]> Dogcows Code - chaz/tar/blobdiff - src/buffer.c
Minor changes.
[chaz/tar] / src / buffer.c
index 8347a58a7a72b831b79d0471d01f0b3e01378944..e52b1b10fde6bf2a5250d71c47c4bcb4bc4d641d 100644 (file)
@@ -1,10 +1,14 @@
 /* Buffer management for tar.
 /* Buffer management for tar.
-   Copyright 1988, 92, 93, 94, 96, 97, 99, 2000 Free Software Foundation, Inc.
+
+   Copyright (C) 1988, 1992, 1993, 1994, 1996, 1997, 1999, 2000, 2001,
+   2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+   Foundation, Inc.
+
    Written by John Gilmore, on 1985-08-25.
 
    This program is free software; you can redistribute it and/or modify it
    under the terms of the GNU General Public License as published by the
    Written by John Gilmore, on 1985-08-25.
 
    This program is free software; you can redistribute it and/or modify it
    under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2, or (at your option) any later
+   Free Software Foundation; either version 3, or (at your option) any later
    version.
 
    This program is distributed in the hope that it will be useful, but
    version.
 
    This program is distributed in the hope that it will be useful, but
 
    You should have received a copy of the GNU General Public License along
    with this program; if not, write to the Free Software Foundation, Inc.,
 
    You should have received a copy of the GNU General Public License along
    with this program; if not, write to the Free Software Foundation, Inc.,
-   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-/* Enable GNU extensions in fnmatch.h.  */
-#ifndef _GNU_SOURCE
-# define _GNU_SOURCE 1
-#endif
+   51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  */
 
 
-#include "system.h"
+#include <system.h>
+#include <system-ioctl.h>
 
 #include <signal.h>
 
 #include <signal.h>
-#include <time.h>
-#ifndef time
-time_t time ();
-#endif
-
-#if MSDOS
-# include <process.h>
-#endif
-
-#if XENIX
-# include <sys/inode.h>
-#endif
 
 
+#include <closeout.h>
 #include <fnmatch.h>
 #include <human.h>
 #include <quotearg.h>
 
 #include "common.h"
 #include <fnmatch.h>
 #include <human.h>
 #include <quotearg.h>
 
 #include "common.h"
-#include "rmt.h"
-
-#define        PREAD 0                 /* read file descriptor from pipe() */
-#define        PWRITE 1                /* write file descriptor from pipe() */
+#include <rmt.h>
 
 /* Number of retries before giving up on read.  */
 
 /* Number of retries before giving up on read.  */
-#define        READ_ERROR_MAX 10
+#define READ_ERROR_MAX 10
 
 
-/* Globbing pattern to append to volume label if initial match failed.  */
-#define VOLUME_LABEL_APPEND " Volume [1-9]*"
-\f
 /* Variables.  */
 
 /* Variables.  */
 
-static tarlong prev_written;   /* bytes written on previous volumes */
-static tarlong bytes_written;  /* bytes written on this volume */
+static tarlong prev_written;    /* bytes written on previous volumes */
+static tarlong bytes_written;   /* bytes written on this volume */
+static void *record_buffer[2];  /* allocated memory */
+union block *record_buffer_aligned[2];
+static int record_index;
 
 
-/* FIXME: The following four variables should ideally be static to this
-   module.  However, this cannot be done yet, as update.c uses the first
-   three a lot, and compare.c uses the fourth.  The cleanup continues!  */
+/* FIXME: The following variables should ideally be static to this
+   module.  However, this cannot be done yet.  The cleanup continues!  */
 
 
-union block *record_start;     /* start of record of archive */
-union block *record_end;       /* last+1 block of archive record */
-union block *current_block;    /* current block of archive */
-enum access_mode access_mode;  /* how do we handle the archive */
-static struct stat archive_stat; /* stat block for archive file */
+union block *record_start;      /* start of record of archive */
+union block *record_end;        /* last+1 block of archive record */
+union block *current_block;     /* current block of archive */
+enum access_mode access_mode;   /* how do we handle the archive */
+off_t records_read;             /* number of records read from this archive */
+off_t records_written;          /* likewise, for records written */
+extern off_t records_skipped;   /* number of records skipped at the start
+                                   of the archive, defined in delete.c */
 
 static off_t record_start_block; /* block ordinal at record_start */
 
 
 static off_t record_start_block; /* block ordinal at record_start */
 
-/* Where we write list messages (not errors, not interactions) to.  Stdout
-   unless we're writing a pipe, in which case stderr.  */
+/* Where we write list messages (not errors, not interactions) to.  */
 FILE *stdlis;
 
 FILE *stdlis;
 
-static void backspace_output PARAMS ((void));
-static int new_volume PARAMS ((enum access_mode));
-static void archive_write_error PARAMS ((ssize_t)) __attribute__ ((noreturn));
-static void archive_read_error PARAMS ((void));
-
-#if !MSDOS
-/* Obnoxious test to see if dimwit is trying to dump the archive.  */
-dev_t ar_dev;
-ino_t ar_ino;
-#endif
+static void backspace_output (void);
 
 /* PID of child program, if compress_option or remote archive access.  */
 static pid_t child_pid;
 
 /* PID of child program, if compress_option or remote archive access.  */
 static pid_t child_pid;
@@ -92,795 +70,733 @@ static pid_t child_pid;
 static int read_error_count;
 
 /* Have we hit EOF yet?  */
 static int read_error_count;
 
 /* Have we hit EOF yet?  */
-static int hit_eof;
-
-/* Checkpointing counter */
-static int checkpoint;
-
-/* We're reading, but we just read the last block and its time to update.  */
-/* As least EXTERN like this one as possible.  FIXME!  */
-extern int time_to_start_writing;
-
-int file_to_switch_to = -1;    /* if remote update, close archive, and use
-                                  this descriptor to write to */
-
-static int volno = 1;          /* which volume of a multi-volume tape we're
-                                  on */
-static int global_volno = 1;   /* volume number to print in external
-                                  messages */
-
-/* The pointer save_name, which is set in function dump_file() of module
-   create.c, points to the original long filename instead of the new,
-   shorter mangled name that is set in start_header() of module create.c.
-   The pointer save_name is only used in multi-volume mode when the file
-   being processed is non-sparse; if a file is split between volumes, the
-   save_name is used in generating the LF_MULTIVOL record on the second
-   volume.  (From Pierce Cantrell, 1991-08-13.)  */
-
-char *save_name;               /* name of the file we are currently writing */
-off_t save_totsize;            /* total size of file we are writing, only
-                                  valid if save_name is nonzero */
-off_t save_sizeleft;           /* where we are in the file we are writing,
-                                  only valid if save_name is nonzero */
-
-int write_archive_to_stdout;
-
-/* Used by flush_read and flush_write to store the real info about saved
-   names.  */
-static char *real_s_name;
-static off_t real_s_totsize;
-static off_t real_s_sizeleft;
+static bool hit_eof;
+
+static bool read_full_records = false;
+
+/* We're reading, but we just read the last block and it's time to update.
+   Declared in update.c
+
+   FIXME: Either eliminate it or move it to common.h.
+*/
+extern bool time_to_start_writing;
+
+bool write_archive_to_stdout;
+
+void (*flush_write_ptr) (size_t);
+void (*flush_read_ptr) (void);
+
 \f
 \f
-/* Functions.  */
+char *volume_label;
+char *continued_file_name;
+uintmax_t continued_file_size;
+uintmax_t continued_file_offset;
 
 
-void
-print_total_written (void)
-{
-  tarlong written = prev_written + bytes_written;
-  char bytes[sizeof (tarlong) * CHAR_BIT];
-  char abbr[LONGEST_HUMAN_READABLE + 1];
-  char rate[LONGEST_HUMAN_READABLE + 1];
-  double seconds;
+\f
+static int volno = 1;           /* which volume of a multi-volume tape we're
+                                   on */
+static int global_volno = 1;    /* volume number to print in external
+                                   messages */
 
 
-#if HAVE_CLOCK_GETTIME
-  struct timespec now;
-  if (clock_gettime (CLOCK_REALTIME, &now) == 0)
-    seconds = ((now.tv_sec - start_timespec.tv_sec)
-              + (now.tv_nsec - start_timespec.tv_nsec) / 1e9);
-  else
-#endif
-    seconds = time (0) - start_time;
+bool write_archive_to_stdout;
 
 
-  sprintf (bytes, TARLONG_FORMAT, written);
+\f
+/* Multi-volume tracking support */
 
 
-  /* Amanda 2.4.1p1 looks for "Total bytes written: [0-9][0-9]*".  */
-  fprintf (stderr, _("Total bytes written: %s (%sB, %sB/s)\n"), bytes,
-          human_readable ((uintmax_t) written, abbr, 1, -1024),
-          (0 < seconds && written / seconds < (uintmax_t) -1
-           ? human_readable ((uintmax_t) (written / seconds), rate, 1, -1024)
-           : "?"));
-}
+/* When creating a multi-volume archive, each `bufmap' represents
+   a member stored (perhaps partly) in the current record buffer.
+   After flushing the record to the output media, all bufmaps that
+   represent fully written members are removed from the list, then
+   the sizeleft and start numbers in the remaining bufmaps are updated.
 
 
-/*--------------------------------------------------------.
-| Compute and return the block ordinal at current_block.  |
-`--------------------------------------------------------*/
+   When reading from a multi-volume archive, the list degrades to a
+   single element, which keeps information about the member currently
+   being read.
+*/
 
 
-off_t
-current_block_ordinal (void)
+struct bufmap
 {
 {
-  return record_start_block + (current_block - record_start);
-}
-
-/*------------------------------------------------------------------.
-| If the EOF flag is set, reset it, as well as current_block, etc.  |
-`------------------------------------------------------------------*/
+  struct bufmap *next;          /* Pointer to the next map entry */
+  size_t start;                 /* Offset of the first data block */
+  char *file_name;              /* Name of the stored file */
+  off_t sizetotal;              /* Size of the stored file */
+  off_t sizeleft;               /* Size left to read/write */
+};
+static struct bufmap *bufmap_head, *bufmap_tail;
+
+/* This variable, when set, inhibits updating the bufmap chain after
+   a write.  This is necessary when writing extended POSIX headers. */
+static int inhibit_map;
 
 void
 
 void
-reset_eof (void)
+mv_begin_write (const char *file_name, off_t totsize, off_t sizeleft)
 {
 {
-  if (hit_eof)
+  if (multi_volume_option)
     {
     {
-      hit_eof = 0;
-      current_block = record_start;
-      record_end = record_start + blocking_factor;
-      access_mode = ACCESS_WRITE;
+      struct bufmap *bp = xmalloc (sizeof bp[0]);
+      if (bufmap_tail)
+       bufmap_tail->next = bp;
+      else
+       bufmap_head = bp;
+      bufmap_tail = bp;
+
+      bp->next = NULL;
+      bp->start = current_block - record_start;
+      bp->file_name = xstrdup (file_name);
+      bp->sizetotal = totsize;
+      bp->sizeleft = sizeleft;
     }
 }
 
     }
 }
 
-/*-------------------------------------------------------------------------.
-| Return the location of the next available input or output block.        |
-| Return zero for EOF.  Once we have returned zero, we just keep returning |
-| it, to avoid accidentally going on to the next file on the tape.        |
-`-------------------------------------------------------------------------*/
-
-union block *
-find_next_block (void)
+static struct bufmap *
+bufmap_locate (size_t off)
 {
 {
-  if (current_block == record_end)
+  struct bufmap *map;
+
+  for (map = bufmap_head; map; map = map->next)
     {
     {
-      if (hit_eof)
-       return 0;
-      flush_archive ();
-      if (current_block == record_end)
-       {
-         hit_eof = 1;
-         return 0;
-       }
+      if (!map->next
+         || off < map->next->start * BLOCKSIZE)
+       break;
     }
     }
-  return current_block;
+  return map;
 }
 
 }
 
-/*------------------------------------------------------.
-| Indicate that we have used all blocks up thru BLOCK.  |
-|                                                      |
-| FIXME: should the arg have an off-by-1?              |
-`------------------------------------------------------*/
+static void
+bufmap_free (struct bufmap *mark)
+{
+  struct bufmap *map;
+  for (map = bufmap_head; map && map != mark; )
+    {
+      struct bufmap *next = map->next;
+      free (map->file_name);
+      free (map);
+      map = next;
+    }
+  bufmap_head = map;
+  if (!bufmap_head)
+    bufmap_tail = bufmap_head;
+}
 
 
-void
-set_next_block_after (union block *block)
+static void
+bufmap_reset (struct bufmap *map, ssize_t fixup)
 {
 {
-  while (block >= current_block)
-    current_block++;
+  bufmap_free (map);
+  if (map)
+    {
+      for (; map; map = map->next)
+       map->start += fixup;
+    }
+}
 
 
-  /* Do *not* flush the archive here.  If we do, the same argument to
-     set_next_block_after could mean the next block (if the input record
-     is exactly one block long), which is not what is intended.  */
+\f
+static struct tar_stat_info dummy;
 
 
-  if (current_block > record_end)
-    abort ();
+void
+buffer_write_global_xheader ()
+{
+  xheader_write_global (&dummy.xhdr);
 }
 
 }
 
-/*------------------------------------------------------------------------.
-| Return the number of bytes comprising the space between POINTER through |
-| the end of the current buffer of blocks.  This space is available for          |
-| filling with data, or taking data from.  POINTER is usually (but not   |
-| always) the result previous find_next_block call.                      |
-`------------------------------------------------------------------------*/
-
-size_t
-available_space_after (union block *pointer)
+void
+mv_begin_read (struct tar_stat_info *st)
 {
 {
-  return record_end->buffer - pointer->buffer;
+  mv_begin_write (st->orig_file_name, st->stat.st_size, st->stat.st_size);
 }
 
 }
 
-/*------------------------------------------------------------------.
-| Close file having descriptor FD, and abort if close unsuccessful. |
-`------------------------------------------------------------------*/
+void
+mv_end ()
+{
+  if (multi_volume_option)
+    bufmap_free (NULL);
+}
 
 
-static void
-xclose (int fd)
+void
+mv_size_left (off_t size)
 {
 {
-  if (close (fd) != 0)
-    close_error (_("(pipe)"));
+  if (bufmap_head)
+    bufmap_head->sizeleft = size;
 }
 
 }
 
-/* Duplicate file descriptor FROM into becoming INTO.
-   INTO is closed first and has to be the next available slot.  */
+\f
+/* Functions.  */
 
 
-static void
-xdup2 (int from, int into)
+void
+clear_read_error_count (void)
 {
 {
-  if (from != into)
-    {
-      int status = close (into);
-
-      if (status != 0 && errno != EBADF)
-       {
-         int e = errno;
-         FATAL_ERROR ((0, e, _("Cannot close")));
-       }
-      status = dup (from);
-      if (status != into)
-       {
-         if (status < 0)
-           {
-             int e = errno;
-             FATAL_ERROR ((0, e, _("Cannot dup")));
-           }
-         abort ();
-       }
-      xclose (from);
-    }
+  read_error_count = 0;
 }
 
 }
 
-#if MSDOS
+\f
+/* Time-related functions */
 
 
-/*-------------------------------------------------------.
-| Set ARCHIVE for writing, then compressing an archive.         |
-`-------------------------------------------------------*/
+double duration;
 
 
-static void
-child_open_for_compress (void)
+void
+set_start_time ()
 {
 {
-  FATAL_ERROR ((0, 0, _("Cannot use compressed or remote archives")));
+  gettime (&start_time);
+  volume_start_time = start_time;
+  last_stat_time = start_time;
 }
 
 }
 
-/*---------------------------------------------------------.
-| Set ARCHIVE for uncompressing, then reading an archive.  |
-`---------------------------------------------------------*/
-
 static void
 static void
-child_open_for_uncompress (void)
+set_volume_start_time (void)
 {
 {
-  FATAL_ERROR ((0, 0, _("Cannot use compressed or remote archives")));
+  gettime (&volume_start_time);
+  last_stat_time = volume_start_time;
 }
 
 }
 
-#else /* not MSDOS */
+void
+compute_duration ()
+{
+  struct timespec now;
+  gettime (&now);
+  duration += ((now.tv_sec - last_stat_time.tv_sec)
+               + (now.tv_nsec - last_stat_time.tv_nsec) / 1e9);
+  gettime (&last_stat_time);
+}
 
 
-/*---------------------------------------------------------------------.
-| Return nonzero if NAME is the name of a regular file, or if the file |
-| does not exist (so it would be created as a regular file).          |
-`---------------------------------------------------------------------*/
+\f
+/* Compression detection */
+
+enum compress_type {
+  ct_none,             /* Unknown compression type */
+  ct_tar,              /* Plain tar file */
+  ct_compress,
+  ct_gzip,
+  ct_bzip2,
+  ct_lzip,
+  ct_lzma,
+  ct_lzop,
+  ct_xz
+};
+
+static enum compress_type archive_compression_type = ct_none;
+
+struct zip_magic
+{
+  enum compress_type type;
+  size_t length;
+  char const *magic;
+};
 
 
-static int
-is_regular_file (const char *name)
+struct zip_program
 {
 {
-  struct stat stbuf;
+  enum compress_type type;
+  char const *program;
+  char const *option;
+};
+
+static struct zip_magic const magic[] = {
+  { ct_none, },
+  { ct_tar },
+  { ct_compress, 2, "\037\235" },
+  { ct_gzip,     2, "\037\213" },
+  { ct_bzip2,    3, "BZh" },
+  { ct_lzip,     4, "LZIP" },
+  { ct_lzma,     6, "\xFFLZMA" },
+  { ct_lzop,     4, "\211LZO" },
+  { ct_xz,       6, "\xFD" "7zXZ" },
+};
+
+#define NMAGIC (sizeof(magic)/sizeof(magic[0]))
+
+static struct zip_program zip_program[] = {
+  { ct_compress, COMPRESS_PROGRAM, "-Z" },
+  { ct_compress, GZIP_PROGRAM,     "-z" },
+  { ct_gzip,     GZIP_PROGRAM,     "-z" },
+  { ct_bzip2,    BZIP2_PROGRAM,    "-j" },
+  { ct_bzip2,    "lbzip2",         "-j" },
+  { ct_lzip,     LZIP_PROGRAM,     "--lzip" },
+  { ct_lzma,     LZMA_PROGRAM,     "--lzma" },
+  { ct_lzma,     XZ_PROGRAM,       "-J" },
+  { ct_lzop,     LZOP_PROGRAM,     "--lzop" },
+  { ct_xz,       XZ_PROGRAM,       "-J" },
+  { ct_none }
+};
+
+static struct zip_program const *
+find_zip_program (enum compress_type type, int *pstate)
+{
+  int i;
 
 
-  if (stat (name, &stbuf) == 0)
-    return S_ISREG (stbuf.st_mode);
-  else
-    return errno == ENOENT;
+  for (i = *pstate; zip_program[i].type != ct_none; i++)
+    {
+      if (zip_program[i].type == type)
+       {
+         *pstate = i + 1;
+         return zip_program + i;
+       }
+    }
+  *pstate = i;
+  return NULL;
 }
 
 }
 
-static ssize_t
-write_archive_buffer (void)
+const char *
+first_decompress_program (int *pstate)
 {
 {
-  ssize_t status;
-  ssize_t written = 0;
+  struct zip_program const *zp;
+  
+  if (use_compress_program_option)
+    return use_compress_program_option;
 
 
-  while (0 <= (status = rmtwrite (archive, record_start->buffer + written,
-                                 record_size - written)))
-    {
-      written += status;
-      if (written == record_size
-         || _isrmt (archive) || ! S_ISFIFO (archive_stat.st_mode))
-       break;
-    }
+  if (archive_compression_type == ct_none)
+    return NULL;
 
 
-  return written ? written : status;
+  *pstate = 0; 
+  zp = find_zip_program (archive_compression_type, pstate);
+  return zp ? zp->program : NULL;
+}
+    
+const char *
+next_decompress_program (int *pstate)
+{
+  struct zip_program const *zp;
+  
+  if (use_compress_program_option)
+    return NULL;
+  zp = find_zip_program (archive_compression_type, pstate);
+  return zp ? zp->program : NULL;
 }
 
 }
 
-/*-------------------------------------------------------.
-| Set ARCHIVE for writing, then compressing an archive.         |
-`-------------------------------------------------------*/
+static const char *
+compress_option (enum compress_type type)
+{
+  struct zip_program const *zp;
+  int i = 0;
+  zp = find_zip_program (type, &i);
+  return zp ? zp->option : NULL;
+}
 
 
-static void
-child_open_for_compress (void)
+/* Check if the file ARCHIVE is a compressed archive. */
+static enum compress_type
+check_compressed_archive (bool *pshort)
 {
 {
-  int parent_pipe[2];
-  int child_pipe[2];
-  pid_t grandchild_pid;
+  struct zip_magic const *p;
+  bool sfr;
+  bool temp;
 
 
-  xpipe (parent_pipe);
-  child_pid = xfork ();
+  if (!pshort)
+    pshort = &temp;
 
 
-  if (child_pid > 0)
-    {
-      /* The parent tar is still here!  Just clean up.  */
+  /* Prepare global data needed for find_next_block: */
+  record_end = record_start; /* set up for 1st record = # 0 */
+  sfr = read_full_records;
+  read_full_records = true; /* Suppress fatal error on reading a partial
+                               record */
+  *pshort = find_next_block () == 0;
 
 
-      archive = parent_pipe[PWRITE];
-      xclose (parent_pipe[PREAD]);
-      return;
-    }
+  /* Restore global values */
+  read_full_records = sfr;
 
 
-  /* The new born child tar is here!  */
+  if (tar_checksum (record_start, true) == HEADER_SUCCESS)
+    /* Probably a valid header */
+    return ct_tar;
 
 
-  program_name = _("tar (child)");
+  for (p = magic + 2; p < magic + NMAGIC; p++)
+    if (memcmp (record_start->buffer, p->magic, p->length) == 0)
+      return p->type;
 
 
-  xdup2 (parent_pipe[PREAD], STDIN_FILENO);
-  xclose (parent_pipe[PWRITE]);
+  return ct_none;
+}
 
 
-  /* Check if we need a grandchild tar.  This happens only if either:
-     a) we are writing stdout: to force reblocking;
-     b) the file is to be accessed by rmt: compressor doesn't know how;
-     c) the file is not a plain file.  */
+/* Guess if the archive is seekable. */
+static void
+guess_seekable_archive (void)
+{
+  struct stat st;
 
 
-  if (strcmp (archive_name_array[0], "-") != 0
-      && !_remdev (archive_name_array[0])
-      && is_regular_file (archive_name_array[0]))
+  if (subcommand_option == DELETE_SUBCOMMAND)
     {
     {
-      if (backup_option)
-       maybe_backup_file (archive_name_array[0], 1);
-
-      /* We don't need a grandchild tar.  Open the archive and launch the
-        compressor.  */
-
-      archive = creat (archive_name_array[0], MODE_RW);
-      if (archive < 0)
-       {
-         int saved_errno = errno;
-
-         if (backup_option)
-           undo_last_backup ();
-         errno = saved_errno;
-         open_fatal (archive_name_array[0]);
-       }
-      xdup2 (archive, STDOUT_FILENO);
-      execlp (use_compress_program_option, use_compress_program_option,
-             (char *) 0);
-      exec_fatal (use_compress_program_option);
+      /* The current code in delete.c is based on the assumption that
+        skip_member() reads all data from the archive. So, we should
+        make sure it won't use seeks. On the other hand, the same code
+        depends on the ability to backspace a record in the archive,
+        so setting seekable_archive to false is technically incorrect.
+         However, it is tested only in skip_member(), so it's not a
+        problem. */
+      seekable_archive = false;
     }
 
     }
 
-  /* We do need a grandchild tar.  */
-
-  xpipe (child_pipe);
-  grandchild_pid = xfork ();
-
-  if (grandchild_pid > 0)
+  if (seek_option != -1)
     {
     {
-      /* The child tar is still here!  Launch the compressor.  */
-
-      xdup2 (child_pipe[PWRITE], STDOUT_FILENO);
-      xclose (child_pipe[PREAD]);
-      execlp (use_compress_program_option, use_compress_program_option,
-             (char *) 0);
-      exec_fatal (use_compress_program_option);
+      seekable_archive = !!seek_option;
+      return;
     }
 
     }
 
-  /* The new born grandchild tar is here!  */
-
-  program_name = _("tar (grandchild)");
-
-  /* Prepare for reblocking the data from the compressor into the archive.  */
+  if (!multi_volume_option && !use_compress_program_option
+      && fstat (archive, &st) == 0)
+    seekable_archive = S_ISREG (st.st_mode);
+  else
+    seekable_archive = false;
+}
 
 
-  xdup2 (child_pipe[PREAD], STDIN_FILENO);
-  xclose (child_pipe[PWRITE]);
+/* Open an archive named archive_name_array[0]. Detect if it is
+   a compressed archive of known type and use corresponding decompression
+   program if so */
+static int
+open_compressed_archive (void)
+{
+  archive = rmtopen (archive_name_array[0], O_RDONLY | O_BINARY,
+                     MODE_RW, rsh_command_option);
+  if (archive == -1)
+    return archive;
 
 
-  if (strcmp (archive_name_array[0], "-") == 0)
-    archive = STDOUT_FILENO;
-  else
+  if (!multi_volume_option)
     {
     {
-      archive = rmtcreat (archive_name_array[0], MODE_RW, rsh_command_option);
-      if (archive < 0)
-       open_fatal (archive_name_array[0]);
+      if (!use_compress_program_option)
+        {
+          bool shortfile;
+          enum compress_type type = check_compressed_archive (&shortfile);
+
+          switch (type)
+            {
+            case ct_tar:
+              if (shortfile)
+                ERROR ((0, 0, _("This does not look like a tar archive")));
+              return archive;
+
+            case ct_none:
+              if (shortfile)
+                ERROR ((0, 0, _("This does not look like a tar archive")));
+              set_compression_program_by_suffix (archive_name_array[0], NULL);
+              if (!use_compress_program_option)
+               return archive;
+              break;
+
+            default:
+              archive_compression_type = type;
+              break;
+            }
+        }
+
+      /* FD is not needed any more */
+      rmtclose (archive);
+
+      hit_eof = false; /* It might have been set by find_next_block in
+                          check_compressed_archive */
+
+      /* Open compressed archive */
+      child_pid = sys_child_open_for_uncompress ();
+      read_full_records = true;
     }
 
     }
 
-  /* Let's read out of the stdin pipe and write an archive.  */
-
-  while (1)
-    {
-      ssize_t status = 0;
-      char *cursor;
-      size_t length;
+  records_read = 0;
+  record_end = record_start; /* set up for 1st record = # 0 */
 
 
-      /* Assemble a record.  */
+  return archive;
+}
+\f
 
 
-      for (length = 0, cursor = record_start->buffer;
-          length < record_size;
-          length += status, cursor += status)
-       {
-         size_t size = record_size - length;
+static void
+print_stats (FILE *fp, const char *text, tarlong numbytes)
+{
+  char bytes[sizeof (tarlong) * CHAR_BIT];
+  char abbr[LONGEST_HUMAN_READABLE + 1];
+  char rate[LONGEST_HUMAN_READABLE + 1];
 
 
-         if (size < BLOCKSIZE)
-           size = BLOCKSIZE;
-         status = safe_read (STDIN_FILENO, cursor, size);
-         if (status <= 0)
-           break;
-       }
+  int human_opts = human_autoscale | human_base_1024 | human_SI | human_B;
 
 
-      if (status < 0)
-       read_fatal (use_compress_program_option);
+  sprintf (bytes, TARLONG_FORMAT, numbytes);
 
 
-      /* Copy the record.  */
+  fprintf (fp, "%s: %s (%s, %s/s)\n",
+           text, bytes,
+           human_readable (numbytes, abbr, human_opts, 1, 1),
+           (0 < duration && numbytes / duration < (uintmax_t) -1
+            ? human_readable (numbytes / duration, rate, human_opts, 1, 1)
+            : "?"));
+}
 
 
-      if (status == 0)
-       {
-         /* We hit the end of the file.  Write last record at
-            full length, as the only role of the grandchild is
-            doing proper reblocking.  */
+void
+print_total_stats ()
+{
+  switch (subcommand_option)
+    {
+    case CREATE_SUBCOMMAND:
+    case CAT_SUBCOMMAND:
+    case UPDATE_SUBCOMMAND:
+    case APPEND_SUBCOMMAND:
+      /* Amanda 2.4.1p1 looks for "Total bytes written: [0-9][0-9]*".  */
+      print_stats (stderr, _("Total bytes written"),
+                   prev_written + bytes_written);
+      break;
 
 
-         if (length > 0)
-           {
-             memset (record_start->buffer + length, 0, record_size - length);
-             status = write_archive_buffer ();
-             if (status != record_size)
-               archive_write_error (status);
-           }
+    case DELETE_SUBCOMMAND:
+      {
+        char buf[UINTMAX_STRSIZE_BOUND];
+        print_stats (stderr, _("Total bytes read"),
+                     records_read * record_size);
+        print_stats (stderr, _("Total bytes written"),
+                     prev_written + bytes_written);
+        fprintf (stderr, _("Total bytes deleted: %s\n"),
+                 STRINGIFY_BIGINT ((records_read - records_skipped)
+                                    * record_size
+                                   - (prev_written + bytes_written), buf));
+      }
+      break;
 
 
-         /* There is nothing else to read, break out.  */
-         break;
-       }
+    case EXTRACT_SUBCOMMAND:
+    case LIST_SUBCOMMAND:
+    case DIFF_SUBCOMMAND:
+      print_stats (stderr, _("Total bytes read"),
+                   records_read * record_size);
+      break;
 
 
-      status = write_archive_buffer ();
-      if (status != record_size)
-       archive_write_error (status);
+    default:
+      abort ();
     }
     }
-
-#if 0
-  close_archive ();
-#endif
-  exit (exit_status);
 }
 
 }
 
-/*---------------------------------------------------------.
-| Set ARCHIVE for uncompressing, then reading an archive.  |
-`---------------------------------------------------------*/
-
-static void
-child_open_for_uncompress (void)
+/* Compute and return the block ordinal at current_block.  */
+off_t
+current_block_ordinal (void)
 {
 {
-  int parent_pipe[2];
-  int child_pipe[2];
-  pid_t grandchild_pid;
-
-  xpipe (parent_pipe);
-  child_pid = xfork ();
+  return record_start_block + (current_block - record_start);
+}
 
 
-  if (child_pid > 0)
+/* If the EOF flag is set, reset it, as well as current_block, etc.  */
+void
+reset_eof (void)
+{
+  if (hit_eof)
     {
     {
-      /* The parent tar is still here!  Just clean up.  */
+      hit_eof = false;
+      current_block = record_start;
+      record_end = record_start + blocking_factor;
+      access_mode = ACCESS_WRITE;
+    }
+}
 
 
-      read_full_records_option = 1;
-      archive = parent_pipe[PREAD];
-      xclose (parent_pipe[PWRITE]);
-      return;
+/* Return the location of the next available input or output block.
+   Return zero for EOF.  Once we have returned zero, we just keep returning
+   it, to avoid accidentally going on to the next file on the tape.  */
+union block *
+find_next_block (void)
+{
+  if (current_block == record_end)
+    {
+      if (hit_eof)
+        return 0;
+      flush_archive ();
+      if (current_block == record_end)
+        {
+          hit_eof = true;
+          return 0;
+        }
     }
     }
+  return current_block;
+}
 
 
-  /* The new born child tar is here!  */
+/* Indicate that we have used all blocks up thru BLOCK. */
+void
+set_next_block_after (union block *block)
+{
+  while (block >= current_block)
+    current_block++;
 
 
-  program_name = _("tar (child)");
+  /* Do *not* flush the archive here.  If we do, the same argument to
+     set_next_block_after could mean the next block (if the input record
+     is exactly one block long), which is not what is intended.  */
 
 
-  xdup2 (parent_pipe[PWRITE], STDOUT_FILENO);
-  xclose (parent_pipe[PREAD]);
+  if (current_block > record_end)
+    abort ();
+}
 
 
-  /* Check if we need a grandchild tar.  This happens only if either:
-     a) we're reading stdin: to force unblocking;
-     b) the file is to be accessed by rmt: compressor doesn't know how;
-     c) the file is not a plain file.  */
+/* Return the number of bytes comprising the space between POINTER
+   through the end of the current buffer of blocks.  This space is
+   available for filling with data, or taking data from.  POINTER is
+   usually (but not always) the result of previous find_next_block call.  */
+size_t
+available_space_after (union block *pointer)
+{
+  return record_end->buffer - pointer->buffer;
+}
 
 
-  if (strcmp (archive_name_array[0], "-") != 0
-      && !_remdev (archive_name_array[0])
-      && is_regular_file (archive_name_array[0]))
-    {
-      /* We don't need a grandchild tar.  Open the archive and lauch the
-        uncompressor.  */
-
-      archive = open (archive_name_array[0], O_RDONLY | O_BINARY, MODE_RW);
-      if (archive < 0)
-       open_fatal (archive_name_array[0]);
-      xdup2 (archive, STDIN_FILENO);
-      execlp (use_compress_program_option, use_compress_program_option,
-             "-d", (char *) 0);
-      exec_fatal (use_compress_program_option);
-    }
+/* Close file having descriptor FD, and abort if close unsuccessful.  */
+void
+xclose (int fd)
+{
+  if (close (fd) != 0)
+    close_error (_("(pipe)"));
+}
 
 
-  /* We do need a grandchild tar.  */
+static void
+init_buffer (void)
+{
+  if (! record_buffer_aligned[record_index])
+    record_buffer_aligned[record_index] =
+      page_aligned_alloc (&record_buffer[record_index], record_size);
 
 
-  xpipe (child_pipe);
-  grandchild_pid = xfork ();
+  record_start = record_buffer_aligned[record_index];
+  current_block = record_start;
+  record_end = record_start + blocking_factor;
+}
 
 
-  if (grandchild_pid > 0)
-    {
-      /* The child tar is still here!  Launch the uncompressor.  */
+/* Open an archive file.  The argument specifies whether we are
+   reading or writing, or both.  */
+static void
+_open_archive (enum access_mode wanted_access)
+{
+  int backed_up_flag = 0;
 
 
-      xdup2 (child_pipe[PREAD], STDIN_FILENO);
-      xclose (child_pipe[PWRITE]);
-      execlp (use_compress_program_option, use_compress_program_option,
-             "-d", (char *) 0);
-      exec_fatal (use_compress_program_option);
-    }
+  if (record_size == 0)
+    FATAL_ERROR ((0, 0, _("Invalid value for record_size")));
 
 
-  /* The new born grandchild tar is here!  */
+  if (archive_names == 0)
+    FATAL_ERROR ((0, 0, _("No archive name given")));
 
 
-  program_name = _("tar (grandchild)");
+  tar_stat_destroy (&current_stat_info);
 
 
-  /* Prepare for unblocking the data from the archive into the uncompressor.  */
+  record_index = 0;
+  init_buffer ();
 
 
-  xdup2 (child_pipe[PWRITE], STDOUT_FILENO);
-  xclose (child_pipe[PREAD]);
+  /* When updating the archive, we start with reading.  */
+  access_mode = wanted_access == ACCESS_UPDATE ? ACCESS_READ : wanted_access;
 
 
-  if (strcmp (archive_name_array[0], "-") == 0)
-    archive = STDIN_FILENO;
-  else
-    archive = rmtopen (archive_name_array[0], O_RDONLY | O_BINARY,
-                      MODE_RW, rsh_command_option);
-  if (archive < 0)
-    open_fatal (archive_name_array[0]);
+  read_full_records = read_full_records_option;
 
 
-  /* Let's read the archive and pipe it into stdout.  */
+  records_read = 0;
 
 
-  while (1)
+  if (use_compress_program_option)
     {
     {
-      char *cursor;
-      size_t maximum;
-      size_t count;
-      ssize_t status;
-
-      read_error_count = 0;
-
-    error_loop:
-      status = rmtread (archive, record_start->buffer, record_size);
-      if (status < 0)
-       {
-         archive_read_error ();
-         goto error_loop;
-       }
-      if (status == 0)
-       break;
-      cursor = record_start->buffer;
-      maximum = status;
-      while (maximum)
-       {
-         count = maximum < BLOCKSIZE ? maximum : BLOCKSIZE;
-         status = full_write (STDOUT_FILENO, cursor, count);
-         if (status < 0)
-           write_error (use_compress_program_option);
-
-         if (status != count)
-           {
-             ERROR ((0, 0, _("Write to compression program short %lu bytes"),
-                     (unsigned long) (count - status)));
-             count = status;
-           }
-
-         cursor += count;
-         maximum -= count;
-       }
-    }
-
-#if 0
-  close_archive ();
-#endif
-  exit (exit_status);
-}
-
-#endif /* not MSDOS */
-
-/*--------------------------------------------------------------------------.
-| Check the LABEL block against the volume label, seen as a globbing       |
-| pattern.  Return true if the pattern matches.  In case of failure, retry  |
-| matching a volume sequence number before giving up in multi-volume mode.  |
-`--------------------------------------------------------------------------*/
-
-static int
-check_label_pattern (union block *label)
-{
-  char *string;
-  int result;
-
-  if (fnmatch (volume_label_option, label->header.name, 0) == 0)
-    return 1;
-
-  if (!multi_volume_option)
-    return 0;
-
-  string = xmalloc (strlen (volume_label_option)
-                   + sizeof VOLUME_LABEL_APPEND + 1);
-  strcpy (string, volume_label_option);
-  strcat (string, VOLUME_LABEL_APPEND);
-  result = fnmatch (string, label->header.name, 0) == 0;
-  free (string);
-  return result;
-}
-
-/*------------------------------------------------------------------------.
-| Open an archive file.  The argument specifies whether we are reading or |
-| writing, or both.                                                      |
-`------------------------------------------------------------------------*/
-
-void
-open_archive (enum access_mode wanted_access)
-{
-  int backed_up_flag = 0;
-
-  stdlis = to_stdout_option ? stderr : stdout;
-
-  if (record_size == 0)
-    FATAL_ERROR ((0, 0, _("Invalid value for record_size")));
-
-  if (archive_names == 0)
-    FATAL_ERROR ((0, 0, _("No archive name given")));
-
-  current_file_name = 0;
-  current_link_name = 0;
-
-  /* FIXME: According to POSIX.1, PATH_MAX may well not be a compile-time
-     constant, and the value from sysconf (_SC_PATH_MAX) may well not be any
-     size that is reasonable to allocate a buffer.  In the GNU system, there
-     is no fixed limit.  The only correct thing to do is to use dynamic
-     allocation.  (Roland McGrath)  */
-
-  if (!real_s_name)
-    real_s_name = xmalloc (PATH_MAX);
-  /* FIXME: real_s_name is never freed.  */
-
-  save_name = 0;
-
-  if (multi_volume_option)
-    {
-      if (verify_option)
-       FATAL_ERROR ((0, 0, _("Cannot verify multi-volume archives")));
-      record_start = valloc (record_size + (2 * BLOCKSIZE));
-      if (record_start)
-       record_start += 2;
-    }
-  else
-    record_start = valloc (record_size);
-  if (!record_start)
-    FATAL_ERROR ((0, 0, _("Cannot allocate memory for blocking factor %d"),
-                 blocking_factor));
-
-  current_block = record_start;
-  record_end = record_start + blocking_factor;
-  /* When updating the archive, we start with reading.  */
-  access_mode = wanted_access == ACCESS_UPDATE ? ACCESS_READ : wanted_access;
-
-  if (use_compress_program_option)
-    {
-      if (multi_volume_option)
-       FATAL_ERROR ((0, 0, _("Cannot use multi-volume compressed archives")));
-      if (verify_option)
-       FATAL_ERROR ((0, 0, _("Cannot verify compressed archives")));
-
       switch (wanted_access)
       switch (wanted_access)
-       {
-       case ACCESS_READ:
-         child_open_for_uncompress ();
-         break;
-
-       case ACCESS_WRITE:
-         child_open_for_compress ();
-         break;
-
-       case ACCESS_UPDATE:
-         FATAL_ERROR ((0, 0, _("Cannot update compressed archives")));
-         break;
-       }
-
-      if (wanted_access == ACCESS_WRITE
-         && strcmp (archive_name_array[0], "-") == 0)
-       stdlis = stderr;
+        {
+        case ACCESS_READ:
+          child_pid = sys_child_open_for_uncompress ();
+          read_full_records = true;
+          record_end = record_start; /* set up for 1st record = # 0 */
+          break;
+
+        case ACCESS_WRITE:
+          child_pid = sys_child_open_for_compress ();
+          break;
+
+        case ACCESS_UPDATE:
+          abort (); /* Should not happen */
+          break;
+        }
+
+      if (!index_file_name
+          && wanted_access == ACCESS_WRITE
+          && strcmp (archive_name_array[0], "-") == 0)
+        stdlis = stderr;
     }
   else if (strcmp (archive_name_array[0], "-") == 0)
     {
     }
   else if (strcmp (archive_name_array[0], "-") == 0)
     {
-      read_full_records_option = 1; /* could be a pipe, be safe */
+      read_full_records = true; /* could be a pipe, be safe */
       if (verify_option)
       if (verify_option)
-       FATAL_ERROR ((0, 0, _("Cannot verify stdin/stdout archive")));
+        FATAL_ERROR ((0, 0, _("Cannot verify stdin/stdout archive")));
 
       switch (wanted_access)
 
       switch (wanted_access)
-       {
-       case ACCESS_READ:
-         archive = STDIN_FILENO;
-         break;
-
-       case ACCESS_WRITE:
-         archive = STDOUT_FILENO;
-         stdlis = stderr;
-         break;
-
-       case ACCESS_UPDATE:
-         archive = STDIN_FILENO;
-         stdlis = stderr;
-         write_archive_to_stdout = 1;
-         break;
-       }
+        {
+        case ACCESS_READ:
+          {
+            bool shortfile;
+            enum compress_type type;
+
+            archive = STDIN_FILENO;
+
+            type = check_compressed_archive (&shortfile);
+            if (type != ct_tar && type != ct_none)
+              FATAL_ERROR ((0, 0,
+                            _("Archive is compressed. Use %s option"),
+                            compress_option (type)));
+            if (shortfile)
+              ERROR ((0, 0, _("This does not look like a tar archive")));
+          }
+          break;
+
+        case ACCESS_WRITE:
+          archive = STDOUT_FILENO;
+          if (!index_file_name)
+            stdlis = stderr;
+          break;
+
+        case ACCESS_UPDATE:
+          archive = STDIN_FILENO;
+          write_archive_to_stdout = true;
+          record_end = record_start; /* set up for 1st record = # 0 */
+          if (!index_file_name)
+            stdlis = stderr;
+          break;
+        }
     }
   else if (verify_option)
     archive = rmtopen (archive_name_array[0], O_RDWR | O_CREAT | O_BINARY,
     }
   else if (verify_option)
     archive = rmtopen (archive_name_array[0], O_RDWR | O_CREAT | O_BINARY,
-                      MODE_RW, rsh_command_option);
+                       MODE_RW, rsh_command_option);
   else
     switch (wanted_access)
       {
       case ACCESS_READ:
   else
     switch (wanted_access)
       {
       case ACCESS_READ:
-       archive = rmtopen (archive_name_array[0], O_RDONLY | O_BINARY,
-                          MODE_RW, rsh_command_option);
-       break;
+        archive = open_compressed_archive ();
+       if (archive >= 0)
+         guess_seekable_archive ();
+        break;
 
       case ACCESS_WRITE:
 
       case ACCESS_WRITE:
-       if (backup_option)
-         {
-           maybe_backup_file (archive_name_array[0], 1);
-           backed_up_flag = 1;
-         }
-       archive = rmtcreat (archive_name_array[0], MODE_RW,
-                           rsh_command_option);
-       break;
+        if (backup_option)
+          {
+            maybe_backup_file (archive_name_array[0], 1);
+            backed_up_flag = 1;
+          }
+        archive = rmtcreat (archive_name_array[0], MODE_RW,
+                            rsh_command_option);
+        break;
 
       case ACCESS_UPDATE:
 
       case ACCESS_UPDATE:
-       archive = rmtopen (archive_name_array[0], O_RDWR | O_CREAT | O_BINARY,
-                          MODE_RW, rsh_command_option);
-       break;
+        archive = rmtopen (archive_name_array[0],
+                           O_RDWR | O_CREAT | O_BINARY,
+                           MODE_RW, rsh_command_option);
+
+        switch (check_compressed_archive (NULL))
+          {
+          case ct_none:
+          case ct_tar:
+            break;
+
+          default:
+            FATAL_ERROR ((0, 0,
+                          _("Cannot update compressed archives")));
+          }
+        break;
       }
 
   if (archive < 0
       }
 
   if (archive < 0
-      || (! _isrmt (archive) && fstat (archive, &archive_stat) < 0))
+      || (! _isrmt (archive) && !sys_get_archive_stat ()))
     {
       int saved_errno = errno;
 
       if (backed_up_flag)
     {
       int saved_errno = errno;
 
       if (backed_up_flag)
-       undo_last_backup ();
+        undo_last_backup ();
       errno = saved_errno;
       open_fatal (archive_name_array[0]);
     }
 
       errno = saved_errno;
       open_fatal (archive_name_array[0]);
     }
 
-#if !MSDOS
-
-  /* Detect if outputting to "/dev/null".  */
-  {
-    static char const dev_null[] = "/dev/null";
-    struct stat dev_null_stat;
-
-    dev_null_output =
-      (strcmp (archive_name_array[0], dev_null) == 0
-       || (! _isrmt (archive)
-          && S_ISCHR (archive_stat.st_mode)
-          && stat (dev_null, &dev_null_stat) == 0
-          && S_ISCHR (dev_null_stat.st_mode)
-          && archive_stat.st_rdev == dev_null_stat.st_rdev));
-  }
-
-  if (!_isrmt (archive) && S_ISREG (archive_stat.st_mode))
-    {
-      ar_dev = archive_stat.st_dev;
-      ar_ino = archive_stat.st_ino;
-    }
-  else
-    ar_dev = 0;
-
-#endif /* not MSDOS */
-
-#if MSDOS
-  setmode (archive, O_BINARY);
-#endif
+  sys_detect_dev_null_output ();
+  sys_save_archive_dev_ino ();
+  SET_BINARY_MODE (archive);
 
   switch (wanted_access)
     {
     case ACCESS_READ:
 
   switch (wanted_access)
     {
     case ACCESS_READ:
-    case ACCESS_UPDATE:
-      record_end = record_start; /* set up for 1st record = # 0 */
-      find_next_block ();      /* read it in, check for EOF */
-
-      if (volume_label_option)
-       {
-         union block *label = find_next_block ();
-
-         if (!label)
-           FATAL_ERROR ((0, 0, _("Archive not labeled to match %s"),
-                         quote (volume_label_option)));
-         if (!check_label_pattern (label))
-           FATAL_ERROR ((0, 0, _("Volume %s does not match %s"),
-                         quote_n (0, label->header.name),
-                         quote_n (1, volume_label_option)));
-       }
+      find_next_block ();       /* read it in, check for EOF */
       break;
 
       break;
 
+    case ACCESS_UPDATE:
     case ACCESS_WRITE:
     case ACCESS_WRITE:
-      if (volume_label_option)
-       {
-         memset (record_start, 0, BLOCKSIZE);
-         if (multi_volume_option)
-           sprintf (record_start->header.name, "%s Volume 1",
-                    volume_label_option);
-         else
-           strcpy (record_start->header.name, volume_label_option);
-
-         assign_string (&current_file_name, record_start->header.name);
-
-         record_start->header.typeflag = GNUTYPE_VOLHDR;
-         TIME_TO_CHARS (start_time, record_start->header.mtime);
-         finish_header (record_start);
-#if 0
-         current_block++;
-#endif
-       }
+      records_written = 0;
       break;
     }
 }
 
       break;
     }
 }
 
-/*--------------------------------------.
-| Perform a write to flush the buffer.  |
-`--------------------------------------*/
-
-void
-flush_write (void)
+/* Perform a write to flush the buffer.  */
+static ssize_t
+_flush_write (void)
 {
 {
-  int copy_back;
   ssize_t status;
 
   ssize_t status;
 
-  if (checkpoint_option && !(++checkpoint % 10))
-    WARN ((0, 0, _("Write checkpoint %d"), checkpoint));
-
+  checkpoint_run (true);
   if (tape_length_option && tape_length_option <= bytes_written)
     {
       errno = ENOSPC;
   if (tape_length_option && tape_length_option <= bytes_written)
     {
       errno = ENOSPC;
@@ -889,143 +805,29 @@ flush_write (void)
   else if (dev_null_output)
     status = record_size;
   else
   else if (dev_null_output)
     status = record_size;
   else
-    status = write_archive_buffer ();
-  if (status != record_size && !multi_volume_option)
-    archive_write_error (status);
-
-  if (status > 0)
-    bytes_written += status;
-
-  if (status == record_size)
-    {
-      if (multi_volume_option)
-       {
-         char *cursor;
-
-         if (!save_name)
-           {
-             real_s_name[0] = '\0';
-             real_s_totsize = 0;
-             real_s_sizeleft = 0;
-             return;
-           }
-
-         cursor = save_name + FILESYSTEM_PREFIX_LEN (save_name);
-         while (*cursor == '/')
-           cursor++;
-
-         strcpy (real_s_name, cursor);
-         real_s_totsize = save_totsize;
-         real_s_sizeleft = save_sizeleft;
-       }
-      return;
-    }
-
-  /* We're multivol.  Panic if we didn't get the right kind of response.  */
-
-  /* ENXIO is for the UNIX PC.  */
-  if (status < 0 && errno != ENOSPC && errno != EIO && errno != ENXIO)
-    archive_write_error (status);
-
-  /* If error indicates a short write, we just move to the next tape.  */
-
-  if (!new_volume (ACCESS_WRITE))
-    return;
-
-  if (totals_option)
-    prev_written += bytes_written;
-  bytes_written = 0;
-
-  if (volume_label_option && real_s_name[0])
-    {
-      copy_back = 2;
-      record_start -= 2;
-    }
-  else if (volume_label_option || real_s_name[0])
-    {
-      copy_back = 1;
-      record_start--;
-    }
-  else
-    copy_back = 0;
-
-  if (volume_label_option)
-    {
-      memset (record_start, 0, BLOCKSIZE);
-      sprintf (record_start->header.name, "%s Volume %d",
-              volume_label_option, volno);
-      TIME_TO_CHARS (start_time, record_start->header.mtime);
-      record_start->header.typeflag = GNUTYPE_VOLHDR;
-      finish_header (record_start);
-    }
-
-  if (real_s_name[0])
-    {
-      int tmp;
-
-      if (volume_label_option)
-       record_start++;
-
-      memset (record_start, 0, BLOCKSIZE);
-
-      /* FIXME: Michael P Urban writes: [a long name file] is being written
-        when a new volume rolls around [...]  Looks like the wrong value is
-        being preserved in real_s_name, though.  */
+    status = sys_write_archive_buffer ();
 
 
-      strcpy (record_start->header.name, real_s_name);
-      record_start->header.typeflag = GNUTYPE_MULTIVOL;
-      OFF_TO_CHARS (real_s_sizeleft, record_start->header.size);
-      OFF_TO_CHARS (real_s_totsize - real_s_sizeleft, 
-                   record_start->oldgnu_header.offset);
-      tmp = verbose_option;
-      verbose_option = 0;
-      finish_header (record_start);
-      verbose_option = tmp;
-
-      if (volume_label_option)
-       record_start--;
-    }
-
-  status = write_archive_buffer ();
-  if (status != record_size)
-    archive_write_error (status);
-
-  bytes_written += status;
-
-  if (copy_back)
+  if (status && multi_volume_option && !inhibit_map)
     {
     {
-      record_start += copy_back;
-      memcpy (current_block,
-             record_start + blocking_factor - copy_back,
-             copy_back * BLOCKSIZE);
-      current_block += copy_back;
-
-      if (real_s_sizeleft >= copy_back * BLOCKSIZE)
-       real_s_sizeleft -= copy_back * BLOCKSIZE;
-      else if ((real_s_sizeleft + BLOCKSIZE - 1) / BLOCKSIZE <= copy_back)
-       real_s_name[0] = '\0';
-      else
+      struct bufmap *map = bufmap_locate (status);
+      if (map)
        {
        {
-         char *cursor = save_name + FILESYSTEM_PREFIX_LEN (save_name);
-
-         while (*cursor == '/')
-           cursor++;
-
-         strcpy (real_s_name, cursor);
-         real_s_sizeleft = save_sizeleft;
-         real_s_totsize = save_totsize;
+         size_t delta = status - map->start * BLOCKSIZE;
+         if (delta > map->sizeleft)
+           delta = map->sizeleft;
+         map->sizeleft -= delta;
+         if (map->sizeleft == 0)
+           map = map->next;
+         bufmap_reset (map, map ? (- map->start) : 0);
        }
        }
-      copy_back = 0;
     }
     }
+  return status;
 }
 
 }
 
-/*---------------------------------------------------------------------.
-| Handle write errors on the archive.  Write errors are always fatal.  |
-| Hitting the end of a volume does not cause a write error unless the  |
-| write was the first record of the volume.                           |
-`---------------------------------------------------------------------*/
-
-static void
+/* Handle write errors on the archive.  Write errors are always fatal.
+   Hitting the end of a volume does not cause a write error unless the
+   write was the first record of the volume.  */
+void
 archive_write_error (ssize_t status)
 {
   /* It might be useful to know how much was written before the error
 archive_write_error (ssize_t status)
 {
   /* It might be useful to know how much was written before the error
@@ -1033,19 +835,16 @@ archive_write_error (ssize_t status)
   if (totals_option)
     {
       int e = errno;
   if (totals_option)
     {
       int e = errno;
-      print_total_written ();
+      print_total_stats ();
       errno = e;
     }
 
   write_fatal_details (*archive_name_cursor, status, record_size);
 }
 
       errno = e;
     }
 
   write_fatal_details (*archive_name_cursor, status, record_size);
 }
 
-/*-------------------------------------------------------------------.
-| Handle read errors on the archive.  If the read should be retried, |
-| returns to the caller.                                            |
-`-------------------------------------------------------------------*/
-
-static void
+/* Handle read errors on the archive.  If the read should be retried,
+   return to the caller.  */
+void
 archive_read_error (void)
 {
   read_error (*archive_name_cursor);
 archive_read_error (void)
 {
   read_error (*archive_name_cursor);
@@ -1061,208 +860,75 @@ archive_read_error (void)
   return;
 }
 
   return;
 }
 
-/*-------------------------------------.
-| Perform a read to flush the buffer.  |
-`-------------------------------------*/
-
-void
-flush_read (void)
+static bool
+archive_is_dev (void)
 {
 {
-  ssize_t status;              /* result from system call */
-  size_t left;                 /* bytes left */
-  char *more;                  /* pointer to next byte to read */
-
-  if (checkpoint_option && !(++checkpoint % 10))
-    WARN ((0, 0, _("Read checkpoint %d"), checkpoint));
-
-  /* Clear the count of errors.  This only applies to a single call to
-     flush_read.  */
-
-  read_error_count = 0;                /* clear error count */
+  struct stat st;
 
 
-  if (write_archive_to_stdout && record_start_block != 0)
-    {
-      archive = STDOUT_FILENO;
-      status = write_archive_buffer ();
-      archive = STDIN_FILENO;
-      if (status != record_size)
-       archive_write_error (status);
-    }
-  if (multi_volume_option)
+  if (fstat (archive, &st))
     {
     {
-      if (save_name)
-       {
-         char *cursor = save_name + FILESYSTEM_PREFIX_LEN (save_name);
-
-         while (*cursor == '/')
-           cursor++;
-
-         strcpy (real_s_name, cursor);
-         real_s_sizeleft = save_sizeleft;
-         real_s_totsize = save_totsize;
-       }
-      else
-       {
-         real_s_name[0] = '\0';
-         real_s_totsize = 0;
-         real_s_sizeleft = 0;
-       }
+      stat_diag (*archive_name_cursor);
+      return false;
     }
     }
+  return S_ISBLK (st.st_mode) || S_ISCHR (st.st_mode);
+}
 
 
- error_loop:
-  status = rmtread (archive, record_start->buffer, record_size);
-  if (status == record_size)
-    return;
-
-  if ((status == 0
-       || (status < 0 && errno == ENOSPC)
-       || (status > 0 && !read_full_records_option))
-      && multi_volume_option)
-    {
-      union block *cursor;
-
-    try_volume:
-      switch (subcommand_option)
-       {
-       case APPEND_SUBCOMMAND:
-       case CAT_SUBCOMMAND:
-       case UPDATE_SUBCOMMAND:
-         if (!new_volume (ACCESS_UPDATE))
-           return;
-         break;
-
-       default:
-         if (!new_volume (ACCESS_READ))
-           return;
-         break;
-       }
-
-    vol_error:
-      status = rmtread (archive, record_start->buffer, record_size);
-      if (status < 0)
-       {
-         archive_read_error ();
-         goto vol_error;
-       }
-      if (status != record_size)
-       goto short_read;
-
-      cursor = record_start;
+static void
+short_read (size_t status)
+{
+  size_t left;                  /* bytes left */
+  char *more;                   /* pointer to next byte to read */
 
 
-      if (cursor->header.typeflag == GNUTYPE_VOLHDR)
-       {
-         if (volume_label_option)
-           {
-             if (!check_label_pattern (cursor))
-               {
-                 WARN ((0, 0, _("Volume %s does not match %s"),
-                        quote_n (0, cursor->header.name),
-                        quote_n (1, volume_label_option)));
-                 volno--;
-                 global_volno--;
-                 goto try_volume;
-               }
-           }
-         if (verbose_option)
-           fprintf (stdlis, _("Reading %s\n"), quote (cursor->header.name));
-         cursor++;
-       }
-      else if (volume_label_option)
-       WARN ((0, 0, _("WARNING: No volume header")));
+  more = record_start->buffer + status;
+  left = record_size - status;
 
 
-      if (real_s_name[0])
-       {
-         uintmax_t s1, s2;
-         if (cursor->header.typeflag != GNUTYPE_MULTIVOL
-             || strcmp (cursor->header.name, real_s_name))
-           {
-             WARN ((0, 0, _("%s is not continued on this volume"),
-                    quote (real_s_name)));
-             volno--;
-             global_volno--;
-             goto try_volume;
-           }
-         s1 = UINTMAX_FROM_HEADER (cursor->header.size);
-         s2 = UINTMAX_FROM_HEADER (cursor->oldgnu_header.offset);
-         if (real_s_totsize != s1 + s2 || s1 + s2 < s2)
-           {
-             char totsizebuf[UINTMAX_STRSIZE_BOUND];
-             char s1buf[UINTMAX_STRSIZE_BOUND];
-             char s2buf[UINTMAX_STRSIZE_BOUND];
-             
-             WARN ((0, 0, _("%s is the wrong size (%s != %s + %s)"),
-                    quote (cursor->header.name),
-                    STRINGIFY_BIGINT (save_totsize, totsizebuf),
-                    STRINGIFY_BIGINT (s1, s1buf),
-                    STRINGIFY_BIGINT (s2, s2buf)));
-             volno--;
-             global_volno--;
-             goto try_volume;
-           }
-         if (real_s_totsize - real_s_sizeleft
-             != OFF_FROM_HEADER (cursor->oldgnu_header.offset))
-           {
-             WARN ((0, 0, _("This volume is out of sequence")));
-             volno--;
-             global_volno--;
-             goto try_volume;
-           }
-         cursor++;
-       }
-      current_block = cursor;
-      return;
-    }
-  else if (status < 0)
+  if (left && left % BLOCKSIZE == 0
+      && verbose_option
+      && record_start_block == 0 && status != 0
+      && archive_is_dev ())
     {
     {
-      archive_read_error ();
-      goto error_loop;         /* try again */
+      unsigned long rsize = status / BLOCKSIZE;
+      WARN ((0, 0,
+             ngettext ("Record size = %lu block",
+                       "Record size = %lu blocks",
+                       rsize),
+             rsize));
     }
 
     }
 
- short_read:
-  more = record_start->buffer + status;
-  left = record_size - status;
-
-  while (left % BLOCKSIZE != 0)
+  while (left % BLOCKSIZE != 0
+         || (left && status && read_full_records))
     {
       if (status)
     {
       if (status)
-       while ((status = rmtread (archive, more, left)) < 0)
-         archive_read_error ();
+        while ((status = rmtread (archive, more, left)) == SAFE_READ_ERROR)
+          archive_read_error ();
 
       if (status == 0)
 
       if (status == 0)
-       {
-         ERROR ((0, 0, _("%d garbage bytes ignored at end of archive"),
-                 (int) ((record_size - left) % BLOCKSIZE)));
-         break;
-       }
+        break;
+
+      if (! read_full_records)
+        {
+          unsigned long rest = record_size - left;
 
 
-      if (! read_full_records_option)
-       FATAL_ERROR ((0, 0, _("Unaligned block (%lu bytes) in archive"),
-                     (unsigned long) (record_size - left)));
-         
-      /* User warned us about this.  Fix up.  */
+          FATAL_ERROR ((0, 0,
+                        ngettext ("Unaligned block (%lu byte) in archive",
+                                  "Unaligned block (%lu bytes) in archive",
+                                  rest),
+                        rest));
+        }
 
       left -= status;
       more += status;
     }
 
 
       left -= status;
       more += status;
     }
 
-  /* FIXME: for size=0, multi-volume support.  On the first record, warn
-     about the problem.  */
-
-  if (!read_full_records_option && verbose_option
-      && record_start_block == 0 && status > 0)
-    WARN ((0, 0, _("Record size = %lu blocks"),
-          (unsigned long) ((record_size - left) / BLOCKSIZE)));
-
   record_end = record_start + (record_size - left) / BLOCKSIZE;
   record_end = record_start + (record_size - left) / BLOCKSIZE;
+  records_read++;
 }
 
 }
 
-/*-----------------------------------------------.
-| Flush the current buffer to/from the archive.         |
-`-----------------------------------------------*/
-
+/*  Flush the current buffer to/from the archive.  */
 void
 flush_archive (void)
 {
 void
 flush_archive (void)
 {
+  size_t buffer_level = current_block->buffer - record_start->buffer;
   record_start_block += record_end - record_start;
   current_block = record_start;
   record_end = record_start + blocking_factor;
   record_start_block += record_end - record_start;
   current_block = record_start;
   record_end = record_start + blocking_factor;
@@ -1270,17 +936,8 @@ flush_archive (void)
   if (access_mode == ACCESS_READ && time_to_start_writing)
     {
       access_mode = ACCESS_WRITE;
   if (access_mode == ACCESS_READ && time_to_start_writing)
     {
       access_mode = ACCESS_WRITE;
-      time_to_start_writing = 0;
-
-      if (file_to_switch_to >= 0)
-       {
-         if (rmtclose (archive) != 0)
-           close_warn (*archive_name_cursor);
-
-         archive = file_to_switch_to;
-       }
-      else
-       backspace_output ();
+      time_to_start_writing = false;
+      backspace_output ();
     }
 
   switch (access_mode)
     }
 
   switch (access_mode)
@@ -1290,7 +947,7 @@ flush_archive (void)
       break;
 
     case ACCESS_WRITE:
       break;
 
     case ACCESS_WRITE:
-      flush_write ();
+      flush_write_ptr (buffer_level);
       break;
 
     case ACCESS_UPDATE:
       break;
 
     case ACCESS_UPDATE:
@@ -1298,12 +955,9 @@ flush_archive (void)
     }
 }
 
     }
 }
 
-/*-------------------------------------------------------------------------.
-| Backspace the archive descriptor by one record worth.  If its a tape,           |
-| MTIOCTOP will work.  If its something else, we try to seek on it.  If we |
-| can't seek, we lose!                                                    |
-`-------------------------------------------------------------------------*/
-
+/* Backspace the archive descriptor by one record worth.  If it's a
+   tape, MTIOCTOP will work.  If it's something else, try to seek on
+   it.  If we can't seek, we lose!  */
 static void
 backspace_output (void)
 {
 static void
 backspace_output (void)
 {
@@ -1326,110 +980,87 @@ backspace_output (void)
     /* Seek back to the beginning of this record and start writing there.  */
 
     position -= record_size;
     /* Seek back to the beginning of this record and start writing there.  */
 
     position -= record_size;
+    if (position < 0)
+      position = 0;
     if (rmtlseek (archive, position, SEEK_SET) != position)
       {
     if (rmtlseek (archive, position, SEEK_SET) != position)
       {
-       /* Lseek failed.  Try a different method.  */
+        /* Lseek failed.  Try a different method.  */
 
 
-       WARN ((0, 0,
-              _("Cannot backspace archive file; it may be unreadable without -i")));
+        WARN ((0, 0,
+               _("Cannot backspace archive file; it may be unreadable without -i")));
 
 
-       /* Replace the first part of the record with NULs.  */
+        /* Replace the first part of the record with NULs.  */
 
 
-       if (record_start->buffer != output_start)
-         memset (record_start->buffer, 0,
-                 output_start - record_start->buffer);
+        if (record_start->buffer != output_start)
+          memset (record_start->buffer, 0,
+                  output_start - record_start->buffer);
       }
   }
 }
 
       }
   }
 }
 
-/*-------------------------.
-| Close the archive file.  |
-`-------------------------*/
-
-void
-close_archive (void)
+off_t
+seek_archive (off_t size)
 {
 {
-  if (time_to_start_writing || access_mode == ACCESS_WRITE)
-    flush_archive ();
+  off_t start = current_block_ordinal ();
+  off_t offset;
+  off_t nrec, nblk;
+  off_t skipped = (blocking_factor - (current_block - record_start))
+                  * BLOCKSIZE;
+
+  if (size <= skipped)
+    return 0;
 
 
-#if !MSDOS
+  /* Compute number of records to skip */
+  nrec = (size - skipped) / record_size;
+  if (nrec == 0)
+    return 0;
+  offset = rmtlseek (archive, nrec * record_size, SEEK_CUR);
+  if (offset < 0)
+    return offset;
 
 
-  /* Manage to fully drain a pipe we might be reading, so to not break it on
-     the producer after the EOF block.  FIXME: one of these days, GNU tar
-     might become clever enough to just stop working, once there is no more
-     work to do, we might have to revise this area in such time.  */
+  if (offset % record_size)
+    FATAL_ERROR ((0, 0, _("rmtlseek not stopped at a record boundary")));
 
 
-  if (access_mode == ACCESS_READ
-      && ! _isrmt (archive)
-      && S_ISFIFO (archive_stat.st_mode))
-    while (rmtread (archive, record_start->buffer, record_size) > 0)
-      continue;
-#endif
+  /* Convert to number of records */
+  offset /= BLOCKSIZE;
+  /* Compute number of skipped blocks */
+  nblk = offset - start;
+
+  /* Update buffering info */
+  records_read += nblk / blocking_factor;
+  record_start_block = offset - blocking_factor;
+  current_block = record_end;
+
+  return nblk;
+}
 
 
-  if (! _isrmt (archive) && subcommand_option == DELETE_SUBCOMMAND)
+/* Close the archive file.  */
+void
+close_archive (void)
+{
+  if (time_to_start_writing || access_mode == ACCESS_WRITE)
     {
     {
-#if MSDOS
-      int status = write (archive, "", 0);
-#else
-      off_t pos = lseek (archive, (off_t) 0, SEEK_CUR);
-      int status = pos < 0 ? -1 : ftruncate (archive, pos);
-#endif
-      if (status != 0)
-       truncate_warn (*archive_name_cursor);
+      flush_archive ();
+      if (current_block > record_start)
+        flush_archive ();
     }
     }
+
+  compute_duration ();
   if (verify_option)
     verify_volume ();
 
   if (rmtclose (archive) != 0)
   if (verify_option)
     verify_volume ();
 
   if (rmtclose (archive) != 0)
-    close_warn (*archive_name_cursor);
+    close_error (*archive_name_cursor);
 
 
-#if !MSDOS
+  sys_wait_for_child (child_pid, hit_eof);
 
 
-  if (child_pid)
-    {
-      int wait_status;
-
-      while (waitpid (child_pid, &wait_status, 0) == -1)
-       if (errno != EINTR)
-         {
-           waitpid_error (use_compress_program_option);
-           break;
-         }
-
-      if (WIFSIGNALED (wait_status))
-       {
-         /* SIGPIPE is OK, everything else is a problem.  */
-         
-         if (WTERMSIG (wait_status) != SIGPIPE)
-           ERROR ((0, 0, _("Child died with signal %d"),
-                   WTERMSIG (wait_status)));
-       }
-      else
-       {
-         /* Child voluntarily terminated -- but why?  /bin/sh returns
-            SIGPIPE + 128 if its child, then do nothing.  */
-             
-         if (WEXITSTATUS (wait_status)
-             && WEXITSTATUS (wait_status) != (SIGPIPE + 128))
-           ERROR ((0, 0, _("Child returned status %d"),
-                   WEXITSTATUS (wait_status)));
-       }
-    }
-#endif /* !MSDOS */
-
-  if (current_file_name)
-    free (current_file_name);
-  if (current_link_name)
-    free (current_link_name);
-  if (save_name)
-    free (save_name);
-  free (multi_volume_option ? record_start - 2 : record_start);
-}
-
-/*------------------------------------------------.
-| Called to initialize the global volume number.  |
-`------------------------------------------------*/
+  tar_stat_destroy (&current_stat_info);
+  free (record_buffer[0]);
+  free (record_buffer[1]);
+  bufmap_free (NULL);
+}
 
 
+/* Called to initialize the global volume number.  */
 void
 init_volume_number (void)
 {
 void
 init_volume_number (void)
 {
@@ -1437,20 +1068,20 @@ init_volume_number (void)
 
   if (file)
     {
 
   if (file)
     {
-      fscanf (file, "%d", &global_volno);
+      if (fscanf (file, "%d", &global_volno) != 1
+          || global_volno < 0)
+        FATAL_ERROR ((0, 0, _("%s: contains invalid volume number"),
+                      quotearg_colon (volno_file_option)));
       if (ferror (file))
       if (ferror (file))
-       read_error (volno_file_option);
+        read_error (volno_file_option);
       if (fclose (file) != 0)
       if (fclose (file) != 0)
-       close_error (volno_file_option);
+        close_error (volno_file_option);
     }
   else if (errno != ENOENT)
     open_error (volno_file_option);
 }
 
     }
   else if (errno != ENOENT)
     open_error (volno_file_option);
 }
 
-/*-------------------------------------------------------.
-| Called to write out the closing global volume number.         |
-`-------------------------------------------------------*/
-
+/* Called to write out the closing global volume number.  */
 void
 closeout_volume_number (void)
 {
 void
 closeout_volume_number (void)
 {
@@ -1460,194 +1091,874 @@ closeout_volume_number (void)
     {
       fprintf (file, "%d\n", global_volno);
       if (ferror (file))
     {
       fprintf (file, "%d\n", global_volno);
       if (ferror (file))
-       write_error (volno_file_option);
+        write_error (volno_file_option);
       if (fclose (file) != 0)
       if (fclose (file) != 0)
-       close_error (volno_file_option);
+        close_error (volno_file_option);
     }
   else
     open_error (volno_file_option);
 }
 
     }
   else
     open_error (volno_file_option);
 }
 
-/*-----------------------------------------------------------------------.
-| We've hit the end of the old volume.  Close it and open the next one.         |
-| Return nonzero on success.                                            |
-`-----------------------------------------------------------------------*/
+\f
+static void
+increase_volume_number (void)
+{
+  global_volno++;
+  if (global_volno < 0)
+    FATAL_ERROR ((0, 0, _("Volume number overflow")));
+  volno++;
+}
 
 
-static int
-new_volume (enum access_mode access)
+static void
+change_tape_menu (FILE *read_file)
+{
+  char *input_buffer = NULL;
+  size_t size = 0;
+  bool stop = false;
+
+  while (!stop)
+    {
+      fputc ('\007', stderr);
+      fprintf (stderr,
+               _("Prepare volume #%d for %s and hit return: "),
+               global_volno + 1, quote (*archive_name_cursor));
+      fflush (stderr);
+
+      if (getline (&input_buffer, &size, read_file) <= 0)
+        {
+          WARN ((0, 0, _("EOF where user reply was expected")));
+
+          if (subcommand_option != EXTRACT_SUBCOMMAND
+              && subcommand_option != LIST_SUBCOMMAND
+              && subcommand_option != DIFF_SUBCOMMAND)
+            WARN ((0, 0, _("WARNING: Archive is incomplete")));
+
+          fatal_exit ();
+        }
+
+      if (input_buffer[0] == '\n'
+          || input_buffer[0] == 'y'
+          || input_buffer[0] == 'Y')
+        break;
+
+      switch (input_buffer[0])
+        {
+        case '?':
+          {
+            fprintf (stderr, _("\
+ n name        Give a new file name for the next (and subsequent) volume(s)\n\
+ q             Abort tar\n\
+ y or newline  Continue operation\n"));
+            if (!restrict_option)
+              fprintf (stderr, _(" !             Spawn a subshell\n"));
+            fprintf (stderr, _(" ?             Print this list\n"));
+          }
+          break;
+
+        case 'q':
+          /* Quit.  */
+
+          WARN ((0, 0, _("No new volume; exiting.\n")));
+
+          if (subcommand_option != EXTRACT_SUBCOMMAND
+              && subcommand_option != LIST_SUBCOMMAND
+              && subcommand_option != DIFF_SUBCOMMAND)
+            WARN ((0, 0, _("WARNING: Archive is incomplete")));
+
+          fatal_exit ();
+
+        case 'n':
+          /* Get new file name.  */
+
+          {
+            char *name;
+            char *cursor;
+
+            for (name = input_buffer + 1;
+                 *name == ' ' || *name == '\t';
+                 name++)
+              ;
+
+            for (cursor = name; *cursor && *cursor != '\n'; cursor++)
+              ;
+            *cursor = '\0';
+
+            if (name[0])
+              {
+                /* FIXME: the following allocation is never reclaimed.  */
+                *archive_name_cursor = xstrdup (name);
+                stop = true;
+              }
+            else
+              fprintf (stderr, "%s",
+                       _("File name not specified. Try again.\n"));
+          }
+          break;
+
+        case '!':
+          if (!restrict_option)
+            {
+              sys_spawn_shell ();
+              break;
+            }
+          /* FALL THROUGH */
+
+        default:
+          fprintf (stderr, _("Invalid input. Type ? for help.\n"));
+        }
+    }
+  free (input_buffer);
+}
+
+/* We've hit the end of the old volume.  Close it and open the next one.
+   Return nonzero on success.
+*/
+static bool
+new_volume (enum access_mode mode)
 {
   static FILE *read_file;
   static int looped;
 {
   static FILE *read_file;
   static int looped;
+  int prompt;
 
   if (!read_file && !info_script_option)
     /* FIXME: if fopen is used, it will never be closed.  */
     read_file = archive == STDIN_FILENO ? fopen (TTY_NAME, "r") : stdin;
 
   if (now_verifying)
 
   if (!read_file && !info_script_option)
     /* FIXME: if fopen is used, it will never be closed.  */
     read_file = archive == STDIN_FILENO ? fopen (TTY_NAME, "r") : stdin;
 
   if (now_verifying)
-    return 0;
+    return false;
   if (verify_option)
     verify_volume ();
 
   if (verify_option)
     verify_volume ();
 
+  assign_string (&volume_label, NULL);
+  assign_string (&continued_file_name, NULL);
+  continued_file_size = continued_file_offset = 0;
+  current_block = record_start;
+
   if (rmtclose (archive) != 0)
   if (rmtclose (archive) != 0)
-    close_warn (*archive_name_cursor);
+    close_error (*archive_name_cursor);
 
 
-  global_volno++;
-  volno++;
   archive_name_cursor++;
   if (archive_name_cursor == archive_name_array + archive_names)
     {
       archive_name_cursor = archive_name_array;
       looped = 1;
     }
   archive_name_cursor++;
   if (archive_name_cursor == archive_name_array + archive_names)
     {
       archive_name_cursor = archive_name_array;
       looped = 1;
     }
+  prompt = looped;
 
  tryagain:
 
  tryagain:
-  if (looped)
+  if (prompt)
     {
       /* We have to prompt from now on.  */
 
       if (info_script_option)
     {
       /* We have to prompt from now on.  */
 
       if (info_script_option)
-       {
-         if (volno_file_option)
-           closeout_volume_number ();
-         system (info_script_option);
-       }
+        {
+          if (volno_file_option)
+            closeout_volume_number ();
+          if (sys_exec_info_script (archive_name_cursor, global_volno+1))
+            FATAL_ERROR ((0, 0, _("%s command failed"),
+                          quote (info_script_option)));
+        }
       else
       else
-       while (1)
-         {
-           char input_buffer[80];
-
-           fputc ('\007', stderr);
-           fprintf (stderr,
-                    _("Prepare volume #%d for %s and hit return: "),
-                    global_volno, quote (*archive_name_cursor));
-           fflush (stderr);
-
-           if (fgets (input_buffer, sizeof input_buffer, read_file) == 0)
-             {
-               WARN ((0, 0, _("EOF where user reply was expected")));
-
-               if (subcommand_option != EXTRACT_SUBCOMMAND
-                   && subcommand_option != LIST_SUBCOMMAND
-                   && subcommand_option != DIFF_SUBCOMMAND)
-                 WARN ((0, 0, _("WARNING: Archive is incomplete")));
-
-               fatal_exit ();
-             }
-           if (input_buffer[0] == '\n'
-               || input_buffer[0] == 'y'
-               || input_buffer[0] == 'Y')
-             break;
-
-           switch (input_buffer[0])
-             {
-             case '?':
-               {
-                 fprintf (stderr, _("\
- n [name]   Give a new file name for the next (and subsequent) volume(s)\n\
- q          Abort tar\n\
- !          Spawn a subshell\n\
- ?          Print this list\n"));
-               }
-               break;
-
-             case 'q':
-               /* Quit.  */
-
-               WARN ((0, 0, _("No new volume; exiting.\n")));
-
-               if (subcommand_option != EXTRACT_SUBCOMMAND
-                   && subcommand_option != LIST_SUBCOMMAND
-                   && subcommand_option != DIFF_SUBCOMMAND)
-                 WARN ((0, 0, _("WARNING: Archive is incomplete")));
-
-               fatal_exit ();
-
-             case 'n':
-               /* Get new file name.  */
-
-               {
-                 char *name = &input_buffer[1];
-                 char *cursor;
-
-                 while (*name == ' ' || *name == '\t')
-                   name++;
-                 cursor = name;
-                 while (*cursor && *cursor != '\n')
-                   cursor++;
-                 *cursor = '\0';
-
-                 /* FIXME: the following allocation is never reclaimed.  */
-                 *archive_name_cursor = xstrdup (name);
-               }
-               break;
-
-             case '!':
-#if MSDOS
-               spawnl (P_WAIT, getenv ("COMSPEC"), "-", 0);
-#else /* not MSDOS */
-               {
-                 pid_t child;
-                 const char *shell = getenv ("SHELL");
-                 if (! shell)
-                   shell = "/bin/sh";
-                 child = xfork ();
-                 if (child == 0)
-                   {
-                     execlp (shell, "-sh", "-i", 0);
-                     exec_fatal (shell);
-                   }
-                 else
-                   {
-                     int wait_status;
-                     while (waitpid (child, &wait_status, 0) == -1)
-                       if (errno != EINTR)
-                         {
-                           waitpid_error (shell);
-                           break;
-                         }
-                   }
-               }
-#endif /* not MSDOS */
-               break;
-             }
-         }
+        change_tape_menu (read_file);
     }
 
     }
 
-  if (verify_option)
+  if (strcmp (archive_name_cursor[0], "-") == 0)
+    {
+      read_full_records = true;
+      archive = STDIN_FILENO;
+    }
+  else if (verify_option)
     archive = rmtopen (*archive_name_cursor, O_RDWR | O_CREAT, MODE_RW,
     archive = rmtopen (*archive_name_cursor, O_RDWR | O_CREAT, MODE_RW,
-                      rsh_command_option);
+                       rsh_command_option);
   else
   else
-    switch (access)
+    switch (mode)
       {
       case ACCESS_READ:
       {
       case ACCESS_READ:
-       archive = rmtopen (*archive_name_cursor, O_RDONLY, MODE_RW,
-                          rsh_command_option);
-       break;
+        archive = rmtopen (*archive_name_cursor, O_RDONLY, MODE_RW,
+                           rsh_command_option);
+       guess_seekable_archive ();
+        break;
 
       case ACCESS_WRITE:
 
       case ACCESS_WRITE:
-       if (backup_option)
-         maybe_backup_file (*archive_name_cursor, 1);
-       archive = rmtcreat (*archive_name_cursor, MODE_RW,
-                           rsh_command_option);
-       break;
+        if (backup_option)
+          maybe_backup_file (*archive_name_cursor, 1);
+        archive = rmtcreat (*archive_name_cursor, MODE_RW,
+                            rsh_command_option);
+        break;
 
       case ACCESS_UPDATE:
 
       case ACCESS_UPDATE:
-       archive = rmtopen (*archive_name_cursor, O_RDWR | O_CREAT, MODE_RW,
-                          rsh_command_option);
-       break;
+        archive = rmtopen (*archive_name_cursor, O_RDWR | O_CREAT, MODE_RW,
+                           rsh_command_option);
+        break;
       }
 
   if (archive < 0)
     {
       open_warn (*archive_name_cursor);
       }
 
   if (archive < 0)
     {
       open_warn (*archive_name_cursor);
-      if (!verify_option && access == ACCESS_WRITE && backup_option)
-       undo_last_backup ();
+      if (!verify_option && mode == ACCESS_WRITE && backup_option)
+        undo_last_backup ();
+      prompt = 1;
       goto tryagain;
     }
 
       goto tryagain;
     }
 
-#if MSDOS
-  setmode (archive, O_BINARY);
-#endif
+  SET_BINARY_MODE (archive);
+
+  return true;
+}
+
+static bool
+read_header0 (struct tar_stat_info *info)
+{
+  enum read_header rc;
+
+  tar_stat_init (info);
+  rc = read_header (&current_header, info, read_header_auto);
+  if (rc == HEADER_SUCCESS)
+    {
+      set_next_block_after (current_header);
+      return true;
+    }
+  ERROR ((0, 0, _("This does not look like a tar archive")));
+  return false;
+}
+
+static bool
+try_new_volume (void)
+{
+  size_t status;
+  union block *header;
+  enum access_mode acc;
+
+  switch (subcommand_option)
+    {
+    case APPEND_SUBCOMMAND:
+    case CAT_SUBCOMMAND:
+    case UPDATE_SUBCOMMAND:
+      acc = ACCESS_UPDATE;
+      break;
+
+    default:
+      acc = ACCESS_READ;
+      break;
+    }
+
+  if (!new_volume (acc))
+    return true;
+
+  while ((status = rmtread (archive, record_start->buffer, record_size))
+         == SAFE_READ_ERROR)
+    archive_read_error ();
+
+  if (status != record_size)
+    short_read (status);
+
+  header = find_next_block ();
+  if (!header)
+    return false;
+
+  switch (header->header.typeflag)
+    {
+    case XGLTYPE:
+      {
+       tar_stat_init (&dummy);
+       if (read_header (&header, &dummy, read_header_x_global)
+           != HEADER_SUCCESS_EXTENDED)
+         {
+           ERROR ((0, 0, _("This does not look like a tar archive")));
+           return false;
+         }
+
+        xheader_decode (&dummy); /* decodes values from the global header */
+        tar_stat_destroy (&dummy);
+
+       /* The initial global header must be immediately followed by
+          an extended PAX header for the first member in this volume.
+          However, in some cases tar may split volumes in the middle
+          of a PAX header. This is incorrect, and should be fixed
+           in the future versions. In the meantime we must be
+          prepared to correctly list and extract such archives.
+
+          If this happens, the following call to read_header returns
+          HEADER_FAILURE, which is ignored.
+
+          See also tests/multiv07.at */
+
+       switch (read_header (&header, &dummy, read_header_auto))
+         {
+         case HEADER_SUCCESS:
+           set_next_block_after (header);
+           break;
+
+         case HEADER_FAILURE:
+           break;
+
+         default:
+           ERROR ((0, 0, _("This does not look like a tar archive")));
+           return false;
+         }
+        break;
+      }
+
+    case GNUTYPE_VOLHDR:
+      if (!read_header0 (&dummy))
+        return false;
+      tar_stat_destroy (&dummy);
+      assign_string (&volume_label, current_header->header.name);
+      set_next_block_after (header);
+      header = find_next_block ();
+      if (header->header.typeflag != GNUTYPE_MULTIVOL)
+        break;
+      /* FALL THROUGH */
+
+    case GNUTYPE_MULTIVOL:
+      if (!read_header0 (&dummy))
+        return false;
+      tar_stat_destroy (&dummy);
+      assign_string (&continued_file_name, current_header->header.name);
+      continued_file_size =
+        UINTMAX_FROM_HEADER (current_header->header.size);
+      continued_file_offset =
+        UINTMAX_FROM_HEADER (current_header->oldgnu_header.offset);
+      break;
+
+    default:
+      break;
+    }
+
+  if (bufmap_head)
+    {
+      uintmax_t s;
+      if (!continued_file_name
+          || strcmp (continued_file_name, bufmap_head->file_name))
+        {
+          if ((archive_format == GNU_FORMAT || archive_format == OLDGNU_FORMAT)
+              && strlen (bufmap_head->file_name) >= NAME_FIELD_SIZE
+              && strncmp (continued_file_name, bufmap_head->file_name,
+                          NAME_FIELD_SIZE) == 0)
+            WARN ((0, 0,
+ _("%s is possibly continued on this volume: header contains truncated name"),
+                   quote (bufmap_head->file_name)));
+          else
+            {
+              WARN ((0, 0, _("%s is not continued on this volume"),
+                     quote (bufmap_head->file_name)));
+              return false;
+            }
+        }
+
+      s = continued_file_size + continued_file_offset;
+
+      if (bufmap_head->sizetotal != s || s < continued_file_offset)
+        {
+          char totsizebuf[UINTMAX_STRSIZE_BOUND];
+          char s1buf[UINTMAX_STRSIZE_BOUND];
+          char s2buf[UINTMAX_STRSIZE_BOUND];
+
+          WARN ((0, 0, _("%s is the wrong size (%s != %s + %s)"),
+                 quote (continued_file_name),
+                 STRINGIFY_BIGINT (bufmap_head->sizetotal, totsizebuf),
+                 STRINGIFY_BIGINT (continued_file_size, s1buf),
+                 STRINGIFY_BIGINT (continued_file_offset, s2buf)));
+          return false;
+        }
+
+      if (bufmap_head->sizetotal - bufmap_head->sizeleft !=
+         continued_file_offset)
+        {
+          char totsizebuf[UINTMAX_STRSIZE_BOUND];
+          char s1buf[UINTMAX_STRSIZE_BOUND];
+          char s2buf[UINTMAX_STRSIZE_BOUND];
+
+          WARN ((0, 0, _("This volume is out of sequence (%s - %s != %s)"),
+                 STRINGIFY_BIGINT (bufmap_head->sizetotal, totsizebuf),
+                 STRINGIFY_BIGINT (bufmap_head->sizeleft, s1buf),
+                 STRINGIFY_BIGINT (continued_file_offset, s2buf)));
+
+          return false;
+        }
+    }
+
+  increase_volume_number ();
+  return true;
+}
+
+\f
+#define VOLUME_TEXT " Volume "
+#define VOLUME_TEXT_LEN (sizeof VOLUME_TEXT - 1)
+
+char *
+drop_volume_label_suffix (const char *label)
+{
+  const char *p;
+  size_t len = strlen (label);
+
+  if (len < 1)
+    return NULL;
+
+  for (p = label + len - 1; p > label && isdigit ((unsigned char) *p); p--)
+    ;
+  if (p > label && p - (VOLUME_TEXT_LEN - 1) > label)
+    {
+      p -= VOLUME_TEXT_LEN - 1;
+      if (memcmp (p, VOLUME_TEXT, VOLUME_TEXT_LEN) == 0)
+       {
+         char *s = xmalloc ((len = p - label) + 1);
+         memcpy (s, label, len);
+         s[len] = 0;
+         return s;
+       }
+    }
+
+  return NULL;
+}
+
+/* Check LABEL against the volume label, seen as a globbing
+   pattern.  Return true if the pattern matches.  In case of failure,
+   retry matching a volume sequence number before giving up in
+   multi-volume mode.  */
+static bool
+check_label_pattern (const char *label)
+{
+  char *string;
+  bool result = false;
+
+  if (fnmatch (volume_label_option, label, 0) == 0)
+    return true;
+
+  if (!multi_volume_option)
+    return false;
+
+  string = drop_volume_label_suffix (label);
+  if (string)
+    {
+      result = fnmatch (string, volume_label_option, 0) == 0;
+      free (string);
+    }
+  return result;
+}
+
+/* Check if the next block contains a volume label and if this matches
+   the one given in the command line */
+static void
+match_volume_label (void)
+{
+  if (!volume_label)
+    {
+      union block *label = find_next_block ();
+
+      if (!label)
+       FATAL_ERROR ((0, 0, _("Archive not labeled to match %s"),
+                     quote (volume_label_option)));
+      if (label->header.typeflag == GNUTYPE_VOLHDR)
+       {
+         if (memchr (label->header.name, '\0', sizeof label->header.name))
+           assign_string (&volume_label, label->header.name);
+         else
+           {
+             volume_label = xmalloc (sizeof (label->header.name) + 1);
+             memcpy (volume_label, label->header.name,
+                     sizeof (label->header.name));
+             volume_label[sizeof (label->header.name)] = 0;
+           }
+       }
+      else if (label->header.typeflag == XGLTYPE)
+       {
+         struct tar_stat_info st;
+         tar_stat_init (&st);
+         xheader_read (&st.xhdr, label,
+                       OFF_FROM_HEADER (label->header.size));
+         xheader_decode (&st);
+         tar_stat_destroy (&st);
+       }
+    }
+
+  if (!volume_label)
+    FATAL_ERROR ((0, 0, _("Archive not labeled to match %s"),
+                  quote (volume_label_option)));
+
+  if (!check_label_pattern (volume_label))
+    FATAL_ERROR ((0, 0, _("Volume %s does not match %s"),
+                  quote_n (0, volume_label),
+                  quote_n (1, volume_label_option)));
+}
+
+/* Mark the archive with volume label STR. */
+static void
+_write_volume_label (const char *str)
+{
+  if (archive_format == POSIX_FORMAT)
+    xheader_store ("GNU.volume.label", &dummy, str);
+  else
+    {
+      union block *label = find_next_block ();
+
+      memset (label, 0, BLOCKSIZE);
+
+      strcpy (label->header.name, str);
+      assign_string (&current_stat_info.file_name,
+                     label->header.name);
+      current_stat_info.had_trailing_slash =
+        strip_trailing_slashes (current_stat_info.file_name);
+
+      label->header.typeflag = GNUTYPE_VOLHDR;
+      TIME_TO_CHARS (start_time.tv_sec, label->header.mtime);
+      finish_header (&current_stat_info, label, -1);
+      set_next_block_after (label);
+    }
+}
+
+#define VOL_SUFFIX "Volume"
+
+/* Add a volume label to a part of multi-volume archive */
+static void
+add_volume_label (void)
+{
+  char buf[UINTMAX_STRSIZE_BOUND];
+  char *p = STRINGIFY_BIGINT (volno, buf);
+  char *s = xmalloc (strlen (volume_label_option) + sizeof VOL_SUFFIX
+                     + strlen (p) + 2);
+  sprintf (s, "%s %s %s", volume_label_option, VOL_SUFFIX, p);
+  _write_volume_label (s);
+  free (s);
+}
+
+static void
+add_chunk_header (struct bufmap *map)
+{
+  if (archive_format == POSIX_FORMAT)
+    {
+      off_t block_ordinal;
+      union block *blk;
+      struct tar_stat_info st;
+
+      memset (&st, 0, sizeof st);
+      st.orig_file_name = st.file_name = map->file_name;
+      st.stat.st_mode = S_IFREG|S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH;
+      st.stat.st_uid = getuid ();
+      st.stat.st_gid = getgid ();
+      st.orig_file_name = xheader_format_name (&st,
+                                               "%d/GNUFileParts.%p/%f.%n",
+                                               volno);
+      st.file_name = st.orig_file_name;
+      st.archive_file_size = st.stat.st_size = map->sizeleft;
+
+      block_ordinal = current_block_ordinal ();
+      blk = start_header (&st);
+      if (!blk)
+        abort (); /* FIXME */
+      finish_header (&st, blk, block_ordinal);
+      free (st.orig_file_name);
+    }
+}
+
+
+/* Add a volume label to the current archive */
+static void
+write_volume_label (void)
+{
+  if (multi_volume_option)
+    add_volume_label ();
+  else
+    _write_volume_label (volume_label_option);
+}
+
+/* Write GNU multi-volume header */
+static void
+gnu_add_multi_volume_header (struct bufmap *map)
+{
+  int tmp;
+  union block *block = find_next_block ();
+
+  if (strlen (map->file_name) > NAME_FIELD_SIZE)
+    WARN ((0, 0,
+           _("%s: file name too long to be stored in a GNU multivolume header, truncated"),
+           quotearg_colon (map->file_name)));
+
+  memset (block, 0, BLOCKSIZE);
+
+  strncpy (block->header.name, map->file_name, NAME_FIELD_SIZE);
+  block->header.typeflag = GNUTYPE_MULTIVOL;
+
+  OFF_TO_CHARS (map->sizeleft, block->header.size);
+  OFF_TO_CHARS (map->sizetotal - map->sizeleft,
+                block->oldgnu_header.offset);
+
+  tmp = verbose_option;
+  verbose_option = 0;
+  finish_header (&current_stat_info, block, -1);
+  verbose_option = tmp;
+  set_next_block_after (block);
+}
+
+/* Add a multi volume header to the current archive. The exact header format
+   depends on the archive format. */
+static void
+add_multi_volume_header (struct bufmap *map)
+{
+  if (archive_format == POSIX_FORMAT)
+    {
+      off_t d = map->sizetotal - map->sizeleft;
+      xheader_store ("GNU.volume.filename", &dummy, map->file_name);
+      xheader_store ("GNU.volume.size", &dummy, &map->sizeleft);
+      xheader_store ("GNU.volume.offset", &dummy, &d);
+    }
+  else
+    gnu_add_multi_volume_header (map);
+}
+
+\f
+/* Low-level flush functions */
+
+/* Simple flush read (no multi-volume or label extensions) */
+static void
+simple_flush_read (void)
+{
+  size_t status;                /* result from system call */
+
+  checkpoint_run (false);
+
+  /* Clear the count of errors.  This only applies to a single call to
+     flush_read.  */
+
+  read_error_count = 0;         /* clear error count */
+
+  if (write_archive_to_stdout && record_start_block != 0)
+    {
+      archive = STDOUT_FILENO;
+      status = sys_write_archive_buffer ();
+      archive = STDIN_FILENO;
+      if (status != record_size)
+        archive_write_error (status);
+    }
+
+  for (;;)
+    {
+      status = rmtread (archive, record_start->buffer, record_size);
+      if (status == record_size)
+        {
+          records_read++;
+          return;
+        }
+      if (status == SAFE_READ_ERROR)
+        {
+          archive_read_error ();
+          continue;             /* try again */
+        }
+      break;
+    }
+  short_read (status);
+}
+
+/* Simple flush write (no multi-volume or label extensions) */
+static void
+simple_flush_write (size_t level __attribute__((unused)))
+{
+  ssize_t status;
+
+  status = _flush_write ();
+  if (status != record_size)
+    archive_write_error (status);
+  else
+    {
+      records_written++;
+      bytes_written += status;
+    }
+}
+
+\f
+/* GNU flush functions. These support multi-volume and archive labels in
+   GNU and PAX archive formats. */
+
+static void
+_gnu_flush_read (void)
+{
+  size_t status;                /* result from system call */
+
+  checkpoint_run (false);
+
+  /* Clear the count of errors.  This only applies to a single call to
+     flush_read.  */
+
+  read_error_count = 0;         /* clear error count */
+
+  if (write_archive_to_stdout && record_start_block != 0)
+    {
+      archive = STDOUT_FILENO;
+      status = sys_write_archive_buffer ();
+      archive = STDIN_FILENO;
+      if (status != record_size)
+        archive_write_error (status);
+    }
+
+  for (;;)
+    {
+      status = rmtread (archive, record_start->buffer, record_size);
+      if (status == record_size)
+        {
+          records_read++;
+          return;
+        }
+
+      /* The condition below used to include
+              || (status > 0 && !read_full_records)
+         This is incorrect since even if new_volume() succeeds, the
+         subsequent call to rmtread will overwrite the chunk of data
+         already read in the buffer, so the processing will fail */
+      if ((status == 0
+           || (status == SAFE_READ_ERROR && errno == ENOSPC))
+          && multi_volume_option)
+        {
+          while (!try_new_volume ())
+            ;
+         if (current_block == record_end)
+           /* Necessary for blocking_factor == 1 */
+           flush_archive();
+          return;
+        }
+      else if (status == SAFE_READ_ERROR)
+        {
+          archive_read_error ();
+          continue;
+        }
+      break;
+    }
+  short_read (status);
+}
+
+static void
+gnu_flush_read (void)
+{
+  flush_read_ptr = simple_flush_read; /* Avoid recursion */
+  _gnu_flush_read ();
+  flush_read_ptr = gnu_flush_read;
+}
+
+static void
+_gnu_flush_write (size_t buffer_level)
+{
+  ssize_t status;
+  union block *header;
+  char *copy_ptr;
+  size_t copy_size;
+  size_t bufsize;
+  struct bufmap *map;
+
+  status = _flush_write ();
+  if (status != record_size && !multi_volume_option)
+    archive_write_error (status);
+  else
+    {
+      if (status)
+        records_written++;
+      bytes_written += status;
+    }
+
+  if (status == record_size)
+    {
+      return;
+    }
+
+  map = bufmap_locate (status);
+
+  if (status % BLOCKSIZE)
+    {
+      ERROR ((0, 0, _("write did not end on a block boundary")));
+      archive_write_error (status);
+    }
+
+  /* In multi-volume mode. */
+  /* ENXIO is for the UNIX PC.  */
+  if (status < 0 && errno != ENOSPC && errno != EIO && errno != ENXIO)
+    archive_write_error (status);
+
+  if (!new_volume (ACCESS_WRITE))
+    return;
+
+  tar_stat_destroy (&dummy);
+
+  increase_volume_number ();
+  prev_written += bytes_written;
+  bytes_written = 0;
+
+  copy_ptr = record_start->buffer + status;
+  copy_size = buffer_level - status;
 
 
-  return 1;
+  /* Switch to the next buffer */
+  record_index = !record_index;
+  init_buffer ();
+
+  inhibit_map = 1;
+
+  if (volume_label_option)
+    add_volume_label ();
+
+  if (map)
+    add_multi_volume_header (map);
+
+  write_extended (true, &dummy, find_next_block ());
+  tar_stat_destroy (&dummy);
+
+  if (map)
+    add_chunk_header (map);
+  header = find_next_block ();
+  bufmap_reset (map, header - record_start);
+  bufsize = available_space_after (header);
+  inhibit_map = 0;
+  while (bufsize < copy_size)
+    {
+      memcpy (header->buffer, copy_ptr, bufsize);
+      copy_ptr += bufsize;
+      copy_size -= bufsize;
+      set_next_block_after (header + (bufsize - 1) / BLOCKSIZE);
+      header = find_next_block ();
+      bufsize = available_space_after (header);
+    }
+  memcpy (header->buffer, copy_ptr, copy_size);
+  memset (header->buffer + copy_size, 0, bufsize - copy_size);
+  set_next_block_after (header + (copy_size - 1) / BLOCKSIZE);
+  find_next_block ();
+}
+
+static void
+gnu_flush_write (size_t buffer_level)
+{
+  flush_write_ptr = simple_flush_write; /* Avoid recursion */
+  _gnu_flush_write (buffer_level);
+  flush_write_ptr = gnu_flush_write;
+}
+
+void
+flush_read ()
+{
+  flush_read_ptr ();
+}
+
+void
+flush_write ()
+{
+  flush_write_ptr (record_size);
+}
+
+void
+open_archive (enum access_mode wanted_access)
+{
+  flush_read_ptr = gnu_flush_read;
+  flush_write_ptr = gnu_flush_write;
+
+  _open_archive (wanted_access);
+  switch (wanted_access)
+    {
+    case ACCESS_READ:
+    case ACCESS_UPDATE:
+      if (volume_label_option)
+        match_volume_label ();
+      break;
+
+    case ACCESS_WRITE:
+      records_written = 0;
+      if (volume_label_option)
+        write_volume_label ();
+      break;
+    }
+  set_volume_start_time ();
 }
 }
This page took 0.09236 seconds and 4 git commands to generate.