+When you specify @option{--absolute-names} (@option{-P}),
+@command{tar} stores file names including all superior directory
+names, and preserves leading slashes. If you only invoked
+@command{tar} from the root directory you would never need the
+@option{--absolute-names} option, but using this option
+may be more convenient than switching to root.
+
+@FIXME{Should be an example in the tutorial/wizardry section using this
+to transfer files between systems.}
+
+@FIXME{Is write access an issue?}
+
+@table @option
+@item --absolute-names
+Preserves full file names (including superior directory names) when
+archiving files. Preserves leading slash when extracting files.
+
+@end table
+
+@FIXME{this is still horrible; need to talk with dan on monday.}
+
+@command{tar} prints out a message about removing the @samp{/} from
+file names. This message appears once per @GNUTAR{}
+invocation. It represents something which ought to be told; ignoring
+what it means can cause very serious surprises, later.
+
+Some people, nevertheless, do not want to see this message. Wanting to
+play really dangerously, one may of course redirect @command{tar} standard
+error to the sink. For example, under @command{sh}:
+
+@smallexample
+$ @kbd{tar -c -f archive.tar /home 2> /dev/null}
+@end smallexample
+
+@noindent
+Another solution, both nicer and simpler, would be to change to
+the @file{/} directory first, and then avoid absolute notation.
+For example:
+
+@smallexample
+$ @kbd{(cd / && tar -c -f archive.tar home)}
+# @i{or}:
+$ @kbd{tar -c -f archive.tar -C / home}
+@end smallexample
+
+@include getdate.texi
+
+@node Formats
+@chapter Controlling the Archive Format
+
+@cindex Tar archive formats
+Due to historical reasons, there are several formats of tar archives.
+All of them are based on the same principles, but have some subtle
+differences that often make them incompatible with each other.
+
+GNU tar is able to create and handle archives in a variety of formats.
+The most frequently used formats are (in alphabetical order):
+
+@table @asis
+@item gnu
+Format used by @GNUTAR{} versions up to 1.13.25. This format derived
+from an early @acronym{POSIX} standard, adding some improvements such as
+sparse file handling and incremental archives. Unfortunately these
+features were implemented in a way incompatible with other archive
+formats.
+
+Archives in @samp{gnu} format are able to hold pathnames of unlimited
+length.
+
+@item oldgnu
+Format used by @GNUTAR{} of versions prior to 1.12.
+
+@item v7
+Archive format, compatible with the V7 implementation of tar. This
+format imposes a number of limitations. The most important of them
+are:
+
+@enumerate
+@item The maximum length of a file name is limited to 99 characters.
+@item The maximum length of a symbolic link is limited to 99 characters.
+@item It is impossible to store special files (block and character
+devices, fifos etc.)
+@item Maximum value of user or group ID is limited to 2097151 (7777777
+octal)
+@item V7 archives do not contain symbolic ownership information (user
+and group name of the file owner).
+@end enumerate
+
+This format has traditionally been used by Automake when producing
+Makefiles. This practice will change in the future, in the meantime,
+however this means that projects containing filenames more than 99
+characters long will not be able to use @GNUTAR{} @value{VERSION} and
+Automake prior to 1.9.
+
+@item ustar
+Archive format defined by @acronym{POSIX.1-1988} specification. It stores
+symbolic ownership information. It is also able to store
+special files. However, it imposes several restrictions as well:
+
+@enumerate
+@item The maximum length of a file name is limited to 256 characters,
+provided that the filename can be split at directory separator in
+two parts, first of them being at most 155 bytes long. So, in most
+cases the maximum file name length will be shorter than 256
+characters.
+@item The maximum length of a symbolic link name is limited to
+100 characters.
+@item Maximum size of a file the archive is able to accommodate
+is 8GB
+@item Maximum value of UID/GID is 2097151.
+@item Maximum number of bits in device major and minor numbers is 21.
+@end enumerate
+
+@item star
+Format used by J@"org Schilling @command{star}
+implementation. @GNUTAR{} is able to read @samp{star} archives but
+currently does not produce them.
+
+@item posix
+Archive format defined by @acronym{POSIX.1-2001} specification. This is the
+most flexible and feature-rich format. It does not impose any
+restrictions on file sizes or filename lengths. This format is quite
+recent, so not all tar implementations are able to handle it properly.
+However, this format is designed in such a way that any tar
+implementation able to read @samp{ustar} archives will be able to read
+most @samp{posix} archives as well, with the only exception that any
+additional information (such as long file names etc.) will in such
+case be extracted as plain text files along with the files it refers to.
+
+This archive format will be the default format for future versions
+of @GNUTAR{}.
+
+@end table
+
+The following table summarizes the limitations of each of these
+formats:
+
+@multitable @columnfractions .10 .20 .20 .20 .20
+@headitem Format @tab UID @tab File Size @tab Path Name @tab Devn
+@item gnu @tab 1.8e19 @tab Unlimited @tab Unlimited @tab 63
+@item oldgnu @tab 1.8e19 @tab Unlimited @tab Unlimited @tab 63
+@item v7 @tab 2097151 @tab 8GB @tab 99 @tab n/a
+@item ustar @tab 2097151 @tab 8GB @tab 256 @tab 21
+@item posix @tab Unlimited @tab Unlimited @tab Unlimited @tab Unlimited
+@end multitable
+
+The default format for @GNUTAR{} is defined at compilation
+time. You may check it by running @command{tar --help}, and examining
+the last lines of its output. Usually, @GNUTAR{} is configured
+to create archives in @samp{gnu} format, however, future version will
+switch to @samp{posix}.
+
+@menu
+* Compression:: Using Less Space through Compression
+* Attributes:: Handling File Attributes
+* Portability:: Making @command{tar} Archives More Portable
+* cpio:: Comparison of @command{tar} and @command{cpio}
+@end menu
+
+@node Compression
+@section Using Less Space through Compression
+
+@menu
+* gzip:: Creating and Reading Compressed Archives
+* sparse:: Archiving Sparse Files
+@end menu
+
+@node gzip
+@subsection Creating and Reading Compressed Archives
+@cindex Compressed archives
+@cindex Storing archives in compressed format
+
+@GNUTAR{} is able to create and read compressed archives. It supports
+@command{gzip} and @command{bzip2} compression programs. For backward
+compatibility, it also supports @command{compress} command, although
+we strongly recommend against using it, since there is a patent
+covering the algorithm it uses and you could be sued for patent
+infringement merely by running @command{compress}! Besides, it is less
+effective than @command{gzip} and @command{bzip2}.
+
+Creating a compressed archive is simple: you just specify a
+@dfn{compression option} along with the usual archive creation
+commands. The compression option is @option{-z} (@option{--gzip}) to
+create a @command{gzip} compressed archive, @option{-j}
+(@option{--bzip2}) to create a @command{bzip2} compressed archive, and
+@option{-Z} (@option{--compress}) to use @command{compress} program.
+For example:
+
+@smallexample
+$ @kbd{tar cfz archive.tar.gz .}
+@end smallexample
+
+Reading compressed archive is even simpler: you don't need to specify
+any additional options as @GNUTAR{} recognizes its format
+automatically. Thus, the following commands will list and extract the
+archive created in previous example:
+
+@smallexample
+# List the compressed archive
+$ @kbd{tar tf archive.tar.gz}
+# Extract the compressed archive
+$ @kbd{tar xf archive.tar.gz}
+@end smallexample
+
+The only case when you have to specify a decompression option while
+reading the archive is when reading from a pipe or from a tape drive
+that does not support random access. However, in this case @GNUTAR{}
+will indicate which option you should use. For example:
+
+@smallexample
+$ @kbd{cat archive.tar.gz | tar tf -}
+tar: Archive is compressed. Use -z option
+tar: Error is not recoverable: exiting now
+@end smallexample
+
+If you see such diagnostics, just add the suggested option to the
+invocation of @GNUTAR{}:
+
+@smallexample
+$ @kbd{cat archive.tar.gz | tar tfz -}
+@end smallexample
+
+Notice also, that there are several restrictions on operations on
+compressed archives. First of all, compressed archives cannot be
+modified, i.e., you cannot update (@option{--update} (@option{-u})) them or delete
+(@option{--delete}) members from them. Likewise, you cannot append
+another @command{tar} archive to a compressed archive using
+@option{--append} (@option{-r})). Secondly, multi-volume archives cannot be
+compressed.
+
+The following table summarizes compression options used by @GNUTAR{}.
+
+@table @option
+@opindex gzip
+@opindex ungzip
+@item -z
+@itemx --gzip
+@itemx --ungzip
+Filter the archive through @command{gzip}.
+
+You can use @option{--gzip} and @option{--gunzip} on physical devices
+(tape drives, etc.) and remote files as well as on normal files; data
+to or from such devices or remote files is reblocked by another copy
+of the @command{tar} program to enforce the specified (or default) record
+size. The default compression parameters are used; if you need to
+override them, set @env{GZIP} environment variable, e.g.:
+
+@smallexample
+$ @kbd{GZIP=--best tar cfz archive.tar.gz subdir}
+@end smallexample
+
+@noindent
+Another way would be to avoid the @option{--gzip} (@option{--gunzip}, @option{--ungzip}, @option{-z}) option and run
+@command{gzip} explicitly:
+
+@smallexample
+$ @kbd{tar cf - subdir | gzip --best -c - > archive.tar.gz}
+@end smallexample
+
+@cindex corrupted archives
+About corrupted compressed archives: @command{gzip}'ed files have no
+redundancy, for maximum compression. The adaptive nature of the
+compression scheme means that the compression tables are implicitly
+spread all over the archive. If you lose a few blocks, the dynamic
+construction of the compression tables becomes unsynchronized, and there
+is little chance that you could recover later in the archive.
+
+There are pending suggestions for having a per-volume or per-file
+compression in @GNUTAR{}. This would allow for viewing the
+contents without decompression, and for resynchronizing decompression at
+every volume or file, in case of corrupted archives. Doing so, we might
+lose some compressibility. But this would have make recovering easier.
+So, there are pros and cons. We'll see!
+
+@opindex bzip2
+@item -j
+@itemx --bzip2
+Filter the archive through @code{bzip2}. Otherwise like @option{--gzip}.
+
+@opindex compress
+@opindex uncompress
+@item -Z
+@itemx --compress
+@itemx --uncompress
+Filter the archive through @command{compress}. Otherwise like @option{--gzip}.
+
+The @acronym{GNU} Project recommends you not use
+@command{compress}, because there is a patent covering the algorithm it
+uses. You could be sued for patent infringement merely by running
+@command{compress}.
+
+@opindex use-compress-program
+@item --use-compress-program=@var{prog}
+Use external compression program @var{prog}. Use this option if you
+have a compression program that @GNUTAR{} does not support. There
+are two requirements to which @var{prog} should comply:
+
+First, when called without options, it should read data from standard
+input, compress it and output it on standard output.
+
+Secondly, if called with @option{-d} argument, it should do exactly
+the opposite, i.e., read the compressed data from the standard input
+and produce uncompressed data on the standard output.
+@end table
+
+@cindex gpg, using with tar
+@cindex gnupg, using with tar
+@cindex Using encrypted archives
+The @option{--use-compress-program} option, in particular, lets you
+implement your own filters, not necessarily dealing with
+compression/decompression. For example, suppose you wish to implement
+PGP encryption on top of compression, using @command{gpg} (@pxref{Top,
+gpg, gpg ---- encryption and signing tool, gpg, GNU Privacy Guard
+Manual}). The following script does that:
+
+@smallexample
+@group
+#! /bin/sh
+case $1 in
+-d) gpg --decrypt - | gzip -d -c;;
+'') gzip -c | gpg -s ;;
+*) echo "Unknown option $1">&2; exit 1;;
+esac
+@end group
+@end smallexample
+
+Suppose you name it @file{gpgz} and save it somewhere in your
+@env{PATH}. Then the following command will create a compressed
+archive signed with your private key:
+
+@smallexample
+$ @kbd{tar -cf foo.tar.gpgz --use-compress=gpgz .}
+@end smallexample
+
+@noindent
+Likewise, the following command will list its contents:
+
+@smallexample
+$ @kbd{tar -tf foo.tar.gpgz --use-compress=gpgz .}
+@end smallexample
+
+@ignore
+The above is based on the following discussion:
+
+ I have one question, or maybe it's a suggestion if there isn't a way
+ to do it now. I would like to use @option{--gzip}, but I'd also like
+ the output to be fed through a program like @acronym{GNU}
+ @command{ecc} (actually, right now that's @samp{exactly} what I'd like
+ to use :-)), basically adding ECC protection on top of compression.
+ It seems as if this should be quite easy to do, but I can't work out
+ exactly how to go about it. Of course, I can pipe the standard output
+ of @command{tar} through @command{ecc}, but then I lose (though I
+ haven't started using it yet, I confess) the ability to have
+ @command{tar} use @command{rmt} for it's I/O (I think).
+
+ I think the most straightforward thing would be to let me specify a
+ general set of filters outboard of compression (preferably ordered,
+ so the order can be automatically reversed on input operations, and
+ with the options they require specifiable), but beggars shouldn't be
+ choosers and anything you decide on would be fine with me.
+
+ By the way, I like @command{ecc} but if (as the comments say) it can't
+ deal with loss of block sync, I'm tempted to throw some time at adding
+ that capability. Supposing I were to actually do such a thing and
+ get it (apparently) working, do you accept contributed changes to
+ utilities like that? (Leigh Clayton @file{loc@@soliton.com}, May 1995).
+
+ Isn't that exactly the role of the
+ @option{--use-compress-prog=@var{program}} option?
+ I never tried it myself, but I suspect you may want to write a
+ @var{prog} script or program able to filter stdin to stdout to
+ way you want. It should recognize the @option{-d} option, for when
+ extraction is needed rather than creation.
+
+ It has been reported that if one writes compressed data (through the
+ @option{--gzip} or @option{--compress} options) to a DLT and tries to use
+ the DLT compression mode, the data will actually get bigger and one will
+ end up with less space on the tape.
+@end ignore
+
+@node sparse
+@subsection Archiving Sparse Files
+@cindex Sparse Files
+
+Files in the file system occasionally have @dfn{holes}. A @dfn{hole}
+in a file is a section of the file's contents which was never written.
+The contents of a hole reads as all zeros. On many operating systems,
+actual disk storage is not allocated for holes, but they are counted
+in the length of the file. If you archive such a file, @command{tar}
+could create an archive longer than the original. To have @command{tar}
+attempt to recognize the holes in a file, use @option{--sparse}
+(@option{-S}). When you use this option, then, for any file using
+less disk space than would be expected from its length, @command{tar}
+searches the file for consecutive stretches of zeros. It then records
+in the archive for the file where the consecutive stretches of zeros
+are, and only archives the ``real contents'' of the file. On
+extraction (using @option{--sparse} is not needed on extraction) any
+such files have holes created wherever the continuous stretches of zeros
+were found. Thus, if you use @option{--sparse}, @command{tar} archives
+won't take more space than the original.
+
+@table @option
+@opindex sparse
+@item -S
+@itemx --sparse
+This option instructs @command{tar} to test each file for sparseness
+before attempting to archive it. If the file is found to be sparse it
+is treated specially, thus allowing to decrease the amount of space
+used by its image in the archive.
+
+This option is meaningful only when creating or updating archives. It
+has no effect on extraction.
+@end table
+
+Consider using @option{--sparse} when performing file system backups,
+to avoid archiving the expanded forms of files stored sparsely in the
+system.
+
+Even if your system has no sparse files currently, some may be
+created in the future. If you use @option{--sparse} while making file
+system backups as a matter of course, you can be assured the archive
+will never take more space on the media than the files take on disk
+(otherwise, archiving a disk filled with sparse files might take
+hundreds of tapes). @xref{Incremental Dumps}.
+
+However, be aware that @option{--sparse} option presents a serious
+drawback. Namely, in order to determine if the file is sparse
+@command{tar} has to read it before trying to archive it, so in total
+the file is read @strong{twice}. So, always bear in mind that the
+time needed to process all files with this option is roughly twice
+the time needed to archive them without it.
+@FIXME{A technical note:
+
+Programs like @command{dump} do not have to read the entire file; by
+examining the file system directly, they can determine in advance
+exactly where the holes are and thus avoid reading through them. The
+only data it need read are the actual allocated data blocks.
+@GNUTAR{} uses a more portable and straightforward
+archiving approach, it would be fairly difficult that it does
+otherwise. Elizabeth Zwicky writes to @file{comp.unix.internals}, on
+1990-12-10:
+
+@quotation
+What I did say is that you cannot tell the difference between a hole and an
+equivalent number of nulls without reading raw blocks. @code{st_blocks} at
+best tells you how many holes there are; it doesn't tell you @emph{where}.
+Just as programs may, conceivably, care what @code{st_blocks} is (care
+to name one that does?), they may also care where the holes are (I have
+no examples of this one either, but it's equally imaginable).