+
+Like short options, old options are single letters. However, old options
must be written together as a single clumped set, without spaces separating
-them or dashes preceding them@footnote{Beware that if you precede options
-with a dash, you are announcing the short option style instead of the
-old option style; short options are decoded differently.}. This set
+them or dashes preceding them. This set
of letters must be the first to appear on the command line, after the
@command{tar} program name and some white space; old options cannot appear
anywhere else. The letter of an old option is exactly the same letter as
Here, @samp{20} is the argument of @option{-b} and @samp{/dev/rmt0} is
the argument of @option{-f}.
-On the other hand, this old style syntax makes it difficult to match
+The old style syntax can make it difficult to match
option letters with their corresponding arguments, and is often
confusing. In the command @w{@samp{tar cvbf 20 /dev/rmt0}}, for example,
@samp{20} is the argument for @option{-b}, @samp{/dev/rmt0} is the
second example, however, uses @file{z} as the value for option
@samp{f} --- probably not what was intended.
-Old options are kept for compatibility with old versions of @command{tar}.
-
This second example could be corrected in many ways, among which the
following are equivalent:
@kbd{tar cf archive.tar.gz -z file}
@end smallexample
-@cindex option syntax, traditional
-As far as we know, all @command{tar} programs, @acronym{GNU} and
-non-@acronym{GNU}, support old options. @GNUTAR{}
-supports them not only for historical reasons, but also because many
-people are used to them. For compatibility with Unix @command{tar},
-the first argument is always treated as containing command and option
-letters even if it doesn't start with @samp{-}. Thus, @samp{tar c} is
-equivalent to @w{@samp{tar -c}:} both of them specify the
-@option{--create} (@option{-c}) command to create an archive.
-
@node Mixing
@subsection Mixing Option Styles
@itemx -P
Normally when creating an archive, @command{tar} strips an initial
-@samp{/} from member names. This option disables that behavior.
-@xref{absolute}.
+@samp{/} from member names, and when extracting from an archive @command{tar}
+treats names specially if they have initial @samp{/} or internal
+@samp{..}. This option disables that behavior. @xref{absolute}.
@opsummary{after-date}
@item --after-date
@item --check-device
Check device numbers when creating a list of modified files for
incremental archiving. This is the default. @xref{device numbers},
-for a detailed description.
+for a detailed description.
@opsummary{checkpoint}
@item --checkpoint[=@var{number}]
@item --dereference
@itemx -h
-When creating a @command{tar} archive, @command{tar} will archive the
-file that a symbolic link points to, rather than archiving the
-symlink. @xref{dereference}.
+When reading or writing a file to be archived, @command{tar} accesses
+the file that a symbolic link points to, rather than the symlink
+itself. @xref{dereference}.
@opsummary{directory}
@item --directory=@var{dir}
@xref{Formats}, for a detailed discussion of these formats.
+@opsummary{full-time}
+@item --full-time
+This option instructs @command{tar} to print file times to their full
+resolution. Usually this means 1-second resolution, but that depends
+on the underlying file system. The @option{--full-time} option takes
+effect only when detailed output (verbosity level 2 or higher) has
+been requested using the @option{--verbose} option, e.g., when listing
+or extracting archives:
+
+@smallexample
+$ @kbd{tar -t -v --full-time -f archive.tar}
+@end smallexample
+
+@noindent
+or, when creating an archive:
+
+@smallexample
+$ @kbd{tar -c -vv --full-time -f archive.tar .}
+@end smallexample
+
+Notice, thar when creating the archive you need to specify
+@option{--verbose} twice to get a detailed output (@pxref{verbose
+tutorial}).
+
@opsummary{group}
@item --group=@var{group}
Files added to the @command{tar} archive will have a group @acronym{ID} of @var{group},
-rather than the group from the source file. @var{group} is first decoded
-as a group symbolic name, but if this interpretation fails, it has to be
-a decimal numeric group @acronym{ID}. @xref{override}.
+rather than the group from the source file. @var{group} can specify a
+symbolic name, or a numeric @acronym{ID}, or both as
+@var{name}:@var{id}. @xref{override}.
Also see the comments for the @option{--owner=@var{user}} option.
@item --ignore-failed-read
Do not exit unsuccessfully merely because an unreadable file was encountered.
-@xref{Reading}.
+@xref{Ignore Failed Read}.
@opsummary{ignore-zeros}
@item --ignore-zeros
@item --keep-old-files
@itemx -k
-Do not overwrite existing files when extracting files from an archive.
+Do not overwrite existing files when extracting files from an
+archive. Return error if such files exist. See also
+@ref{--skip-old-files}.
+
@xref{Keep Old Files}.
@opsummary{label}
@item --no-check-device
Do not check device numbers when creating a list of modified files
for incremental archiving. @xref{device numbers}, for
-a detailed description.
+a detailed description.
@opsummary{no-delay-directory-restore}
@item --no-delay-directory-restore
Specifies that @command{tar} should use @var{user} as the owner of members
when creating archives, instead of the user associated with the source
-file. @var{user} is first decoded as a user symbolic name, but if
-this interpretation fails, it has to be a decimal numeric user @acronym{ID}.
+file. @var{user} can specify a symbolic name, or a numeric
+@acronym{ID}, or both as @var{name}:@var{id}.
@xref{override}.
This option does not affect extraction from archives.
from pipes on systems with buggy implementations. @xref{Reading}.
@opsummary{record-size}
-@item --record-size=@var{size}
+@item --record-size=@var{size}[@var{suf}]
Instructs @command{tar} to use @var{size} bytes per record when accessing the
-archive. @xref{Blocking Factor}.
+archive. The argument can be suffixed with a @dfn{size suffix}, e.g.
+@option{--record-size=10K} for 10 Kilobytes. @xref{size-suffixes},
+for a list of valid suffixes. @xref{Blocking Factor}, for a detailed
+description of this option.
@opsummary{recursion}
@item --recursion
Here is an example of what you can see using this option:
@smallexample
-$ tar --show-defaults
+$ @kbd{tar --show-defaults}
--format=gnu -f- -b20 --quoting-style=escape
--rmt-command=/usr/libexec/rmt --rsh-command=/usr/bin/rsh
@end smallexample
member names stored in the archive, as opposed to the actual file
names. @xref{listing member and file names}.
+@opsummary{skip-old-files}
+@item --skip-old-files
+
+Do not overwrite existing files when extracting files from an
+archive. @xref{Keep Old Files}.
+
+This option differs from @option{--keep-old-files} in that it does not
+treat such files as an error, instead it just silently avoids
+overwriting them.
+
+The @option{--warning=existing-file} option can be used together with
+this option to produce warning messages about existing old files
+(@pxref{warnings}).
+
@opsummary{sparse}
@item --sparse
@itemx -S
@samp{~}. @xref{backup}.
@opsummary{tape-length}
-@item --tape-length=@var{num}
-@itemx -L @var{num}
+@item --tape-length=@var{num}[@var{suf}]
+@itemx -L @var{num}[@var{suf}]
Specifies the length of tapes that @command{tar} is writing as being
-@w{@var{num} x 1024} bytes long. @xref{Using Multiple Tapes}.
+@w{@var{num} x 1024} bytes long. If optional @var{suf} is given, it
+specifies a multiplicative factor to be used instead of 1024. For
+example, @samp{-L2M} means 2 megabytes. @xref{size-suffixes}, for a
+list of allowed suffixes. @xref{Using Multiple Tapes}, for a detailed
+discussion of this option.
@opsummary{test-label}
@item --test-label
@opsummary{uncompress}
@item --uncompress
-(See @option{--compress}. @pxref{gzip})
+(See @option{--compress}, @pxref{gzip})
@opsummary{ungzip}
@item --ungzip
-(See @option{--gzip}. @pxref{gzip})
+(See @option{--gzip}, @pxref{gzip})
@opsummary{unlink-first}
@item --unlink-first
@smallexample
tar (GNU tar) @value{VERSION}
-Copyright (C) 2010 Free Software Foundation, Inc.
-Copyright (C) 2010 Free Software Foundation, Inc.
+Copyright (C) 2013 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Verbose output appears on the standard output except when an archive is
being written to the standard output, as with @samp{tar --create
---file=- --verbose} (@samp{tar cfv -}, or even @samp{tar cv}---if the
+--file=- --verbose} (@samp{tar cvf -}, or even @samp{tar cv}---if the
installer let standard output be the default archive). In that case
@command{tar} writes verbose output to the standard error stream.
@item symlink-cast
@samp{Attempting extraction of symbolic links as hard links}
@kwindex unknown-cast
-@cindex @samp{Unknown file type `%c', extracted as normal file}, warning message
+@cindex @samp{Unknown file type '%c', extracted as normal file}, warning message
@item unknown-cast
-@samp{%s: Unknown file type `%c', extracted as normal file}
+@samp{%s: Unknown file type '%c', extracted as normal file}
@kwindex ignore-newer
@cindex @samp{Current %s is newer or same age}, warning message
@item ignore-newer
@samp{Current %s is newer or same age}
@kwindex unknown-keyword
-@cindex @samp{Ignoring unknown extended header keyword `%s'}, warning message
-@item unknown-keyword
-@samp{Ignoring unknown extended header keyword `%s'}
+@cindex @samp{Ignoring unknown extended header keyword '%s'}, warning message
+@item unknown-keyword
+@samp{Ignoring unknown extended header keyword '%s'}
+@kwindex decompress-program
+@item decompress-program
+Controls verbose description of failures occurring when trying to run
+alternative decompressor programs (@pxref{alternative decompression
+programs}). This warning is disabled by default (unless
+@option{--verbose} is used). A common example of what you can get
+when using this warning is:
+
+@smallexample
+$ @kbd{tar --warning=decompress-program -x -f archive.Z}
+tar (child): cannot run compress: No such file or directory
+tar (child): trying gzip
+@end smallexample
+
+This means that @command{tar} first tried to decompress
+@file{archive.Z} using @command{compress}, and, when that
+failed, switched to @command{gzip}.
@end table
@subheading Keywords controlling incremental extraction:
@smallexample
@kbd{tar --create --file=empty-archive.tar --files-from=/dev/null}
-@kbd{tar cfT empty-archive.tar /dev/null}
+@kbd{tar -cf empty-archive.tar -T /dev/null}
@end smallexample
@xopindex{extract, complementary notes}
Other operations don't deal with these members as perfectly as you might
prefer; if you were to use @option{--extract} to extract the archive,
-only the most recently added copy of a member with the same name as
+only the most recently added copy of a member with the same name as
other members would end up in the working directory. This is because
@option{--extract} extracts an archive in the order the members appeared
in the archive; the most recently archived members will be extracted
last. Additionally, an extracted member will @emph{replace} a file of
the same name which existed in the directory already, and @command{tar}
will not prompt you about this@footnote{Unless you give it
-@option{--keep-old-files} option, or the disk copy is newer than
-the one in the archive and you invoke @command{tar} with
-@option{--keep-newer-files} option.}. Thus, only the most recently archived
-member will end up being extracted, as it will replace the one
-extracted before it, and so on.
+@option{--keep-old-files} (or @option{--skip-old-files}) option, or
+the disk copy is newer than the one in the archive and you invoke
+@command{tar} with @option{--keep-newer-files} option.}. Thus, only
+the most recently archived member will end up being extracted, as it
+will replace the one extracted before it, and so on.
@cindex extracting @var{n}th copy of the file
@xopindex{occurrence, described}
@smallexample
$ @kbd{tar --list --file=collection.tar}
--rw-r--r-- me user 28 1996-10-18 16:31 jazz
--rw-r--r-- me user 21 1996-09-23 16:44 blues
--rw-r--r-- me user 20 1996-09-23 16:44 folk
--rw-r--r-- me user 20 1996-09-23 16:44 rock
+-rw-r--r-- me/user 28 1996-10-18 16:31 jazz
+-rw-r--r-- me/user 21 1996-09-23 16:44 blues
+-rw-r--r-- me/user 20 1996-09-23 16:44 folk
+-rw-r--r-- me/user 20 1996-09-23 16:44 rock
@end smallexample
@node multiple
@smallexample
$ @kbd{tar --list --verbose --file=collection.tar}
--rw-r--r-- me user 28 1996-10-18 16:31 jazz
--rw-r--r-- me user 21 1996-09-23 16:44 blues
--rw-r--r-- me user 20 1996-09-23 16:44 folk
--rw-r--r-- me user 20 1996-09-23 16:44 rock
--rw-r--r-- me user 58 1996-10-24 18:30 blues
+-rw-r--r-- me/user 28 1996-10-18 16:31 jazz
+-rw-r--r-- me/user 21 1996-09-23 16:44 blues
+-rw-r--r-- me/user 20 1996-09-23 16:44 folk
+-rw-r--r-- me/user 20 1996-09-23 16:44 rock
+-rw-r--r-- me/user 58 1996-10-24 18:30 blues
@end smallexample
@noindent
@smallexample
$ @kbd{tar --extract -vv --occurrence --file=collection.tar blues}
--rw-r--r-- me user 21 1996-09-23 16:44 blues
+-rw-r--r-- me/user 21 1996-09-23 16:44 blues
@end smallexample
@xref{Writing}, for more information on @option{--extract} and
-@xref{Option Summary, --occurrence}, for the description of
+see @ref{Option Summary, --occurrence}, for a description of
@option{--occurrence} option.
@node update
@file{classical}, in your practice directory, and some extra text to the
file @file{blues}, using any text editor. Then invoke @command{tar} with
the @samp{update} operation and the @option{--verbose} (@option{-v})
-option specified, using the names of all the files in the practice
+option specified, using the names of all the files in the @file{practice}
directory as file name arguments:
@smallexample
@option{--file} option and name the rest of archives to be
concatenated on the command line. The members, and their member
names, will be copied verbatim from those archives to the first
-one@footnote{This can cause multiple members to have the same name, for
-information on how this affects reading the archive, @ref{multiple}.}.
+one@footnote{This can cause multiple members to have the same name. For
+information on how this affects reading the archive, see @ref{multiple}.}.
The new, concatenated archive will be called by the same name as the
one given with the @option{--file} option. As usual, if you omit
@option{--file}, @command{tar} will use the value of the environment
@smallexample
$ @kbd{tar -tvf bluesrock.tar}
--rw-r--r-- melissa user 105 1997-01-21 19:42 blues
--rw-r--r-- melissa user 33 1997-01-20 15:34 rock
+-rw-r--r-- melissa/user 105 1997-01-21 19:42 blues
+-rw-r--r-- melissa/user 33 1997-01-20 15:34 rock
$ @kbd{tar -tvf jazzfolk.tar}
--rw-r--r-- melissa user 20 1996-09-23 16:44 folk
--rw-r--r-- melissa user 65 1997-01-30 14:15 jazz
+-rw-r--r-- melissa/user 20 1996-09-23 16:44 folk
+-rw-r--r-- melissa/user 65 1997-01-30 14:15 jazz
@end smallexample
We can concatenate these two archives with @command{tar}:
The spirit behind the @option{--compare} (@option{--diff},
@option{-d}) option is to check whether the archive represents the
current state of files on disk, more than validating the integrity of
-the archive media. For this latter goal, @xref{verify}.
+the archive media. For this latter goal, see @ref{verify}.
@node create options
@section Options Used by @option{--create}
with @samp{/} or @samp{.}. In the latter case, the modification time
of that file will be used.
-The following example will set the modification date to 00:00:00 UTC,
+The following example will set the modification date to 00:00:00,
January 1, 1970:
@smallexample
@smallexample
$ @kbd{tar -c -f archive.tar -v --mtime=yesterday .}
-tar: Option --mtime: Treating date `yesterday' as 2006-06-20
+tar: Option --mtime: Treating date 'yesterday' as 2006-06-20
13:06:29.152478
@dots{}
@end smallexample
Specifies that @command{tar} should use @var{user} as the owner of members
when creating archives, instead of the user associated with the source
-file. The argument @var{user} can be either an existing user symbolic
-name, or a decimal numeric user @acronym{ID}.
+file.
+
+If @var{user} contains a colon, it is taken to be of the form
+@var{name}:@var{id} where a nonempty @var{name} specifies the user
+name and a nonempty @var{id} specifies the decimal numeric user
+@acronym{ID}. If @var{user} does not contain a colon, it is taken to
+be a user number if it is one or more decimal digits; otherwise it is
+taken to be a user name.
+
+If a name is given but no number, the number is inferred from the
+current host's user database if possible, and the file's user number
+is used otherwise. If a number is given but no name, the name is
+inferred from the number if possible, and an empty name is used
+otherwise. If both name and number are given, the user database is
+not consulted, and the name and number need not be valid on the
+current host.
There is no value indicating a missing number, and @samp{0} usually means
@code{root}. Some people like to force @samp{0} as the value to offer in
@opindex group
Files added to the @command{tar} archive will have a group @acronym{ID} of @var{group},
-rather than the group from the source file. The argument @var{group}
-can be either an existing group symbolic name, or a decimal numeric group @acronym{ID}.
+rather than the group from the source file. As with @option{--owner},
+the argument @var{group} can be an existing group symbolic name, or a
+decimal numeric group @acronym{ID}, or @var{name}:@var{id}.
@end table
@node Ignore Failed Read
@cindex Overwriting old files, prevention
@xopindex{keep-old-files, introduced}
To be even more cautious and prevent existing files from being replaced, use
-the @option{--keep-old-files} (@option{-k}) option. It causes @command{tar} to refuse
-to replace or update a file that already exists, i.e., a file with the
-same name as an archive member prevents extraction of that archive
-member. Instead, it reports an error.
+the @option{--keep-old-files} (@option{-k}) option. It causes
+@command{tar} to refuse to replace or update a file that already
+exists, i.e., a file with the same name as an archive member prevents
+extraction of that archive member. Instead, it reports an error. For
+example:
+
+@example
+$ @kbd{ls}
+blues
+$ @kbd{tar -x -k -f archive.tar}
+tar: blues: Cannot open: File exists
+tar: Exiting with failure status due to previous errors
+@end example
+
+@xopindex{skip-old-files, introduced}
+If you wish to preserve old files untouched, but don't want
+@command{tar} to treat them as errors, use the
+@option{--skip-old-files} option. This option causes @command{tar} to
+silently skip extracting over existing files.
@xopindex{overwrite, introduced}
To be more aggressive about altering existing files, use the
@node Keep Old Files
@unnumberedsubsubsec Keep Old Files
+@GNUTAR{} provides two options to control its actions in a situation
+when it is about to extract a file which already exists on disk.
+
@table @option
@opindex keep-old-files
@item --keep-old-files
@itemx -k
-Do not replace existing files from archive. The
-@option{--keep-old-files} (@option{-k}) option prevents @command{tar}
-from replacing existing files with files with the same name from the
-archive. The @option{--keep-old-files} option is meaningless with
-@option{--list} (@option{-t}). Prevents @command{tar} from replacing
-files in the file system during extraction.
+Do not replace existing files from archive. When such a file is
+encountered, @command{tar} issues an error message. Upon end of
+extraction, @command{tar} exits with code 2 (@pxref{exit status}).
+
+@item --skip-old-files
+Do not replace existing files from archive, but do not treat that
+as error. Such files are silently skipped and do not affect
+@command{tar} exit status.
+
+Additional verbosity can be obtained using @option{--warning=existing-file}
+together with that option (@pxref{warnings}).
@end table
@node Keep Newer Files
archive. This assumes, of course, that there is now free space, or
that you are now extracting into a different file system. (You could
also choose to suspend @command{tar}, remove unnecessary files from
-the file system, and then restart the same @command{tar} operation.
-In this case, @option{--starting-file} is not necessary.
-@xref{Incremental Dumps}, @xref{interactive}, and @ref{exclude}.)
+the file system, and then resume the same @command{tar} operation.
+In this case, @option{--starting-file} is not necessary.) See also
+@ref{interactive}, and @ref{exclude}.
@node Same Order
@unnumberedsubsubsec Same Order
The command also works using long option forms:
@smallexample
+@group
$ @kbd{(cd sourcedir; tar --create --file=- . ) \
| (cd targetdir; tar --extract --file=-)}
+@end group
@end smallexample
@noindent
or
@smallexample
-$ @kbd{tar --directory sourcedir --create --file=- . ) \
+@group
+$ @kbd{tar --directory sourcedir --create --file=- . \
| tar --directory targetdir --extract --file=-}
+@end group
@end smallexample
@noindent
Some users are enthusiastic about @code{Amanda} (The Advanced Maryland
Automatic Network Disk Archiver), a backup system developed by James
da Silva @file{jds@@cs.umd.edu} and available on many Unix systems.
-This is free software, and it is available from @uref{http://www.amanda.org}.
+This is free software, and it is available from @uref{http://www.amanda.org}.
@FIXME{
for an incremental dump. This is the default behavior. The purpose
of this option is to undo the effect of the @option{--no-check-device}
if it was given in @env{TAR_OPTIONS} environment variable
-(@pxref{TAR_OPTIONS}).
+(@pxref{TAR_OPTIONS}).
@end table
There is also another way to cope with changing device numbers. It is
@group
$ @kbd{tar cf a.tar}
tar: Cowardly refusing to create an empty archive
-Try `tar --help' or `tar --usage' for more information.
+Try 'tar --help' or 'tar --usage' for more information.
@end group
@end smallexample
Control characters, single quote and backslash are printed using
backslash notation. All names are quoted using left and right
quotation marks, appropriate to the current locale. If it does not
-define quotation marks, use @samp{`} as left and @samp{'} as right
+define quotation marks, use @samp{'} as left and as right
quotation marks. Any occurrences of the right quotation mark in a
name are escaped with @samp{\}, for example:
@smallexample
@group
$ @kbd{tar tf arch.tar --quoting-style=locale}
-`./'
-`./a space'
-`./a\'single\'quote'
-`./a"double"quote'
-`./a\\backslash'
-`./a\ttab'
-`./a\nnewline'
+'./'
+'./a space'
+'./a\'single\'quote'
+'./a"double"quote'
+'./a\\backslash'
+'./a\ttab'
+'./a\nnewline'
@end group
@end smallexample
--show-transformed /lib}
drwxr-xr-x root/root 0 2008-07-08 16:20 /usr/local/lib/
-rwxr-xr-x root/root 1250840 2008-05-25 07:44 /usr/local/lib/libc-2.3.2.so
-lrwxrwxrwx root/root 0 2008-06-24 17:12 /usr/local/lib/libc.so.6 ->
-libc-2.3.2.so
+lrwxrwxrwx root/root 0 2008-06-24 17:12 /usr/local/lib/libc.so.6 \
+ -> libc-2.3.2.so
@end smallexample
Unlike @option{--strip-components}, @option{--transform} can be used
@smallexample
@group
$ @kbd{tar -c -f archive.tar --after-date='10 days ago' .}
-tar: Option --after-date: Treating date `10 days ago' as 2006-06-11
+tar: Option --after-date: Treating date '10 days ago' as 2006-06-11
13:19:37.232434
@end group
@end smallexample
scripts for comparing both outputs. @xref{listing member and file names},
for the information on how to handle this case.}.
+Symbolic links containing @file{..} or leading @samp{/} can also cause
+problems when extracting, so @command{tar} normally extracts them last;
+it may create empty files as placeholders during extraction.
+
If you use the @option{--absolute-names} (@option{-P}) option,
@command{tar} will do none of these transformations.
@table @option
@item --absolute-names
Preserves full file names (including superior directory names) when
-archiving files. Preserves leading slash when extracting files.
+archiving and extracting files.
@end table
$ @kbd{tar -c -f archive.tar -C / home}
@end smallexample
-@include getdate.texi
+@xref{Integrity}, for some of the security-related implications
+of using this option.
+
+@include parse-datetime.texi
@node Formats
@chapter Controlling the Archive Format
a wide variety of compression programs, namely: @command{gzip},
@command{bzip2}, @command{lzip}, @command{lzma}, @command{lzop},
@command{xz} and traditional @command{compress}. The latter is
-supported mostly for backward compatibility, and we recommend
+supported mostly for backward compatibility, and we recommend
against using it, because it is by far less effective than the other
compression programs@footnote{It also had patent problems in the past.}.
create a @command{gzip} compressed archive, @option{-j}
(@option{--bzip2}) to create a @command{bzip2} compressed archive,
@option{--lzip} to create an @asis{lzip} compressed archive,
-@option{-J} (@option{--xz}) to create an @asis{XZ} archive,
+@option{-J} (@option{--xz}) to create an @asis{XZ} archive,
@option{--lzma} to create an @asis{LZMA} compressed
archive, @option{--lzop} to create an @asis{LSOP} archive, and
@option{-Z} (@option{--compress}) to use @command{compress} program.
For example:
@smallexample
-$ @kbd{tar cfz archive.tar.gz .}
+$ @kbd{tar czf archive.tar.gz .}
@end smallexample
-You can also let @GNUTAR{} select the compression program basing on
+You can also let @GNUTAR{} select the compression program based on
the suffix of the archive file name. This is done using
@option{--auto-compress} (@option{-a}) command line option. For
example, the following invocation will use @command{bzip2} for
compression:
@smallexample
-$ @kbd{tar cfa archive.tar.bz2 .}
+$ @kbd{tar caf archive.tar.bz2 .}
@end smallexample
@noindent
whereas the following one will use @command{lzma}:
@smallexample
-$ @kbd{tar cfa archive.tar.lzma .}
+$ @kbd{tar caf archive.tar.lzma .}
@end smallexample
For a complete list of file name suffixes recognized by @GNUTAR{},
-@ref{auto-compress}.
+see @ref{auto-compress}.
Reading compressed archive is even simpler: you don't need to specify
any additional options as @GNUTAR{} recognizes its format
special byte sequences in the beginning of file, that are specific for
certain compression formats. If this approach fails, @command{tar}
falls back to using archive name suffix to determine its format
-(@xref{auto-compress}, for a list of recognized suffixes).
+(@pxref{auto-compress}, for a list of recognized suffixes).
+
+@anchor{alternative decompression programs}
+@cindex alternative decompression programs
+Some compression programs are able to handle different compression
+formats. @GNUTAR{} uses this, if the principal decompressor for the
+given format is not available. For example, if @command{compress} is
+not installed, @command{tar} will try to use @command{gzip}. As of
+version @value{VERSION} the following alternatives are
+tried@footnote{To verbosely trace the decompressor selection, use the
+@option{--warning=decompress-program} option
+(@pxref{warnings,decompress-program}).}:
+
+@multitable @columnfractions 0.3 0.3 0.3
+@headitem Format @tab Main decompressor @tab Alternatives
+@item compress @tab compress @tab gzip
+@item lzma @tab lzma @tab xz
+@item bzip2 @tab bzip2 @tab lbzip2
+@end multitable
The only case when you have to specify a decompression option while
reading the archive is when reading from a pipe or from a tape drive
invocation of @GNUTAR{}:
@smallexample
-$ @kbd{cat archive.tar.gz | tar tfz -}
+$ @kbd{cat archive.tar.gz | tar tzf -}
@end smallexample
Notice also, that there are several restrictions on operations on
@option{--concatenate} (@option{-A}). Secondly, multi-volume
archives cannot be compressed.
-The following table summarizes compression options used by @GNUTAR{}.
+The following options allow to select a particular compressor program:
@table @option
-@anchor{auto-compress}
-@opindex auto-compress
-@item --auto-compress
-@itemx -a
-Select a compression program to use by the archive file name
-suffix. The following suffixes are recognized:
-
-@multitable @columnfractions 0.3 0.6
-@headitem Suffix @tab Compression program
-@item @samp{.gz} @tab @command{gzip}
-@item @samp{.tgz} @tab @command{gzip}
-@item @samp{.taz} @tab @command{gzip}
-@item @samp{.Z} @tab @command{compress}
-@item @samp{.taZ} @tab @command{compress}
-@item @samp{.bz2} @tab @command{bzip2}
-@item @samp{.tz2} @tab @command{bzip2}
-@item @samp{.tbz2} @tab @command{bzip2}
-@item @samp{.tbz} @tab @command{bzip2}
-@item @samp{.lz} @tab @command{lzip}
-@item @samp{.lzma} @tab @command{lzma}
-@item @samp{.tlz} @tab @command{lzma}
-@item @samp{.lzo} @tab @command{lzop}
-@item @samp{.xz} @tab @command{xz}
-@end multitable
-
@opindex gzip
@opindex ungzip
@item -z
@itemx --ungzip
Filter the archive through @command{gzip}.
-You can use @option{--gzip} and @option{--gunzip} on physical devices
-(tape drives, etc.) and remote files as well as on normal files; data
-to or from such devices or remote files is reblocked by another copy
-of the @command{tar} program to enforce the specified (or default) record
-size. The default compression parameters are used; if you need to
-override them, set @env{GZIP} environment variable, e.g.:
-
-@smallexample
-$ @kbd{GZIP=--best tar cfz archive.tar.gz subdir}
-@end smallexample
-
-@noindent
-Another way would be to avoid the @option{--gzip} (@option{--gunzip}, @option{--ungzip}, @option{-z}) option and run
-@command{gzip} explicitly:
-
-@smallexample
-$ @kbd{tar cf - subdir | gzip --best -c - > archive.tar.gz}
-@end smallexample
-
-@cindex corrupted archives
-About corrupted compressed archives: @command{gzip}'ed files have no
-redundancy, for maximum compression. The adaptive nature of the
-compression scheme means that the compression tables are implicitly
-spread all over the archive. If you lose a few blocks, the dynamic
-construction of the compression tables becomes unsynchronized, and there
-is little chance that you could recover later in the archive.
-
-There are pending suggestions for having a per-volume or per-file
-compression in @GNUTAR{}. This would allow for viewing the
-contents without decompression, and for resynchronizing decompression at
-every volume or file, in case of corrupted archives. Doing so, we might
-lose some compressibility. But this would have make recovering easier.
-So, there are pros and cons. We'll see!
-
-@opindex bzip2
+@opindex xz
@item -J
@itemx --xz
-Filter the archive through @code{xz}. Otherwise like
-@option{--gzip}.
+Filter the archive through @code{xz}.
@item -j
@itemx --bzip2
-Filter the archive through @code{bzip2}. Otherwise like @option{--gzip}.
+Filter the archive through @code{bzip2}.
@opindex lzip
@item --lzip
-Filter the archive through @command{lzip}. Otherwise like @option{--gzip}.
+Filter the archive through @command{lzip}.
@opindex lzma
@item --lzma
-Filter the archive through @command{lzma}. Otherwise like @option{--gzip}.
+Filter the archive through @command{lzma}.
@opindex lzop
@item --lzop
-Filter the archive through @command{lzop}. Otherwise like
-@option{--gzip}.
+Filter the archive through @command{lzop}.
@opindex compress
@opindex uncompress
@item -Z
@itemx --compress
@itemx --uncompress
-Filter the archive through @command{compress}. Otherwise like @option{--gzip}.
+Filter the archive through @command{compress}.
+@end table
+
+When any of these options is given, @GNUTAR{} searches the compressor
+binary in the current path and invokes it. The name of the compressor
+program is specified at compilation time using a corresponding
+@option{--with-@var{compname}} option to @command{configure}, e.g.
+@option{--with-bzip2} to select a specific @command{bzip2} binary.
+@xref{lbzip2}, for a detailed discussion.
+
+The output produced by @command{tar --help} shows the actual
+compressor names along with each of these options.
+
+You can use any of these options on physical devices (tape drives,
+etc.) and remote files as well as on normal files; data to or from
+such devices or remote files is reblocked by another copy of the
+@command{tar} program to enforce the specified (or default) record
+size. The default compression parameters are used. Most compression
+programs let you override these by setting a program-specific
+environment variable. For example, with @command{gzip} you can set
+@env{GZIP}:
+
+@smallexample
+$ @kbd{GZIP='-9 -n' tar czf archive.tar.gz subdir}
+@end smallexample
+
+@noindent
+The traditional way to do this is to use a pipe:
+
+@smallexample
+$ @kbd{tar cf - subdir | gzip -9 -n > archive.tar.gz}
+@end smallexample
+
+@cindex corrupted archives
+Compressed archives are easily corrupted, because compressed files
+have little redundancy. The adaptive nature of the
+compression scheme means that the compression tables are implicitly
+spread all over the archive. If you lose a few blocks, the dynamic
+construction of the compression tables becomes unsynchronized, and there
+is little chance that you could recover later in the archive.
+
+Other compression options provide better control over creating
+compressed archives. These are:
+
+@table @option
+@anchor{auto-compress}
+@opindex auto-compress
+@item --auto-compress
+@itemx -a
+Select a compression program to use by the archive file name
+suffix. The following suffixes are recognized:
+
+@multitable @columnfractions 0.3 0.6
+@headitem Suffix @tab Compression program
+@item @samp{.gz} @tab @command{gzip}
+@item @samp{.tgz} @tab @command{gzip}
+@item @samp{.taz} @tab @command{gzip}
+@item @samp{.Z} @tab @command{compress}
+@item @samp{.taZ} @tab @command{compress}
+@item @samp{.bz2} @tab @command{bzip2}
+@item @samp{.tz2} @tab @command{bzip2}
+@item @samp{.tbz2} @tab @command{bzip2}
+@item @samp{.tbz} @tab @command{bzip2}
+@item @samp{.lz} @tab @command{lzip}
+@item @samp{.lzma} @tab @command{lzma}
+@item @samp{.tlz} @tab @command{lzma}
+@item @samp{.lzo} @tab @command{lzop}
+@item @samp{.xz} @tab @command{xz}
+@end multitable
@opindex use-compress-program
@item --use-compress-program=@var{prog}
Use external compression program @var{prog}. Use this option if you
are not happy with the compression program associated with the suffix
at compile time or if you have a compression program that @GNUTAR{}
-does not support. There are two requirements to which @var{prog}
-should comply:
+does not support. The program should follow two conventions:
-First, when called without options, it should read data from standard
+First, when invoked without options, it should read data from standard
input, compress it and output it on standard output.
-Secondly, if called with @option{-d} argument, it should do exactly
+Secondly, if invoked with the @option{-d} option, it should do exactly
the opposite, i.e., read the compressed data from the standard input
and produce uncompressed data on the standard output.
@end table
end up with less space on the tape.
@end ignore
+@menu
+* lbzip2:: Using lbzip2 with @GNUTAR{}.
+@end menu
+
+@node lbzip2
+@subsubsection Using lbzip2 with @GNUTAR{}.
+@cindex lbzip2
+@cindex Laszlo Ersek
+ @command{Lbzip2} is a multithreaded utility for handling
+@samp{bzip2} compression, written by Laszlo Ersek. It makes use of
+multiple processors to speed up its operation and in general works
+considerably faster than @command{bzip2}. For a detailed description
+of @command{lbzip2} see @uref{http://freshmeat.net/@/projects/@/lbzip2} and
+@uref{http://www.linuxinsight.com/@/lbzip2-parallel-bzip2-utility.html,
+lbzip2: parallel bzip2 utility}.
+
+ Recent versions of @command{lbzip2} are mostly command line compatible
+with @command{bzip2}, which makes it possible to automatically invoke
+it via the @option{--bzip2} @GNUTAR{} command line option. To do so,
+@GNUTAR{} must be configured with the @option{--with-bzip2} command
+line option, like this:
+
+@smallexample
+$ @kbd{./configure --with-bzip2=lbzip2 [@var{other-options}]}
+@end smallexample
+
+ Once configured and compiled this way, @command{tar --help} will show the
+following:
+
+@smallexample
+@group
+$ @kbd{tar --help | grep -- --bzip2}
+ -j, --bzip2 filter the archive through lbzip2
+@end group
+@end smallexample
+
+@noindent
+which means that running @command{tar --bzip2} will invoke @command{lbzip2}.
+
@node sparse
@subsection Archiving Sparse Files
@cindex Sparse Files
Normally, when @command{tar} archives a symbolic link, it writes a
block to the archive naming the target of the link. In that way, the
@command{tar} archive is a faithful record of the file system contents.
-@option{--dereference} (@option{-h}) is used with @option{--create} (@option{-c}), and causes
-@command{tar} to archive the files symbolic links point to, instead of
-the links themselves. When this option is used, when @command{tar}
-encounters a symbolic link, it will archive the linked-to file,
-instead of simply recording the presence of a symbolic link.
-
-The name under which the file is stored in the file system is not
-recorded in the archive. To record both the symbolic link name and
-the file name in the system, archive the file under both names. If
-all links were recorded automatically by @command{tar}, an extracted file
-might be linked to a file name that no longer exists in the file
-system.
-
-If a linked-to file is encountered again by @command{tar} while creating
-the same archive, an entire second copy of it will be stored. (This
-@emph{might} be considered a bug.)
+When @option{--dereference} (@option{-h}) is used with
+@option{--create} (@option{-c}), @command{tar} archives the files
+symbolic links point to, instead of
+the links themselves.
-So, for portable archives, do not archive symbolic links as such,
-and use @option{--dereference} (@option{-h}): many systems do not support
+When creating portable archives, use @option{--dereference}
+(@option{-h}): some systems do not support
symbolic links, and moreover, your distribution might be unusable if
it contains unresolved symbolic links.
+When reading from an archive, the @option{--dereference} (@option{-h})
+option causes @command{tar} to follow an already-existing symbolic
+link when @command{tar} writes or reads a file named in the archive.
+Ordinarily, @command{tar} does not follow such a link, though it may
+remove the link before writing a new file. @xref{Dealing with Old
+Files}.
+
+The @option{--dereference} option is unsafe if an untrusted user can
+modify directories while @command{tar} is running. @xref{Security}.
+
@node hard links
@subsection Hard Links
@cindex File names, using hard links
@smallexample
@group
-$ ls
--rw-r--r-- 2 gray staff 4 2007-10-30 15:11 one
--rw-r--r-- 2 gray staff 4 2007-10-30 15:11 jeden
+$ ls -l
+-rw-r--r-- 2 gray staff 4 2007-10-30 15:11 one
+-rw-r--r-- 2 gray staff 4 2007-10-30 15:11 jeden
@end group
@end smallexample
the following:
@smallexample
-$ tar cfvv ../archive.tar .
+$ tar cvvf ../archive.tar .
drwxr-xr-x gray/staff 0 2007-10-30 15:13 ./
-rw-r--r-- gray/staff 4 2007-10-30 15:11 ./jeden
hrw-r--r-- gray/staff 0 2007-10-30 15:11 ./one link to ./jeden
@smallexample
$ tar -c -f ../archive.tar -l jeden
-tar: Missing links to `jeden'.
+tar: Missing links to 'jeden'.
@end smallexample
Although creating special records for hard links helps keep a faithful
@smallexample
$ tar xf archive.tar ./one
-tar: ./one: Cannot hard link to `./jeden': No such file or directory
+tar: ./one: Cannot hard link to './jeden': No such file or directory
tar: Error exit delayed from previous errors
@end smallexample
@cindex ustar archive format
Archive format defined by @acronym{POSIX}.1-1988 specification is called
@code{ustar}. Although it is more flexible than the V7 format, it
-still has many restrictions (@xref{Formats,ustar}, for the detailed
+still has many restrictions (@pxref{Formats,ustar}, for the detailed
description of @code{ustar} format). Along with V7 format,
@code{ustar} format is a good choice for archives intended to be read
with other implementations of @command{tar}.
additional data will be needed to restore it. If the original file
name was @file{@var{dir}/@var{name}}, then the condensed file will be
named @file{@var{dir}/@/GNUSparseFile.@var{n}/@/@var{name}}, where
-@var{n} is a decimal number@footnote{technically speaking, @var{n} is a
+@var{n} is a decimal number@footnote{Technically speaking, @var{n} is a
@dfn{process @acronym{ID}} of the @command{tar} process which created the
archive (@pxref{PAX keywords}).}.
@group
$ @kbd{xsparse -n /home/gray/GNUSparseFile.6058/sparsefile}
Reading v.1.0 sparse map
-Expanding file `/home/gray/GNUSparseFile.6058/sparsefile' to
-`/home/gray/sparsefile'
+Expanding file '/home/gray/GNUSparseFile.6058/sparsefile' to
+'/home/gray/sparsefile'
Finished dry run
@end group
@end smallexample
@group
$ @kbd{xsparse -v /home/gray/GNUSparseFile.6058/sparsefile}
Reading v.1.0 sparse map
-Expanding file `/home/gray/GNUSparseFile.6058/sparsefile' to
-`/home/gray/sparsefile'
+Expanding file '/home/gray/GNUSparseFile.6058/sparsefile' to
+'/home/gray/sparsefile'
Done
@end group
@end smallexample
Found variable GNU.sparse.name = sparsefile
Found variable GNU.sparse.realsize = 217481216
Reading v.1.0 sparse map
-Expanding file `/home/gray/GNUSparseFile.6058/sparsefile' to
-`/home/gray/sparsefile'
+Expanding file '/home/gray/GNUSparseFile.6058/sparsefile' to
+'/home/gray/sparsefile'
Done
@end group
@end smallexample
Found variable GNU.sparse.numblocks = 208
Found variable GNU.sparse.name = sparsefile
Found variable GNU.sparse.map = 0,2048,1050624,2048,@dots{}
-Expanding file `GNUSparseFile.28124/sparsefile' to `sparsefile'
+Expanding file 'GNUSparseFile.28124/sparsefile' to 'sparsefile'
Done
@end group
@end smallexample
@xopindex{tape-length, short description}
@item -L @var{num}
-@itemx --tape-length=@var{num}
-Change tape after writing @var{num} x 1024 bytes.
+@itemx --tape-length=@var{size}[@var{suf}]
+Change tape after writing @var{size} units of data. Unless @var{suf} is
+given, @var{size} is treated as kilobytes, i.e. @samp{@var{size} x
+1024} bytes. The following suffixes alter this behavior:
+
+@float Table, size-suffixes
+@caption{Size Suffixes}
+@multitable @columnfractions 0.2 0.3 0.3
+@headitem Suffix @tab Units @tab Byte Equivalent
+@item b @tab Blocks @tab @var{size} x 512
+@item B @tab Kilobytes @tab @var{size} x 1024
+@item c @tab Bytes @tab @var{size}
+@item G @tab Gigabytes @tab @var{size} x 1024^3
+@item K @tab Kilobytes @tab @var{size} x 1024
+@item k @tab Kilobytes @tab @var{size} x 1024
+@item M @tab Megabytes @tab @var{size} x 1024^2
+@item P @tab Petabytes @tab @var{size} x 1024^5
+@item T @tab Terabytes @tab @var{size} x 1024^4
+@item w @tab Words @tab @var{size} x 2
+@end multitable
+@end float
This option might be useful when your tape drivers do not properly
detect end of physical tapes. By being slightly conservative on the
@command{rsh} or @command{remsh} to the remote machine, optionally
using a different login name if one is supplied.
-A copy of the source for the remote tape server is provided. It is
-Copyright @copyright{} 1983 by the Regents of the University of
-California, but can be freely distributed. It is compiled and
+A copy of the source for the remote tape server is provided. Its
+source code can be freely distributed. It is compiled and
installed by default.
@cindex absolute file names
@anchor{tape-length}
@table @option
@opindex tape-length
-@item --tape-length=@var{size}
-@itemx -L @var{size}
-Set maximum length of a volume. The @var{size} argument should then
-be the usable size of the tape in units of 1024 bytes. This option
-selects @option{--multi-volume} automatically. For example:
+@item --tape-length=@var{size}[@var{suf}]
+@itemx -L @var{size}[@var{suf}]
+Set maximum length of a volume. The @var{suf}, if given, specifies
+units in which @var{size} is expressed, e.g. @samp{2M} mean 2
+megabytes (@pxref{size-suffixes}, for a list of allowed size
+suffixes). Without @var{suf}, units of 1024 bytes (kilobyte) are
+assumed.
+
+This option selects @option{--multi-volume} automatically. For example:
@smallexample
$ @kbd{tar --create --tape-length=41943040 --file=/dev/tape @var{files}}
@end smallexample
+
+@noindent
+or, which is equivalent:
+
+@smallexample
+$ @kbd{tar --create --tape-length=4G --file=/dev/tape @var{files}}
+@end smallexample
@end table
@anchor{change volume prompt}
translation to the locale's language will be used.}:
@smallexample
-Prepare volume #@var{n} for `@var{archive}' and hit return:
+Prepare volume #@var{n} for '@var{archive}' and hit return:
@end smallexample
@noindent
@smallexample
$ @kbd{tar --create --multi-volume --file=/dev/tape0 --file=/dev/tape1 @var{files}}
-$ @kbd{tar cMff /dev/tape0 /dev/tape1 @var{files}}
+$ @kbd{tar -cM -f /dev/tape0 -f /dev/tape1 @var{files}}
@end smallexample
The second method is to use the @samp{n} response to the tape-change
@smallexample
@group
-#! /bin/sh
+#! /bin/bash
+# For this script it's advisable to use a shell, such as Bash,
+# that supports a TAR_FD value greater than 9.
+
echo Preparing volume $TAR_VOLUME of $TAR_ARCHIVE.
name=`expr $TAR_ARCHIVE : '\(.*\)-.*'`
@option{--multi-volume} (@pxref{Using Multiple Tapes}), then the
volume label will have @samp{Volume @var{nnn}} appended to the name
you give, where @var{nnn} is the number of the volume of the archive.
-If you use the @option{--label=@var{volume-label}}) option when
+If you use the @option{--label=@var{volume-label}} option when
reading an archive, it checks to make sure the label on the tape
-matches the one you give. @xref{label}.
+matches the one you gave. @xref{label}.
When @command{tar} writes an archive to tape, it creates a single
tape file. If multiple archives are written to the same tape, one
@cindex Labeling an archive
@cindex Labels on the archive media
@cindex Labeling multi-volume archives
-@UNREVISED
@opindex label
To avoid problems caused by misplaced paper labels on the archive
-media, you can include a @dfn{label} entry---an archive member which
-contains the name of the archive---in the archive itself. Use the
+media, you can include a @dfn{label} entry --- an archive member which
+contains the name of the archive --- in the archive itself. Use the
@option{--label=@var{archive-label}} (@option{-V @var{archive-label}})
-option in conjunction with the @option{--create} operation to include
-a label entry in the archive as it is being created.
+option@footnote{Until version 1.10, that option was called
+@option{--volume}, but is not available under that name anymore.} in
+conjunction with the @option{--create} operation to include a label
+entry in the archive as it is being created.
@table @option
@item --label=@var{archive-label}
@smallexample
@group
$ @kbd{tar --verbose --list --file=iamanarchive}
-V--------- 0 0 0 1992-03-07 12:01 iamalabel--Volume Header--
--rw-r--r-- ringo user 40 1990-05-21 13:30 iamafilename
+V--------- 0/0 0 1992-03-07 12:01 iamalabel--Volume Header--
+-rw-r--r-- ringo/user 40 1990-05-21 13:30 iamafilename
@end group
@end smallexample
However, @option{--list} option will cause listing entire
contents of the archive, which may be undesirable (for example, if the
archive is stored on a tape). You can request checking only the volume
-by specifying @option{--test-label} option. This option reads only the
+label by specifying @option{--test-label} option. This option reads only the
first block of an archive, so it can be used with slow storage
devices. For example:
@end group
@end smallexample
- If @option{--test-label} is used with a single command line
-argument, @command{tar} compares the volume label with the
-argument. It exits with code 0 if the two strings match, and with code
-2 otherwise. In this case no output is displayed. For example:
+ If @option{--test-label} is used with one or more command line
+arguments, @command{tar} compares the volume label with each
+argument. It exits with code 0 if a match is found, and with code 1
+otherwise@footnote{Note that @GNUTAR{} versions up to 1.23 indicated
+mismatch with an exit code 2 and printed a spurious diagnostics on
+stderr.}. No output is displayed, unless you also used the
+@option{--verbose} option. For example:
+
+@smallexample
+@group
+$ @kbd{tar --test-label --file=iamanarchive 'iamalabel'}
+@result{} 0
+$ @kbd{tar --test-label --file=iamanarchive 'alabel'}
+@result{} 1
+@end group
+@end smallexample
+
+ When used with the @option{--verbose} option, @command{tar}
+prints the actual volume label (if any), and a verbose diagnostics in
+case of a mismatch:
@smallexample
@group
-$ @kbd{tar --test-label --file=iamanarchive 'iamalable'}
+$ @kbd{tar --test-label --verbose --file=iamanarchive 'iamalabel'}
+iamalabel
@result{} 0
-$ @kbd{tar --test-label --file=iamanarchive 'iamalable' alabel}
+$ @kbd{tar --test-label --verbose --file=iamanarchive 'alabel'}
+iamalabel
+tar: Archive label mismatch
@result{} 1
@end group
@end smallexample
@smallexample
@group
$ @kbd{tar -rf archive --label 'My volume' .}
-tar: Archive not labeled to match `My volume'
+tar: Archive not labeled to match 'My volume'
@end group
@end smallexample
creation time, it sounded logical to equally help the user taking care
of it when the archive is being read.
- The @option{--label} was once called @option{--volume}, but is not
-available under that name anymore.
-
You can also use @option{--label} to get a common information on
all tapes of a series. For having this information different in each
series created through a single script used on a regular basis, just
@smallexample
@group
-$ @kbd{tar cfMV /dev/tape "Daily backup for `date +%Y-%m-%d`"}
+$ @kbd{tar -cM -f /dev/tape -V "Daily backup for `date +%Y-%m-%d`"}
$ @kbd{tar --create --file=/dev/tape --multi-volume \
--label="Daily backup for `date +%Y-%m-%d`"}
@end group
@end smallexample
- Also note that each label has its own date and time, which corresponds
-to when @GNUTAR{} initially attempted to write it,
+ Some more notes about volume labels:
+
+@itemize @bullet
+@item Each label has its own date and time, which corresponds
+to the time when @GNUTAR{} initially attempted to write it,
often soon after the operator launches @command{tar} or types the
-carriage return telling that the next tape is ready. Comparing date
-labels does give an idea of tape throughput only if the delays for
-rewinding tapes and the operator switching them were negligible, which
-is usually not the case.
+carriage return telling that the next tape is ready.
+
+@item Comparing date labels to get an idea of tape throughput is
+unreliable. It gives correct results only if the delays for rewinding
+tapes and the operator switching them were negligible, which is
+usually not the case.
+@end itemize
@node verify
@section Verifying Data as It is Stored
which can be removed from the center of a tape reel, or some other
changeable feature.
+@node Reliability and security
+@chapter Reliability and Security
+
+The @command{tar} command reads and writes files as any other
+application does, and is subject to the usual caveats about
+reliability and security. This section contains some commonsense
+advice on the topic.
+
+@menu
+* Reliability::
+* Security::
+@end menu
+
+@node Reliability
+@section Reliability
+
+Ideally, when @command{tar} is creating an archive, it reads from a
+file system that is not being modified, and encounters no errors or
+inconsistencies while reading and writing. If this is the case, the
+archive should faithfully reflect what was read. Similarly, when
+extracting from an archive, ideally @command{tar} ideally encounters
+no errors and the extracted files faithfully reflect what was in the
+archive.
+
+However, when reading or writing real-world file systems, several
+things can go wrong; these include permissions problems, corruption of
+data, and race conditions.
+
+@menu
+* Permissions problems::
+* Data corruption and repair::
+* Race conditions::
+@end menu
+
+@node Permissions problems
+@subsection Permissions Problems
+
+If @command{tar} encounters errors while reading or writing files, it
+normally reports an error and exits with nonzero status. The work it
+does may therefore be incomplete. For example, when creating an
+archive, if @command{tar} cannot read a file then it cannot copy the
+file into the archive.
+
+@node Data corruption and repair
+@subsection Data Corruption and Repair
+
+If an archive becomes corrupted by an I/O error, this may corrupt the
+data in an extracted file. Worse, it may corrupt the file's metadata,
+which may cause later parts of the archive to become misinterpreted.
+An tar-format archive contains a checksum that most likely will detect
+errors in the metadata, but it will not detect errors in the data.
+
+If data corruption is a concern, you can compute and check your own
+checksums of an archive by using other programs, such as
+@command{cksum}.
+
+When attempting to recover from a read error or data corruption in an
+archive, you may need to skip past the questionable data and read the
+rest of the archive. This requires some expertise in the archive
+format and in other software tools.
+
+@node Race conditions
+@subsection Race conditions
+
+If some other process is modifying the file system while @command{tar}
+is reading or writing files, the result may well be inconsistent due
+to race conditions. For example, if another process creates some
+files in a directory while @command{tar} is creating an archive
+containing the directory's files, @command{tar} may see some of the
+files but not others, or it may see a file that is in the process of
+being created. The resulting archive may not be a snapshot of the
+file system at any point in time. If an application such as a
+database system depends on an accurate snapshot, restoring from the
+@command{tar} archive of a live file system may therefore break that
+consistency and may break the application. The simplest way to avoid
+the consistency issues is to avoid making other changes to the file
+system while tar is reading it or writing it.
+
+When creating an archive, several options are available to avoid race
+conditions. Some hosts have a way of snapshotting a file system, or
+of temporarily suspending all changes to a file system, by (say)
+suspending the only virtual machine that can modify a file system; if
+you use these facilities and have @command{tar -c} read from a
+snapshot when creating an archive, you can avoid inconsistency
+problems. More drastically, before starting @command{tar} you could
+suspend or shut down all processes other than @command{tar} that have
+access to the file system, or you could unmount the file system and
+then mount it read-only.
+
+When extracting from an archive, one approach to avoid race conditions
+is to create a directory that no other process can write to, and
+extract into that.
+
+@node Security
+@section Security
+
+In some cases @command{tar} may be used in an adversarial situation,
+where an untrusted user is attempting to gain information about or
+modify otherwise-inaccessible files. Dealing with untrusted data
+(that is, data generated by an untrusted user) typically requires
+extra care, because even the smallest mistake in the use of
+@command{tar} is more likely to be exploited by an adversary than by a
+race condition.
+
+@menu
+* Privacy::
+* Integrity::
+* Live untrusted data::
+* Security rules of thumb::
+@end menu
+
+@node Privacy
+@subsection Privacy
+
+Standard privacy concerns apply when using @command{tar}. For
+example, suppose you are archiving your home directory into a file
+@file{/archive/myhome.tar}. Any secret information in your home
+directory, such as your SSH secret keys, are copied faithfully into
+the archive. Therefore, if your home directory contains any file that
+should not be read by some other user, the archive itself should be
+not be readable by that user. And even if the archive's data are
+inaccessible to untrusted users, its metadata (such as size or
+last-modified date) may reveal some information about your home
+directory; if the metadata are intended to be private, the archive's
+parent directory should also be inaccessible to untrusted users.
+
+One precaution is to create @file{/archive} so that it is not
+accessible to any user, unless that user also has permission to access
+all the files in your home directory.
+
+Similarly, when extracting from an archive, take care that the
+permissions of the extracted files are not more generous than what you
+want. Even if the archive itself is readable only to you, files
+extracted from it have their own permissions that may differ.
+
+@node Integrity
+@subsection Integrity
+
+When creating archives, take care that they are not writable by a
+untrusted user; otherwise, that user could modify the archive, and
+when you later extract from the archive you will get incorrect data.
+
+When @command{tar} extracts from an archive, by default it writes into
+files relative to the working directory. If the archive was generated
+by an untrusted user, that user therefore can write into any file
+under the working directory. If the working directory contains a
+symbolic link to another directory, the untrusted user can also write
+into any file under the referenced directory. When extracting from an
+untrusted archive, it is therefore good practice to create an empty
+directory and run @command{tar} in that directory.
+
+When extracting from two or more untrusted archives, each one should
+be extracted independently, into different empty directories.
+Otherwise, the first archive could create a symbolic link into an area
+outside the working directory, and the second one could follow the
+link and overwrite data that is not under the working directory. For
+example, when restoring from a series of incremental dumps, the
+archives should have been created by a trusted process, as otherwise
+the incremental restores might alter data outside the working
+directory.
+
+If you use the @option{--absolute-names} (@option{-P}) option when
+extracting, @command{tar} respects any file names in the archive, even
+file names that begin with @file{/} or contain @file{..}. As this
+lets the archive overwrite any file in your system that you can write,
+the @option{--absolute-names} (@option{-P}) option should be used only
+for trusted archives.
+
+Conversely, with the @option{--keep-old-files} (@option{-k}) and
+@option{--skip-old-files} options, @command{tar} refuses to replace
+existing files when extracting. The difference between the two
+options is that the former treats existing files as errors whereas the
+latter just silently ignores them.
+
+Finally, with the @option{--no-overwrite-dir} option, @command{tar}
+refuses to replace the permissions or ownership of already-existing
+directories. These options may help when extracting from untrusted
+archives.
+
+@node Live untrusted data
+@subsection Dealing with Live Untrusted Data
+
+Extra care is required when creating from or extracting into a file
+system that is accessible to untrusted users. For example, superusers
+who invoke @command{tar} must be wary about its actions being hijacked
+by an adversary who is reading or writing the file system at the same
+time that @command{tar} is operating.
+
+When creating an archive from a live file system, @command{tar} is
+vulnerable to denial-of-service attacks. For example, an adversarial
+user could create the illusion of an indefinitely-deep directory
+hierarchy @file{d/e/f/g/...} by creating directories one step ahead of
+@command{tar}, or the illusion of an indefinitely-long file by
+creating a sparse file but arranging for blocks to be allocated just
+before @command{tar} reads them. There is no easy way for
+@command{tar} to distinguish these scenarios from legitimate uses, so
+you may need to monitor @command{tar}, just as you'd need to monitor
+any other system service, to detect such attacks.
+
+While a superuser is extracting from an archive into a live file
+system, an untrusted user might replace a directory with a symbolic
+link, in hopes that @command{tar} will follow the symbolic link and
+extract data into files that the untrusted user does not have access
+to. Even if the archive was generated by the superuser, it may
+contain a file such as @file{d/etc/passwd} that the untrusted user
+earlier created in order to break in; if the untrusted user replaces
+the directory @file{d/etc} with a symbolic link to @file{/etc} while
+@command{tar} is running, @command{tar} will overwrite
+@file{/etc/passwd}. This attack can be prevented by extracting into a
+directory that is inaccessible to untrusted users.
+
+Similar attacks via symbolic links are also possible when creating an
+archive, if the untrusted user can modify an ancestor of a top-level
+argument of @command{tar}. For example, an untrusted user that can
+modify @file{/home/eve} can hijack a running instance of @samp{tar -cf
+- /home/eve/Documents/yesterday} by replacing
+@file{/home/eve/Documents} with a symbolic link to some other
+location. Attacks like these can be prevented by making sure that
+untrusted users cannot modify any files that are top-level arguments
+to @command{tar}, or any ancestor directories of these files.
+
+@node Security rules of thumb
+@subsection Security Rules of Thumb
+
+This section briefly summarizes rules of thumb for avoiding security
+pitfalls.
+
+@itemize @bullet
+
+@item
+Protect archives at least as much as you protect any of the files
+being archived.
+
+@item
+Extract from an untrusted archive only into an otherwise-empty
+directory. This directory and its parent should be accessible only to
+trusted users. For example:
+
+@example
+@group
+$ @kbd{chmod go-rwx .}
+$ @kbd{mkdir -m go-rwx dir}
+$ @kbd{cd dir}
+$ @kbd{tar -xvf /archives/got-it-off-the-net.tar.gz}
+@end group
+@end example
+
+As a corollary, do not do an incremental restore from an untrusted archive.
+
+@item
+Do not let untrusted users access files extracted from untrusted
+archives without checking first for problems such as setuid programs.
+
+@item
+Do not let untrusted users modify directories that are ancestors of
+top-level arguments of @command{tar}. For example, while you are
+executing @samp{tar -cf /archive/u-home.tar /u/home}, do not let an
+untrusted user modify @file{/}, @file{/archive}, or @file{/u}.
+
+@item
+Pay attention to the diagnostics and exit status of @command{tar}.
+
+@item
+When archiving live file systems, monitor running instances of
+@command{tar} to detect denial-of-service attacks.
+
+@item
+Avoid unusual options such as @option{--absolute-names} (@option{-P}),
+@option{--dereference} (@option{-h}), @option{--overwrite},
+@option{--recursive-unlink}, and @option{--remove-files} unless you
+understand their security implications.
+
+@end itemize
+
@node Changes
@appendix Changes
@appendix Free Software Needs Free Documentation
@include freemanuals.texi
-@node Copying This Manual
-@appendix Copying This Manual
-
-@menu
-* GNU Free Documentation License:: License for copying this manual
-@end menu
+@node GNU Free Documentation License
+@appendix GNU Free Documentation License
@include fdl.texi
This appendix contains an index of all @GNUTAR{} long command line
options. The options are listed without the preceding double-dash.
-For a cross-reference of short command line options, @ref{Short Option Summary}.
+For a cross-reference of short command line options, see
+@ref{Short Option Summary}.
@printindex op
projects / chaz / tar / blobdiff