]> Dogcows Code - chaz/tar/blobdiff - src/buffer.c
Add fseeko and snprintf.
[chaz/tar] / src / buffer.c
index 017282748ef07be5abef4a303f210167bf0c7bd6..36a0cfddcfeaa2206d98bb4fefc831f46101a1fa 100644 (file)
@@ -1,10 +1,13 @@
 /* Buffer management for tar.
 /* Buffer management for tar.
-   Copyright 1988, 92, 93, 94, 96, 97, 1999 Free Software Foundation, Inc.
+
+   Copyright (C) 1988, 1992, 1993, 1994, 1996, 1997, 1999, 2000, 2001,
+   2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
+
    Written by John Gilmore, on 1985-08-25.
 
    This program is free software; you can redistribute it and/or modify it
    under the terms of the GNU General Public License as published by the
    Written by John Gilmore, on 1985-08-25.
 
    This program is free software; you can redistribute it and/or modify it
    under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2, or (at your option) any later
+   Free Software Foundation; either version 3, or (at your option) any later
    version.
 
    This program is distributed in the hope that it will be useful, but
    version.
 
    This program is distributed in the hope that it will be useful, but
 
    You should have received a copy of the GNU General Public License along
    with this program; if not, write to the Free Software Foundation, Inc.,
 
    You should have received a copy of the GNU General Public License along
    with this program; if not, write to the Free Software Foundation, Inc.,
-   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-/* Enable GNU extensions in fnmatch.h.  */
-#ifndef _GNU_SOURCE
-# define _GNU_SOURCE 1
-#endif
+   51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  */
 
 
-#include "system.h"
+#include <system.h>
+#include <system-ioctl.h>
 
 #include <signal.h>
 
 #include <signal.h>
-#include <time.h>
-#ifndef time
-time_t time ();
-#endif
-
-#if MSDOS
-# include <process.h>
-#endif
-
-#if XENIX
-# include <sys/inode.h>
-#endif
 
 
+#include <closeout.h>
 #include <fnmatch.h>
 #include <human.h>
 #include <fnmatch.h>
 #include <human.h>
+#include <quotearg.h>
 
 #include "common.h"
 
 #include "common.h"
-#include "rmt.h"
-
-#define DEBUG_FORK 0           /* if nonzero, childs are born stopped */
-
-#define        PREAD 0                 /* read file descriptor from pipe() */
-#define        PWRITE 1                /* write file descriptor from pipe() */
+#include <rmt.h>
 
 /* Number of retries before giving up on read.  */
 #define        READ_ERROR_MAX 10
 
 /* Globbing pattern to append to volume label if initial match failed.  */
 #define VOLUME_LABEL_APPEND " Volume [1-9]*"
 
 /* Number of retries before giving up on read.  */
 #define        READ_ERROR_MAX 10
 
 /* Globbing pattern to append to volume label if initial match failed.  */
 #define VOLUME_LABEL_APPEND " Volume [1-9]*"
-\f
+
 /* Variables.  */
 
 static tarlong prev_written;   /* bytes written on previous volumes */
 static tarlong bytes_written;  /* bytes written on this volume */
 /* Variables.  */
 
 static tarlong prev_written;   /* bytes written on previous volumes */
 static tarlong bytes_written;  /* bytes written on this volume */
+static void *record_buffer[2]; /* allocated memory */
+union block *record_buffer_aligned[2];
+static int record_index;
 
 
-/* FIXME: The following four variables should ideally be static to this
-   module.  However, this cannot be done yet, as update.c uses the first
-   three a lot, and compare.c uses the fourth.  The cleanup continues!  */
+/* FIXME: The following variables should ideally be static to this
+   module.  However, this cannot be done yet.  The cleanup continues!  */
 
 union block *record_start;     /* start of record of archive */
 union block *record_end;       /* last+1 block of archive record */
 union block *current_block;    /* current block of archive */
 enum access_mode access_mode;  /* how do we handle the archive */
 
 union block *record_start;     /* start of record of archive */
 union block *record_end;       /* last+1 block of archive record */
 union block *current_block;    /* current block of archive */
 enum access_mode access_mode;  /* how do we handle the archive */
-static struct stat archive_stat; /* stat block for archive file */
+off_t records_read;            /* number of records read from this archive */
+off_t records_written;         /* likewise, for records written */
+extern off_t records_skipped;   /* number of records skipped at the start
+                                  of the archive, defined in delete.c */   
 
 static off_t record_start_block; /* block ordinal at record_start */
 
 
 static off_t record_start_block; /* block ordinal at record_start */
 
-/* Where we write list messages (not errors, not interactions) to.  Stdout
-   unless we're writing a pipe, in which case stderr.  */
+/* Where we write list messages (not errors, not interactions) to.  */
 FILE *stdlis;
 
 FILE *stdlis;
 
-static void backspace_output PARAMS ((void));
-static int new_volume PARAMS ((enum access_mode));
-static void write_error PARAMS ((ssize_t));
-static void read_error PARAMS ((void));
-
-#if !MSDOS
-/* Obnoxious test to see if dimwit is trying to dump the archive.  */
-dev_t ar_dev;
-ino_t ar_ino;
-#endif
+static void backspace_output (void);
 
 /* PID of child program, if compress_option or remote archive access.  */
 static pid_t child_pid;
 
 /* PID of child program, if compress_option or remote archive access.  */
 static pid_t child_pid;
@@ -93,123 +72,313 @@ static pid_t child_pid;
 static int read_error_count;
 
 /* Have we hit EOF yet?  */
 static int read_error_count;
 
 /* Have we hit EOF yet?  */
-static int hit_eof;
+static bool hit_eof;
+
+static bool read_full_records = false;
 
 
-/* Checkpointing counter */
-static int checkpoint;
+/* We're reading, but we just read the last block and it's time to update.
+   Declared in update.c
 
 
-/* We're reading, but we just read the last block and its time to update.  */
-/* As least EXTERN like this one as possible.  FIXME!  */
-extern int time_to_start_writing;
+   As least EXTERN like this one as possible. (?? --gray)
+   FIXME: Either eliminate it or move it to common.h.
+*/
+extern bool time_to_start_writing;
 
 
-int file_to_switch_to = -1;    /* if remote update, close archive, and use
-                                  this descriptor to write to */
+bool write_archive_to_stdout;
 
 
+void (*flush_write_ptr) (size_t);
+void (*flush_read_ptr) (void);
+
+\f
+char *volume_label;
+char *continued_file_name;
+uintmax_t continued_file_size;
+uintmax_t continued_file_offset;
+
+\f
 static int volno = 1;          /* which volume of a multi-volume tape we're
                                   on */
 static int global_volno = 1;   /* volume number to print in external
                                   messages */
 
 static int volno = 1;          /* which volume of a multi-volume tape we're
                                   on */
 static int global_volno = 1;   /* volume number to print in external
                                   messages */
 
-/* The pointer save_name, which is set in function dump_file() of module
-   create.c, points to the original long filename instead of the new,
-   shorter mangled name that is set in start_header() of module create.c.
-   The pointer save_name is only used in multi-volume mode when the file
-   being processed is non-sparse; if a file is split between volumes, the
-   save_name is used in generating the LF_MULTIVOL record on the second
-   volume.  (From Pierce Cantrell, 1991-08-13.)  */
-
-char *save_name;               /* name of the file we are currently writing */
-off_t save_totsize;            /* total size of file we are writing, only
-                                  valid if save_name is nonzero */
-off_t save_sizeleft;           /* where we are in the file we are writing,
-                                  only valid if save_name is nonzero */
-
-int write_archive_to_stdout;
+bool write_archive_to_stdout;
 
 /* Used by flush_read and flush_write to store the real info about saved
    names.  */
 static char *real_s_name;
 static off_t real_s_totsize;
 static off_t real_s_sizeleft;
 
 /* Used by flush_read and flush_write to store the real info about saved
    names.  */
 static char *real_s_name;
 static off_t real_s_totsize;
 static off_t real_s_sizeleft;
+
 \f
 \f
-/* Functions.  */
+/* Multi-volume tracking support */
+static char *save_name;                /* name of the file we are currently writing */
+static off_t save_totsize;     /* total size of file we are writing, only
+                                  valid if save_name is nonzero */
+static off_t save_sizeleft;    /* where we are in the file we are writing,
+                                  only valid if save_name is nonzero */
 
 
-#if DEBUG_FORK
+\f
+static struct tar_stat_info dummy;
 
 
-static pid_t
-myfork (void)
+void
+buffer_write_global_xheader ()
 {
 {
-  pid_t result = fork ();
+  xheader_write_global (&dummy.xhdr);
+}
 
 
-  if (result == 0)
-    kill (getpid (), SIGSTOP);
-  return result;
+void
+mv_begin (struct tar_stat_info *st)
+{
+  if (multi_volume_option)
+    {
+      assign_string (&save_name,  st->orig_file_name);
+      save_totsize = save_sizeleft = st->stat.st_size;
+    }
+}
+
+void
+mv_end ()
+{
+  if (multi_volume_option)
+    assign_string (&save_name, 0);
+}
+
+void
+mv_total_size (off_t size)
+{
+  save_totsize = size;
+}
+
+void
+mv_size_left (off_t size)
+{
+  save_sizeleft = size;
+}
+
+\f
+/* Functions.  */
+
+void
+clear_read_error_count (void)
+{
+  read_error_count = 0;
 }
 
 }
 
-# define fork myfork
+\f
+/* Time-related functions */
+
+double duration;
+
+void
+set_start_time ()
+{
+  gettime (&start_time);
+  volume_start_time = start_time;
+  last_stat_time = start_time;
+}
 
 
-#endif /* DEBUG FORK */
+void
+set_volume_start_time ()
+{
+  gettime (&volume_start_time);
+  last_stat_time = volume_start_time;
+}
 
 void
 
 void
-print_total_written (void)
+compute_duration ()
+{
+  struct timespec now;
+  gettime (&now);
+  duration += ((now.tv_sec - last_stat_time.tv_sec)
+              + (now.tv_nsec - last_stat_time.tv_nsec) / 1e9);
+  gettime (&last_stat_time);
+}
+
+\f
+/* Compression detection */
+
+enum compress_type {
+  ct_none,
+  ct_compress,
+  ct_gzip,
+  ct_bzip2,
+  ct_lzma
+};
+
+struct zip_magic
+{
+  enum compress_type type;
+  size_t length;
+  char *magic;
+  char *program;
+  char *option;
+};
+
+static struct zip_magic const magic[] = {
+  { ct_none, },
+  { ct_compress, 2, "\037\235", "compress", "-Z" },
+  { ct_gzip,     2, "\037\213", "gzip", "-z"  },
+  { ct_bzip2,    3, "BZh",      "bzip2", "-j" },
+  { ct_lzma,     6, "\xFFLZMA", "lzma", "--lzma" }, /* FIXME: ???? */
+};
+
+#define NMAGIC (sizeof(magic)/sizeof(magic[0]))
+
+#define compress_option(t) magic[t].option
+#define compress_program(t) magic[t].program
+
+/* Check if the file ARCHIVE is a compressed archive. */
+enum compress_type
+check_compressed_archive ()
+{
+  struct zip_magic const *p;
+  bool sfr;
+  bool short_file = false;
+  
+  /* Prepare global data needed for find_next_block: */
+  record_end = record_start; /* set up for 1st record = # 0 */
+  sfr = read_full_records;
+  read_full_records = true; /* Suppress fatal error on reading a partial
+                              record */
+  if (find_next_block () == 0)
+    short_file = true;
+  
+  /* Restore global values */
+  read_full_records = sfr;
+
+  if (tar_checksum (record_start, true) == HEADER_SUCCESS)
+    /* Probably a valid header */
+    return ct_none;
+
+  for (p = magic + 1; p < magic + NMAGIC; p++)
+    if (memcmp (record_start->buffer, p->magic, p->length) == 0)
+      return p->type;
+
+  if (short_file)
+    ERROR ((0, 0, _("This does not look like a tar archive")));
+
+  return ct_none;
+}
+
+/* Open an archive named archive_name_array[0]. Detect if it is
+   a compressed archive of known type and use corresponding decompression
+   program if so */
+int
+open_compressed_archive ()
+{
+  archive = rmtopen (archive_name_array[0], O_RDONLY | O_BINARY,
+                    MODE_RW, rsh_command_option);
+  if (archive == -1)
+    return archive;
+
+  if (!multi_volume_option)
+    {
+      enum compress_type type = check_compressed_archive ();
+
+      if (type == ct_none)
+       return archive;
+
+      /* FD is not needed any more */
+      rmtclose (archive);
+
+      hit_eof = false; /* It might have been set by find_next_block in
+                         check_compressed_archive */
+
+      /* Open compressed archive */
+      use_compress_program_option = compress_program (type);
+      child_pid = sys_child_open_for_uncompress ();
+      read_full_records = true;
+    }
+
+  records_read = 0;
+  record_end = record_start; /* set up for 1st record = # 0 */
+
+  return archive;
+}
+\f
+
+static void
+print_stats (FILE *fp, const char *text, tarlong numbytes)
 {
 {
-  tarlong written = prev_written + bytes_written;
   char bytes[sizeof (tarlong) * CHAR_BIT];
   char abbr[LONGEST_HUMAN_READABLE + 1];
   char rate[LONGEST_HUMAN_READABLE + 1];
   char bytes[sizeof (tarlong) * CHAR_BIT];
   char abbr[LONGEST_HUMAN_READABLE + 1];
   char rate[LONGEST_HUMAN_READABLE + 1];
-  double seconds;
 
 
-#if HAVE_CLOCK_GETTIME
-  struct timespec now;
-  if (clock_gettime (CLOCK_REALTIME, &now) == 0)
-    seconds = ((now.tv_sec - start_timespec.tv_sec)
-              + (now.tv_nsec - start_timespec.tv_nsec) / 1e9);
-  else
-#endif
-    seconds = time (0) - start_time;
+  int human_opts = human_autoscale | human_base_1024 | human_SI | human_B;
 
 
-  sprintf (bytes, TARLONG_FORMAT, written);
+  sprintf (bytes, TARLONG_FORMAT, numbytes);
 
 
-  /* Amanda 2.4.1p1 looks for "Total bytes written: [0-9][0-9]*".  */
-  fprintf (stderr, _("Total bytes written: %s (%sB, %sB/s)\n"), bytes,
-          human_readable ((uintmax_t) written, abbr, 1, -1024),
-          (0 < seconds && written / seconds < (uintmax_t) -1
-           ? human_readable ((uintmax_t) (written / seconds), rate, 1, -1024)
+  fprintf (fp, "%s: %s (%s, %s/s)\n",
+          text, bytes,
+          human_readable (numbytes, abbr, human_opts, 1, 1),
+          (0 < duration && numbytes / duration < (uintmax_t) -1
+           ? human_readable (numbytes / duration, rate, human_opts, 1, 1)
            : "?"));
 }
 
            : "?"));
 }
 
-/*--------------------------------------------------------.
-| Compute and return the block ordinal at current_block.  |
-`--------------------------------------------------------*/
+void
+print_total_stats ()
+{
+  switch (subcommand_option)
+    {
+    case CREATE_SUBCOMMAND:
+    case CAT_SUBCOMMAND:
+    case UPDATE_SUBCOMMAND:
+    case APPEND_SUBCOMMAND:
+      /* Amanda 2.4.1p1 looks for "Total bytes written: [0-9][0-9]*".  */
+      print_stats (stderr, _("Total bytes written"),
+                  prev_written + bytes_written);
+      break;
+
+    case DELETE_SUBCOMMAND:
+      {
+       char buf[UINTMAX_STRSIZE_BOUND];
+       print_stats (stderr, _("Total bytes read"),
+                    records_read * record_size);
+       print_stats (stderr, _("Total bytes written"),
+                    prev_written + bytes_written);
+       fprintf (stderr, _("Total bytes deleted: %s\n"),
+                STRINGIFY_BIGINT ((records_read - records_skipped)
+                                   * record_size
+                                  - (prev_written + bytes_written), buf));
+      }
+      break;
+
+    case EXTRACT_SUBCOMMAND:
+    case LIST_SUBCOMMAND:
+    case DIFF_SUBCOMMAND:
+      print_stats (stderr, _("Total bytes read"),
+                  records_read * record_size);
+      break;
+
+    default:
+      abort ();
+    }
+}
 
 
+/* Compute and return the block ordinal at current_block.  */
 off_t
 current_block_ordinal (void)
 {
   return record_start_block + (current_block - record_start);
 }
 
 off_t
 current_block_ordinal (void)
 {
   return record_start_block + (current_block - record_start);
 }
 
-/*------------------------------------------------------------------.
-| If the EOF flag is set, reset it, as well as current_block, etc.  |
-`------------------------------------------------------------------*/
-
+/* If the EOF flag is set, reset it, as well as current_block, etc.  */
 void
 reset_eof (void)
 {
   if (hit_eof)
     {
 void
 reset_eof (void)
 {
   if (hit_eof)
     {
-      hit_eof = 0;
+      hit_eof = false;
       current_block = record_start;
       record_end = record_start + blocking_factor;
       access_mode = ACCESS_WRITE;
     }
 }
 
       current_block = record_start;
       record_end = record_start + blocking_factor;
       access_mode = ACCESS_WRITE;
     }
 }
 
-/*-------------------------------------------------------------------------.
-| Return the location of the next available input or output block.        |
-| Return zero for EOF.  Once we have returned zero, we just keep returning |
-| it, to avoid accidentally going on to the next file on the tape.        |
-`-------------------------------------------------------------------------*/
-
+/* Return the location of the next available input or output block.
+   Return zero for EOF.  Once we have returned zero, we just keep returning
+   it, to avoid accidentally going on to the next file on the tape.  */
 union block *
 find_next_block (void)
 {
 union block *
 find_next_block (void)
 {
@@ -220,19 +389,14 @@ find_next_block (void)
       flush_archive ();
       if (current_block == record_end)
        {
       flush_archive ();
       if (current_block == record_end)
        {
-         hit_eof = 1;
+         hit_eof = true;
          return 0;
        }
     }
   return current_block;
 }
 
          return 0;
        }
     }
   return current_block;
 }
 
-/*------------------------------------------------------.
-| Indicate that we have used all blocks up thru BLOCK.  |
-|                                                      |
-| FIXME: should the arg have an off-by-1?              |
-`------------------------------------------------------*/
-
+/* Indicate that we have used all blocks up thru BLOCK. */
 void
 set_next_block_after (union block *block)
 {
 void
 set_next_block_after (union block *block)
 {
@@ -247,1456 +411,1259 @@ set_next_block_after (union block *block)
     abort ();
 }
 
     abort ();
 }
 
-/*------------------------------------------------------------------------.
-| Return the number of bytes comprising the space between POINTER through |
-| the end of the current buffer of blocks.  This space is available for          |
-| filling with data, or taking data from.  POINTER is usually (but not   |
-| always) the result previous find_next_block call.                      |
-`------------------------------------------------------------------------*/
-
+/* Return the number of bytes comprising the space between POINTER
+   through the end of the current buffer of blocks.  This space is
+   available for filling with data, or taking data from.  POINTER is
+   usually (but not always) the result of previous find_next_block call.  */
 size_t
 available_space_after (union block *pointer)
 {
   return record_end->buffer - pointer->buffer;
 }
 
 size_t
 available_space_after (union block *pointer)
 {
   return record_end->buffer - pointer->buffer;
 }
 
-/*------------------------------------------------------------------.
-| Close file having descriptor FD, and abort if close unsuccessful. |
-`------------------------------------------------------------------*/
-
-static void
+/* Close file having descriptor FD, and abort if close unsuccessful.  */
+void
 xclose (int fd)
 {
 xclose (int fd)
 {
-  if (close (fd) < 0)
-    FATAL_ERROR ((0, errno, _("Cannot close file #%d"), fd));
+  if (close (fd) != 0)
+    close_error (_("(pipe)"));
 }
 
 }
 
-/*-----------------------------------------------------------------------.
-| Duplicate file descriptor FROM into becoming INTO, or else, issue     |
-| MESSAGE.  INTO is closed first and has to be the next available slot.         |
-`-----------------------------------------------------------------------*/
-
 static void
 static void
-xdup2 (int from, int into, const char *message)
+init_buffer ()
 {
 {
-  if (from != into)
-    {
-      int status = close (into);
-
-      if (status < 0 && errno != EBADF)
-       FATAL_ERROR ((0, errno, _("Cannot close descriptor %d"), into));
-      status = dup (from);
-      if (status != into)
-       FATAL_ERROR ((0, errno, _("Cannot properly duplicate %s"), message));
-      xclose (from);
-    }
-}
+  if (! record_buffer_aligned[record_index])
+    record_buffer_aligned[record_index] =
+      page_aligned_alloc (&record_buffer[record_index], record_size);
 
 
-#if MSDOS
-
-/*-------------------------------------------------------.
-| Set ARCHIVE for writing, then compressing an archive.         |
-`-------------------------------------------------------*/
+  record_start = record_buffer_aligned[record_index];
+  current_block = record_start;
+  record_end = record_start + blocking_factor;
+}
 
 
+/* Open an archive file.  The argument specifies whether we are
+   reading or writing, or both.  */
 static void
 static void
-child_open_for_compress (void)
+_open_archive (enum access_mode wanted_access)
 {
 {
-  FATAL_ERROR ((0, 0, _("Cannot use compressed or remote archives")));
-}
+  int backed_up_flag = 0;
 
 
-/*---------------------------------------------------------.
-| Set ARCHIVE for uncompressing, then reading an archive.  |
-`---------------------------------------------------------*/
+  if (record_size == 0)
+    FATAL_ERROR ((0, 0, _("Invalid value for record_size")));
 
 
-static void
-child_open_for_uncompress (void)
-{
-  FATAL_ERROR ((0, 0, _("Cannot use compressed or remote archives")));
-}
+  if (archive_names == 0)
+    FATAL_ERROR ((0, 0, _("No archive name given")));
 
 
-#else /* not MSDOS */
+  tar_stat_destroy (&current_stat_info);
+  save_name = 0;
+  real_s_name = 0;
 
 
-/*---------------------------------------------------------------------.
-| Return nonzero if NAME is the name of a regular file, or if the file |
-| does not exist (so it would be created as a regular file).          |
-`---------------------------------------------------------------------*/
+  record_index = 0;
+  init_buffer ();
 
 
-static int
-is_regular_file (const char *name)
-{
-  struct stat stbuf;
+  /* When updating the archive, we start with reading.  */
+  access_mode = wanted_access == ACCESS_UPDATE ? ACCESS_READ : wanted_access;
 
 
-  if (stat (name, &stbuf) == 0)
-    return S_ISREG (stbuf.st_mode);
-  else
-    return errno == ENOENT;
-}
+  read_full_records = read_full_records_option;
 
 
-static ssize_t
-write_archive_buffer (void)
-{
-  ssize_t status;
-  ssize_t written = 0;
+  records_read = 0;
 
 
-  while (0 <= (status = rmtwrite (archive, record_start->buffer + written,
-                                 record_size - written)))
+  if (use_compress_program_option)
     {
     {
-      written += status;
-      if (written == record_size
-         || _isrmt (archive) || ! S_ISFIFO (archive_stat.st_mode))
-       break;
-    }
+      switch (wanted_access)
+       {
+       case ACCESS_READ:
+         child_pid = sys_child_open_for_uncompress ();
+         read_full_records = true;
+         record_end = record_start; /* set up for 1st record = # 0 */
+         break;
 
 
-  return written ? written : status;
-}
+       case ACCESS_WRITE:
+         child_pid = sys_child_open_for_compress ();
+         break;
 
 
-/*-------------------------------------------------------.
-| Set ARCHIVE for writing, then compressing an archive.         |
-`-------------------------------------------------------*/
+       case ACCESS_UPDATE:
+         abort (); /* Should not happen */
+         break;
+       }
 
 
-static void
-child_open_for_compress (void)
-{
-  int parent_pipe[2];
-  int child_pipe[2];
-  pid_t grandchild_pid;
+      if (!index_file_name
+         && wanted_access == ACCESS_WRITE
+         && strcmp (archive_name_array[0], "-") == 0)
+       stdlis = stderr;
+    }
+  else if (strcmp (archive_name_array[0], "-") == 0)
+    {
+      read_full_records = true; /* could be a pipe, be safe */
+      if (verify_option)
+       FATAL_ERROR ((0, 0, _("Cannot verify stdin/stdout archive")));
 
 
-  if (pipe (parent_pipe) < 0)
-    FATAL_ERROR ((0, errno, _("Cannot open pipe")));
+      switch (wanted_access)
+       {
+       case ACCESS_READ:
+         {
+           enum compress_type type;
 
 
-  child_pid = fork ();
-  if (child_pid < 0)
-    FATAL_ERROR ((0, errno, _("Cannot fork")));
+           archive = STDIN_FILENO;
 
 
-  if (child_pid > 0)
-    {
-      /* The parent tar is still here!  Just clean up.  */
+           type = check_compressed_archive ();
+           if (type != ct_none)
+             FATAL_ERROR ((0, 0,
+                           _("Archive is compressed. Use %s option"),
+                           compress_option (type)));
+         }
+         break;
 
 
-      archive = parent_pipe[PWRITE];
-      xclose (parent_pipe[PREAD]);
-      return;
-    }
+       case ACCESS_WRITE:
+         archive = STDOUT_FILENO;
+         if (!index_file_name)
+           stdlis = stderr;
+         break;
 
 
-  /* The new born child tar is here!  */
+       case ACCESS_UPDATE:
+         archive = STDIN_FILENO;
+         write_archive_to_stdout = true;
+         record_end = record_start; /* set up for 1st record = # 0 */
+         if (!index_file_name)
+           stdlis = stderr;
+         break;
+       }
+    }
+  else if (verify_option)
+    archive = rmtopen (archive_name_array[0], O_RDWR | O_CREAT | O_BINARY,
+                      MODE_RW, rsh_command_option);
+  else
+    switch (wanted_access)
+      {
+      case ACCESS_READ:
+       archive = open_compressed_archive ();
+       break;
 
 
-  program_name = _("tar (child)");
+      case ACCESS_WRITE:
+       if (backup_option)
+         {
+           maybe_backup_file (archive_name_array[0], 1);
+           backed_up_flag = 1;
+         }
+       archive = rmtcreat (archive_name_array[0], MODE_RW,
+                           rsh_command_option);
+       break;
 
 
-  xdup2 (parent_pipe[PREAD], STDIN_FILENO, _("(child) Pipe to stdin"));
-  xclose (parent_pipe[PWRITE]);
+      case ACCESS_UPDATE:
+       archive = rmtopen (archive_name_array[0],
+                          O_RDWR | O_CREAT | O_BINARY,
+                          MODE_RW, rsh_command_option);
 
 
-  /* Check if we need a grandchild tar.  This happens only if either:
-     a) we are writing stdout: to force reblocking;
-     b) the file is to be accessed by rmt: compressor doesn't know how;
-     c) the file is not a plain file.  */
+       if (check_compressed_archive () != ct_none)
+         FATAL_ERROR ((0, 0,
+                       _("Cannot update compressed archives")));
+       break;
+      }
 
 
-  if (strcmp (archive_name_array[0], "-") != 0
-      && !_remdev (archive_name_array[0])
-      && is_regular_file (archive_name_array[0]))
+  if (archive < 0
+      || (! _isrmt (archive) && !sys_get_archive_stat ()))
     {
     {
-      if (backup_option)
-       maybe_backup_file (archive_name_array[0], 1);
+      int saved_errno = errno;
 
 
-      /* We don't need a grandchild tar.  Open the archive and launch the
-        compressor.  */
+      if (backed_up_flag)
+       undo_last_backup ();
+      errno = saved_errno;
+      open_fatal (archive_name_array[0]);
+    }
 
 
-      archive = creat (archive_name_array[0], MODE_RW);
-      if (archive < 0)
-       {
-         int saved_errno = errno;
+  sys_detect_dev_null_output ();
+  sys_save_archive_dev_ino ();
+  SET_BINARY_MODE (archive);
 
 
-         if (backup_option)
-           undo_last_backup ();
-         FATAL_ERROR ((0, saved_errno, _("Cannot open archive %s"),
-                       archive_name_array[0]));
-       }
-      xdup2 (archive, STDOUT_FILENO, _("Archive to stdout"));
-      execlp (use_compress_program_option, use_compress_program_option,
-             (char *) 0);
-      FATAL_ERROR ((0, errno, _("Cannot exec %s"),
-                   use_compress_program_option));
-    }
+  switch (wanted_access)
+    {
+    case ACCESS_READ:
+      find_next_block ();      /* read it in, check for EOF */
+      break;
 
 
-  /* We do need a grandchild tar.  */
+    case ACCESS_UPDATE:
+    case ACCESS_WRITE:
+      records_written = 0;
+      break;
+    }
+}
 
 
-  if (pipe (child_pipe) < 0)
-    FATAL_ERROR ((0, errno, _("Cannot open pipe")));
+/* Perform a write to flush the buffer.  */
+ssize_t
+_flush_write (void)
+{
+  ssize_t status;
 
 
-  grandchild_pid = fork ();
-  if (grandchild_pid < 0)
-    FATAL_ERROR ((0, errno, _("Child cannot fork")));
+  checkpoint_run (true);
+  if (tape_length_option && tape_length_option <= bytes_written)
+    {
+      errno = ENOSPC;
+      status = 0;
+    }
+  else if (dev_null_output)
+    status = record_size;
+  else
+    status = sys_write_archive_buffer ();
+  
+  return status;
+}
 
 
-  if (grandchild_pid > 0)
+/* Handle write errors on the archive.  Write errors are always fatal.
+   Hitting the end of a volume does not cause a write error unless the
+   write was the first record of the volume.  */
+void
+archive_write_error (ssize_t status)
+{
+  /* It might be useful to know how much was written before the error
+     occurred.  */
+  if (totals_option)
     {
     {
-      /* The child tar is still here!  Launch the compressor.  */
-
-      xdup2 (child_pipe[PWRITE], STDOUT_FILENO,
-            _("((child)) Pipe to stdout"));
-      xclose (child_pipe[PREAD]);
-      execlp (use_compress_program_option, use_compress_program_option,
-             (char *) 0);
-      FATAL_ERROR ((0, errno, _("Cannot exec %s"),
-                   use_compress_program_option));
+      int e = errno;
+      print_total_stats ();
+      errno = e;
     }
 
     }
 
-  /* The new born grandchild tar is here!  */
+  write_fatal_details (*archive_name_cursor, status, record_size);
+}
 
 
-  program_name = _("tar (grandchild)");
+/* Handle read errors on the archive.  If the read should be retried,
+   return to the caller.  */
+void
+archive_read_error (void)
+{
+  read_error (*archive_name_cursor);
 
 
-  /* Prepare for reblocking the data from the compressor into the archive.  */
+  if (record_start_block == 0)
+    FATAL_ERROR ((0, 0, _("At beginning of tape, quitting now")));
 
 
-  xdup2 (child_pipe[PREAD], STDIN_FILENO, _("(grandchild) Pipe to stdin"));
-  xclose (child_pipe[PWRITE]);
+  /* Read error in mid archive.  We retry up to READ_ERROR_MAX times and
+     then give up on reading the archive.  */
 
 
-  if (strcmp (archive_name_array[0], "-") == 0)
-    archive = STDOUT_FILENO;
-  else
-    archive = rmtcreat (archive_name_array[0], MODE_RW, rsh_command_option);
-  if (archive < 0)
-    FATAL_ERROR ((0, errno, _("Cannot open archive %s"),
-                 archive_name_array[0]));
+  if (read_error_count++ > READ_ERROR_MAX)
+    FATAL_ERROR ((0, 0, _("Too many errors, quitting")));
+  return;
+}
+
+static void
+short_read (size_t status)
+{
+  size_t left;                 /* bytes left */
+  char *more;                  /* pointer to next byte to read */
 
 
-  /* Let's read out of the stdin pipe and write an archive.  */
+  more = record_start->buffer + status;
+  left = record_size - status;
 
 
-  while (1)
+  while (left % BLOCKSIZE != 0
+        || (left && status && read_full_records))
     {
     {
-      ssize_t status = 0;
-      char *cursor;
-      size_t length;
+      if (status)
+       while ((status = rmtread (archive, more, left)) == SAFE_READ_ERROR)
+         archive_read_error ();
 
 
-      /* Assemble a record.  */
+      if (status == 0)
+       break;
 
 
-      for (length = 0, cursor = record_start->buffer;
-          length < record_size;
-          length += status, cursor += status)
+      if (! read_full_records)
        {
        {
-         size_t size = record_size - length;
+         unsigned long rest = record_size - left;
 
 
-         if (size < BLOCKSIZE)
-           size = BLOCKSIZE;
-         status = safe_read (STDIN_FILENO, cursor, size);
-         if (status <= 0)
-           break;
+         FATAL_ERROR ((0, 0,
+                       ngettext ("Unaligned block (%lu byte) in archive",
+                                 "Unaligned block (%lu bytes) in archive",
+                                 rest),
+                       rest));
        }
 
        }
 
-      if (status < 0)
-       FATAL_ERROR ((0, errno, _("Cannot read from compression program")));
+      /* User warned us about this.  Fix up.  */
 
 
-      /* Copy the record.  */
+      left -= status;
+      more += status;
+    }
 
 
-      if (status == 0)
-       {
-         /* We hit the end of the file.  Write last record at
-            full length, as the only role of the grandchild is
-            doing proper reblocking.  */
-
-         if (length > 0)
-           {
-             memset (record_start->buffer + length, 0, record_size - length);
-             status = write_archive_buffer ();
-             if (status != record_size)
-               write_error (status);
-           }
-
-         /* There is nothing else to read, break out.  */
-         break;
-       }
+  /* FIXME: for size=0, multi-volume support.  On the first record, warn
+     about the problem.  */
 
 
-      status = write_archive_buffer ();
-      if (status != record_size)
-       write_error (status);
+  if (!read_full_records && verbose_option > 1
+      && record_start_block == 0 && status != 0)
+    {
+      unsigned long rsize = (record_size - left) / BLOCKSIZE;
+      WARN ((0, 0,
+            ngettext ("Record size = %lu block",
+                      "Record size = %lu blocks",
+                      rsize),
+            rsize));
     }
 
     }
 
-#if 0
-  close_archive ();
-#endif
-  exit (exit_status);
+  record_end = record_start + (record_size - left) / BLOCKSIZE;
+  records_read++;
 }
 
 }
 
-/*---------------------------------------------------------.
-| Set ARCHIVE for uncompressing, then reading an archive.  |
-`---------------------------------------------------------*/
-
-static void
-child_open_for_uncompress (void)
+/*  Flush the current buffer to/from the archive.  */
+void
+flush_archive (void)
 {
 {
-  int parent_pipe[2];
-  int child_pipe[2];
-  pid_t grandchild_pid;
-
-  if (pipe (parent_pipe) < 0)
-    FATAL_ERROR ((0, errno, _("Cannot open pipe")));
+  size_t buffer_level = current_block->buffer - record_start->buffer;
+  record_start_block += record_end - record_start;
+  current_block = record_start;
+  record_end = record_start + blocking_factor;
 
 
-  child_pid = fork ();
-  if (child_pid < 0)
-    FATAL_ERROR ((0, errno, _("Cannot fork")));
+  if (access_mode == ACCESS_READ && time_to_start_writing)
+    {
+      access_mode = ACCESS_WRITE;
+      time_to_start_writing = false;
+      backspace_output ();
+    }
 
 
-  if (child_pid > 0)
+  switch (access_mode)
     {
     {
-      /* The parent tar is still here!  Just clean up.  */
+    case ACCESS_READ:
+      flush_read ();
+      break;
 
 
-      read_full_records_option = 1;
-      archive = parent_pipe[PREAD];
-      xclose (parent_pipe[PWRITE]);
-      return;
+    case ACCESS_WRITE:
+      flush_write_ptr (buffer_level);
+      break;
+
+    case ACCESS_UPDATE:
+      abort ();
     }
     }
+}
+
+/* Backspace the archive descriptor by one record worth.  If it's a
+   tape, MTIOCTOP will work.  If it's something else, try to seek on
+   it.  If we can't seek, we lose!  */
+static void
+backspace_output (void)
+{
+#ifdef MTIOCTOP
+  {
+    struct mtop operation;
 
 
-  /* The new born child tar is here!  */
+    operation.mt_op = MTBSR;
+    operation.mt_count = 1;
+    if (rmtioctl (archive, MTIOCTOP, (char *) &operation) >= 0)
+      return;
+    if (errno == EIO && rmtioctl (archive, MTIOCTOP, (char *) &operation) >= 0)
+      return;
+  }
+#endif
 
 
-  program_name = _("tar (child)");
+  {
+    off_t position = rmtlseek (archive, (off_t) 0, SEEK_CUR);
 
 
-  xdup2 (parent_pipe[PWRITE], STDOUT_FILENO, _("(child) Pipe to stdout"));
-  xclose (parent_pipe[PREAD]);
+    /* Seek back to the beginning of this record and start writing there.  */
 
 
-  /* Check if we need a grandchild tar.  This happens only if either:
-     a) we're reading stdin: to force unblocking;
-     b) the file is to be accessed by rmt: compressor doesn't know how;
-     c) the file is not a plain file.  */
+    position -= record_size;
+    if (position < 0)
+      position = 0;
+    if (rmtlseek (archive, position, SEEK_SET) != position)
+      {
+       /* Lseek failed.  Try a different method.  */
 
 
-  if (strcmp (archive_name_array[0], "-") != 0
-      && !_remdev (archive_name_array[0])
-      && is_regular_file (archive_name_array[0]))
-    {
-      /* We don't need a grandchild tar.  Open the archive and lauch the
-        uncompressor.  */
-
-      archive = open (archive_name_array[0], O_RDONLY | O_BINARY, MODE_RW);
-      if (archive < 0)
-       FATAL_ERROR ((0, errno, _("Cannot open archive %s"),
-                     archive_name_array[0]));
-      xdup2 (archive, STDIN_FILENO, _("Archive to stdin"));
-      execlp (use_compress_program_option, use_compress_program_option,
-             "-d", (char *) 0);
-      FATAL_ERROR ((0, errno, _("Cannot exec %s"),
-                   use_compress_program_option));
-    }
+       WARN ((0, 0,
+              _("Cannot backspace archive file; it may be unreadable without -i")));
 
 
-  /* We do need a grandchild tar.  */
+       /* Replace the first part of the record with NULs.  */
 
 
-  if (pipe (child_pipe) < 0)
-    FATAL_ERROR ((0, errno, _("Cannot open pipe")));
+       if (record_start->buffer != output_start)
+         memset (record_start->buffer, 0,
+                 output_start - record_start->buffer);
+      }
+  }
+}
 
 
-  grandchild_pid = fork ();
-  if (grandchild_pid < 0)
-    FATAL_ERROR ((0, errno, _("Child cannot fork")));
+off_t
+seek_archive (off_t size)
+{
+  off_t start = current_block_ordinal ();
+  off_t offset;
+  off_t nrec, nblk;
+  off_t skipped = (blocking_factor - (current_block - record_start));
 
 
-  if (grandchild_pid > 0)
-    {
-      /* The child tar is still here!  Launch the uncompressor.  */
-
-      xdup2 (child_pipe[PREAD], STDIN_FILENO, _("((child)) Pipe to stdin"));
-      xclose (child_pipe[PWRITE]);
-      execlp (use_compress_program_option, use_compress_program_option,
-             "-d", (char *) 0);
-      FATAL_ERROR ((0, errno, _("Cannot exec %s"),
-                   use_compress_program_option));
-    }
+  size -= skipped * BLOCKSIZE;
 
 
-  /* The new born grandchild tar is here!  */
+  if (size < record_size)
+    return 0;
+  /* FIXME: flush? */
 
 
-  program_name = _("tar (grandchild)");
+  /* Compute number of records to skip */
+  nrec = size / record_size;
+  offset = rmtlseek (archive, nrec * record_size, SEEK_CUR);
+  if (offset < 0)
+    return offset;
 
 
-  /* Prepare for unblocking the data from the archive into the uncompressor.  */
+  if (offset % record_size)
+    FATAL_ERROR ((0, 0, _("rmtlseek not stopped at a record boundary")));
 
 
-  xdup2 (child_pipe[PWRITE], STDOUT_FILENO, _("(grandchild) Pipe to stdout"));
-  xclose (child_pipe[PREAD]);
+  /* Convert to number of records */
+  offset /= BLOCKSIZE;
+  /* Compute number of skipped blocks */
+  nblk = offset - start;
 
 
-  if (strcmp (archive_name_array[0], "-") == 0)
-    archive = STDIN_FILENO;
-  else
-    archive = rmtopen (archive_name_array[0], O_RDONLY | O_BINARY,
-                      MODE_RW, rsh_command_option);
-  if (archive < 0)
-    FATAL_ERROR ((0, errno, _("Cannot open archive %s"),
-                 archive_name_array[0]));
+  /* Update buffering info */
+  records_read += nblk / blocking_factor;
+  record_start_block = offset - blocking_factor;
+  current_block = record_end;
 
 
-  /* Let's read the archive and pipe it into stdout.  */
+  return nblk;
+}
 
 
-  while (1)
+/* Close the archive file.  */
+void
+close_archive (void)
+{
+  if (time_to_start_writing || access_mode == ACCESS_WRITE)
     {
     {
-      char *cursor;
-      size_t maximum;
-      size_t count;
-      ssize_t status;
+      flush_archive ();
+      if (current_block > record_start)
+       flush_archive ();
+    }
 
 
-      read_error_count = 0;
+  sys_drain_input_pipe ();
 
 
-    error_loop:
-      status = rmtread (archive, record_start->buffer, record_size);
-      if (status < 0)
-       {
-         read_error ();
-         goto error_loop;
-       }
-      if (status == 0)
-       break;
-      cursor = record_start->buffer;
-      maximum = status;
-      while (maximum)
-       {
-         count = maximum < BLOCKSIZE ? maximum : BLOCKSIZE;
-         status = full_write (STDOUT_FILENO, cursor, count);
-         if (status < 0)
-           FATAL_ERROR ((0, errno, _("Cannot write to compression program")));
+  compute_duration ();
+  if (verify_option)
+    verify_volume ();
 
 
-         if (status != count)
-           {
-             ERROR ((0, 0, _("Write to compression program short %lu bytes"),
-                     (unsigned long) (count - status)));
-             count = status;
-           }
+  if (rmtclose (archive) != 0)
+    close_warn (*archive_name_cursor);
 
 
-         cursor += count;
-         maximum -= count;
-       }
-    }
+  sys_wait_for_child (child_pid);
 
 
-#if 0
-  close_archive ();
-#endif
-  exit (exit_status);
+  tar_stat_destroy (&current_stat_info);
+  if (save_name)
+    free (save_name);
+  if (real_s_name)
+    free (real_s_name);
+  free (record_buffer[0]);
+  free (record_buffer[1]);
 }
 
 }
 
-#endif /* not MSDOS */
-
-/*--------------------------------------------------------------------------.
-| Check the LABEL block against the volume label, seen as a globbing       |
-| pattern.  Return true if the pattern matches.  In case of failure, retry  |
-| matching a volume sequence number before giving up in multi-volume mode.  |
-`--------------------------------------------------------------------------*/
-
-static int
-check_label_pattern (union block *label)
+/* Called to initialize the global volume number.  */
+void
+init_volume_number (void)
 {
 {
-  char *string;
-  int result;
+  FILE *file = fopen (volno_file_option, "r");
 
 
-  if (fnmatch (volume_label_option, label->header.name, 0) == 0)
-    return 1;
+  if (file)
+    {
+      if (fscanf (file, "%d", &global_volno) != 1
+         || global_volno < 0)
+       FATAL_ERROR ((0, 0, _("%s: contains invalid volume number"),
+                     quotearg_colon (volno_file_option)));
+      if (ferror (file))
+       read_error (volno_file_option);
+      if (fclose (file) != 0)
+       close_error (volno_file_option);
+    }
+  else if (errno != ENOENT)
+    open_error (volno_file_option);
+}
 
 
-  if (!multi_volume_option)
-    return 0;
+/* Called to write out the closing global volume number.  */
+void
+closeout_volume_number (void)
+{
+  FILE *file = fopen (volno_file_option, "w");
 
 
-  string = xmalloc (strlen (volume_label_option)
-                   + sizeof VOLUME_LABEL_APPEND + 1);
-  strcpy (string, volume_label_option);
-  strcat (string, VOLUME_LABEL_APPEND);
-  result = fnmatch (string, label->header.name, 0) == 0;
-  free (string);
-  return result;
+  if (file)
+    {
+      fprintf (file, "%d\n", global_volno);
+      if (ferror (file))
+       write_error (volno_file_option);
+      if (fclose (file) != 0)
+       close_error (volno_file_option);
+    }
+  else
+    open_error (volno_file_option);
 }
 
 }
 
-/*------------------------------------------------------------------------.
-| Open an archive file.  The argument specifies whether we are reading or |
-| writing, or both.                                                      |
-`------------------------------------------------------------------------*/
+\f
+static void
+increase_volume_number ()
+{
+  global_volno++;
+  if (global_volno < 0)
+    FATAL_ERROR ((0, 0, _("Volume number overflow")));
+  volno++;
+}
 
 void
 
 void
-open_archive (enum access_mode access)
+change_tape_menu (FILE *read_file)
 {
 {
-  int backed_up_flag = 0;
+  char *input_buffer = NULL;
+  size_t size = 0;
+  bool stop = false;
+  
+  while (!stop)
+    {
+      fputc ('\007', stderr);
+      fprintf (stderr,
+              _("Prepare volume #%d for %s and hit return: "),
+              global_volno + 1, quote (*archive_name_cursor));
+      fflush (stderr);
 
 
-  stdlis = to_stdout_option ? stderr : stdout;
+      if (getline (&input_buffer, &size, read_file) <= 0)
+       {
+         WARN ((0, 0, _("EOF where user reply was expected")));
 
 
-  if (record_size == 0)
-    FATAL_ERROR ((0, 0, _("Invalid value for record_size")));
+         if (subcommand_option != EXTRACT_SUBCOMMAND
+             && subcommand_option != LIST_SUBCOMMAND
+             && subcommand_option != DIFF_SUBCOMMAND)
+           WARN ((0, 0, _("WARNING: Archive is incomplete")));
 
 
-  if (archive_names == 0)
-    FATAL_ERROR ((0, 0, _("No archive name given")));
+         fatal_exit ();
+       }
 
 
-  current_file_name = 0;
-  current_link_name = 0;
+      if (input_buffer[0] == '\n'
+         || input_buffer[0] == 'y'
+         || input_buffer[0] == 'Y')
+       break;
 
 
-  /* FIXME: According to POSIX.1, PATH_MAX may well not be a compile-time
-     constant, and the value from sysconf (_SC_PATH_MAX) may well not be any
-     size that is reasonable to allocate a buffer.  In the GNU system, there
-     is no fixed limit.  The only correct thing to do is to use dynamic
-     allocation.  (Roland McGrath)  */
+      switch (input_buffer[0])
+       {
+       case '?':
+         {
+           fprintf (stderr, _("\
+ n name        Give a new file name for the next (and subsequent) volume(s)\n\
+ q             Abort tar\n\
+ y or newline  Continue operation\n"));
+            if (!restrict_option)
+              fprintf (stderr, _(" !             Spawn a subshell\n"));
+           fprintf (stderr, _(" ?             Print this list\n"));
+         }
+         break;
 
 
-  if (!real_s_name)
-    real_s_name = xmalloc (PATH_MAX);
-  /* FIXME: real_s_name is never freed.  */
+       case 'q':
+         /* Quit.  */
 
 
-  save_name = 0;
+         WARN ((0, 0, _("No new volume; exiting.\n")));
 
 
-  if (multi_volume_option)
-    {
-      record_start = valloc (record_size + (2 * BLOCKSIZE));
-      if (record_start)
-       record_start += 2;
-    }
-  else
-    record_start = valloc (record_size);
-  if (!record_start)
-    FATAL_ERROR ((0, 0, _("Could not allocate memory for blocking factor %d"),
-                 blocking_factor));
+         if (subcommand_option != EXTRACT_SUBCOMMAND
+             && subcommand_option != LIST_SUBCOMMAND
+             && subcommand_option != DIFF_SUBCOMMAND)
+           WARN ((0, 0, _("WARNING: Archive is incomplete")));
 
 
-  current_block = record_start;
-  record_end = record_start + blocking_factor;
-  /* When updating the archive, we start with reading.  */
-  access_mode = access == ACCESS_UPDATE ? ACCESS_READ : access;
+         fatal_exit ();
 
 
-  if (multi_volume_option && verify_option)
-    FATAL_ERROR ((0, 0, _("Cannot verify multi-volume archives")));
+       case 'n':
+         /* Get new file name.  */
 
 
-  if (use_compress_program_option)
-    {
-      if (multi_volume_option)
-       FATAL_ERROR ((0, 0, _("Cannot use multi-volume compressed archives")));
-      if (verify_option)
-       FATAL_ERROR ((0, 0, _("Cannot verify compressed archives")));
+         {
+           char *name;
+           char *cursor;
 
 
-      switch (access)
-       {
-       case ACCESS_READ:
-         child_open_for_uncompress ();
-         break;
+           for (name = input_buffer + 1;
+                *name == ' ' || *name == '\t';
+                name++)
+             ;
 
 
-       case ACCESS_WRITE:
-         child_open_for_compress ();
-         break;
+           for (cursor = name; *cursor && *cursor != '\n'; cursor++)
+             ;
+           *cursor = '\0';
 
 
-       case ACCESS_UPDATE:
-         FATAL_ERROR ((0, 0, _("Cannot update compressed archives")));
+           if (name[0])
+             {
+               /* FIXME: the following allocation is never reclaimed.  */
+               *archive_name_cursor = xstrdup (name);
+               stop = true;
+             }
+           else
+             fprintf (stderr, "%s",
+                      _("File name not specified. Try again.\n"));
+         }
          break;
          break;
+
+       case '!':
+         if (!restrict_option)
+           {
+             sys_spawn_shell ();
+             break;
+           }
+         /* FALL THROUGH */
+
+       default:
+         fprintf (stderr, _("Invalid input. Type ? for help.\n"));
        }
        }
+    }
+  free (input_buffer);
+}
 
 
-      if (access == ACCESS_WRITE && strcmp (archive_name_array[0], "-") == 0)
-       stdlis = stderr;
+/* We've hit the end of the old volume.  Close it and open the next one.
+   Return nonzero on success.
+*/
+static bool
+new_volume (enum access_mode mode)
+{
+  static FILE *read_file;
+  static int looped;
+  int prompt;
+
+  if (!read_file && !info_script_option)
+    /* FIXME: if fopen is used, it will never be closed.  */
+    read_file = archive == STDIN_FILENO ? fopen (TTY_NAME, "r") : stdin;
+
+  if (now_verifying)
+    return false;
+  if (verify_option)
+    verify_volume ();
+
+  assign_string (&volume_label, NULL);
+  assign_string (&continued_file_name, NULL);
+  continued_file_size = continued_file_offset = 0;
+  current_block = record_start;
+  
+  if (rmtclose (archive) != 0)
+    close_warn (*archive_name_cursor);
+
+  archive_name_cursor++;
+  if (archive_name_cursor == archive_name_array + archive_names)
+    {
+      archive_name_cursor = archive_name_array;
+      looped = 1;
     }
     }
-  else if (strcmp (archive_name_array[0], "-") == 0)
+  prompt = looped;
+
+ tryagain:
+  if (prompt)
     {
     {
-      read_full_records_option = 1; /* could be a pipe, be safe */
-      if (verify_option)
-       FATAL_ERROR ((0, 0, _("Cannot verify stdin/stdout archive")));
+      /* We have to prompt from now on.  */
 
 
-      switch (access)
+      if (info_script_option)
        {
        {
-       case ACCESS_READ:
-         archive = STDIN_FILENO;
-         break;
-
-       case ACCESS_WRITE:
-         archive = STDOUT_FILENO;
-         stdlis = stderr;
-         break;
-
-       case ACCESS_UPDATE:
-         archive = STDIN_FILENO;
-         stdlis = stderr;
-         write_archive_to_stdout = 1;
-         break;
+         if (volno_file_option)
+           closeout_volume_number ();
+         if (sys_exec_info_script (archive_name_cursor, global_volno+1))
+           FATAL_ERROR ((0, 0, _("%s command failed"),
+                         quote (info_script_option)));
        }
        }
+      else
+       change_tape_menu (read_file);
+    }
+
+  if (strcmp (archive_name_cursor[0], "-") == 0)
+    {
+      read_full_records = true;
+      archive = STDIN_FILENO;
     }
   else if (verify_option)
     }
   else if (verify_option)
-    archive = rmtopen (archive_name_array[0], O_RDWR | O_CREAT | O_BINARY,
-                      MODE_RW, rsh_command_option);
+    archive = rmtopen (*archive_name_cursor, O_RDWR | O_CREAT, MODE_RW,
+                      rsh_command_option);
   else
   else
-    switch (access)
+    switch (mode)
       {
       case ACCESS_READ:
       {
       case ACCESS_READ:
-       archive = rmtopen (archive_name_array[0], O_RDONLY | O_BINARY,
-                          MODE_RW, rsh_command_option);
+       archive = rmtopen (*archive_name_cursor, O_RDONLY, MODE_RW,
+                          rsh_command_option);
        break;
 
       case ACCESS_WRITE:
        if (backup_option)
        break;
 
       case ACCESS_WRITE:
        if (backup_option)
-         {
-           maybe_backup_file (archive_name_array[0], 1);
-           backed_up_flag = 1;
-         }
-       archive = rmtcreat (archive_name_array[0], MODE_RW,
+         maybe_backup_file (*archive_name_cursor, 1);
+       archive = rmtcreat (*archive_name_cursor, MODE_RW,
                            rsh_command_option);
        break;
 
       case ACCESS_UPDATE:
                            rsh_command_option);
        break;
 
       case ACCESS_UPDATE:
-       archive = rmtopen (archive_name_array[0], O_RDWR | O_CREAT | O_BINARY,
-                          MODE_RW, rsh_command_option);
+       archive = rmtopen (*archive_name_cursor, O_RDWR | O_CREAT, MODE_RW,
+                          rsh_command_option);
        break;
       }
 
        break;
       }
 
-  if (archive < 0
-      || (! _isrmt (archive) && fstat (archive, &archive_stat) < 0))
+  if (archive < 0)
     {
     {
-      int saved_errno = errno;
-
-      if (backed_up_flag)
+      open_warn (*archive_name_cursor);
+      if (!verify_option && mode == ACCESS_WRITE && backup_option)
        undo_last_backup ();
        undo_last_backup ();
-      FATAL_ERROR ((0, saved_errno, "%s", archive_name_array[0]));
+      prompt = 1;
+      goto tryagain;
     }
 
     }
 
-#if !MSDOS
+  SET_BINARY_MODE (archive);
 
 
-  /* Detect if outputting to "/dev/null".  */
-  {
-    static char const dev_null[] = "/dev/null";
-    struct stat dev_null_stat;
-
-    dev_null_output =
-      (strcmp (archive_name_array[0], dev_null) == 0
-       || (! _isrmt (archive)
-          && S_ISCHR (archive_stat.st_mode)
-          && stat (dev_null, &dev_null_stat) == 0
-          && S_ISCHR (dev_null_stat.st_mode)
-          && archive_stat.st_rdev == dev_null_stat.st_rdev));
-  }
+  return true;
+}
+
+static bool
+read_header0 (struct tar_stat_info *info)
+{
+  enum read_header rc;
 
 
-  if (!_isrmt (archive) && S_ISREG (archive_stat.st_mode))
+  tar_stat_init (info);
+  rc = read_header_primitive (false, info);
+  if (rc == HEADER_SUCCESS)
     {
     {
-      ar_dev = archive_stat.st_dev;
-      ar_ino = archive_stat.st_ino;
+      set_next_block_after (current_header);
+      return true;
     }
     }
-  else
-    ar_dev = 0;
-
-#endif /* not MSDOS */
-
-#if MSDOS
-  setmode (archive, O_BINARY);
-#endif
+  ERROR ((0, 0, _("This does not look like a tar archive")));
+  return false;
+}
 
 
-  switch (access)
+bool
+try_new_volume ()
+{
+  size_t status;
+  union block *header;
+  enum access_mode acc;
+  
+  switch (subcommand_option)
     {
     {
-    case ACCESS_READ:
-    case ACCESS_UPDATE:
-      record_end = record_start; /* set up for 1st record = # 0 */
-      find_next_block ();      /* read it in, check for EOF */
-
-      if (volume_label_option)
-       {
-         union block *label = find_next_block ();
-
-         if (!label)
-           FATAL_ERROR ((0, 0, _("Archive not labeled to match `%s'"),
-                         volume_label_option));
-         if (!check_label_pattern (label))
-           FATAL_ERROR ((0, 0, _("Volume `%s' does not match `%s'"),
-                         label->header.name, volume_label_option));
-       }
+    case APPEND_SUBCOMMAND:
+    case CAT_SUBCOMMAND:
+    case UPDATE_SUBCOMMAND:
+      acc = ACCESS_UPDATE;
       break;
 
       break;
 
-    case ACCESS_WRITE:
-      if (volume_label_option)
-       {
-         memset (record_start, 0, BLOCKSIZE);
-         if (multi_volume_option)
-           sprintf (record_start->header.name, "%s Volume 1",
-                    volume_label_option);
-         else
-           strcpy (record_start->header.name, volume_label_option);
-
-         assign_string (&current_file_name, record_start->header.name);
-
-         record_start->header.typeflag = GNUTYPE_VOLHDR;
-         TIME_TO_CHARS (start_time, record_start->header.mtime);
-         finish_header (record_start);
-#if 0
-         current_block++;
-#endif
-       }
+    default:
+      acc = ACCESS_READ;
       break;
     }
       break;
     }
-}
 
 
-/*--------------------------------------.
-| Perform a write to flush the buffer.  |
-`--------------------------------------*/
+  if (!new_volume (acc))
+    return true;
+  
+  while ((status = rmtread (archive, record_start->buffer, record_size))
+        == SAFE_READ_ERROR)
+    archive_read_error ();
 
 
-void
-flush_write (void)
-{
-  int copy_back;
-  ssize_t status;
+  if (status != record_size)
+    short_read (status);
 
 
-  if (checkpoint_option && !(++checkpoint % 10))
-    WARN ((0, 0, _("Write checkpoint %d"), checkpoint));
+  header = find_next_block ();
+  if (!header)
+    return false;
 
 
-  if (tape_length_option && tape_length_option <= bytes_written)
+  switch (header->header.typeflag)
     {
     {
-      errno = ENOSPC;
-      status = 0;
-    }
-  else if (dev_null_output)
-    status = record_size;
-  else
-    status = write_archive_buffer ();
-  if (status != record_size && !multi_volume_option)
-    write_error (status);
+    case XGLTYPE:
+      {
+       if (!read_header0 (&dummy))
+         return false;
+       xheader_decode (&dummy); /* decodes values from the global header */
+       tar_stat_destroy (&dummy);
+       if (!real_s_name)
+         {
+           /* We have read the extended header of the first member in
+              this volume. Put it back, so next read_header works as
+              expected. */
+           current_block = record_start;
+         }
+       break;
+      }
 
 
-  if (status > 0)
-    bytes_written += status;
+    case GNUTYPE_VOLHDR:
+      if (!read_header0 (&dummy))
+       return false;
+      tar_stat_destroy (&dummy);
+      assign_string (&volume_label, current_header->header.name);
+      set_next_block_after (header);
+      header = find_next_block ();
+      if (header->header.typeflag != GNUTYPE_MULTIVOL)
+       break;
+      /* FALL THROUGH */
+
+    case GNUTYPE_MULTIVOL:
+      if (!read_header0 (&dummy))
+       return false;
+      tar_stat_destroy (&dummy);
+      assign_string (&continued_file_name, current_header->header.name);
+      continued_file_size =
+       UINTMAX_FROM_HEADER (current_header->header.size);
+      continued_file_offset =
+       UINTMAX_FROM_HEADER (current_header->oldgnu_header.offset);
+      break;
 
 
-  if (status == record_size)
+    default:
+      break;
+    }
+
+  if (real_s_name)
     {
     {
-      if (multi_volume_option)
+      uintmax_t s;
+      if (!continued_file_name
+         || strcmp (continued_file_name, real_s_name))
        {
        {
-         char *cursor;
-
-         if (!save_name)
+         if ((archive_format == GNU_FORMAT || archive_format == OLDGNU_FORMAT)
+             && strlen (real_s_name) >= NAME_FIELD_SIZE
+             && strncmp (continued_file_name, real_s_name,
+                         NAME_FIELD_SIZE) == 0)
+           WARN ((0, 0,
+ _("%s is possibly continued on this volume: header contains truncated name"),
+                  quote (real_s_name)));
+         else
            {
            {
-             real_s_name[0] = '\0';
-             real_s_totsize = 0;
-             real_s_sizeleft = 0;
-             return;
+             WARN ((0, 0, _("%s is not continued on this volume"),
+                    quote (real_s_name)));
+             return false;
            }
            }
+       }
 
 
-         cursor = save_name + FILESYSTEM_PREFIX_LEN (save_name);
-         while (*cursor == '/')
-           cursor++;
+      s = continued_file_size + continued_file_offset;
 
 
-         strcpy (real_s_name, cursor);
-         real_s_totsize = save_totsize;
-         real_s_sizeleft = save_sizeleft;
+      if (real_s_totsize != s || s < continued_file_offset)
+       {
+         char totsizebuf[UINTMAX_STRSIZE_BOUND];
+         char s1buf[UINTMAX_STRSIZE_BOUND];
+         char s2buf[UINTMAX_STRSIZE_BOUND];
+
+         WARN ((0, 0, _("%s is the wrong size (%s != %s + %s)"),
+                quote (continued_file_name),
+                STRINGIFY_BIGINT (save_totsize, totsizebuf),
+                STRINGIFY_BIGINT (continued_file_size, s1buf),
+                STRINGIFY_BIGINT (continued_file_offset, s2buf)));
+         return false;
+       }
+
+      if (real_s_totsize - real_s_sizeleft != continued_file_offset)
+       {
+         WARN ((0, 0, _("This volume is out of sequence")));
+         return false;
        }
        }
-      return;
     }
 
     }
 
-  /* We're multivol.  Panic if we didn't get the right kind of response.  */
+  increase_volume_number ();
+  return true;
+}
 
 
-  /* ENXIO is for the UNIX PC.  */
-  if (status < 0 && errno != ENOSPC && errno != EIO && errno != ENXIO)
-    write_error (status);
+\f
+/* Check the LABEL block against the volume label, seen as a globbing
+   pattern.  Return true if the pattern matches.  In case of failure,
+   retry matching a volume sequence number before giving up in
+   multi-volume mode.  */
+static bool
+check_label_pattern (union block *label)
+{
+  char *string;
+  bool result;
 
 
-  /* If error indicates a short write, we just move to the next tape.  */
+  if (! memchr (label->header.name, '\0', sizeof label->header.name))
+    return false;
 
 
-  if (!new_volume (ACCESS_WRITE))
-    return;
+  if (fnmatch (volume_label_option, label->header.name, 0) == 0)
+    return true;
 
 
-  if (totals_option)
-    prev_written += bytes_written;
-  bytes_written = 0;
+  if (!multi_volume_option)
+    return false;
 
 
-  if (volume_label_option && real_s_name[0])
-    {
-      copy_back = 2;
-      record_start -= 2;
-    }
-  else if (volume_label_option || real_s_name[0])
-    {
-      copy_back = 1;
-      record_start--;
-    }
-  else
-    copy_back = 0;
+  string = xmalloc (strlen (volume_label_option)
+                   + sizeof VOLUME_LABEL_APPEND + 1);
+  strcpy (string, volume_label_option);
+  strcat (string, VOLUME_LABEL_APPEND);
+  result = fnmatch (string, label->header.name, 0) == 0;
+  free (string);
+  return result;
+}
 
 
-  if (volume_label_option)
-    {
-      memset (record_start, 0, BLOCKSIZE);
-      sprintf (record_start->header.name, "%s Volume %d", volume_label_option, volno);
-      TIME_TO_CHARS (start_time, record_start->header.mtime);
-      record_start->header.typeflag = GNUTYPE_VOLHDR;
-      finish_header (record_start);
-    }
+/* Check if the next block contains a volume label and if this matches
+   the one given in the command line */
+static void
+match_volume_label (void)
+{
+  union block *label = find_next_block ();
+
+  if (!label)
+    FATAL_ERROR ((0, 0, _("Archive not labeled to match %s"),
+                 quote (volume_label_option)));
+  if (!check_label_pattern (label))
+    FATAL_ERROR ((0, 0, _("Volume %s does not match %s"),
+                 quote_n (0, label->header.name),
+                 quote_n (1, volume_label_option)));
+}
 
 
-  if (real_s_name[0])
+/* Mark the archive with volume label STR. */
+static void
+_write_volume_label (const char *str)
+{
+  if (archive_format == POSIX_FORMAT)
+    xheader_store ("GNU.volume.label", &dummy, str);
+  else
     {
     {
-      int tmp;
+      union block *label = find_next_block ();
 
 
-      if (volume_label_option)
-       record_start++;
+      memset (label, 0, BLOCKSIZE);
 
 
-      memset (record_start, 0, BLOCKSIZE);
+      strcpy (label->header.name, volume_label_option);
+      assign_string (&current_stat_info.file_name,
+                    label->header.name);
+      current_stat_info.had_trailing_slash =
+       strip_trailing_slashes (current_stat_info.file_name);
 
 
-      /* FIXME: Michael P Urban writes: [a long name file] is being written
-        when a new volume rolls around [...]  Looks like the wrong value is
-        being preserved in real_s_name, though.  */
-
-      strcpy (record_start->header.name, real_s_name);
-      record_start->header.typeflag = GNUTYPE_MULTIVOL;
-      OFF_TO_CHARS (real_s_sizeleft, record_start->header.size);
-      OFF_TO_CHARS (real_s_totsize - real_s_sizeleft, 
-                   record_start->oldgnu_header.offset);
-      tmp = verbose_option;
-      verbose_option = 0;
-      finish_header (record_start);
-      verbose_option = tmp;
-
-      if (volume_label_option)
-       record_start--;
+      label->header.typeflag = GNUTYPE_VOLHDR;
+      TIME_TO_CHARS (start_time.tv_sec, label->header.mtime);
+      finish_header (&current_stat_info, label, -1);
+      set_next_block_after (label);
     }
     }
+}
 
 
-  status = write_archive_buffer ();
-  if (status != record_size)
-    write_error (status);
+#define VOL_SUFFIX "Volume"
 
 
-  bytes_written += status;
+/* Add a volume label to a part of multi-volume archive */
+static void
+add_volume_label (void)
+{
+  char buf[UINTMAX_STRSIZE_BOUND];
+  char *p = STRINGIFY_BIGINT (volno, buf);
+  char *s = xmalloc (strlen (volume_label_option) + sizeof VOL_SUFFIX
+                    + strlen (p) + 2);
+  sprintf (s, "%s %s %s", volume_label_option, VOL_SUFFIX, p);
+  _write_volume_label (s);
+  free (s);
+}
 
 
-  if (copy_back)
+static void
+add_chunk_header ()
+{
+  if (archive_format == POSIX_FORMAT)
     {
     {
-      record_start += copy_back;
-      memcpy (current_block,
-             record_start + blocking_factor - copy_back,
-             copy_back * BLOCKSIZE);
-      current_block += copy_back;
-
-      if (real_s_sizeleft >= copy_back * BLOCKSIZE)
-       real_s_sizeleft -= copy_back * BLOCKSIZE;
-      else if ((real_s_sizeleft + BLOCKSIZE - 1) / BLOCKSIZE <= copy_back)
-       real_s_name[0] = '\0';
-      else
-       {
-         char *cursor = save_name + FILESYSTEM_PREFIX_LEN (save_name);
-
-         while (*cursor == '/')
-           cursor++;
-
-         strcpy (real_s_name, cursor);
-         real_s_sizeleft = save_sizeleft;
-         real_s_totsize = save_totsize;
-       }
-      copy_back = 0;
+      off_t block_ordinal;
+      union block *blk;
+      struct tar_stat_info st;
+      static size_t real_s_part_no; /* FIXME */
+
+      real_s_part_no++;
+      memset (&st, 0, sizeof st);
+      st.orig_file_name = st.file_name = real_s_name;
+      st.stat.st_mode = S_IFREG|S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH;
+      st.stat.st_uid = getuid ();
+      st.stat.st_gid = getgid ();
+      st.orig_file_name = xheader_format_name (&st,
+                                              "%d/GNUFileParts.%p/%f.%n",
+                                              real_s_part_no);
+      st.file_name = st.orig_file_name;
+      st.archive_file_size = st.stat.st_size = real_s_sizeleft;
+
+      block_ordinal = current_block_ordinal ();
+      blk = start_header (&st);
+      if (!blk)
+       abort (); /* FIXME */
+      finish_header (&st, blk, block_ordinal);
+      free (st.orig_file_name);
     }
 }
 
     }
 }
 
-/*---------------------------------------------------------------------.
-| Handle write errors on the archive.  Write errors are always fatal.  |
-| Hitting the end of a volume does not cause a write error unless the  |
-| write was the first record of the volume.                           |
-`---------------------------------------------------------------------*/
 
 
+/* Add a volume label to the current archive */
 static void
 static void
-write_error (ssize_t status)
+write_volume_label (void)
 {
 {
-  int saved_errno = errno;
-
-  /* It might be useful to know how much was written before the error
-     occurred.  */
-  if (totals_option)
-    print_total_written ();
-
-  if (status < 0)
-    FATAL_ERROR ((0, saved_errno, _("Cannot write to %s"),
-                 *archive_name_cursor));
+  if (multi_volume_option)
+    add_volume_label ();
   else
   else
-    FATAL_ERROR ((0, 0, _("Only wrote %lu of %lu bytes to %s"),
-                 (unsigned long) status, (unsigned long) record_size,
-                 *archive_name_cursor));
+    _write_volume_label (volume_label_option);
 }
 
 }
 
-/*-------------------------------------------------------------------.
-| Handle read errors on the archive.  If the read should be retried, |
-| returns to the caller.                                            |
-`-------------------------------------------------------------------*/
-
+/* Write GNU multi-volume header */
 static void
 static void
-read_error (void)
+gnu_add_multi_volume_header (void)
 {
 {
-  ERROR ((0, errno, _("Read error on %s"), *archive_name_cursor));
+  int tmp;
+  union block *block = find_next_block ();
 
 
-  if (record_start_block == 0)
-    FATAL_ERROR ((0, 0, _("At beginning of tape, quitting now")));
-
-  /* Read error in mid archive.  We retry up to READ_ERROR_MAX times and
-     then give up on reading the archive.  */
-
-  if (read_error_count++ > READ_ERROR_MAX)
-    FATAL_ERROR ((0, 0, _("Too many errors, quitting")));
-  return;
-}
+  if (strlen (real_s_name) > NAME_FIELD_SIZE)
+    WARN ((0, 0,
+          _("%s: file name too long to be stored in a GNU multivolume header, truncated"),
+          quotearg_colon (real_s_name)));
 
 
-/*-------------------------------------.
-| Perform a read to flush the buffer.  |
-`-------------------------------------*/
+  memset (block, 0, BLOCKSIZE);
 
 
-void
-flush_read (void)
-{
-  ssize_t status;              /* result from system call */
-  size_t left;                 /* bytes left */
-  char *more;                  /* pointer to next byte to read */
+  /* FIXME: Michael P Urban writes: [a long name file] is being written
+     when a new volume rolls around [...]  Looks like the wrong value is
+     being preserved in real_s_name, though.  */
 
 
-  if (checkpoint_option && !(++checkpoint % 10))
-    WARN ((0, 0, _("Read checkpoint %d"), checkpoint));
+  strncpy (block->header.name, real_s_name, NAME_FIELD_SIZE);
+  block->header.typeflag = GNUTYPE_MULTIVOL;
 
 
-  /* Clear the count of errors.  This only applies to a single call to
-     flush_read.  */
+  OFF_TO_CHARS (real_s_sizeleft, block->header.size);
+  OFF_TO_CHARS (real_s_totsize - real_s_sizeleft,
+               block->oldgnu_header.offset);
 
 
-  read_error_count = 0;                /* clear error count */
+  tmp = verbose_option;
+  verbose_option = 0;
+  finish_header (&current_stat_info, block, -1);
+  verbose_option = tmp;
+  set_next_block_after (block);
+}
 
 
-  if (write_archive_to_stdout && record_start_block != 0)
+/* Add a multi volume header to the current archive. The exact header format
+   depends on the archive format. */
+static void
+add_multi_volume_header (void)
+{
+  if (archive_format == POSIX_FORMAT)
     {
     {
-      status = write_archive_buffer ();
-      if (status != record_size)
-       write_error (status);
+      off_t d = real_s_totsize - real_s_sizeleft;
+      xheader_store ("GNU.volume.filename", &dummy, real_s_name);
+      xheader_store ("GNU.volume.size", &dummy, &real_s_sizeleft);
+      xheader_store ("GNU.volume.offset", &dummy, &d);
     }
     }
+  else
+    gnu_add_multi_volume_header ();
+}
+
+/* Synchronize multi-volume globals */
+static void
+multi_volume_sync ()
+{
   if (multi_volume_option)
     {
       if (save_name)
        {
   if (multi_volume_option)
     {
       if (save_name)
        {
-         char *cursor = save_name + FILESYSTEM_PREFIX_LEN (save_name);
-
-         while (*cursor == '/')
-           cursor++;
-
-         strcpy (real_s_name, cursor);
-         real_s_sizeleft = save_sizeleft;
+         assign_string (&real_s_name,
+                        safer_name_suffix (save_name, false,
+                                           absolute_names_option));
          real_s_totsize = save_totsize;
          real_s_totsize = save_totsize;
+         real_s_sizeleft = save_sizeleft;
        }
       else
        {
        }
       else
        {
-         real_s_name[0] = '\0';
+         assign_string (&real_s_name, 0);
          real_s_totsize = 0;
          real_s_sizeleft = 0;
        }
     }
          real_s_totsize = 0;
          real_s_sizeleft = 0;
        }
     }
+}
 
 
- error_loop:
-  status = rmtread (archive, record_start->buffer, record_size);
-  if (status == record_size)
-    return;
-
-  if ((status == 0
-       || (status < 0 && errno == ENOSPC)
-       || (status > 0 && !read_full_records_option))
-      && multi_volume_option)
-    {
-      union block *cursor;
-
-    try_volume:
-      switch (subcommand_option)
-       {
-       case APPEND_SUBCOMMAND:
-       case CAT_SUBCOMMAND:
-       case UPDATE_SUBCOMMAND:
-         if (!new_volume (ACCESS_UPDATE))
-           return;
-         break;
-
-       default:
-         if (!new_volume (ACCESS_READ))
-           return;
-         break;
-       }
+\f
+/* Low-level flush functions */
 
 
-    vol_error:
-      status = rmtread (archive, record_start->buffer, record_size);
-      if (status < 0)
-       {
-         read_error ();
-         goto vol_error;
-       }
-      if (status != record_size)
-       goto short_read;
+/* Simple flush read (no multi-volume or label extensions) */
+static void
+simple_flush_read (void)
+{
+  size_t status;               /* result from system call */
 
 
-      cursor = record_start;
+  checkpoint_run (false);
+  
+  /* Clear the count of errors.  This only applies to a single call to
+     flush_read.  */
 
 
-      if (cursor->header.typeflag == GNUTYPE_VOLHDR)
-       {
-         if (volume_label_option)
-           {
-             if (!check_label_pattern (cursor))
-               {
-                 WARN ((0, 0, _("Volume `%s' does not match `%s'"),
-                        cursor->header.name, volume_label_option));
-                 volno--;
-                 global_volno--;
-                 goto try_volume;
-               }
-           }
-         if (verbose_option)
-           fprintf (stdlis, _("Reading %s\n"), cursor->header.name);
-         cursor++;
-       }
-      else if (volume_label_option)
-       WARN ((0, 0, _("WARNING: No volume header")));
+  read_error_count = 0;                /* clear error count */
 
 
-      if (real_s_name[0])
-       {
-         uintmax_t s1, s2;
-         if (cursor->header.typeflag != GNUTYPE_MULTIVOL
-             || strcmp (cursor->header.name, real_s_name))
-           {
-             WARN ((0, 0, _("%s is not continued on this volume"),
-                    real_s_name));
-             volno--;
-             global_volno--;
-             goto try_volume;
-           }
-         s1 = UINTMAX_FROM_HEADER (cursor->header.size);
-         s2 = UINTMAX_FROM_HEADER (cursor->oldgnu_header.offset);
-         if (real_s_totsize != s1 + s2 || s1 + s2 < s2)
-           {
-             char totsizebuf[UINTMAX_STRSIZE_BOUND];
-             char s1buf[UINTMAX_STRSIZE_BOUND];
-             char s2buf[UINTMAX_STRSIZE_BOUND];
-             
-             WARN ((0, 0, _("%s is the wrong size (%s != %s + %s)"),
-                    cursor->header.name,
-                    STRINGIFY_BIGINT (save_totsize, totsizebuf),
-                    STRINGIFY_BIGINT (s1, s1buf),
-                    STRINGIFY_BIGINT (s2, s2buf)));
-             volno--;
-             global_volno--;
-             goto try_volume;
-           }
-         if (real_s_totsize - real_s_sizeleft
-             != OFF_FROM_HEADER (cursor->oldgnu_header.offset))
-           {
-             WARN ((0, 0, _("This volume is out of sequence")));
-             volno--;
-             global_volno--;
-             goto try_volume;
-           }
-         cursor++;
-       }
-      current_block = cursor;
-      return;
-    }
-  else if (status < 0)
+  if (write_archive_to_stdout && record_start_block != 0)
     {
     {
-      read_error ();
-      goto error_loop;         /* try again */
+      archive = STDOUT_FILENO;
+      status = sys_write_archive_buffer ();
+      archive = STDIN_FILENO;
+      if (status != record_size)
+       archive_write_error (status);
     }
 
     }
 
- short_read:
-  more = record_start->buffer + status;
-  left = record_size - status;
-
-  while (left % BLOCKSIZE != 0)
+  for (;;)
     {
     {
-      while ((status = rmtread (archive, more, left)) < 0)
-       read_error ();
-
-      if (status == 0)
+      status = rmtread (archive, record_start->buffer, record_size);
+      if (status == record_size)
        {
        {
-         ERROR ((0, 0, _("%d garbage bytes ignored at end of archive"),
-                 (int) ((record_size - left) % BLOCKSIZE)));
-         break;
+         records_read++;
+         return;
        }
        }
-
-      if (! read_full_records_option)
-       FATAL_ERROR ((0, 0, _("Unaligned block (%lu bytes) in archive"),
-                     (unsigned long) (record_size - left)));
-         
-      /* User warned us about this.  Fix up.  */
-
-      left -= status;
-      more += status;
-    }
-
-  /* FIXME: for size=0, multi-volume support.  On the first record, warn
-     about the problem.  */
-
-  if (!read_full_records_option && verbose_option
-      && record_start_block == 0 && status > 0)
-    WARN ((0, 0, _("Record size = %lu blocks"),
-          (unsigned long) ((record_size - left) / BLOCKSIZE)));
-
-  record_end = record_start + (record_size - left) / BLOCKSIZE;
-}
-
-/*-----------------------------------------------.
-| Flush the current buffer to/from the archive.         |
-`-----------------------------------------------*/
-
-void
-flush_archive (void)
-{
-  record_start_block += record_end - record_start;
-  current_block = record_start;
-  record_end = record_start + blocking_factor;
-
-  if (access_mode == ACCESS_READ && time_to_start_writing)
-    {
-      access_mode = ACCESS_WRITE;
-      time_to_start_writing = 0;
-
-      if (file_to_switch_to >= 0)
+      if (status == SAFE_READ_ERROR)
        {
        {
-         int status = rmtclose (archive);
-
-         if (status < 0)
-           WARN ((0, errno, _("WARNING: Cannot close %s (%d, %d)"),
-                  *archive_name_cursor, archive, status));
-
-         archive = file_to_switch_to;
+         archive_read_error ();
+         continue;             /* try again */
        }
        }
-      else
-       backspace_output ();
-    }
-
-  switch (access_mode)
-    {
-    case ACCESS_READ:
-      flush_read ();
       break;
       break;
-
-    case ACCESS_WRITE:
-      flush_write ();
-      break;
-
-    case ACCESS_UPDATE:
-      abort ();
     }
     }
+  short_read (status);
 }
 
 }
 
-/*-------------------------------------------------------------------------.
-| Backspace the archive descriptor by one record worth.  If its a tape,           |
-| MTIOCTOP will work.  If its something else, we try to seek on it.  If we |
-| can't seek, we lose!                                                    |
-`-------------------------------------------------------------------------*/
-
+/* Simple flush write (no multi-volume or label extensions) */
 static void
 static void
-backspace_output (void)
+simple_flush_write (size_t level __attribute__((unused)))
 {
 {
-#ifdef MTIOCTOP
-  {
-    struct mtop operation;
-
-    operation.mt_op = MTBSR;
-    operation.mt_count = 1;
-    if (rmtioctl (archive, MTIOCTOP, (char *) &operation) >= 0)
-      return;
-    if (errno == EIO && rmtioctl (archive, MTIOCTOP, (char *) &operation) >= 0)
-      return;
-  }
-#endif
-
-  {
-    off_t position = rmtlseek (archive, (off_t) 0, SEEK_CUR);
-
-    /* Seek back to the beginning of this record and start writing there.  */
-
-    position -= record_size;
-    if (rmtlseek (archive, position, SEEK_SET) != position)
-      {
-       /* Lseek failed.  Try a different method.  */
-
-       WARN ((0, 0,
-              _("Could not backspace archive file; it may be unreadable without -i")));
-
-       /* Replace the first part of the record with NULs.  */
+  ssize_t status;
 
 
-       if (record_start->buffer != output_start)
-         memset (record_start->buffer, 0,
-                 output_start - record_start->buffer);
-      }
-  }
+  status = _flush_write ();
+  if (status != record_size)
+    archive_write_error (status);
+  else
+    {
+      records_written++;
+      bytes_written += status;
+    }
 }
 
 }
 
-/*-------------------------.
-| Close the archive file.  |
-`-------------------------*/
+\f
+/* GNU flush functions. These support multi-volume and archive labels in
+   GNU and PAX archive formats. */
 
 
-void
-close_archive (void)
+static void
+_gnu_flush_read (void)
 {
 {
-  if (time_to_start_writing || access_mode == ACCESS_WRITE)
-    flush_archive ();
-
-#if !MSDOS
+  size_t status;               /* result from system call */
 
 
-  /* Manage to fully drain a pipe we might be reading, so to not break it on
-     the producer after the EOF block.  FIXME: one of these days, GNU tar
-     might become clever enough to just stop working, once there is no more
-     work to do, we might have to revise this area in such time.  */
+  checkpoint_run (false);
+  
+  /* Clear the count of errors.  This only applies to a single call to
+     flush_read.  */
 
 
-  if (access_mode == ACCESS_READ
-      && ! _isrmt (archive)
-      && S_ISFIFO (archive_stat.st_mode))
-    while (rmtread (archive, record_start->buffer, record_size) > 0)
-      continue;
-#endif
+  read_error_count = 0;                /* clear error count */
 
 
-  if (! _isrmt (archive) && subcommand_option == DELETE_SUBCOMMAND)
+  if (write_archive_to_stdout && record_start_block != 0)
     {
     {
-#if MSDOS
-      int status = write (archive, "", 0);
-#else
-      off_t pos = lseek (archive, (off_t) 0, SEEK_CUR);
-      int status = pos < 0 ? -1 : ftruncate (archive, pos);
-#endif
-      if (status != 0)
-       WARN ((0, errno, _("WARNING: Cannot truncate %s"),
-              *archive_name_cursor));
+      archive = STDOUT_FILENO;
+      status = sys_write_archive_buffer ();
+      archive = STDIN_FILENO;
+      if (status != record_size)
+       archive_write_error (status);
     }
     }
-  if (verify_option)
-    verify_volume ();
-
-  {
-    int status = rmtclose (archive);
-
-    if (status < 0)
-      WARN ((0, errno, _("WARNING: Cannot close %s (%d, %d)"),
-            *archive_name_cursor, archive, status));
-  }
 
 
-#if !MSDOS
+  multi_volume_sync ();
 
 
-  if (child_pid)
+  for (;;)
     {
     {
-      int wait_status;
-
-      while (waitpid (child_pid, &wait_status, 0) == -1)
-       if (errno != EINTR)
-         {
-           ERROR ((0, errno, _("While waiting for child")));
-           break;
-         }
+      status = rmtread (archive, record_start->buffer, record_size);
+      if (status == record_size)
+       {
+         records_read++;
+         return;
+       }
 
 
-      if (WIFSIGNALED (wait_status))
+      /* The condition below used to include
+             || (status > 0 && !read_full_records)
+        This is incorrect since even if new_volume() succeeds, the
+        subsequent call to rmtread will overwrite the chunk of data
+        already read in the buffer, so the processing will fail */
+      if ((status == 0
+          || (status == SAFE_READ_ERROR && errno == ENOSPC))
+         && multi_volume_option)
        {
        {
-         /* SIGPIPE is OK, everything else is a problem.  */
-         
-         if (WTERMSIG (wait_status) != SIGPIPE)
-           ERROR ((0, 0, _("Child died with signal %d"),
-                   WTERMSIG (wait_status)));
+         while (!try_new_volume ())
+           ;
+         return;
        }
        }
-      else
+      else if (status == SAFE_READ_ERROR)
        {
        {
-         /* Child voluntarily terminated -- but why?  /bin/sh returns
-            SIGPIPE + 128 if its child, then do nothing.  */
-             
-         if (WEXITSTATUS (wait_status)
-             && WEXITSTATUS (wait_status) != (SIGPIPE + 128))
-           ERROR ((0, 0, _("Child returned status %d"),
-                   WEXITSTATUS (wait_status)));
+         archive_read_error ();
+         continue;
        }
        }
+      break;
     }
     }
-#endif /* !MSDOS */
-
-  if (current_file_name)
-    free (current_file_name);
-  if (current_link_name)
-    free (current_link_name);
-  if (save_name)
-    free (save_name);
-  free (multi_volume_option ? record_start - 2 : record_start);
+  short_read (status);
 }
 
 }
 
-/*------------------------------------------------.
-| Called to initialize the global volume number.  |
-`------------------------------------------------*/
-
-void
-init_volume_number (void)
+static void
+gnu_flush_read (void)
 {
 {
-  FILE *file = fopen (volno_file_option, "r");
-
-  if (file)
-    {
-      fscanf (file, "%d", &global_volno);
-      if (fclose (file) == EOF)
-       ERROR ((0, errno, "%s", volno_file_option));
-    }
-  else if (errno != ENOENT)
-    ERROR ((0, errno, "%s", volno_file_option));
+  flush_read_ptr = simple_flush_read; /* Avoid recursion */
+  _gnu_flush_read ();
+  flush_read_ptr = gnu_flush_read;
 }
 
 }
 
-/*-------------------------------------------------------.
-| Called to write out the closing global volume number.         |
-`-------------------------------------------------------*/
-
-void
-closeout_volume_number (void)
+static void
+_gnu_flush_write (size_t buffer_level)
 {
 {
-  FILE *file = fopen (volno_file_option, "w");
+  ssize_t status;
+  union block *header;
+  char *copy_ptr;
+  size_t copy_size;
+  size_t bufsize;
 
 
-  if (file)
-    {
-      fprintf (file, "%d\n", global_volno);
-      if (fclose (file) == EOF)
-       ERROR ((0, errno, "%s", volno_file_option));
-    }
+  status = _flush_write ();
+  if (status != record_size && !multi_volume_option)
+    archive_write_error (status);
   else
   else
-    ERROR ((0, errno, "%s", volno_file_option));
-}
-
-/*-----------------------------------------------------------------------.
-| We've hit the end of the old volume.  Close it and open the next one.         |
-| Return nonzero on success.                                            |
-`-----------------------------------------------------------------------*/
-
-static int
-new_volume (enum access_mode access)
-{
-  static FILE *read_file;
-  static int looped;
-
-  int status;
-
-  if (!read_file && !info_script_option)
-    /* FIXME: if fopen is used, it will never be closed.  */
-    read_file = archive == STDIN_FILENO ? fopen (TTY_NAME, "r") : stdin;
-
-  if (now_verifying)
-    return 0;
-  if (verify_option)
-    verify_volume ();
-
-  if (status = rmtclose (archive), status < 0)
-    WARN ((0, errno, _("WARNING: Cannot close %s (%d, %d)"),
-          *archive_name_cursor, archive, status));
-
-  global_volno++;
-  volno++;
-  archive_name_cursor++;
-  if (archive_name_cursor == archive_name_array + archive_names)
     {
     {
-      archive_name_cursor = archive_name_array;
-      looped = 1;
+      records_written++;
+      bytes_written += status;
     }
 
     }
 
- tryagain:
-  if (looped)
+  if (status == record_size)
     {
     {
-      /* We have to prompt from now on.  */
+      multi_volume_sync ();
+      return;
+    }
 
 
-      if (info_script_option)
-       {
-         if (volno_file_option)
-           closeout_volume_number ();
-         system (info_script_option);
-       }
-      else
-       while (1)
-         {
-           char input_buffer[80];
+  /* In multi-volume mode. */
+  /* ENXIO is for the UNIX PC.  */
+  if (status < 0 && errno != ENOSPC && errno != EIO && errno != ENXIO)
+    archive_write_error (status);
 
 
-           fputc ('\007', stderr);
-           fprintf (stderr,
-                    _("Prepare volume #%d for %s and hit return: "),
-                    global_volno, *archive_name_cursor);
-           fflush (stderr);
+  if (!new_volume (ACCESS_WRITE))
+    return;
 
 
-           if (fgets (input_buffer, sizeof input_buffer, read_file) == 0)
-             {
-               WARN ((0, 0, _("EOF where user reply was expected")));
+  tar_stat_destroy (&dummy);
 
 
-               if (subcommand_option != EXTRACT_SUBCOMMAND
-                   && subcommand_option != LIST_SUBCOMMAND
-                   && subcommand_option != DIFF_SUBCOMMAND)
-                 WARN ((0, 0, _("WARNING: Archive is incomplete")));
+  increase_volume_number ();
+  prev_written += bytes_written;
+  bytes_written = 0;
 
 
-               apply_delayed_set_stat ();
-               exit (TAREXIT_FAILURE);
-             }
-           if (input_buffer[0] == '\n'
-               || input_buffer[0] == 'y'
-               || input_buffer[0] == 'Y')
-             break;
+  copy_ptr = record_start->buffer + status;
+  copy_size = buffer_level - status;
+  /* Switch to the next buffer */
+  record_index = !record_index;
+  init_buffer ();
 
 
-           switch (input_buffer[0])
-             {
-             case '?':
-               {
-                 fprintf (stderr, _("\
- n [name]   Give a new file name for the next (and subsequent) volume(s)\n\
- q          Abort tar\n\
- !          Spawn a subshell\n\
- ?          Print this list\n"));
-               }
-               break;
-
-             case 'q':
-               /* Quit.  */
-
-               WARN ((0, 0, _("No new volume; exiting.\n")));
-
-               if (subcommand_option != EXTRACT_SUBCOMMAND
-                   && subcommand_option != LIST_SUBCOMMAND
-                   && subcommand_option != DIFF_SUBCOMMAND)
-                 WARN ((0, 0, _("WARNING: Archive is incomplete")));
-
-               apply_delayed_set_stat ();
-               exit (TAREXIT_FAILURE);
-
-             case 'n':
-               /* Get new file name.  */
-
-               {
-                 char *name = &input_buffer[1];
-                 char *cursor;
-
-                 while (*name == ' ' || *name == '\t')
-                   name++;
-                 cursor = name;
-                 while (*cursor && *cursor != '\n')
-                   cursor++;
-                 *cursor = '\0';
-
-                 /* FIXME: the following allocation is never reclaimed.  */
-                 *archive_name_cursor = xstrdup (name);
-               }
-               break;
-
-             case '!':
-#if MSDOS
-               spawnl (P_WAIT, getenv ("COMSPEC"), "-", 0);
-#else /* not MSDOS */
-               {
-                 pid_t child = fork ();
-                 switch (child)
-                   {
-                   case -1:
-                     WARN ((0, errno, _("Cannot fork!")));
-                     break;
-
-                   case 0:
-                     {
-                       const char *shell = getenv ("SHELL");
-                       
-                       if (! shell)
-                         shell = "/bin/sh";
-                       execlp (shell, "-sh", "-i", 0);
-                       FATAL_ERROR ((0, errno, _("Cannot exec a shell %s"),
-                                     shell));
-                     }
-
-                   default:
-                     {
-                       int wait_status;
-                       while (waitpid (child, &wait_status, 0) == -1)
-                         if (errno != EINTR)
-                           {
-                             ERROR ((0, errno,
-                                     _("While waiting for child")));
-                             break;
-                           }
-                     }
-                     break;
-                   }
-               }
-#endif /* not MSDOS */
-               break;
-             }
-         }
+  if (volume_label_option)
+    add_volume_label ();
+
+  if (real_s_name)
+    add_multi_volume_header ();
+
+  write_extended (true, &dummy, find_next_block ());
+  tar_stat_destroy (&dummy);
+  
+  if (real_s_name)
+    add_chunk_header ();
+  header = find_next_block ();
+  bufsize = available_space_after (header);
+  while (bufsize < copy_size)
+    {
+      memcpy (header->buffer, copy_ptr, bufsize);
+      copy_ptr += bufsize;
+      copy_size -= bufsize;
+      set_next_block_after (header + (bufsize - 1) / BLOCKSIZE);
+      header = find_next_block ();
+      bufsize = available_space_after (header);
     }
     }
+  memcpy (header->buffer, copy_ptr, copy_size);
+  memset (header->buffer + copy_size, 0, bufsize - copy_size);
+  set_next_block_after (header + (copy_size - 1) / BLOCKSIZE);
+  find_next_block ();
+}
 
 
-  if (verify_option)
-    archive = rmtopen (*archive_name_cursor, O_RDWR | O_CREAT, MODE_RW,
-                      rsh_command_option);
-  else
-    switch (access)
-      {
-      case ACCESS_READ:
-       archive = rmtopen (*archive_name_cursor, O_RDONLY, MODE_RW,
-                          rsh_command_option);
-       break;
+static void
+gnu_flush_write (size_t buffer_level)
+{
+  flush_write_ptr = simple_flush_write; /* Avoid recursion */
+  _gnu_flush_write (buffer_level);
+  flush_write_ptr = gnu_flush_write;
+}
 
 
-      case ACCESS_WRITE:
-       if (backup_option)
-         maybe_backup_file (*archive_name_cursor, 1);
-       archive = rmtcreat (*archive_name_cursor, MODE_RW,
-                           rsh_command_option);
-       break;
+void
+flush_read ()
+{
+  flush_read_ptr ();
+}
 
 
-      case ACCESS_UPDATE:
-       archive = rmtopen (*archive_name_cursor, O_RDWR | O_CREAT, MODE_RW,
-                          rsh_command_option);
-       break;
-      }
+void
+flush_write ()
+{
+  flush_write_ptr (record_size);
+}
 
 
-  if (archive < 0)
+void
+open_archive (enum access_mode wanted_access)
+{
+  flush_read_ptr = gnu_flush_read;
+  flush_write_ptr = gnu_flush_write;
+
+  _open_archive (wanted_access);
+  switch (wanted_access)
     {
     {
-      WARN ((0, errno, _("Cannot open %s"), *archive_name_cursor));
-      if (!verify_option && access == ACCESS_WRITE && backup_option)
-       undo_last_backup ();
-      goto tryagain;
-    }
+    case ACCESS_READ:
+      if (volume_label_option)
+       match_volume_label ();
+      break;
 
 
-#if MSDOS
-  setmode (archive, O_BINARY);
-#endif
+    case ACCESS_WRITE:
+      records_written = 0;
+      if (volume_label_option)
+       write_volume_label ();
+      break;
 
 
-  return 1;
+    default:
+      break;
+    }
+  set_volume_start_time ();
 }
 }
This page took 0.080406 seconds and 4 git commands to generate.