+@node checkpoints
+@section Checkpoints
+@cindex checkpoints, defined
+@opindex checkpoint
+@opindex checkpoint-action
+
+A @dfn{checkpoint} is a moment of time before writing @var{n}th record to
+the archive (a @dfn{write checkpoint}), or before reading @var{n}th record
+from the archive (a @dfn{read checkpoint}). Checkpoints allow to
+periodically execute arbitrary actions.
+
+The checkpoint facility is enabled using the following option:
+
+@table @option
+@xopindex{checkpoint, defined}
+@item --checkpoint[=@var{n}]
+Schedule checkpoints before writing or reading each @var{n}th record.
+The default value for @var{n} is 10.
+@end table
+
+A list of arbitrary @dfn{actions} can be executed at each checkpoint.
+These actions include: pausing, displaying textual messages, and
+executing arbitrary external programs. Actions are defined using
+the @option{--checkpoint-action} option.
+
+@table @option
+@xopindex{checkpoint-action, defined}
+@item --checkpoint-action=@var{action}
+Execute an @var{action} at each checkpoint.
+@end table
+
+@cindex @code{echo}, checkpoint action
+The simplest value of @var{action} is @samp{echo}. It instructs
+@command{tar} to display the default message on the standard error
+stream upon arriving at each checkpoint. The default message is (in
+@acronym{POSIX} locale) @samp{Write checkpoint @var{n}}, for write
+checkpoints, and @samp{Read checkpoint @var{n}}, for read checkpoints.
+Here, @var{n} represents ordinal number of the checkpoint.
+
+In another locales, translated versions of this message are used.
+
+This is the default action, so running:
+
+@smallexample
+$ @kbd{tar -c --checkpoint=1000 --checkpoint-action=echo} /var
+@end smallexample
+
+@noindent
+is equivalent to:
+
+@smallexample
+$ @kbd{tar -c --checkpoint=1000} /var
+@end smallexample
+
+The @samp{echo} action also allows to supply a customized message.
+You do so by placing an equals sign and the message right after it,
+e.g.:
+
+@smallexample
+--checkpoint-action="echo=Hit %s checkpoint #%u"
+@end smallexample
+
+The @samp{%s} and @samp{%u} in the above example are
+@dfn{meta-characters}. The @samp{%s} meta-character is replaced with
+the @dfn{type} of the checkpoint: @samp{write} or
+@samp{read} (or a corresponding translated version in locales other
+than @acronym{POSIX}). The @samp{%u} meta-character is replaced with
+the ordinal number of the checkpoint. Thus, the above example could
+produce the following output when used with the @option{--create}
+option:
+
+@smallexample
+tar: Hit write checkpoint #10
+tar: Hit write checkpoint #20
+tar: Hit write checkpoint #30
+@end smallexample
+
+Aside from meta-character expansion, the message string is subject to
+@dfn{unquoting}, during which the backslash @dfn{escape sequences} are
+replaced with their corresponding @acronym{ASCII} characters
+(@pxref{escape sequences}). E.g. the following action will produce an
+audible bell and the message described above at each checkpoint:
+
+@smallexample
+--checkpoint-action='echo=\aHit %s checkpoint #%u'
+@end smallexample
+
+@cindex @code{bell}, checkpoint action
+There is also a special action which produces an audible signal:
+@samp{bell}. It is not equivalent to @samp{echo='\a'}, because
+@samp{bell} sends the bell directly to the console (@file{/dev/tty}),
+whereas @samp{echo='\a'} sends it to the standard error.
+
+@cindex @code{ttyout}, checkpoint action
+The @samp{ttyout=@var{string}} action outputs @var{string} to
+@file{/dev/tty}, so it can be used even if the standard output is
+redirected elsewhere. The @var{string} is subject to the same
+modifications as with @samp{echo} action. In contrast to the latter,
+@samp{ttyout} does not prepend @command{tar} executable name to the
+string, nor does it output a newline after it. For example, the
+following action will print the checkpoint message at the same screen
+line, overwriting any previous message:
+
+@smallexample
+--checkpoint-action="ttyout=\rHit %s checkpoint #%u"
+@end smallexample
+
+@cindex @code{dot}, checkpoint action
+Another available checkpoint action is @samp{dot} (or @samp{.}). It
+instructs @command{tar} to print a single dot on the standard listing
+stream, e.g.:
+
+@smallexample
+$ @kbd{tar -c --checkpoint=1000 --checkpoint-action=dot} /var
+...
+@end smallexample
+
+For compatibility with previous @GNUTAR{} versions, this action can
+be abbreviated by placing a dot in front of the checkpoint frequency,
+as shown in the previous section.
+
+@cindex @code{sleep}, checkpoint action
+Yet another action, @samp{sleep}, pauses @command{tar} for a specified
+amount of seconds. The following example will stop for 30 seconds at each
+checkpoint:
+
+@smallexample
+$ @kbd{tar -c --checkpoint=1000 --checkpoint-action=sleep=30}
+@end smallexample
+
+@cindex @code{exec}, checkpoint action
+Finally, the @code{exec} action executes a given external program.
+For example:
+
+@smallexample
+$ @kbd{tar -c --checkpoint=1000 --checkpoint-action=exec=/sbin/cpoint}
+@end smallexample
+
+This program is executed using @command{/bin/sh -c}, with no
+additional arguments. Its exit code is ignored. It gets a copy of
+@command{tar}'s environment plus the following variables:
+
+@table @env
+@vrindex TAR_VERSION, checkpoint script environment
+@item TAR_VERSION
+@GNUTAR{} version number.
+
+@vrindex TAR_ARCHIVE, checkpoint script environment
+@item TAR_ARCHIVE
+The name of the archive @command{tar} is processing.
+
+@vrindex TAR_BLOCKING_FACTOR, checkpoint script environment
+@item TAR_BLOCKING_FACTOR
+Current blocking factor (@pxref{Blocking}.
+
+@vrindex TAR_CHECKPOINT, checkpoint script environment
+@item TAR_CHECKPOINT
+The checkpoint number.
+
+@vrindex TAR_SUBCOMMAND, checkpoint script environment
+@item TAR_SUBCOMMAND
+A short option describing the operation @command{tar} is executing
+@xref{Operations}, for a complete list of subcommand options.
+
+@vrindex TAR_FORMAT, checkpoint script environment
+@item TAR_FORMAT
+Format of the archive being processed. @xref{Formats}, for a complete
+list of archive format names.
+@end table
+
+Any number of actions can be defined, by supplying several
+@option{--checkpoint-action} options in the command line. For
+example, the command below displays two messages, pauses
+execution for 30 seconds and executes the @file{/sbin/cpoint} script:
+
+@example
+@group
+$ @kbd{tar -c -f arc.tar \
+ --checkpoint-action='\aecho=Hit %s checkpoint #%u' \
+ --checkpoint-action='echo=Sleeping for 30 seconds' \
+ --checkpoint-action='sleep=30' \
+ --checkpoint-action='exec=/sbin/cpoint'}
+@end group
+@end example
+
+This example also illustrates the fact that
+@option{--checkpoint-action} can be used without
+@option{--checkpoint}. In this case, the default checkpoint frequency
+(at each 10th record) is assumed.
+