/* Buffer management for tar.
- Copyright 1988, 92, 93, 94, 96, 97, 99, 2000 Free Software Foundation, Inc.
+
+ Copyright (C) 1988, 1992, 1993, 1994, 1996, 1997, 1999, 2000, 2001,
+ 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+ Foundation, Inc.
+
Written by John Gilmore, on 1985-08-25.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2, or (at your option) any later
+ Free Software Foundation; either version 3, or (at your option) any later
version.
This program is distributed in the hope that it will be useful, but
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
-#include "system.h"
+#include <system.h>
+#include <system-ioctl.h>
#include <signal.h>
-#include <time.h>
-#ifndef time
-time_t time ();
-#endif
-
-#if MSDOS
-# include <process.h>
-#endif
-
-#if XENIX
-# include <sys/inode.h>
-#endif
+#include <closeout.h>
#include <fnmatch.h>
#include <human.h>
#include <quotearg.h>
#include "common.h"
-#include "rmt.h"
-
-#define PREAD 0 /* read file descriptor from pipe() */
-#define PWRITE 1 /* write file descriptor from pipe() */
+#include <rmt.h>
/* Number of retries before giving up on read. */
-#define READ_ERROR_MAX 10
+#define READ_ERROR_MAX 10
-/* Globbing pattern to append to volume label if initial match failed. */
-#define VOLUME_LABEL_APPEND " Volume [1-9]*"
-\f
/* Variables. */
-static tarlong prev_written; /* bytes written on previous volumes */
-static tarlong bytes_written; /* bytes written on this volume */
+static tarlong prev_written; /* bytes written on previous volumes */
+static tarlong bytes_written; /* bytes written on this volume */
+static void *record_buffer[2]; /* allocated memory */
+union block *record_buffer_aligned[2];
+static int record_index;
-/* FIXME: The following four variables should ideally be static to this
- module. However, this cannot be done yet, as update.c uses the first
- three a lot, and compare.c uses the fourth. The cleanup continues! */
+/* FIXME: The following variables should ideally be static to this
+ module. However, this cannot be done yet. The cleanup continues! */
-union block *record_start; /* start of record of archive */
-union block *record_end; /* last+1 block of archive record */
-union block *current_block; /* current block of archive */
-enum access_mode access_mode; /* how do we handle the archive */
-static struct stat archive_stat; /* stat block for archive file */
+union block *record_start; /* start of record of archive */
+union block *record_end; /* last+1 block of archive record */
+union block *current_block; /* current block of archive */
+enum access_mode access_mode; /* how do we handle the archive */
+off_t records_read; /* number of records read from this archive */
+off_t records_written; /* likewise, for records written */
+extern off_t records_skipped; /* number of records skipped at the start
+ of the archive, defined in delete.c */
static off_t record_start_block; /* block ordinal at record_start */
-/* Where we write list messages (not errors, not interactions) to. Stdout
- unless we're writing a pipe, in which case stderr. */
+/* Where we write list messages (not errors, not interactions) to. */
FILE *stdlis;
-static void backspace_output PARAMS ((void));
-static int new_volume PARAMS ((enum access_mode));
-static void archive_write_error PARAMS ((ssize_t)) __attribute__ ((noreturn));
-static void archive_read_error PARAMS ((void));
-
-#if !MSDOS
-/* Obnoxious test to see if dimwit is trying to dump the archive. */
-dev_t ar_dev;
-ino_t ar_ino;
-#endif
+static void backspace_output (void);
/* PID of child program, if compress_option or remote archive access. */
static pid_t child_pid;
static int read_error_count;
/* Have we hit EOF yet? */
-static int hit_eof;
+static bool hit_eof;
+
+static bool read_full_records = false;
-/* Checkpointing counter */
-static int checkpoint;
+/* We're reading, but we just read the last block and it's time to update.
+ Declared in update.c
-/* We're reading, but we just read the last block and its time to update. */
-/* As least EXTERN like this one as possible. FIXME! */
-extern int time_to_start_writing;
+ As least EXTERN like this one as possible. (?? --gray)
+ FIXME: Either eliminate it or move it to common.h.
+*/
+extern bool time_to_start_writing;
-int file_to_switch_to = -1; /* if remote update, close archive, and use
- this descriptor to write to */
+bool write_archive_to_stdout;
-static int volno = 1; /* which volume of a multi-volume tape we're
- on */
-static int global_volno = 1; /* volume number to print in external
- messages */
+void (*flush_write_ptr) (size_t);
+void (*flush_read_ptr) (void);
-/* The pointer save_name, which is set in function dump_file() of module
- create.c, points to the original long filename instead of the new,
- shorter mangled name that is set in start_header() of module create.c.
- The pointer save_name is only used in multi-volume mode when the file
- being processed is non-sparse; if a file is split between volumes, the
- save_name is used in generating the LF_MULTIVOL record on the second
- volume. (From Pierce Cantrell, 1991-08-13.) */
+\f
+char *volume_label;
+char *continued_file_name;
+uintmax_t continued_file_size;
+uintmax_t continued_file_offset;
-char *save_name; /* name of the file we are currently writing */
-off_t save_totsize; /* total size of file we are writing, only
- valid if save_name is nonzero */
-off_t save_sizeleft; /* where we are in the file we are writing,
- only valid if save_name is nonzero */
+\f
+static int volno = 1; /* which volume of a multi-volume tape we're
+ on */
+static int global_volno = 1; /* volume number to print in external
+ messages */
-int write_archive_to_stdout;
+bool write_archive_to_stdout;
/* Used by flush_read and flush_write to store the real info about saved
names. */
static char *real_s_name;
static off_t real_s_totsize;
static off_t real_s_sizeleft;
+
+\f
+/* Multi-volume tracking support */
+static char *save_name; /* name of the file we are currently writing */
+static off_t save_totsize; /* total size of file we are writing, only
+ valid if save_name is nonzero */
+static off_t save_sizeleft; /* where we are in the file we are writing,
+ only valid if save_name is nonzero */
+
+\f
+static struct tar_stat_info dummy;
+
+void
+buffer_write_global_xheader ()
+{
+ xheader_write_global (&dummy.xhdr);
+}
+
+void
+mv_begin (struct tar_stat_info *st)
+{
+ if (multi_volume_option)
+ {
+ assign_string (&save_name, st->orig_file_name);
+ save_totsize = save_sizeleft = st->stat.st_size;
+ }
+}
+
+void
+mv_end ()
+{
+ if (multi_volume_option)
+ assign_string (&save_name, 0);
+}
+
+void
+mv_total_size (off_t size)
+{
+ save_totsize = size;
+}
+
+void
+mv_size_left (off_t size)
+{
+ save_sizeleft = size;
+}
+
\f
/* Functions. */
void
-print_total_written (void)
+clear_read_error_count (void)
+{
+ read_error_count = 0;
+}
+
+\f
+/* Time-related functions */
+
+double duration;
+
+void
+set_start_time ()
+{
+ gettime (&start_time);
+ volume_start_time = start_time;
+ last_stat_time = start_time;
+}
+
+static void
+set_volume_start_time (void)
+{
+ gettime (&volume_start_time);
+ last_stat_time = volume_start_time;
+}
+
+void
+compute_duration ()
+{
+ struct timespec now;
+ gettime (&now);
+ duration += ((now.tv_sec - last_stat_time.tv_sec)
+ + (now.tv_nsec - last_stat_time.tv_nsec) / 1e9);
+ gettime (&last_stat_time);
+}
+
+\f
+/* Compression detection */
+
+enum compress_type {
+ ct_tar, /* Plain tar file */
+ ct_none, /* Unknown compression type */
+ ct_compress,
+ ct_gzip,
+ ct_bzip2,
+ ct_lzip,
+ ct_lzma,
+ ct_lzop,
+ ct_xz
+};
+
+struct zip_magic
+{
+ enum compress_type type;
+ size_t length;
+ char const *magic;
+ char const *program;
+ char const *option;
+};
+
+static struct zip_magic const magic[] = {
+ { ct_tar },
+ { ct_none, },
+ { ct_compress, 2, "\037\235", COMPRESS_PROGRAM, "-Z" },
+ { ct_gzip, 2, "\037\213", GZIP_PROGRAM, "-z" },
+ { ct_bzip2, 3, "BZh", BZIP2_PROGRAM, "-j" },
+ { ct_lzip, 4, "LZIP", LZIP_PROGRAM, "--lzip" },
+ { ct_lzma, 6, "\xFFLZMA", LZMA_PROGRAM, "--lzma" },
+ { ct_lzop, 4, "\211LZO", LZOP_PROGRAM, "--lzop" },
+ { ct_xz, 6, "\0xFD7zXZ", XZ_PROGRAM, "-J" },
+};
+
+#define NMAGIC (sizeof(magic)/sizeof(magic[0]))
+
+#define compress_option(t) magic[t].option
+#define compress_program(t) magic[t].program
+
+/* Check if the file ARCHIVE is a compressed archive. */
+static enum compress_type
+check_compressed_archive (bool *pshort)
+{
+ struct zip_magic const *p;
+ bool sfr;
+ bool temp;
+
+ if (!pshort)
+ pshort = &temp;
+
+ /* Prepare global data needed for find_next_block: */
+ record_end = record_start; /* set up for 1st record = # 0 */
+ sfr = read_full_records;
+ read_full_records = true; /* Suppress fatal error on reading a partial
+ record */
+ *pshort = find_next_block () == 0;
+
+ /* Restore global values */
+ read_full_records = sfr;
+
+ if (tar_checksum (record_start, true) == HEADER_SUCCESS)
+ /* Probably a valid header */
+ return ct_tar;
+
+ for (p = magic + 2; p < magic + NMAGIC; p++)
+ if (memcmp (record_start->buffer, p->magic, p->length) == 0)
+ return p->type;
+
+ return ct_none;
+}
+
+/* Guess if the archive is seekable. */
+static void
+guess_seekable_archive (void)
+{
+ struct stat st;
+
+ if (subcommand_option == DELETE_SUBCOMMAND)
+ {
+ /* The current code in delete.c is based on the assumption that
+ skip_member() reads all data from the archive. So, we should
+ make sure it won't use seeks. On the other hand, the same code
+ depends on the ability to backspace a record in the archive,
+ so setting seekable_archive to false is technically incorrect.
+ However, it is tested only in skip_member(), so it's not a
+ problem. */
+ seekable_archive = false;
+ }
+
+ if (seek_option != -1)
+ {
+ seekable_archive = !!seek_option;
+ return;
+ }
+
+ if (!multi_volume_option && !use_compress_program_option
+ && fstat (archive, &st) == 0)
+ seekable_archive = S_ISREG (st.st_mode);
+ else
+ seekable_archive = false;
+}
+
+/* Open an archive named archive_name_array[0]. Detect if it is
+ a compressed archive of known type and use corresponding decompression
+ program if so */
+static int
+open_compressed_archive (void)
+{
+ archive = rmtopen (archive_name_array[0], O_RDONLY | O_BINARY,
+ MODE_RW, rsh_command_option);
+ if (archive == -1)
+ return archive;
+
+ if (!multi_volume_option)
+ {
+ if (!use_compress_program_option)
+ {
+ bool shortfile;
+ enum compress_type type = check_compressed_archive (&shortfile);
+
+ switch (type)
+ {
+ case ct_tar:
+ if (shortfile)
+ ERROR ((0, 0, _("This does not look like a tar archive")));
+ return archive;
+
+ case ct_none:
+ if (shortfile)
+ ERROR ((0, 0, _("This does not look like a tar archive")));
+ set_comression_program_by_suffix (archive_name_array[0], NULL);
+ if (!use_compress_program_option)
+ return archive;
+ break;
+
+ default:
+ use_compress_program_option = compress_program (type);
+ break;
+ }
+ }
+
+ /* FD is not needed any more */
+ rmtclose (archive);
+
+ hit_eof = false; /* It might have been set by find_next_block in
+ check_compressed_archive */
+
+ /* Open compressed archive */
+ child_pid = sys_child_open_for_uncompress ();
+ read_full_records = true;
+ }
+
+ records_read = 0;
+ record_end = record_start; /* set up for 1st record = # 0 */
+
+ return archive;
+}
+\f
+
+static void
+print_stats (FILE *fp, const char *text, tarlong numbytes)
{
- tarlong written = prev_written + bytes_written;
char bytes[sizeof (tarlong) * CHAR_BIT];
char abbr[LONGEST_HUMAN_READABLE + 1];
char rate[LONGEST_HUMAN_READABLE + 1];
- double seconds;
-#if HAVE_CLOCK_GETTIME
- struct timespec now;
- if (clock_gettime (CLOCK_REALTIME, &now) == 0)
- seconds = ((now.tv_sec - start_timespec.tv_sec)
- + (now.tv_nsec - start_timespec.tv_nsec) / 1e9);
- else
-#endif
- seconds = time (0) - start_time;
+ int human_opts = human_autoscale | human_base_1024 | human_SI | human_B;
+
+ sprintf (bytes, TARLONG_FORMAT, numbytes);
+
+ fprintf (fp, "%s: %s (%s, %s/s)\n",
+ text, bytes,
+ human_readable (numbytes, abbr, human_opts, 1, 1),
+ (0 < duration && numbytes / duration < (uintmax_t) -1
+ ? human_readable (numbytes / duration, rate, human_opts, 1, 1)
+ : "?"));
+}
+
+void
+print_total_stats ()
+{
+ switch (subcommand_option)
+ {
+ case CREATE_SUBCOMMAND:
+ case CAT_SUBCOMMAND:
+ case UPDATE_SUBCOMMAND:
+ case APPEND_SUBCOMMAND:
+ /* Amanda 2.4.1p1 looks for "Total bytes written: [0-9][0-9]*". */
+ print_stats (stderr, _("Total bytes written"),
+ prev_written + bytes_written);
+ break;
+
+ case DELETE_SUBCOMMAND:
+ {
+ char buf[UINTMAX_STRSIZE_BOUND];
+ print_stats (stderr, _("Total bytes read"),
+ records_read * record_size);
+ print_stats (stderr, _("Total bytes written"),
+ prev_written + bytes_written);
+ fprintf (stderr, _("Total bytes deleted: %s\n"),
+ STRINGIFY_BIGINT ((records_read - records_skipped)
+ * record_size
+ - (prev_written + bytes_written), buf));
+ }
+ break;
- sprintf (bytes, TARLONG_FORMAT, written);
+ case EXTRACT_SUBCOMMAND:
+ case LIST_SUBCOMMAND:
+ case DIFF_SUBCOMMAND:
+ print_stats (stderr, _("Total bytes read"),
+ records_read * record_size);
+ break;
- /* Amanda 2.4.1p1 looks for "Total bytes written: [0-9][0-9]*". */
- fprintf (stderr, _("Total bytes written: %s (%sB, %sB/s)\n"), bytes,
- human_readable ((uintmax_t) written, abbr, 1, -1024),
- (0 < seconds && written / seconds < (uintmax_t) -1
- ? human_readable ((uintmax_t) (written / seconds), rate, 1, -1024)
- : "?"));
+ default:
+ abort ();
+ }
}
/* Compute and return the block ordinal at current_block. */
{
if (hit_eof)
{
- hit_eof = 0;
+ hit_eof = false;
current_block = record_start;
record_end = record_start + blocking_factor;
access_mode = ACCESS_WRITE;
if (current_block == record_end)
{
if (hit_eof)
- return 0;
+ return 0;
flush_archive ();
if (current_block == record_end)
- {
- hit_eof = 1;
- return 0;
- }
+ {
+ hit_eof = true;
+ return 0;
+ }
}
return current_block;
}
-/* Indicate that we have used all blocks up thru BLOCK.
- FIXME: should the arg have an off-by-1? */
+/* Indicate that we have used all blocks up thru BLOCK. */
void
set_next_block_after (union block *block)
{
/* Return the number of bytes comprising the space between POINTER
through the end of the current buffer of blocks. This space is
available for filling with data, or taking data from. POINTER is
- usually (but not always) the result previous find_next_block call. */
+ usually (but not always) the result of previous find_next_block call. */
size_t
available_space_after (union block *pointer)
{
}
/* Close file having descriptor FD, and abort if close unsuccessful. */
-static void
+void
xclose (int fd)
{
if (close (fd) != 0)
close_error (_("(pipe)"));
}
-/* Duplicate file descriptor FROM into becoming INTO.
- INTO is closed first and has to be the next available slot. */
static void
-xdup2 (int from, int into)
+init_buffer (void)
{
- if (from != into)
- {
- int status = close (into);
+ if (! record_buffer_aligned[record_index])
+ record_buffer_aligned[record_index] =
+ page_aligned_alloc (&record_buffer[record_index], record_size);
- if (status != 0 && errno != EBADF)
- {
- int e = errno;
- FATAL_ERROR ((0, e, _("Cannot close")));
- }
- status = dup (from);
- if (status != into)
- {
- if (status < 0)
- {
- int e = errno;
- FATAL_ERROR ((0, e, _("Cannot dup")));
- }
- abort ();
- }
- xclose (from);
- }
+ record_start = record_buffer_aligned[record_index];
+ current_block = record_start;
+ record_end = record_start + blocking_factor;
}
-#if MSDOS
-
-/* Set ARCHIVE for writing, then compressing an archive. */
+/* Open an archive file. The argument specifies whether we are
+ reading or writing, or both. */
static void
-child_open_for_compress (void)
+_open_archive (enum access_mode wanted_access)
{
- FATAL_ERROR ((0, 0, _("Cannot use compressed or remote archives")));
-}
+ int backed_up_flag = 0;
-/* Set ARCHIVE for uncompressing, then reading an archive. */
-static void
-child_open_for_uncompress (void)
-{
- FATAL_ERROR ((0, 0, _("Cannot use compressed or remote archives")));
-}
+ if (record_size == 0)
+ FATAL_ERROR ((0, 0, _("Invalid value for record_size")));
-#else /* not MSDOS */
+ if (archive_names == 0)
+ FATAL_ERROR ((0, 0, _("No archive name given")));
-/* Return nonzero if NAME is the name of a regular file, or if the file
- does not exist (so it would be created as a regular file). */
-static int
-is_regular_file (const char *name)
-{
- struct stat stbuf;
+ tar_stat_destroy (¤t_stat_info);
+ save_name = 0;
+ real_s_name = 0;
- if (stat (name, &stbuf) == 0)
- return S_ISREG (stbuf.st_mode);
- else
- return errno == ENOENT;
-}
+ record_index = 0;
+ init_buffer ();
-static ssize_t
-write_archive_buffer (void)
-{
- ssize_t status;
- ssize_t written = 0;
+ /* When updating the archive, we start with reading. */
+ access_mode = wanted_access == ACCESS_UPDATE ? ACCESS_READ : wanted_access;
+
+ read_full_records = read_full_records_option;
- while (0 <= (status = rmtwrite (archive, record_start->buffer + written,
- record_size - written)))
+ records_read = 0;
+
+ if (use_compress_program_option)
{
- written += status;
- if (written == record_size
- || _isrmt (archive) || ! S_ISFIFO (archive_stat.st_mode))
- break;
+ switch (wanted_access)
+ {
+ case ACCESS_READ:
+ child_pid = sys_child_open_for_uncompress ();
+ read_full_records = true;
+ record_end = record_start; /* set up for 1st record = # 0 */
+ break;
+
+ case ACCESS_WRITE:
+ child_pid = sys_child_open_for_compress ();
+ break;
+
+ case ACCESS_UPDATE:
+ abort (); /* Should not happen */
+ break;
+ }
+
+ if (!index_file_name
+ && wanted_access == ACCESS_WRITE
+ && strcmp (archive_name_array[0], "-") == 0)
+ stdlis = stderr;
}
+ else if (strcmp (archive_name_array[0], "-") == 0)
+ {
+ read_full_records = true; /* could be a pipe, be safe */
+ if (verify_option)
+ FATAL_ERROR ((0, 0, _("Cannot verify stdin/stdout archive")));
- return written ? written : status;
-}
+ switch (wanted_access)
+ {
+ case ACCESS_READ:
+ {
+ bool shortfile;
+ enum compress_type type;
+
+ archive = STDIN_FILENO;
+
+ type = check_compressed_archive (&shortfile);
+ if (type != ct_tar && type != ct_none)
+ FATAL_ERROR ((0, 0,
+ _("Archive is compressed. Use %s option"),
+ compress_option (type)));
+ if (shortfile)
+ ERROR ((0, 0, _("This does not look like a tar archive")));
+ }
+ break;
+
+ case ACCESS_WRITE:
+ archive = STDOUT_FILENO;
+ if (!index_file_name)
+ stdlis = stderr;
+ break;
+
+ case ACCESS_UPDATE:
+ archive = STDIN_FILENO;
+ write_archive_to_stdout = true;
+ record_end = record_start; /* set up for 1st record = # 0 */
+ if (!index_file_name)
+ stdlis = stderr;
+ break;
+ }
+ }
+ else if (verify_option)
+ archive = rmtopen (archive_name_array[0], O_RDWR | O_CREAT | O_BINARY,
+ MODE_RW, rsh_command_option);
+ else
+ switch (wanted_access)
+ {
+ case ACCESS_READ:
+ archive = open_compressed_archive ();
+ if (archive >= 0)
+ guess_seekable_archive ();
+ break;
-/* Set ARCHIVE for writing, then compressing an archive. */
-static void
-child_open_for_compress (void)
-{
- int parent_pipe[2];
- int child_pipe[2];
- pid_t grandchild_pid;
- int wait_status;
+ case ACCESS_WRITE:
+ if (backup_option)
+ {
+ maybe_backup_file (archive_name_array[0], 1);
+ backed_up_flag = 1;
+ }
+ archive = rmtcreat (archive_name_array[0], MODE_RW,
+ rsh_command_option);
+ break;
- xpipe (parent_pipe);
- child_pid = xfork ();
+ case ACCESS_UPDATE:
+ archive = rmtopen (archive_name_array[0],
+ O_RDWR | O_CREAT | O_BINARY,
+ MODE_RW, rsh_command_option);
+
+ switch (check_compressed_archive (NULL))
+ {
+ case ct_none:
+ case ct_tar:
+ break;
+
+ default:
+ FATAL_ERROR ((0, 0,
+ _("Cannot update compressed archives")));
+ }
+ break;
+ }
- if (child_pid > 0)
+ if (archive < 0
+ || (! _isrmt (archive) && !sys_get_archive_stat ()))
{
- /* The parent tar is still here! Just clean up. */
+ int saved_errno = errno;
- archive = parent_pipe[PWRITE];
- xclose (parent_pipe[PREAD]);
- return;
+ if (backed_up_flag)
+ undo_last_backup ();
+ errno = saved_errno;
+ open_fatal (archive_name_array[0]);
}
- /* The new born child tar is here! */
+ sys_detect_dev_null_output ();
+ sys_save_archive_dev_ino ();
+ SET_BINARY_MODE (archive);
- program_name = _("tar (child)");
+ switch (wanted_access)
+ {
+ case ACCESS_READ:
+ find_next_block (); /* read it in, check for EOF */
+ break;
- xdup2 (parent_pipe[PREAD], STDIN_FILENO);
- xclose (parent_pipe[PWRITE]);
+ case ACCESS_UPDATE:
+ case ACCESS_WRITE:
+ records_written = 0;
+ break;
+ }
+}
- /* Check if we need a grandchild tar. This happens only if either:
- a) we are writing stdout: to force reblocking;
- b) the file is to be accessed by rmt: compressor doesn't know how;
- c) the file is not a plain file. */
+/* Perform a write to flush the buffer. */
+static ssize_t
+_flush_write (void)
+{
+ ssize_t status;
- if (strcmp (archive_name_array[0], "-") != 0
- && !_remdev (archive_name_array[0])
- && is_regular_file (archive_name_array[0]))
+ checkpoint_run (true);
+ if (tape_length_option && tape_length_option <= bytes_written)
{
- if (backup_option)
- maybe_backup_file (archive_name_array[0], 1);
-
- /* We don't need a grandchild tar. Open the archive and launch the
- compressor. */
+ errno = ENOSPC;
+ status = 0;
+ }
+ else if (dev_null_output)
+ status = record_size;
+ else
+ status = sys_write_archive_buffer ();
- archive = creat (archive_name_array[0], MODE_RW);
- if (archive < 0)
- {
- int saved_errno = errno;
+ return status;
+}
- if (backup_option)
- undo_last_backup ();
- errno = saved_errno;
- open_fatal (archive_name_array[0]);
- }
- xdup2 (archive, STDOUT_FILENO);
- execlp (use_compress_program_option, use_compress_program_option,
- (char *) 0);
- exec_fatal (use_compress_program_option);
+/* Handle write errors on the archive. Write errors are always fatal.
+ Hitting the end of a volume does not cause a write error unless the
+ write was the first record of the volume. */
+void
+archive_write_error (ssize_t status)
+{
+ /* It might be useful to know how much was written before the error
+ occurred. */
+ if (totals_option)
+ {
+ int e = errno;
+ print_total_stats ();
+ errno = e;
}
- /* We do need a grandchild tar. */
+ write_fatal_details (*archive_name_cursor, status, record_size);
+}
+
+/* Handle read errors on the archive. If the read should be retried,
+ return to the caller. */
+void
+archive_read_error (void)
+{
+ read_error (*archive_name_cursor);
+
+ if (record_start_block == 0)
+ FATAL_ERROR ((0, 0, _("At beginning of tape, quitting now")));
- xpipe (child_pipe);
- grandchild_pid = xfork ();
+ /* Read error in mid archive. We retry up to READ_ERROR_MAX times and
+ then give up on reading the archive. */
- if (grandchild_pid == 0)
- {
- /* The newborn grandchild tar is here! Launch the compressor. */
+ if (read_error_count++ > READ_ERROR_MAX)
+ FATAL_ERROR ((0, 0, _("Too many errors, quitting")));
+ return;
+}
- program_name = _("tar (grandchild)");
+static bool
+archive_is_dev (void)
+{
+ struct stat st;
- xdup2 (child_pipe[PWRITE], STDOUT_FILENO);
- xclose (child_pipe[PREAD]);
- execlp (use_compress_program_option, use_compress_program_option,
- (char *) 0);
- exec_fatal (use_compress_program_option);
+ if (fstat (archive, &st))
+ {
+ stat_diag (*archive_name_cursor);
+ return false;
}
+ return S_ISBLK (st.st_mode) || S_ISCHR (st.st_mode);
+}
- /* The child tar is still here! */
-
- /* Prepare for reblocking the data from the compressor into the archive. */
+static void
+short_read (size_t status)
+{
+ size_t left; /* bytes left */
+ char *more; /* pointer to next byte to read */
- xdup2 (child_pipe[PREAD], STDIN_FILENO);
- xclose (child_pipe[PWRITE]);
+ more = record_start->buffer + status;
+ left = record_size - status;
- if (strcmp (archive_name_array[0], "-") == 0)
- archive = STDOUT_FILENO;
- else
+ if (left && left % BLOCKSIZE == 0
+ && verbose_option
+ && record_start_block == 0 && status != 0
+ && archive_is_dev ())
{
- archive = rmtcreat (archive_name_array[0], MODE_RW, rsh_command_option);
- if (archive < 0)
- open_fatal (archive_name_array[0]);
+ unsigned long rsize = status / BLOCKSIZE;
+ WARN ((0, 0,
+ ngettext ("Record size = %lu block",
+ "Record size = %lu blocks",
+ rsize),
+ rsize));
}
- /* Let's read out of the stdin pipe and write an archive. */
-
- while (1)
+ while (left % BLOCKSIZE != 0
+ || (left && status && read_full_records))
{
- ssize_t status = 0;
- char *cursor;
- size_t length;
+ if (status)
+ while ((status = rmtread (archive, more, left)) == SAFE_READ_ERROR)
+ archive_read_error ();
- /* Assemble a record. */
+ if (status == 0)
+ break;
- for (length = 0, cursor = record_start->buffer;
- length < record_size;
- length += status, cursor += status)
- {
- size_t size = record_size - length;
+ if (! read_full_records)
+ {
+ unsigned long rest = record_size - left;
- if (size < BLOCKSIZE)
- size = BLOCKSIZE;
- status = safe_read (STDIN_FILENO, cursor, size);
- if (status <= 0)
- break;
- }
+ FATAL_ERROR ((0, 0,
+ ngettext ("Unaligned block (%lu byte) in archive",
+ "Unaligned block (%lu bytes) in archive",
+ rest),
+ rest));
+ }
- if (status < 0)
- read_fatal (use_compress_program_option);
+ left -= status;
+ more += status;
+ }
- /* Copy the record. */
+ record_end = record_start + (record_size - left) / BLOCKSIZE;
+ records_read++;
+}
- if (status == 0)
- {
- /* We hit the end of the file. Write last record at
- full length, as the only role of the grandchild is
- doing proper reblocking. */
-
- if (length > 0)
- {
- memset (record_start->buffer + length, 0, record_size - length);
- status = write_archive_buffer ();
- if (status != record_size)
- archive_write_error (status);
- }
-
- /* There is nothing else to read, break out. */
- break;
- }
+/* Flush the current buffer to/from the archive. */
+void
+flush_archive (void)
+{
+ size_t buffer_level = current_block->buffer - record_start->buffer;
+ record_start_block += record_end - record_start;
+ current_block = record_start;
+ record_end = record_start + blocking_factor;
- status = write_archive_buffer ();
- if (status != record_size)
- archive_write_error (status);
+ if (access_mode == ACCESS_READ && time_to_start_writing)
+ {
+ access_mode = ACCESS_WRITE;
+ time_to_start_writing = false;
+ backspace_output ();
}
-#if 0
- close_archive ();
-#endif
-
- /* Propagate any failure of the grandchild back to the parent. */
+ switch (access_mode)
+ {
+ case ACCESS_READ:
+ flush_read ();
+ break;
- while (waitpid (grandchild_pid, &wait_status, 0) == -1)
- if (errno != EINTR)
- {
- waitpid_error (use_compress_program_option);
- break;
- }
+ case ACCESS_WRITE:
+ flush_write_ptr (buffer_level);
+ break;
- if (WIFSIGNALED (wait_status))
- {
- kill (child_pid, WTERMSIG (wait_status));
- exit_status = TAREXIT_FAILURE;
+ case ACCESS_UPDATE:
+ abort ();
}
- else if (WEXITSTATUS (wait_status) != 0)
- exit_status = WEXITSTATUS (wait_status);
-
- exit (exit_status);
}
-/* Set ARCHIVE for uncompressing, then reading an archive. */
+/* Backspace the archive descriptor by one record worth. If it's a
+ tape, MTIOCTOP will work. If it's something else, try to seek on
+ it. If we can't seek, we lose! */
static void
-child_open_for_uncompress (void)
+backspace_output (void)
{
- int parent_pipe[2];
- int child_pipe[2];
- pid_t grandchild_pid;
- int wait_status;
-
- xpipe (parent_pipe);
- child_pid = xfork ();
-
- if (child_pid > 0)
- {
- /* The parent tar is still here! Just clean up. */
+#ifdef MTIOCTOP
+ {
+ struct mtop operation;
- read_full_records_option = 1;
- archive = parent_pipe[PREAD];
- xclose (parent_pipe[PWRITE]);
+ operation.mt_op = MTBSR;
+ operation.mt_count = 1;
+ if (rmtioctl (archive, MTIOCTOP, (char *) &operation) >= 0)
return;
- }
-
- /* The newborn child tar is here! */
-
- program_name = _("tar (child)");
+ if (errno == EIO && rmtioctl (archive, MTIOCTOP, (char *) &operation) >= 0)
+ return;
+ }
+#endif
- xdup2 (parent_pipe[PWRITE], STDOUT_FILENO);
- xclose (parent_pipe[PREAD]);
+ {
+ off_t position = rmtlseek (archive, (off_t) 0, SEEK_CUR);
- /* Check if we need a grandchild tar. This happens only if either:
- a) we're reading stdin: to force unblocking;
- b) the file is to be accessed by rmt: compressor doesn't know how;
- c) the file is not a plain file. */
+ /* Seek back to the beginning of this record and start writing there. */
- if (strcmp (archive_name_array[0], "-") != 0
- && !_remdev (archive_name_array[0])
- && is_regular_file (archive_name_array[0]))
- {
- /* We don't need a grandchild tar. Open the archive and lauch the
- uncompressor. */
-
- archive = open (archive_name_array[0], O_RDONLY | O_BINARY, MODE_RW);
- if (archive < 0)
- open_fatal (archive_name_array[0]);
- xdup2 (archive, STDIN_FILENO);
- execlp (use_compress_program_option, use_compress_program_option,
- "-d", (char *) 0);
- exec_fatal (use_compress_program_option);
- }
+ position -= record_size;
+ if (position < 0)
+ position = 0;
+ if (rmtlseek (archive, position, SEEK_SET) != position)
+ {
+ /* Lseek failed. Try a different method. */
- /* We do need a grandchild tar. */
+ WARN ((0, 0,
+ _("Cannot backspace archive file; it may be unreadable without -i")));
- xpipe (child_pipe);
- grandchild_pid = xfork ();
+ /* Replace the first part of the record with NULs. */
- if (grandchild_pid == 0)
- {
- /* The newborn grandchild tar is here! Launch the uncompressor. */
+ if (record_start->buffer != output_start)
+ memset (record_start->buffer, 0,
+ output_start - record_start->buffer);
+ }
+ }
+}
- program_name = _("tar (grandchild)");
+off_t
+seek_archive (off_t size)
+{
+ off_t start = current_block_ordinal ();
+ off_t offset;
+ off_t nrec, nblk;
+ off_t skipped = (blocking_factor - (current_block - record_start))
+ * BLOCKSIZE;
- xdup2 (child_pipe[PREAD], STDIN_FILENO);
- xclose (child_pipe[PWRITE]);
- execlp (use_compress_program_option, use_compress_program_option,
- "-d", (char *) 0);
- exec_fatal (use_compress_program_option);
- }
+ if (size <= skipped)
+ return 0;
- /* The child tar is still here! */
+ /* Compute number of records to skip */
+ nrec = (size - skipped) / record_size;
+ if (nrec == 0)
+ return 0;
+ offset = rmtlseek (archive, nrec * record_size, SEEK_CUR);
+ if (offset < 0)
+ return offset;
- /* Prepare for unblocking the data from the archive into the
- uncompressor. */
+ if (offset % record_size)
+ FATAL_ERROR ((0, 0, _("rmtlseek not stopped at a record boundary")));
- xdup2 (child_pipe[PWRITE], STDOUT_FILENO);
- xclose (child_pipe[PREAD]);
+ /* Convert to number of records */
+ offset /= BLOCKSIZE;
+ /* Compute number of skipped blocks */
+ nblk = offset - start;
- if (strcmp (archive_name_array[0], "-") == 0)
- archive = STDIN_FILENO;
- else
- archive = rmtopen (archive_name_array[0], O_RDONLY | O_BINARY,
- MODE_RW, rsh_command_option);
- if (archive < 0)
- open_fatal (archive_name_array[0]);
+ /* Update buffering info */
+ records_read += nblk / blocking_factor;
+ record_start_block = offset - blocking_factor;
+ current_block = record_end;
- /* Let's read the archive and pipe it into stdout. */
+ return nblk;
+}
- while (1)
+/* Close the archive file. */
+void
+close_archive (void)
+{
+ if (time_to_start_writing || access_mode == ACCESS_WRITE)
{
- char *cursor;
- size_t maximum;
- size_t count;
- ssize_t status;
-
- read_error_count = 0;
-
- error_loop:
- status = rmtread (archive, record_start->buffer, record_size);
- if (status < 0)
- {
- archive_read_error ();
- goto error_loop;
- }
- if (status == 0)
- break;
- cursor = record_start->buffer;
- maximum = status;
- while (maximum)
- {
- count = maximum < BLOCKSIZE ? maximum : BLOCKSIZE;
- status = full_write (STDOUT_FILENO, cursor, count);
- if (status < 0)
- write_error (use_compress_program_option);
+ flush_archive ();
+ if (current_block > record_start)
+ flush_archive ();
+ }
- if (status != count)
- {
- ERROR ((0, 0, _("Write to compression program short %lu bytes"),
- (unsigned long) (count - status)));
- count = status;
- }
+ compute_duration ();
+ if (verify_option)
+ verify_volume ();
- cursor += count;
- maximum -= count;
- }
- }
+ if (rmtclose (archive) != 0)
+ close_error (*archive_name_cursor);
- xclose (STDOUT_FILENO);
-#if 0
- close_archive ();
-#endif
+ sys_wait_for_child (child_pid, hit_eof);
- /* Propagate any failure of the grandchild back to the parent. */
+ tar_stat_destroy (¤t_stat_info);
+ if (save_name)
+ free (save_name);
+ if (real_s_name)
+ free (real_s_name);
+ free (record_buffer[0]);
+ free (record_buffer[1]);
+}
- while (waitpid (grandchild_pid, &wait_status, 0) == -1)
- if (errno != EINTR)
- {
- waitpid_error (use_compress_program_option);
- break;
- }
+/* Called to initialize the global volume number. */
+void
+init_volume_number (void)
+{
+ FILE *file = fopen (volno_file_option, "r");
- if (WIFSIGNALED (wait_status))
+ if (file)
{
- kill (child_pid, WTERMSIG (wait_status));
- exit_status = TAREXIT_FAILURE;
+ if (fscanf (file, "%d", &global_volno) != 1
+ || global_volno < 0)
+ FATAL_ERROR ((0, 0, _("%s: contains invalid volume number"),
+ quotearg_colon (volno_file_option)));
+ if (ferror (file))
+ read_error (volno_file_option);
+ if (fclose (file) != 0)
+ close_error (volno_file_option);
}
- else if (WEXITSTATUS (wait_status) != 0)
- exit_status = WEXITSTATUS (wait_status);
-
- exit (exit_status);
+ else if (errno != ENOENT)
+ open_error (volno_file_option);
}
-#endif /* not MSDOS */
-
-/* Check the LABEL block against the volume label, seen as a globbing
- pattern. Return true if the pattern matches. In case of failure,
- retry matching a volume sequence number before giving up in
- multi-volume mode. */
-static int
-check_label_pattern (union block *label)
+/* Called to write out the closing global volume number. */
+void
+closeout_volume_number (void)
{
- char *string;
- int result;
+ FILE *file = fopen (volno_file_option, "w");
- if (! memchr (label->header.name, '\0', sizeof label->header.name))
- return 0;
+ if (file)
+ {
+ fprintf (file, "%d\n", global_volno);
+ if (ferror (file))
+ write_error (volno_file_option);
+ if (fclose (file) != 0)
+ close_error (volno_file_option);
+ }
+ else
+ open_error (volno_file_option);
+}
- if (fnmatch (volume_label_option, label->header.name, 0) == 0)
- return 1;
+\f
+static void
+increase_volume_number (void)
+{
+ global_volno++;
+ if (global_volno < 0)
+ FATAL_ERROR ((0, 0, _("Volume number overflow")));
+ volno++;
+}
- if (!multi_volume_option)
- return 0;
+static void
+change_tape_menu (FILE *read_file)
+{
+ char *input_buffer = NULL;
+ size_t size = 0;
+ bool stop = false;
- string = xmalloc (strlen (volume_label_option)
- + sizeof VOLUME_LABEL_APPEND + 1);
- strcpy (string, volume_label_option);
- strcat (string, VOLUME_LABEL_APPEND);
- result = fnmatch (string, label->header.name, 0) == 0;
- free (string);
- return result;
+ while (!stop)
+ {
+ fputc ('\007', stderr);
+ fprintf (stderr,
+ _("Prepare volume #%d for %s and hit return: "),
+ global_volno + 1, quote (*archive_name_cursor));
+ fflush (stderr);
+
+ if (getline (&input_buffer, &size, read_file) <= 0)
+ {
+ WARN ((0, 0, _("EOF where user reply was expected")));
+
+ if (subcommand_option != EXTRACT_SUBCOMMAND
+ && subcommand_option != LIST_SUBCOMMAND
+ && subcommand_option != DIFF_SUBCOMMAND)
+ WARN ((0, 0, _("WARNING: Archive is incomplete")));
+
+ fatal_exit ();
+ }
+
+ if (input_buffer[0] == '\n'
+ || input_buffer[0] == 'y'
+ || input_buffer[0] == 'Y')
+ break;
+
+ switch (input_buffer[0])
+ {
+ case '?':
+ {
+ fprintf (stderr, _("\
+ n name Give a new file name for the next (and subsequent) volume(s)\n\
+ q Abort tar\n\
+ y or newline Continue operation\n"));
+ if (!restrict_option)
+ fprintf (stderr, _(" ! Spawn a subshell\n"));
+ fprintf (stderr, _(" ? Print this list\n"));
+ }
+ break;
+
+ case 'q':
+ /* Quit. */
+
+ WARN ((0, 0, _("No new volume; exiting.\n")));
+
+ if (subcommand_option != EXTRACT_SUBCOMMAND
+ && subcommand_option != LIST_SUBCOMMAND
+ && subcommand_option != DIFF_SUBCOMMAND)
+ WARN ((0, 0, _("WARNING: Archive is incomplete")));
+
+ fatal_exit ();
+
+ case 'n':
+ /* Get new file name. */
+
+ {
+ char *name;
+ char *cursor;
+
+ for (name = input_buffer + 1;
+ *name == ' ' || *name == '\t';
+ name++)
+ ;
+
+ for (cursor = name; *cursor && *cursor != '\n'; cursor++)
+ ;
+ *cursor = '\0';
+
+ if (name[0])
+ {
+ /* FIXME: the following allocation is never reclaimed. */
+ *archive_name_cursor = xstrdup (name);
+ stop = true;
+ }
+ else
+ fprintf (stderr, "%s",
+ _("File name not specified. Try again.\n"));
+ }
+ break;
+
+ case '!':
+ if (!restrict_option)
+ {
+ sys_spawn_shell ();
+ break;
+ }
+ /* FALL THROUGH */
+
+ default:
+ fprintf (stderr, _("Invalid input. Type ? for help.\n"));
+ }
+ }
+ free (input_buffer);
}
-/* Open an archive file. The argument specifies whether we are
- reading or writing, or both. */
-void
-open_archive (enum access_mode wanted_access)
+/* We've hit the end of the old volume. Close it and open the next one.
+ Return nonzero on success.
+*/
+static bool
+new_volume (enum access_mode mode)
{
- int backed_up_flag = 0;
+ static FILE *read_file;
+ static int looped;
+ int prompt;
- stdlis = to_stdout_option ? stderr : stdout;
+ if (!read_file && !info_script_option)
+ /* FIXME: if fopen is used, it will never be closed. */
+ read_file = archive == STDIN_FILENO ? fopen (TTY_NAME, "r") : stdin;
- if (record_size == 0)
- FATAL_ERROR ((0, 0, _("Invalid value for record_size")));
+ if (now_verifying)
+ return false;
+ if (verify_option)
+ verify_volume ();
- if (archive_names == 0)
- FATAL_ERROR ((0, 0, _("No archive name given")));
+ assign_string (&volume_label, NULL);
+ assign_string (&continued_file_name, NULL);
+ continued_file_size = continued_file_offset = 0;
+ current_block = record_start;
- current_file_name = 0;
- current_link_name = 0;
- save_name = 0;
- real_s_name = 0;
+ if (rmtclose (archive) != 0)
+ close_error (*archive_name_cursor);
- if (multi_volume_option)
+ archive_name_cursor++;
+ if (archive_name_cursor == archive_name_array + archive_names)
{
- if (verify_option)
- FATAL_ERROR ((0, 0, _("Cannot verify multi-volume archives")));
- record_start = valloc (record_size + (2 * BLOCKSIZE));
- if (record_start)
- record_start += 2;
+ archive_name_cursor = archive_name_array;
+ looped = 1;
}
- else
- record_start = valloc (record_size);
- if (!record_start)
- FATAL_ERROR ((0, 0, _("Cannot allocate memory for blocking factor %d"),
- blocking_factor));
-
- current_block = record_start;
- record_end = record_start + blocking_factor;
- /* When updating the archive, we start with reading. */
- access_mode = wanted_access == ACCESS_UPDATE ? ACCESS_READ : wanted_access;
+ prompt = looped;
- if (use_compress_program_option)
+ tryagain:
+ if (prompt)
{
- if (multi_volume_option)
- FATAL_ERROR ((0, 0, _("Cannot use multi-volume compressed archives")));
- if (verify_option)
- FATAL_ERROR ((0, 0, _("Cannot verify compressed archives")));
-
- switch (wanted_access)
- {
- case ACCESS_READ:
- child_open_for_uncompress ();
- break;
-
- case ACCESS_WRITE:
- child_open_for_compress ();
- break;
-
- case ACCESS_UPDATE:
- FATAL_ERROR ((0, 0, _("Cannot update compressed archives")));
- break;
- }
+ /* We have to prompt from now on. */
- if (wanted_access == ACCESS_WRITE
- && strcmp (archive_name_array[0], "-") == 0)
- stdlis = stderr;
+ if (info_script_option)
+ {
+ if (volno_file_option)
+ closeout_volume_number ();
+ if (sys_exec_info_script (archive_name_cursor, global_volno+1))
+ FATAL_ERROR ((0, 0, _("%s command failed"),
+ quote (info_script_option)));
+ }
+ else
+ change_tape_menu (read_file);
}
- else if (strcmp (archive_name_array[0], "-") == 0)
- {
- read_full_records_option = 1; /* could be a pipe, be safe */
- if (verify_option)
- FATAL_ERROR ((0, 0, _("Cannot verify stdin/stdout archive")));
- switch (wanted_access)
- {
- case ACCESS_READ:
- archive = STDIN_FILENO;
- break;
-
- case ACCESS_WRITE:
- archive = STDOUT_FILENO;
- stdlis = stderr;
- break;
-
- case ACCESS_UPDATE:
- archive = STDIN_FILENO;
- stdlis = stderr;
- write_archive_to_stdout = 1;
- break;
- }
+ if (strcmp (archive_name_cursor[0], "-") == 0)
+ {
+ read_full_records = true;
+ archive = STDIN_FILENO;
}
else if (verify_option)
- archive = rmtopen (archive_name_array[0], O_RDWR | O_CREAT | O_BINARY,
- MODE_RW, rsh_command_option);
+ archive = rmtopen (*archive_name_cursor, O_RDWR | O_CREAT, MODE_RW,
+ rsh_command_option);
else
- switch (wanted_access)
+ switch (mode)
{
case ACCESS_READ:
- archive = rmtopen (archive_name_array[0], O_RDONLY | O_BINARY,
- MODE_RW, rsh_command_option);
- break;
+ archive = rmtopen (*archive_name_cursor, O_RDONLY, MODE_RW,
+ rsh_command_option);
+ guess_seekable_archive ();
+ break;
case ACCESS_WRITE:
- if (backup_option)
- {
- maybe_backup_file (archive_name_array[0], 1);
- backed_up_flag = 1;
- }
- archive = rmtcreat (archive_name_array[0], MODE_RW,
- rsh_command_option);
- break;
+ if (backup_option)
+ maybe_backup_file (*archive_name_cursor, 1);
+ archive = rmtcreat (*archive_name_cursor, MODE_RW,
+ rsh_command_option);
+ break;
case ACCESS_UPDATE:
- archive = rmtopen (archive_name_array[0], O_RDWR | O_CREAT | O_BINARY,
- MODE_RW, rsh_command_option);
- break;
+ archive = rmtopen (*archive_name_cursor, O_RDWR | O_CREAT, MODE_RW,
+ rsh_command_option);
+ break;
}
- if (archive < 0
- || (! _isrmt (archive) && fstat (archive, &archive_stat) < 0))
+ if (archive < 0)
{
- int saved_errno = errno;
-
- if (backed_up_flag)
- undo_last_backup ();
- errno = saved_errno;
- open_fatal (archive_name_array[0]);
+ open_warn (*archive_name_cursor);
+ if (!verify_option && mode == ACCESS_WRITE && backup_option)
+ undo_last_backup ();
+ prompt = 1;
+ goto tryagain;
}
-#if !MSDOS
+ SET_BINARY_MODE (archive);
- /* Detect if outputting to "/dev/null". */
- {
- static char const dev_null[] = "/dev/null";
- struct stat dev_null_stat;
-
- dev_null_output =
- (strcmp (archive_name_array[0], dev_null) == 0
- || (! _isrmt (archive)
- && S_ISCHR (archive_stat.st_mode)
- && stat (dev_null, &dev_null_stat) == 0
- && archive_stat.st_dev == dev_null_stat.st_dev
- && archive_stat.st_ino == dev_null_stat.st_ino));
- }
+ return true;
+}
+
+static bool
+read_header0 (struct tar_stat_info *info)
+{
+ enum read_header rc;
- if (!_isrmt (archive) && S_ISREG (archive_stat.st_mode))
+ tar_stat_init (info);
+ rc = read_header (¤t_header, info, read_header_auto);
+ if (rc == HEADER_SUCCESS)
{
- ar_dev = archive_stat.st_dev;
- ar_ino = archive_stat.st_ino;
+ set_next_block_after (current_header);
+ return true;
}
- else
- ar_dev = 0;
-
-#endif /* not MSDOS */
+ ERROR ((0, 0, _("This does not look like a tar archive")));
+ return false;
+}
-#if MSDOS
- setmode (archive, O_BINARY);
-#endif
+static bool
+try_new_volume (void)
+{
+ size_t status;
+ union block *header;
+ enum access_mode acc;
- switch (wanted_access)
+ switch (subcommand_option)
{
- case ACCESS_READ:
- case ACCESS_UPDATE:
- record_end = record_start; /* set up for 1st record = # 0 */
- find_next_block (); /* read it in, check for EOF */
-
- if (volume_label_option)
- {
- union block *label = find_next_block ();
-
- if (!label)
- FATAL_ERROR ((0, 0, _("Archive not labeled to match %s"),
- quote (volume_label_option)));
- if (!check_label_pattern (label))
- FATAL_ERROR ((0, 0, _("Volume %s does not match %s"),
- quote_n (0, label->header.name),
- quote_n (1, volume_label_option)));
- }
+ case APPEND_SUBCOMMAND:
+ case CAT_SUBCOMMAND:
+ case UPDATE_SUBCOMMAND:
+ acc = ACCESS_UPDATE;
break;
- case ACCESS_WRITE:
- if (volume_label_option)
- {
- memset (record_start, 0, BLOCKSIZE);
- if (multi_volume_option)
- sprintf (record_start->header.name, "%s Volume 1",
- volume_label_option);
- else
- strcpy (record_start->header.name, volume_label_option);
-
- assign_string (¤t_file_name, record_start->header.name);
-
- record_start->header.typeflag = GNUTYPE_VOLHDR;
- TIME_TO_CHARS (start_time, record_start->header.mtime);
- finish_header (record_start);
-#if 0
- current_block++;
-#endif
- }
+ default:
+ acc = ACCESS_READ;
break;
}
-}
-/* Perform a write to flush the buffer. */
-void
-flush_write (void)
-{
- int copy_back;
- ssize_t status;
+ if (!new_volume (acc))
+ return true;
- if (checkpoint_option && !(++checkpoint % 10))
- WARN ((0, 0, _("Write checkpoint %d"), checkpoint));
+ while ((status = rmtread (archive, record_start->buffer, record_size))
+ == SAFE_READ_ERROR)
+ archive_read_error ();
- if (tape_length_option && tape_length_option <= bytes_written)
+ if (status != record_size)
+ short_read (status);
+
+ header = find_next_block ();
+ if (!header)
+ return false;
+
+ switch (header->header.typeflag)
{
- errno = ENOSPC;
- status = 0;
- }
- else if (dev_null_output)
- status = record_size;
- else
- status = write_archive_buffer ();
- if (status != record_size && !multi_volume_option)
- archive_write_error (status);
-
- if (status > 0)
- bytes_written += status;
-
- if (status == record_size)
- {
- if (multi_volume_option)
- {
- char *cursor;
-
- if (!save_name)
- {
- assign_string (&real_s_name, 0);
- real_s_totsize = 0;
- real_s_sizeleft = 0;
- return;
- }
+ case XGLTYPE:
+ {
+ tar_stat_init (&dummy);
+ if (read_header (&header, &dummy, read_header_x_global)
+ != HEADER_SUCCESS_EXTENDED)
+ {
+ ERROR ((0, 0, _("This does not look like a tar archive")));
+ return false;
+ }
- cursor = save_name + FILESYSTEM_PREFIX_LEN (save_name);
- while (*cursor == '/')
- cursor++;
+ xheader_decode (&dummy); /* decodes values from the global header */
+ tar_stat_destroy (&dummy);
- assign_string (&real_s_name, cursor);
- real_s_totsize = save_totsize;
- real_s_sizeleft = save_sizeleft;
- }
- return;
- }
+ /* The initial global header must be immediately followed by
+ an extended PAX header for the first member in this volume.
+ However, in some cases tar may split volumes in the middle
+ of a PAX header. This is incorrect, and should be fixed
+ in the future versions. In the meantime we must be
+ prepared to correctly list and extract such archives.
- /* We're multivol. Panic if we didn't get the right kind of response. */
+ If this happens, the following call to read_header returns
+ HEADER_FAILURE, which is ignored.
- /* ENXIO is for the UNIX PC. */
- if (status < 0 && errno != ENOSPC && errno != EIO && errno != ENXIO)
- archive_write_error (status);
+ See also tests/multiv07.at */
- /* If error indicates a short write, we just move to the next tape. */
+ switch (read_header (&header, &dummy, read_header_auto))
+ {
+ case HEADER_SUCCESS:
+ set_next_block_after (header);
+ break;
- if (!new_volume (ACCESS_WRITE))
- return;
+ case HEADER_FAILURE:
+ break;
- if (totals_option)
- prev_written += bytes_written;
- bytes_written = 0;
+ default:
+ ERROR ((0, 0, _("This does not look like a tar archive")));
+ return false;
+ }
+ break;
+ }
- if (volume_label_option && real_s_name)
- {
- copy_back = 2;
- record_start -= 2;
- }
- else if (volume_label_option || real_s_name)
- {
- copy_back = 1;
- record_start--;
- }
- else
- copy_back = 0;
+ case GNUTYPE_VOLHDR:
+ if (!read_header0 (&dummy))
+ return false;
+ tar_stat_destroy (&dummy);
+ assign_string (&volume_label, current_header->header.name);
+ set_next_block_after (header);
+ header = find_next_block ();
+ if (header->header.typeflag != GNUTYPE_MULTIVOL)
+ break;
+ /* FALL THROUGH */
+
+ case GNUTYPE_MULTIVOL:
+ if (!read_header0 (&dummy))
+ return false;
+ tar_stat_destroy (&dummy);
+ assign_string (&continued_file_name, current_header->header.name);
+ continued_file_size =
+ UINTMAX_FROM_HEADER (current_header->header.size);
+ continued_file_offset =
+ UINTMAX_FROM_HEADER (current_header->oldgnu_header.offset);
+ break;
- if (volume_label_option)
- {
- memset (record_start, 0, BLOCKSIZE);
- sprintf (record_start->header.name, "%s Volume %d",
- volume_label_option, volno);
- TIME_TO_CHARS (start_time, record_start->header.mtime);
- record_start->header.typeflag = GNUTYPE_VOLHDR;
- finish_header (record_start);
+ default:
+ break;
}
if (real_s_name)
{
- int tmp;
-
- if (volume_label_option)
- record_start++;
-
- memset (record_start, 0, BLOCKSIZE);
-
- /* FIXME: Michael P Urban writes: [a long name file] is being written
- when a new volume rolls around [...] Looks like the wrong value is
- being preserved in real_s_name, though. */
+ uintmax_t s;
+ if (!continued_file_name
+ || strcmp (continued_file_name, real_s_name))
+ {
+ if ((archive_format == GNU_FORMAT || archive_format == OLDGNU_FORMAT)
+ && strlen (real_s_name) >= NAME_FIELD_SIZE
+ && strncmp (continued_file_name, real_s_name,
+ NAME_FIELD_SIZE) == 0)
+ WARN ((0, 0,
+ _("%s is possibly continued on this volume: header contains truncated name"),
+ quote (real_s_name)));
+ else
+ {
+ WARN ((0, 0, _("%s is not continued on this volume"),
+ quote (real_s_name)));
+ return false;
+ }
+ }
+
+ s = continued_file_size + continued_file_offset;
+
+ if (real_s_totsize != s || s < continued_file_offset)
+ {
+ char totsizebuf[UINTMAX_STRSIZE_BOUND];
+ char s1buf[UINTMAX_STRSIZE_BOUND];
+ char s2buf[UINTMAX_STRSIZE_BOUND];
+
+ WARN ((0, 0, _("%s is the wrong size (%s != %s + %s)"),
+ quote (continued_file_name),
+ STRINGIFY_BIGINT (save_totsize, totsizebuf),
+ STRINGIFY_BIGINT (continued_file_size, s1buf),
+ STRINGIFY_BIGINT (continued_file_offset, s2buf)));
+ return false;
+ }
+
+ if (real_s_totsize - real_s_sizeleft != continued_file_offset)
+ {
+ char totsizebuf[UINTMAX_STRSIZE_BOUND];
+ char s1buf[UINTMAX_STRSIZE_BOUND];
+ char s2buf[UINTMAX_STRSIZE_BOUND];
+
+ WARN ((0, 0, _("This volume is out of sequence (%s - %s != %s)"),
+ STRINGIFY_BIGINT (real_s_totsize, totsizebuf),
+ STRINGIFY_BIGINT (real_s_sizeleft, s1buf),
+ STRINGIFY_BIGINT (continued_file_offset, s2buf)));
+
+ return false;
+ }
+ }
- strcpy (record_start->header.name, real_s_name);
- record_start->header.typeflag = GNUTYPE_MULTIVOL;
- OFF_TO_CHARS (real_s_sizeleft, record_start->header.size);
- OFF_TO_CHARS (real_s_totsize - real_s_sizeleft,
- record_start->oldgnu_header.offset);
- tmp = verbose_option;
- verbose_option = 0;
- finish_header (record_start);
- verbose_option = tmp;
+ increase_volume_number ();
+ return true;
+}
- if (volume_label_option)
- record_start--;
- }
+\f
+#define VOLUME_TEXT " Volume "
+#define VOLUME_TEXT_LEN (sizeof VOLUME_TEXT - 1)
- status = write_archive_buffer ();
- if (status != record_size)
- archive_write_error (status);
+char *
+drop_volume_label_suffix (const char *label)
+{
+ const char *p;
+ size_t len = strlen (label);
- bytes_written += status;
+ if (len < 1)
+ return NULL;
- if (copy_back)
+ for (p = label + len - 1; p > label && isdigit ((unsigned char) *p); p--)
+ ;
+ if (p > label && p - (VOLUME_TEXT_LEN - 1) > label)
{
- record_start += copy_back;
- memcpy (current_block,
- record_start + blocking_factor - copy_back,
- copy_back * BLOCKSIZE);
- current_block += copy_back;
-
- if (real_s_sizeleft >= copy_back * BLOCKSIZE)
- real_s_sizeleft -= copy_back * BLOCKSIZE;
- else if ((real_s_sizeleft + BLOCKSIZE - 1) / BLOCKSIZE <= copy_back)
- assign_string (&real_s_name, 0);
- else
+ p -= VOLUME_TEXT_LEN - 1;
+ if (memcmp (p, VOLUME_TEXT, VOLUME_TEXT_LEN) == 0)
{
- char *cursor = save_name + FILESYSTEM_PREFIX_LEN (save_name);
-
- while (*cursor == '/')
- cursor++;
-
- assign_string (&real_s_name, cursor);
- real_s_sizeleft = save_sizeleft;
- real_s_totsize = save_totsize;
+ char *s = xmalloc ((len = p - label) + 1);
+ memcpy (s, label, len);
+ s[len] = 0;
+ return s;
}
- copy_back = 0;
}
-}
-/* Handle write errors on the archive. Write errors are always fatal.
- Hitting the end of a volume does not cause a write error unless the
- write was the first record of the volume. */
-static void
-archive_write_error (ssize_t status)
-{
- /* It might be useful to know how much was written before the error
- occurred. */
- if (totals_option)
- {
- int e = errno;
- print_total_written ();
- errno = e;
- }
-
- write_fatal_details (*archive_name_cursor, status, record_size);
+ return NULL;
}
-/* Handle read errors on the archive. If the read should be retried,
- return to the caller. */
-static void
-archive_read_error (void)
+/* Check LABEL against the volume label, seen as a globbing
+ pattern. Return true if the pattern matches. In case of failure,
+ retry matching a volume sequence number before giving up in
+ multi-volume mode. */
+static bool
+check_label_pattern (const char *label)
{
- read_error (*archive_name_cursor);
+ char *string;
+ bool result = false;
- if (record_start_block == 0)
- FATAL_ERROR ((0, 0, _("At beginning of tape, quitting now")));
+ if (fnmatch (volume_label_option, label, 0) == 0)
+ return true;
- /* Read error in mid archive. We retry up to READ_ERROR_MAX times and
- then give up on reading the archive. */
+ if (!multi_volume_option)
+ return false;
- if (read_error_count++ > READ_ERROR_MAX)
- FATAL_ERROR ((0, 0, _("Too many errors, quitting")));
- return;
+ string = drop_volume_label_suffix (label);
+ if (string)
+ {
+ result = fnmatch (string, volume_label_option, 0) == 0;
+ free (string);
+ }
+ return result;
}
-/* Perform a read to flush the buffer. */
-void
-flush_read (void)
+/* Check if the next block contains a volume label and if this matches
+ the one given in the command line */
+static void
+match_volume_label (void)
{
- ssize_t status; /* result from system call */
- size_t left; /* bytes left */
- char *more; /* pointer to next byte to read */
-
- if (checkpoint_option && !(++checkpoint % 10))
- WARN ((0, 0, _("Read checkpoint %d"), checkpoint));
-
- /* Clear the count of errors. This only applies to a single call to
- flush_read. */
-
- read_error_count = 0; /* clear error count */
-
- if (write_archive_to_stdout && record_start_block != 0)
- {
- archive = STDOUT_FILENO;
- status = write_archive_buffer ();
- archive = STDIN_FILENO;
- if (status != record_size)
- archive_write_error (status);
- }
- if (multi_volume_option)
+ if (!volume_label)
{
- if (save_name)
- {
- char *cursor = save_name + FILESYSTEM_PREFIX_LEN (save_name);
-
- while (*cursor == '/')
- cursor++;
+ union block *label = find_next_block ();
- assign_string (&real_s_name, cursor);
- real_s_sizeleft = save_sizeleft;
- real_s_totsize = save_totsize;
+ if (!label)
+ FATAL_ERROR ((0, 0, _("Archive not labeled to match %s"),
+ quote (volume_label_option)));
+ if (label->header.typeflag == GNUTYPE_VOLHDR)
+ {
+ if (memchr (label->header.name, '\0', sizeof label->header.name))
+ assign_string (&volume_label, label->header.name);
+ else
+ {
+ volume_label = xmalloc (sizeof (label->header.name) + 1);
+ memcpy (volume_label, label->header.name,
+ sizeof (label->header.name));
+ volume_label[sizeof (label->header.name)] = 0;
+ }
}
- else
+ else if (label->header.typeflag == XGLTYPE)
{
- assign_string (&real_s_name, 0);
- real_s_totsize = 0;
- real_s_sizeleft = 0;
+ struct tar_stat_info st;
+ tar_stat_init (&st);
+ xheader_read (&st.xhdr, label,
+ OFF_FROM_HEADER (label->header.size));
+ xheader_decode (&st);
+ tar_stat_destroy (&st);
}
}
- error_loop:
- status = rmtread (archive, record_start->buffer, record_size);
- if (status == record_size)
- return;
+ if (!volume_label)
+ FATAL_ERROR ((0, 0, _("Archive not labeled to match %s"),
+ quote (volume_label_option)));
+
+ if (!check_label_pattern (volume_label))
+ FATAL_ERROR ((0, 0, _("Volume %s does not match %s"),
+ quote_n (0, volume_label),
+ quote_n (1, volume_label_option)));
+}
- if ((status == 0
- || (status < 0 && errno == ENOSPC)
- || (status > 0 && !read_full_records_option))
- && multi_volume_option)
+/* Mark the archive with volume label STR. */
+static void
+_write_volume_label (const char *str)
+{
+ if (archive_format == POSIX_FORMAT)
+ xheader_store ("GNU.volume.label", &dummy, str);
+ else
{
- union block *cursor;
+ union block *label = find_next_block ();
- try_volume:
- switch (subcommand_option)
- {
- case APPEND_SUBCOMMAND:
- case CAT_SUBCOMMAND:
- case UPDATE_SUBCOMMAND:
- if (!new_volume (ACCESS_UPDATE))
- return;
- break;
-
- default:
- if (!new_volume (ACCESS_READ))
- return;
- break;
- }
+ memset (label, 0, BLOCKSIZE);
- vol_error:
- status = rmtread (archive, record_start->buffer, record_size);
- if (status < 0)
- {
- archive_read_error ();
- goto vol_error;
- }
- if (status != record_size)
- goto short_read;
+ strcpy (label->header.name, str);
+ assign_string (¤t_stat_info.file_name,
+ label->header.name);
+ current_stat_info.had_trailing_slash =
+ strip_trailing_slashes (current_stat_info.file_name);
- cursor = record_start;
+ label->header.typeflag = GNUTYPE_VOLHDR;
+ TIME_TO_CHARS (start_time.tv_sec, label->header.mtime);
+ finish_header (¤t_stat_info, label, -1);
+ set_next_block_after (label);
+ }
+}
- if (cursor->header.typeflag == GNUTYPE_VOLHDR)
- {
- if (volume_label_option)
- {
- if (!check_label_pattern (cursor))
- {
- WARN ((0, 0, _("Volume %s does not match %s"),
- quote_n (0, cursor->header.name),
- quote_n (1, volume_label_option)));
- volno--;
- global_volno--;
- goto try_volume;
- }
- }
- if (verbose_option)
- fprintf (stdlis, _("Reading %s\n"), quote (cursor->header.name));
- cursor++;
- }
- else if (volume_label_option)
- WARN ((0, 0, _("WARNING: No volume header")));
+#define VOL_SUFFIX "Volume"
- if (real_s_name)
- {
- uintmax_t s1, s2;
- if (cursor->header.typeflag != GNUTYPE_MULTIVOL
- || strcmp (cursor->header.name, real_s_name))
- {
- WARN ((0, 0, _("%s is not continued on this volume"),
- quote (real_s_name)));
- volno--;
- global_volno--;
- goto try_volume;
- }
- s1 = UINTMAX_FROM_HEADER (cursor->header.size);
- s2 = UINTMAX_FROM_HEADER (cursor->oldgnu_header.offset);
- if (real_s_totsize != s1 + s2 || s1 + s2 < s2)
- {
- char totsizebuf[UINTMAX_STRSIZE_BOUND];
- char s1buf[UINTMAX_STRSIZE_BOUND];
- char s2buf[UINTMAX_STRSIZE_BOUND];
-
- WARN ((0, 0, _("%s is the wrong size (%s != %s + %s)"),
- quote (cursor->header.name),
- STRINGIFY_BIGINT (save_totsize, totsizebuf),
- STRINGIFY_BIGINT (s1, s1buf),
- STRINGIFY_BIGINT (s2, s2buf)));
- volno--;
- global_volno--;
- goto try_volume;
- }
- if (real_s_totsize - real_s_sizeleft
- != OFF_FROM_HEADER (cursor->oldgnu_header.offset))
- {
- WARN ((0, 0, _("This volume is out of sequence")));
- volno--;
- global_volno--;
- goto try_volume;
- }
- cursor++;
- }
- current_block = cursor;
- return;
- }
- else if (status < 0)
+/* Add a volume label to a part of multi-volume archive */
+static void
+add_volume_label (void)
+{
+ char buf[UINTMAX_STRSIZE_BOUND];
+ char *p = STRINGIFY_BIGINT (volno, buf);
+ char *s = xmalloc (strlen (volume_label_option) + sizeof VOL_SUFFIX
+ + strlen (p) + 2);
+ sprintf (s, "%s %s %s", volume_label_option, VOL_SUFFIX, p);
+ _write_volume_label (s);
+ free (s);
+}
+
+static void
+add_chunk_header (void)
+{
+ if (archive_format == POSIX_FORMAT)
{
- archive_read_error ();
- goto error_loop; /* try again */
+ off_t block_ordinal;
+ union block *blk;
+ struct tar_stat_info st;
+ static size_t real_s_part_no; /* FIXME */
+
+ real_s_part_no++;
+ memset (&st, 0, sizeof st);
+ st.orig_file_name = st.file_name = real_s_name;
+ st.stat.st_mode = S_IFREG|S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH;
+ st.stat.st_uid = getuid ();
+ st.stat.st_gid = getgid ();
+ st.orig_file_name = xheader_format_name (&st,
+ "%d/GNUFileParts.%p/%f.%n",
+ real_s_part_no);
+ st.file_name = st.orig_file_name;
+ st.archive_file_size = st.stat.st_size = real_s_sizeleft;
+
+ block_ordinal = current_block_ordinal ();
+ blk = start_header (&st);
+ if (!blk)
+ abort (); /* FIXME */
+ finish_header (&st, blk, block_ordinal);
+ free (st.orig_file_name);
}
+}
- short_read:
- more = record_start->buffer + status;
- left = record_size - status;
- while (left % BLOCKSIZE != 0
- || (left && status && read_full_records_option))
- {
- if (status)
- while ((status = rmtread (archive, more, left)) < 0)
- archive_read_error ();
+/* Add a volume label to the current archive */
+static void
+write_volume_label (void)
+{
+ if (multi_volume_option)
+ add_volume_label ();
+ else
+ _write_volume_label (volume_label_option);
+}
- if (status == 0)
- {
- if (left % BLOCKSIZE != 0)
- ERROR ((0, 0, _("%d garbage bytes ignored at end of archive"),
- (int) ((record_size - left) % BLOCKSIZE)));
- break;
- }
+/* Write GNU multi-volume header */
+static void
+gnu_add_multi_volume_header (void)
+{
+ int tmp;
+ union block *block = find_next_block ();
- if (! read_full_records_option)
- FATAL_ERROR ((0, 0, _("Unaligned block (%lu bytes) in archive"),
- (unsigned long) (record_size - left)));
+ if (strlen (real_s_name) > NAME_FIELD_SIZE)
+ WARN ((0, 0,
+ _("%s: file name too long to be stored in a GNU multivolume header, truncated"),
+ quotearg_colon (real_s_name)));
- /* User warned us about this. Fix up. */
+ memset (block, 0, BLOCKSIZE);
- left -= status;
- more += status;
- }
+ /* FIXME: Michael P Urban writes: [a long name file] is being written
+ when a new volume rolls around [...] Looks like the wrong value is
+ being preserved in real_s_name, though. */
- /* FIXME: for size=0, multi-volume support. On the first record, warn
- about the problem. */
+ strncpy (block->header.name, real_s_name, NAME_FIELD_SIZE);
+ block->header.typeflag = GNUTYPE_MULTIVOL;
- if (!read_full_records_option && verbose_option
- && record_start_block == 0 && status > 0)
- WARN ((0, 0, _("Record size = %lu blocks"),
- (unsigned long) ((record_size - left) / BLOCKSIZE)));
+ OFF_TO_CHARS (real_s_sizeleft, block->header.size);
+ OFF_TO_CHARS (real_s_totsize - real_s_sizeleft,
+ block->oldgnu_header.offset);
- record_end = record_start + (record_size - left) / BLOCKSIZE;
+ tmp = verbose_option;
+ verbose_option = 0;
+ finish_header (¤t_stat_info, block, -1);
+ verbose_option = tmp;
+ set_next_block_after (block);
}
-/* Flush the current buffer to/from the archive. */
-void
-flush_archive (void)
+/* Add a multi volume header to the current archive. The exact header format
+ depends on the archive format. */
+static void
+add_multi_volume_header (void)
{
- record_start_block += record_end - record_start;
- current_block = record_start;
- record_end = record_start + blocking_factor;
-
- if (access_mode == ACCESS_READ && time_to_start_writing)
+ if (archive_format == POSIX_FORMAT)
{
- access_mode = ACCESS_WRITE;
- time_to_start_writing = 0;
-
- if (file_to_switch_to >= 0)
- {
- if (rmtclose (archive) != 0)
- close_warn (*archive_name_cursor);
-
- archive = file_to_switch_to;
- }
- else
- backspace_output ();
+ off_t d = real_s_totsize - real_s_sizeleft;
+ xheader_store ("GNU.volume.filename", &dummy, real_s_name);
+ xheader_store ("GNU.volume.size", &dummy, &real_s_sizeleft);
+ xheader_store ("GNU.volume.offset", &dummy, &d);
}
+ else
+ gnu_add_multi_volume_header ();
+}
- switch (access_mode)
+/* Synchronize multi-volume globals */
+static void
+multi_volume_sync (void)
+{
+ if (multi_volume_option)
{
- case ACCESS_READ:
- flush_read ();
- break;
-
- case ACCESS_WRITE:
- flush_write ();
- break;
-
- case ACCESS_UPDATE:
- abort ();
+ if (save_name)
+ {
+ assign_string (&real_s_name,
+ safer_name_suffix (save_name, false,
+ absolute_names_option));
+ real_s_totsize = save_totsize;
+ real_s_sizeleft = save_sizeleft;
+ }
+ else
+ {
+ assign_string (&real_s_name, 0);
+ real_s_totsize = 0;
+ real_s_sizeleft = 0;
+ }
}
}
-/* Backspace the archive descriptor by one record worth. If it's a
- tape, MTIOCTOP will work. If it's something else, try to seek on
- it. If we can't seek, we lose! */
+\f
+/* Low-level flush functions */
+
+/* Simple flush read (no multi-volume or label extensions) */
static void
-backspace_output (void)
+simple_flush_read (void)
{
-#ifdef MTIOCTOP
- {
- struct mtop operation;
+ size_t status; /* result from system call */
- operation.mt_op = MTBSR;
- operation.mt_count = 1;
- if (rmtioctl (archive, MTIOCTOP, (char *) &operation) >= 0)
- return;
- if (errno == EIO && rmtioctl (archive, MTIOCTOP, (char *) &operation) >= 0)
- return;
- }
-#endif
-
- {
- off_t position = rmtlseek (archive, (off_t) 0, SEEK_CUR);
-
- /* Seek back to the beginning of this record and start writing there. */
+ checkpoint_run (false);
- position -= record_size;
- if (position < 0)
- position = 0;
- if (rmtlseek (archive, position, SEEK_SET) != position)
- {
- /* Lseek failed. Try a different method. */
+ /* Clear the count of errors. This only applies to a single call to
+ flush_read. */
- WARN ((0, 0,
- _("Cannot backspace archive file; it may be unreadable without -i")));
+ read_error_count = 0; /* clear error count */
- /* Replace the first part of the record with NULs. */
+ if (write_archive_to_stdout && record_start_block != 0)
+ {
+ archive = STDOUT_FILENO;
+ status = sys_write_archive_buffer ();
+ archive = STDIN_FILENO;
+ if (status != record_size)
+ archive_write_error (status);
+ }
- if (record_start->buffer != output_start)
- memset (record_start->buffer, 0,
- output_start - record_start->buffer);
- }
- }
+ for (;;)
+ {
+ status = rmtread (archive, record_start->buffer, record_size);
+ if (status == record_size)
+ {
+ records_read++;
+ return;
+ }
+ if (status == SAFE_READ_ERROR)
+ {
+ archive_read_error ();
+ continue; /* try again */
+ }
+ break;
+ }
+ short_read (status);
}
-/* Close the archive file. */
-void
-close_archive (void)
+/* Simple flush write (no multi-volume or label extensions) */
+static void
+simple_flush_write (size_t level __attribute__((unused)))
{
- if (time_to_start_writing || access_mode == ACCESS_WRITE)
- flush_archive ();
+ ssize_t status;
-#if !MSDOS
+ status = _flush_write ();
+ if (status != record_size)
+ archive_write_error (status);
+ else
+ {
+ records_written++;
+ bytes_written += status;
+ }
+}
- /* Manage to fully drain a pipe we might be reading, so to not break it on
- the producer after the EOF block. FIXME: one of these days, GNU tar
- might become clever enough to just stop working, once there is no more
- work to do, we might have to revise this area in such time. */
+\f
+/* GNU flush functions. These support multi-volume and archive labels in
+ GNU and PAX archive formats. */
- if (access_mode == ACCESS_READ
- && ! _isrmt (archive)
- && S_ISFIFO (archive_stat.st_mode))
- while (rmtread (archive, record_start->buffer, record_size) > 0)
- continue;
-#endif
+static void
+_gnu_flush_read (void)
+{
+ size_t status; /* result from system call */
- if (verify_option)
- verify_volume ();
+ checkpoint_run (false);
- if (rmtclose (archive) != 0)
- close_warn (*archive_name_cursor);
+ /* Clear the count of errors. This only applies to a single call to
+ flush_read. */
-#if !MSDOS
+ read_error_count = 0; /* clear error count */
- if (child_pid)
+ if (write_archive_to_stdout && record_start_block != 0)
{
- int wait_status;
+ archive = STDOUT_FILENO;
+ status = sys_write_archive_buffer ();
+ archive = STDIN_FILENO;
+ if (status != record_size)
+ archive_write_error (status);
+ }
- while (waitpid (child_pid, &wait_status, 0) == -1)
- if (errno != EINTR)
- {
- waitpid_error (use_compress_program_option);
- break;
- }
+ multi_volume_sync ();
- if (WIFSIGNALED (wait_status))
- ERROR ((0, 0, _("Child died with signal %d"),
- WTERMSIG (wait_status)));
- else if (WEXITSTATUS (wait_status) != 0)
- ERROR ((0, 0, _("Child returned status %d"),
- WEXITSTATUS (wait_status)));
+ for (;;)
+ {
+ status = rmtread (archive, record_start->buffer, record_size);
+ if (status == record_size)
+ {
+ records_read++;
+ return;
+ }
+
+ /* The condition below used to include
+ || (status > 0 && !read_full_records)
+ This is incorrect since even if new_volume() succeeds, the
+ subsequent call to rmtread will overwrite the chunk of data
+ already read in the buffer, so the processing will fail */
+ if ((status == 0
+ || (status == SAFE_READ_ERROR && errno == ENOSPC))
+ && multi_volume_option)
+ {
+ while (!try_new_volume ())
+ ;
+ if (current_block == record_end)
+ /* Necessary for blocking_factor == 1 */
+ flush_archive();
+ return;
+ }
+ else if (status == SAFE_READ_ERROR)
+ {
+ archive_read_error ();
+ continue;
+ }
+ break;
}
-#endif /* !MSDOS */
+ short_read (status);
+}
- if (current_file_name)
- free (current_file_name);
- if (current_link_name)
- free (current_link_name);
- if (save_name)
- free (save_name);
- if (real_s_name)
- free (real_s_name);
- free (multi_volume_option ? record_start - 2 : record_start);
+static void
+gnu_flush_read (void)
+{
+ flush_read_ptr = simple_flush_read; /* Avoid recursion */
+ _gnu_flush_read ();
+ flush_read_ptr = gnu_flush_read;
}
-/* Called to initialize the global volume number. */
-void
-init_volume_number (void)
+static void
+_gnu_flush_write (size_t buffer_level)
{
- FILE *file = fopen (volno_file_option, "r");
+ ssize_t status;
+ union block *header;
+ char *copy_ptr;
+ size_t copy_size;
+ size_t bufsize;
+ tarlong wrt;
- if (file)
+ status = _flush_write ();
+ if (status != record_size && !multi_volume_option)
+ archive_write_error (status);
+ else
{
- if (fscanf (file, "%d", &global_volno) != 1
- || global_volno < 0)
- FATAL_ERROR ((0, 0, _("%s: contains invalid volume number"),
- quotearg_colon (volno_file_option)));
- if (ferror (file))
- read_error (volno_file_option);
- if (fclose (file) != 0)
- close_error (volno_file_option);
+ if (status)
+ records_written++;
+ bytes_written += status;
}
- else if (errno != ENOENT)
- open_error (volno_file_option);
-}
-/* Called to write out the closing global volume number. */
-void
-closeout_volume_number (void)
-{
- FILE *file = fopen (volno_file_option, "w");
+ if (status == record_size)
+ {
+ multi_volume_sync ();
+ return;
+ }
- if (file)
+ if (status % BLOCKSIZE)
{
- fprintf (file, "%d\n", global_volno);
- if (ferror (file))
- write_error (volno_file_option);
- if (fclose (file) != 0)
- close_error (volno_file_option);
+ ERROR ((0, 0, _("write did not end on a block boundary")));
+ archive_write_error (status);
}
- else
- open_error (volno_file_option);
-}
-/* We've hit the end of the old volume. Close it and open the next one.
- Return nonzero on success. */
-static int
-new_volume (enum access_mode access)
-{
- static FILE *read_file;
- static int looped;
+ /* In multi-volume mode. */
+ /* ENXIO is for the UNIX PC. */
+ if (status < 0 && errno != ENOSPC && errno != EIO && errno != ENXIO)
+ archive_write_error (status);
- if (!read_file && !info_script_option)
- /* FIXME: if fopen is used, it will never be closed. */
- read_file = archive == STDIN_FILENO ? fopen (TTY_NAME, "r") : stdin;
+ real_s_sizeleft -= status;
+ if (!new_volume (ACCESS_WRITE))
+ return;
- if (now_verifying)
- return 0;
- if (verify_option)
- verify_volume ();
+ tar_stat_destroy (&dummy);
- if (rmtclose (archive) != 0)
- close_warn (*archive_name_cursor);
+ increase_volume_number ();
+ prev_written += bytes_written;
+ bytes_written = 0;
- global_volno++;
- if (global_volno < 0)
- FATAL_ERROR ((0, 0, _("Volume number overflow")));
- volno++;
- archive_name_cursor++;
- if (archive_name_cursor == archive_name_array + archive_names)
+ copy_ptr = record_start->buffer + status;
+ copy_size = buffer_level - status;
+
+ /* Switch to the next buffer */
+ record_index = !record_index;
+ init_buffer ();
+
+ if (volume_label_option)
+ add_volume_label ();
+
+ if (real_s_name)
+ add_multi_volume_header ();
+
+ write_extended (true, &dummy, find_next_block ());
+ tar_stat_destroy (&dummy);
+
+ if (real_s_name)
+ add_chunk_header ();
+ wrt = bytes_written;
+ header = find_next_block ();
+ bufsize = available_space_after (header);
+ while (bufsize < copy_size)
{
- archive_name_cursor = archive_name_array;
- looped = 1;
+ memcpy (header->buffer, copy_ptr, bufsize);
+ copy_ptr += bufsize;
+ copy_size -= bufsize;
+ set_next_block_after (header + (bufsize - 1) / BLOCKSIZE);
+ header = find_next_block ();
+ bufsize = available_space_after (header);
}
-
- tryagain:
- if (looped)
+ memcpy (header->buffer, copy_ptr, copy_size);
+ memset (header->buffer + copy_size, 0, bufsize - copy_size);
+ set_next_block_after (header + (copy_size - 1) / BLOCKSIZE);
+ if (multi_volume_option && wrt < bytes_written)
{
- /* We have to prompt from now on. */
-
- if (info_script_option)
- {
- if (volno_file_option)
- closeout_volume_number ();
- system (info_script_option);
- }
- else
- while (1)
- {
- char input_buffer[80];
-
- fputc ('\007', stderr);
- fprintf (stderr,
- _("Prepare volume #%d for %s and hit return: "),
- global_volno, quote (*archive_name_cursor));
- fflush (stderr);
-
- if (fgets (input_buffer, sizeof input_buffer, read_file) == 0)
- {
- WARN ((0, 0, _("EOF where user reply was expected")));
-
- if (subcommand_option != EXTRACT_SUBCOMMAND
- && subcommand_option != LIST_SUBCOMMAND
- && subcommand_option != DIFF_SUBCOMMAND)
- WARN ((0, 0, _("WARNING: Archive is incomplete")));
-
- fatal_exit ();
- }
- if (input_buffer[0] == '\n'
- || input_buffer[0] == 'y'
- || input_buffer[0] == 'Y')
- break;
-
- switch (input_buffer[0])
- {
- case '?':
- {
- fprintf (stderr, _("\
- n [name] Give a new file name for the next (and subsequent) volume(s)\n\
- q Abort tar\n\
- ! Spawn a subshell\n\
- ? Print this list\n"));
- }
- break;
-
- case 'q':
- /* Quit. */
-
- WARN ((0, 0, _("No new volume; exiting.\n")));
-
- if (subcommand_option != EXTRACT_SUBCOMMAND
- && subcommand_option != LIST_SUBCOMMAND
- && subcommand_option != DIFF_SUBCOMMAND)
- WARN ((0, 0, _("WARNING: Archive is incomplete")));
-
- fatal_exit ();
-
- case 'n':
- /* Get new file name. */
-
- {
- char *name = &input_buffer[1];
- char *cursor;
-
- while (*name == ' ' || *name == '\t')
- name++;
- cursor = name;
- while (*cursor && *cursor != '\n')
- cursor++;
- *cursor = '\0';
-
- /* FIXME: the following allocation is never reclaimed. */
- *archive_name_cursor = xstrdup (name);
- }
- break;
-
- case '!':
-#if MSDOS
- spawnl (P_WAIT, getenv ("COMSPEC"), "-", 0);
-#else /* not MSDOS */
- {
- pid_t child;
- const char *shell = getenv ("SHELL");
- if (! shell)
- shell = "/bin/sh";
- child = xfork ();
- if (child == 0)
- {
- execlp (shell, "-sh", "-i", 0);
- exec_fatal (shell);
- }
- else
- {
- int wait_status;
- while (waitpid (child, &wait_status, 0) == -1)
- if (errno != EINTR)
- {
- waitpid_error (shell);
- break;
- }
- }
- }
-#endif /* not MSDOS */
- break;
- }
- }
+ /* The value of bytes_written has changed while moving data;
+ that means that flush_archive was executed at least once in
+ between, and, as a consequence, copy_size bytes were not written
+ to disk. We need to update sizeleft variables to compensate for
+ that. */
+ save_sizeleft += copy_size;
+ multi_volume_sync ();
}
+ find_next_block ();
+}
- if (verify_option)
- archive = rmtopen (*archive_name_cursor, O_RDWR | O_CREAT, MODE_RW,
- rsh_command_option);
- else
- switch (access)
- {
- case ACCESS_READ:
- archive = rmtopen (*archive_name_cursor, O_RDONLY, MODE_RW,
- rsh_command_option);
- break;
+static void
+gnu_flush_write (size_t buffer_level)
+{
+ flush_write_ptr = simple_flush_write; /* Avoid recursion */
+ _gnu_flush_write (buffer_level);
+ flush_write_ptr = gnu_flush_write;
+}
- case ACCESS_WRITE:
- if (backup_option)
- maybe_backup_file (*archive_name_cursor, 1);
- archive = rmtcreat (*archive_name_cursor, MODE_RW,
- rsh_command_option);
- break;
+void
+flush_read ()
+{
+ flush_read_ptr ();
+}
- case ACCESS_UPDATE:
- archive = rmtopen (*archive_name_cursor, O_RDWR | O_CREAT, MODE_RW,
- rsh_command_option);
- break;
- }
+void
+flush_write ()
+{
+ flush_write_ptr (record_size);
+}
- if (archive < 0)
- {
- open_warn (*archive_name_cursor);
- if (!verify_option && access == ACCESS_WRITE && backup_option)
- undo_last_backup ();
- goto tryagain;
- }
+void
+open_archive (enum access_mode wanted_access)
+{
+ flush_read_ptr = gnu_flush_read;
+ flush_write_ptr = gnu_flush_write;
-#if MSDOS
- setmode (archive, O_BINARY);
-#endif
+ _open_archive (wanted_access);
+ switch (wanted_access)
+ {
+ case ACCESS_READ:
+ case ACCESS_UPDATE:
+ if (volume_label_option)
+ match_volume_label ();
+ break;
- return 1;
+ case ACCESS_WRITE:
+ records_written = 0;
+ if (volume_label_option)
+ write_volume_label ();
+ break;
+ }
+ set_volume_start_time ();
}