--- /dev/null
+#!/bin/sh
+# a u t o g e n . s h
+#
+# Copyright (c) 2005-2007 United States Government as represented by
+# the U.S. Army Research Laboratory.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above
+# copyright notice, this list of conditions and the following
+# disclaimer in the documentation and/or other materials provided
+# with the distribution.
+#
+# 3. The name of the author may not be used to endorse or promote
+# products derived from this software without specific prior written
+# permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
+# OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+# GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+###
+#
+# Script for automatically preparing the sources for compilation by
+# performing the myrid of necessary steps. The script attempts to
+# detect proper version support, and outputs warnings about particular
+# systems that have autotool peculiarities.
+#
+# Basically, if everything is set up and installed correctly, the
+# script will validate that minimum versions of the GNU Build System
+# tools are installed, account for several common configuration
+# issues, and then simply run autoreconf for you.
+#
+# If autoreconf fails, which can happen for many valid configurations,
+# this script proceeds to run manual preparation steps effectively
+# providing a POSIX shell script (mostly complete) reimplementation of
+# autoreconf.
+#
+# The AUTORECONF, AUTOCONF, AUTOMAKE, LIBTOOLIZE, ACLOCAL, AUTOHEADER
+# environment variables and corresponding _OPTIONS variables (e.g.
+# AUTORECONF_OPTIONS) may be used to override the default automatic
+# detection behaviors. Similarly the _VERSION variables will override
+# the minimum required version numbers.
+#
+# Examples:
+#
+# To obtain help on usage:
+# ./autogen.sh --help
+#
+# To obtain verbose output:
+# ./autogen.sh --verbose
+#
+# To skip autoreconf and prepare manually:
+# AUTORECONF=false ./autogen.sh
+#
+# To verbosely try running with an older (unsupported) autoconf:
+# AUTOCONF_VERSION=2.50 ./autogen.sh --verbose
+#
+# Author: Christopher Sean Morrison <morrison@brlcad.org>
+#
+######################################################################
+
+# set to minimum acceptible version of autoconf
+if [ "x$AUTOCONF_VERSION" = "x" ] ; then
+ AUTOCONF_VERSION=2.52
+fi
+# set to minimum acceptible version of automake
+if [ "x$AUTOMAKE_VERSION" = "x" ] ; then
+ AUTOMAKE_VERSION=1.6.0
+fi
+# set to minimum acceptible version of libtool
+if [ "x$LIBTOOL_VERSION" = "x" ] ; then
+ LIBTOOL_VERSION=1.4.2
+fi
+
+
+##################
+# ident function #
+##################
+ident ( ) {
+ # extract copyright from header
+ __copyright="`grep Copyright $AUTOGEN_SH | head -${HEAD_N}1 | awk '{print $4}'`"
+ if [ "x$__copyright" = "x" ] ; then
+ __copyright="`date +%Y`"
+ fi
+
+ # extract version from CVS Id string
+ __id="$Id: autogen.sh,v 14.97 2007/06/18 22:25:02 brlcad Exp $"
+ __version="`echo $__id | sed 's/.*\([0-9][0-9][0-9][0-9]\)[-\/]\([0-9][0-9]\)[-\/]\([0-9][0-9]\).*/\1\2\3/'`"
+ if [ "x$__version" = "x" ] ; then
+ __version=""
+ fi
+
+ echo "autogen.sh build preparation script by Christopher Sean Morrison"
+ echo "revised 3-clause BSD-style license, copyright (c) $__copyright"
+ echo "script version $__version, ISO/IEC 9945 POSIX shell script"
+}
+
+
+##################
+# USAGE FUNCTION #
+##################
+usage ( ) {
+ echo "Usage: $AUTOGEN_SH [-h|--help] [-v|--verbose] [-q|--quiet] [--version]"
+ echo " --help Help on $NAME_OF_AUTOGEN usage"
+ echo " --verbose Verbose progress output"
+ echo " --quiet Quiet suppressed progress output"
+ echo " --version Only perform GNU Build System version checks"
+ echo
+ echo "Description: This script will validate that minimum versions of the"
+ echo "GNU Build System tools are installed and then run autoreconf for you."
+ echo "Should autoreconf fail, manual preparation steps will be run"
+ echo "potentially accounting for several common preparation issues. The"
+
+ echo "AUTORECONF, AUTOCONF, AUTOMAKE, LIBTOOLIZE, ACLOCAL, AUTOHEADER,"
+ echo "PROJECT, & CONFIGURE environment variables and corresponding _OPTIONS"
+ echo "variables (e.g. AUTORECONF_OPTIONS) may be used to override the"
+ echo "default automatic detection behavior."
+ echo
+
+ ident
+
+ return 0
+}
+
+
+##########################
+# VERSION_ERROR FUNCTION #
+##########################
+version_error ( ) {
+ if [ "x$1" = "x" ] ; then
+ echo "INTERNAL ERROR: version_error was not provided a version"
+ exit 1
+ fi
+ if [ "x$2" = "x" ] ; then
+ echo "INTERNAL ERROR: version_error was not provided an application name"
+ exit 1
+ fi
+ $ECHO
+ $ECHO "ERROR: To prepare the ${PROJECT} build system from scratch,"
+ $ECHO " at least version $1 of $2 must be installed."
+ $ECHO
+ $ECHO "$NAME_OF_AUTOGEN does not need to be run on the same machine that will"
+ $ECHO "run configure or make. Either the GNU Autotools will need to be installed"
+ $ECHO "or upgraded on this system, or $NAME_OF_AUTOGEN must be run on the source"
+ $ECHO "code on another system and then transferred to here. -- Cheers!"
+ $ECHO
+}
+
+##########################
+# VERSION_CHECK FUNCTION #
+##########################
+version_check ( ) {
+ if [ "x$1" = "x" ] ; then
+ echo "INTERNAL ERROR: version_check was not provided a minimum version"
+ exit 1
+ fi
+ _min="$1"
+ if [ "x$2" = "x" ] ; then
+ echo "INTERNAL ERROR: version check was not provided a comparison version"
+ exit 1
+ fi
+ _cur="$2"
+
+ # needed to handle versions like 1.10 and 1.4-p6
+ _min="`echo ${_min}. | sed 's/[^0-9]/./g' | sed 's/\.\././g'`"
+ _cur="`echo ${_cur}. | sed 's/[^0-9]/./g' | sed 's/\.\././g'`"
+
+ _min_major="`echo $_min | cut -d. -f1`"
+ _min_minor="`echo $_min | cut -d. -f2`"
+ _min_patch="`echo $_min | cut -d. -f3`"
+
+ _cur_major="`echo $_cur | cut -d. -f1`"
+ _cur_minor="`echo $_cur | cut -d. -f2`"
+ _cur_patch="`echo $_cur | cut -d. -f3`"
+
+ if [ "x$_min_major" = "x" ] ; then
+ _min_major=0
+ fi
+ if [ "x$_min_minor" = "x" ] ; then
+ _min_minor=0
+ fi
+ if [ "x$_min_patch" = "x" ] ; then
+ _min_patch=0
+ fi
+ if [ "x$_cur_minor" = "x" ] ; then
+ _cur_major=0
+ fi
+ if [ "x$_cur_minor" = "x" ] ; then
+ _cur_minor=0
+ fi
+ if [ "x$_cur_patch" = "x" ] ; then
+ _cur_patch=0
+ fi
+
+ $VERBOSE_ECHO "Checking if ${_cur_major}.${_cur_minor}.${_cur_patch} is greater than ${_min_major}.${_min_minor}.${_min_patch}"
+
+ if [ $_min_major -lt $_cur_major ] ; then
+ return 0
+ elif [ $_min_major -eq $_cur_major ] ; then
+ if [ $_min_minor -lt $_cur_minor ] ; then
+ return 0
+ elif [ $_min_minor -eq $_cur_minor ] ; then
+ if [ $_min_patch -lt $_cur_patch ] ; then
+ return 0
+ elif [ $_min_patch -eq $_cur_patch ] ; then
+ return 0
+ fi
+ fi
+ fi
+ return 1
+}
+
+
+######################################
+# LOCATE_CONFIGURE_TEMPLATE FUNCTION #
+######################################
+locate_configure_template ( ) {
+ _pwd="`pwd`"
+ if test -f "./configure.ac" ; then
+ echo "./configure.ac"
+ elif test -f "./configure.in" ; then
+ echo "./configure.in"
+ elif test -f "$_pwd/configure.ac" ; then
+ echo "$_pwd/configure.ac"
+ elif test -f "$_pwd/configure.in" ; then
+ echo "$_pwd/configure.in"
+ elif test -f "$PATH_TO_AUTOGEN/configure.ac" ; then
+ echo "$PATH_TO_AUTOGEN/configure.ac"
+ elif test -f "$PATH_TO_AUTOGEN/configure.in" ; then
+ echo "$PATH_TO_AUTOGEN/configure.in"
+ fi
+}
+
+
+##################
+# argument check #
+##################
+ARGS="$*"
+PATH_TO_AUTOGEN="`dirname $0`"
+NAME_OF_AUTOGEN="`basename $0`"
+AUTOGEN_SH="$PATH_TO_AUTOGEN/$NAME_OF_AUTOGEN"
+
+LIBTOOL_M4="${PATH_TO_AUTOGEN}/misc/libtool.m4"
+
+if [ "x$HELP" = "x" ] ; then
+ HELP=no
+fi
+if [ "x$QUIET" = "x" ] ; then
+ QUIET=no
+fi
+if [ "x$VERBOSE" = "x" ] ; then
+ VERBOSE=no
+fi
+if [ "x$VERSION_ONLY" = "x" ] ; then
+ VERSION_ONLY=no
+fi
+if [ "x$AUTORECONF_OPTIONS" = "x" ] ; then
+ AUTORECONF_OPTIONS="-i -f"
+fi
+if [ "x$AUTOCONF_OPTIONS" = "x" ] ; then
+ AUTOCONF_OPTIONS="-f"
+fi
+if [ "x$AUTOMAKE_OPTIONS" = "x" ] ; then
+ AUTOMAKE_OPTIONS="-a -c -f"
+fi
+ALT_AUTOMAKE_OPTIONS="-a -c"
+if [ "x$LIBTOOLIZE_OPTIONS" = "x" ] ; then
+ LIBTOOLIZE_OPTIONS="--automake -c -f"
+fi
+ALT_LIBTOOLIZE_OPTIONS="--automake --copy --force"
+if [ "x$ACLOCAL_OPTIONS" = "x" ] ; then
+ ACLOCAL_OPTIONS=""
+fi
+if [ "x$AUTOHEADER_OPTIONS" = "x" ] ; then
+ AUTOHEADER_OPTIONS=""
+fi
+for arg in $ARGS ; do
+ case "x$arg" in
+ x--help) HELP=yes ;;
+ x-[hH]) HELP=yes ;;
+ x--quiet) QUIET=yes ;;
+ x-[qQ]) QUIET=yes ;;
+ x--verbose) VERBOSE=yes ;;
+ x-[vV]) VERBOSE=yes ;;
+ x--version) VERSION_ONLY=yes ;;
+ *)
+ echo "Unknown option: $arg"
+ echo
+ usage
+ exit 1
+ ;;
+ esac
+done
+
+
+#####################
+# environment check #
+#####################
+
+# sanity check before recursions potentially begin
+if [ ! -f "$AUTOGEN_SH" ] ; then
+ echo "INTERNAL ERROR: $AUTOGEN_SH does not exist"
+ if [ ! "x$0" = "x$AUTOGEN_SH" ] ; then
+ echo "INTERNAL ERROR: dirname/basename inconsistency: $0 != $AUTOGEN_SH"
+ fi
+ exit 1
+fi
+
+# force locale setting to C so things like date output as expected
+LC_ALL=C
+
+# commands that this script expects
+for __cmd in echo head tail pwd ; do
+ echo "test" | $__cmd > /dev/null 2>&1
+ if [ $? != 0 ] ; then
+ echo "INTERNAL ERROR: '${__cmd}' command is required"
+ exit 2
+ fi
+done
+echo "test" | grep "test" > /dev/null 2>&1
+if test ! x$? = x0 ; then
+ echo "INTERNAL ERROR: grep command is required"
+ exit 1
+fi
+echo "test" | sed "s/test/test/" > /dev/null 2>&1
+if test ! x$? = x0 ; then
+ echo "INTERNAL ERROR: sed command is required"
+ exit 1
+fi
+
+
+# determine the behavior of echo
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+ *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T=' ' ;;
+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+# determine the behavior of head
+case "x`echo 'head' | head -n 1 2>&1`" in
+ *xhead*) HEAD_N="n " ;;
+ *) HEAD_N="" ;;
+esac
+
+# determine the behavior of tail
+case "x`echo 'tail' | tail -n 1 2>&1`" in
+ *xtail*) TAIL_N="n " ;;
+ *) TAIL_N="" ;;
+esac
+
+VERBOSE_ECHO=:
+ECHO=:
+if [ "x$QUIET" = "xyes" ] ; then
+ if [ "x$VERBOSE" = "xyes" ] ; then
+ echo "Verbose output quelled by quiet option. Further output disabled."
+ fi
+else
+ ECHO=echo
+ if [ "x$VERBOSE" = "xyes" ] ; then
+ echo "Verbose output enabled"
+ VERBOSE_ECHO=echo
+ fi
+fi
+
+
+# allow a recursive run to disable further recursions
+if [ "x$RUN_RECURSIVE" = "x" ] ; then
+ RUN_RECURSIVE=yes
+fi
+
+
+################################################
+# check for help arg and bypass version checks #
+################################################
+if [ "x`echo $ARGS | sed 's/.*[hH][eE][lL][pP].*/help/'`" = "xhelp" ] ; then
+ HELP=yes
+fi
+if [ "x$HELP" = "xyes" ] ; then
+ usage
+ $ECHO "---"
+ $ECHO "Help was requested. No preparation or configuration will be performed."
+ exit 0
+fi
+
+
+#######################
+# set up signal traps #
+#######################
+untrap_abnormal ( ) {
+ for sig in 1 2 13 15; do
+ trap - $sig
+ done
+}
+
+# do this cleanup whenever we exit.
+trap '
+ # start from the root
+ if test -d "$START_PATH" ; then
+ cd "$START_PATH"
+ fi
+
+ # restore/delete backup files
+ if test "x$PFC_INIT" = "x1" ; then
+ recursive_restore
+ fi
+' 0
+
+# trap SIGHUP (1), SIGINT (2), SIGPIPE (13), SIGTERM (15)
+for sig in 1 2 13 15; do
+ trap '
+ $ECHO ""
+ $ECHO "Aborting $NAME_OF_AUTOGEN: caught signal '$sig'"
+
+ # start from the root
+ if test -d "$START_PATH" ; then
+ cd "$START_PATH"
+ fi
+
+ # clean up on abnormal exit
+ $VERBOSE_ECHO "rm -rf autom4te.cache"
+ rm -rf autom4te.cache
+
+ if test -f "acinclude.m4.$$.backup" ; then
+ $VERBOSE_ECHO "cat acinclude.m4.$$.backup > acinclude.m4"
+ chmod u+w acinclude.m4
+ cat acinclude.m4.$$.backup > acinclude.m4
+
+ $VERBOSE_ECHO "rm -f acinclude.m4.$$.backup"
+ rm -f acinclude.m4.$$.backup
+ fi
+
+ { (exit 1); exit 1; }
+' $sig
+done
+
+
+#############################
+# look for a configure file #
+#############################
+if [ "x$CONFIGURE" = "x" ] ; then
+ CONFIGURE="`locate_configure_template`"
+ if [ ! "x$CONFIGURE" = "x" ] ; then
+ $VERBOSE_ECHO "Found a configure template: $CONFIGURE"
+ fi
+else
+ $ECHO "Using CONFIGURE environment variable override: $CONFIGURE"
+fi
+if [ "x$CONFIGURE" = "x" ] ; then
+ if [ "x$VERSION_ONLY" = "xyes" ] ; then
+ CONFIGURE=/dev/null
+ else
+ $ECHO
+ $ECHO "A configure.ac or configure.in file could not be located implying"
+ $ECHO "that the GNU Build System is at least not used in this directory. In"
+ $ECHO "any case, there is nothing to do here without one of those files."
+ $ECHO
+ $ECHO "ERROR: No configure.in or configure.ac file found in `pwd`"
+ exit 1
+ fi
+fi
+
+####################
+# get project name #
+####################
+if [ "x$PROJECT" = "x" ] ; then
+ PROJECT="`grep AC_INIT $CONFIGURE | grep -v '.*#.*AC_INIT' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_INIT(\([^,)]*\).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
+ if [ "x$PROJECT" = "xAC_INIT" ] ; then
+ # projects might be using the older/deprecated arg-less AC_INIT .. look for AM_INIT_AUTOMAKE instead
+ PROJECT="`grep AM_INIT_AUTOMAKE $CONFIGURE | grep -v '.*#.*AM_INIT_AUTOMAKE' | tail -${TAIL_N}1 | sed 's/^[ ]*AM_INIT_AUTOMAKE(\([^,)]*\).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
+ fi
+ if [ "x$PROJECT" = "xAM_INIT_AUTOMAKE" ] ; then
+ PROJECT="project"
+ fi
+ if [ "x$PROJECT" = "x" ] ; then
+ PROJECT="project"
+ fi
+else
+ $ECHO "Using PROJECT environment variable override: $PROJECT"
+fi
+$ECHO "Preparing the $PROJECT build system...please wait"
+$ECHO
+
+
+########################
+# check for autoreconf #
+########################
+HAVE_AUTORECONF=no
+if [ "x$AUTORECONF" = "x" ] ; then
+ for AUTORECONF in autoreconf ; do
+ $VERBOSE_ECHO "Checking autoreconf version: $AUTORECONF --version"
+ $AUTORECONF --version > /dev/null 2>&1
+ if [ $? = 0 ] ; then
+ HAVE_AUTORECONF=yes
+ break
+ fi
+ done
+else
+ HAVE_AUTORECONF=yes
+ $ECHO "Using AUTORECONF environment variable override: $AUTORECONF"
+fi
+
+
+##########################
+# autoconf version check #
+##########################
+_acfound=no
+if [ "x$AUTOCONF" = "x" ] ; then
+ for AUTOCONF in autoconf ; do
+ $VERBOSE_ECHO "Checking autoconf version: $AUTOCONF --version"
+ $AUTOCONF --version > /dev/null 2>&1
+ if [ $? = 0 ] ; then
+ _acfound=yes
+ break
+ fi
+ done
+else
+ _acfound=yes
+ $ECHO "Using AUTOCONF environment variable override: $AUTOCONF"
+fi
+
+_report_error=no
+if [ ! "x$_acfound" = "xyes" ] ; then
+ $ECHO "ERROR: Unable to locate GNU Autoconf."
+ _report_error=yes
+else
+ _version="`$AUTOCONF --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`"
+ if [ "x$_version" = "x" ] ; then
+ _version="0.0.0"
+ fi
+ $ECHO "Found GNU Autoconf version $_version"
+ version_check "$AUTOCONF_VERSION" "$_version"
+ if [ $? -ne 0 ] ; then
+ _report_error=yes
+ fi
+fi
+if [ "x$_report_error" = "xyes" ] ; then
+ version_error "$AUTOCONF_VERSION" "GNU Autoconf"
+ exit 1
+fi
+
+
+##########################
+# automake version check #
+##########################
+_amfound=no
+if [ "x$AUTOMAKE" = "x" ] ; then
+ for AUTOMAKE in automake ; do
+ $VERBOSE_ECHO "Checking automake version: $AUTOMAKE --version"
+ $AUTOMAKE --version > /dev/null 2>&1
+ if [ $? = 0 ] ; then
+ _amfound=yes
+ break
+ fi
+ done
+else
+ _amfound=yes
+ $ECHO "Using AUTOMAKE environment variable override: $AUTOMAKE"
+fi
+
+
+_report_error=no
+if [ ! "x$_amfound" = "xyes" ] ; then
+ $ECHO
+ $ECHO "ERROR: Unable to locate GNU Automake."
+ _report_error=yes
+else
+ _version="`$AUTOMAKE --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`"
+ if [ "x$_version" = "x" ] ; then
+ _version="0.0.0"
+ fi
+ $ECHO "Found GNU Automake version $_version"
+ version_check "$AUTOMAKE_VERSION" "$_version"
+ if [ $? -ne 0 ] ; then
+ _report_error=yes
+ fi
+fi
+if [ "x$_report_error" = "xyes" ] ; then
+ version_error "$AUTOMAKE_VERSION" "GNU Automake"
+ exit 1
+fi
+
+
+########################
+# check for libtoolize #
+########################
+HAVE_LIBTOOLIZE=yes
+HAVE_ALT_LIBTOOLIZE=no
+_ltfound=no
+if [ "x$LIBTOOLIZE" = "x" ] ; then
+ LIBTOOLIZE=libtoolize
+ $VERBOSE_ECHO "Checking libtoolize version: $LIBTOOLIZE --version"
+ $LIBTOOLIZE --version > /dev/null 2>&1
+ if [ ! $? = 0 ] ; then
+ HAVE_LIBTOOLIZE=no
+ $ECHO
+ if [ "x$HAVE_AUTORECONF" = "xno" ] ; then
+ $ECHO "Warning: libtoolize does not appear to be available."
+ else
+ $ECHO "Warning: libtoolize does not appear to be available. This means that"
+ $ECHO "the automatic build preparation via autoreconf will probably not work."
+ $ECHO "Preparing the build by running each step individually, however, should"
+ $ECHO "work and will be done automatically for you if autoreconf fails."
+ fi
+
+ # look for some alternates
+ for tool in glibtoolize libtoolize15 libtoolize14 libtoolize13 ; do
+ $VERBOSE_ECHO "Checking libtoolize alternate: $tool --version"
+ _glibtoolize="`$tool --version > /dev/null 2>&1`"
+ if [ $? = 0 ] ; then
+ $VERBOSE_ECHO "Found $tool --version"
+ _glti="`which $tool`"
+ if [ "x$_glti" = "x" ] ; then
+ $VERBOSE_ECHO "Cannot find $tool with which"
+ continue;
+ fi
+ if test ! -f "$_glti" ; then
+ $VERBOSE_ECHO "Cannot use $tool, $_glti is not a file"
+ continue;
+ fi
+ _gltidir="`dirname $_glti`"
+ if [ "x$_gltidir" = "x" ] ; then
+ $VERBOSE_ECHO "Cannot find $tool path with dirname of $_glti"
+ continue;
+ fi
+ if test ! -d "$_gltidir" ; then
+ $VERBOSE_ECHO "Cannot use $tool, $_gltidir is not a directory"
+ continue;
+ fi
+ HAVE_ALT_LIBTOOLIZE=yes
+ LIBTOOLIZE="$tool"
+ $ECHO
+ $ECHO "Fortunately, $tool was found which means that your system may simply"
+ $ECHO "have a non-standard or incomplete GNU Autotools install. If you have"
+ $ECHO "sufficient system access, it may be possible to quell this warning by"
+ $ECHO "running:"
+ $ECHO
+ sudo -V > /dev/null 2>&1
+ if [ $? = 0 ] ; then
+ $ECHO " sudo ln -s $_glti $_gltidir/libtoolize"
+ $ECHO
+ else
+ $ECHO " ln -s $_glti $_gltidir/libtoolize"
+ $ECHO
+ $ECHO "Run that as root or with proper permissions to the $_gltidir directory"
+ $ECHO
+ fi
+ _ltfound=yes
+ break
+ fi
+ done
+ else
+ _ltfound=yes
+ fi
+else
+ _ltfound=yes
+ $ECHO "Using LIBTOOLIZE environment variable override: $LIBTOOLIZE"
+fi
+
+
+############################
+# libtoolize version check #
+############################
+_report_error=no
+if [ ! "x$_ltfound" = "xyes" ] ; then
+ $ECHO
+ $ECHO "ERROR: Unable to locate GNU Libtool."
+ _report_error=yes
+else
+ _version="`$LIBTOOLIZE --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`"
+ if [ "x$_version" = "x" ] ; then
+ _version="0.0.0"
+ fi
+ $ECHO "Found GNU Libtool version $_version"
+ version_check "$LIBTOOL_VERSION" "$_version"
+ if [ $? -ne 0 ] ; then
+ _report_error=yes
+ fi
+fi
+if [ "x$_report_error" = "xyes" ] ; then
+ version_error "$LIBTOOL_VERSION" "GNU Libtool"
+ exit 1
+fi
+
+
+#####################
+# check for aclocal #
+#####################
+if [ "x$ACLOCAL" = "x" ] ; then
+ for ACLOCAL in aclocal ; do
+ $VERBOSE_ECHO "Checking aclocal version: $ACLOCAL --version"
+ $ACLOCAL --version > /dev/null 2>&1
+ if [ $? = 0 ] ; then
+ break
+ fi
+ done
+else
+ $ECHO "Using ACLOCAL environment variable override: $ACLOCAL"
+fi
+
+
+########################
+# check for autoheader #
+########################
+if [ "x$AUTOHEADER" = "x" ] ; then
+ for AUTOHEADER in autoheader ; do
+ $VERBOSE_ECHO "Checking autoheader version: $AUTOHEADER --version"
+ $AUTOHEADER --version > /dev/null 2>&1
+ if [ $? = 0 ] ; then
+ break
+ fi
+ done
+else
+ $ECHO "Using AUTOHEADER environment variable override: $AUTOHEADER"
+fi
+
+
+#########################
+# check if version only #
+#########################
+$VERBOSE_ECHO "Checking whether to only output version information"
+if [ "x$VERSION_ONLY" = "xyes" ] ; then
+ $ECHO
+ ident
+ $ECHO "---"
+ $ECHO "Version requested. No preparation or configuration will be performed."
+ exit 0
+fi
+
+
+#################################
+# PROTECT_FROM_CLOBBER FUNCTION #
+#################################
+protect_from_clobber ( ) {
+ PFC_INIT=1
+
+ # protect COPYING & INSTALL from overwrite by automake. the
+ # automake force option will (inappropriately) ignore the existing
+ # contents of a COPYING and/or INSTALL files (depending on the
+ # version) instead of just forcing *missing* files like it does
+ # for AUTHORS, NEWS, and README. this is broken but extremely
+ # prevalent behavior, so we protect against it by keeping a backup
+ # of the file that can later be restored.
+
+ if test -f COPYING ; then
+ if test -f COPYING.$$.protect_from_automake.backup ; then
+ $VERBOSE_ECHO "Already backed up COPYING in `pwd`"
+ else
+ $VERBOSE_ECHO "Backing up COPYING in `pwd`"
+ $VERBOSE_ECHO "cp -p COPYING COPYING.$$.protect_from_automake.backup"
+ cp -p COPYING COPYING.$$.protect_from_automake.backup
+ fi
+ fi
+ if test -f INSTALL ; then
+ if test -f INSTALL.$$.protect_from_automake.backup ; then
+ $VERBOSE_ECHO "Already backed up INSTALL in `pwd`"
+ else
+ $VERBOSE_ECHO "Backing up INSTALL in `pwd`"
+ $VERBOSE_ECHO "cp -p INSTALL INSTALL.$$.protect_from_automake.backup"
+ cp -p INSTALL INSTALL.$$.protect_from_automake.backup
+ fi
+ fi
+}
+
+
+##############################
+# RECURSIVE_PROTECT FUNCTION #
+##############################
+recursive_protect ( ) {
+
+ # for projects using recursive configure, run the build
+ # preparation steps for the subdirectories. this function assumes
+ # START_PATH was set to pwd before recursion begins so that
+ # relative paths work.
+
+ # git 'r done, protect COPYING and INSTALL from being clobbered
+ protect_from_clobber
+
+ if test -d autom4te.cache ; then
+ $VERBOSE_ECHO "Found an autom4te.cache directory, deleting it"
+ $VERBOSE_ECHO "rm -rf autom4te.cache"
+ rm -rf autom4te.cache
+ fi
+
+ # find configure template
+ _configure="`locate_configure_template`"
+ if [ "x$_configure" = "x" ] ; then
+ return
+ fi
+ # $VERBOSE_ECHO "Looking for configure template found `pwd`/$_configure"
+
+ # look for subdirs
+ # $VERBOSE_ECHO "Looking for subdirs in `pwd`"
+ _det_config_subdirs="`grep AC_CONFIG_SUBDIRS $_configure | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
+ CHECK_DIRS=""
+ for dir in $_det_config_subdirs ; do
+ if test -d "`pwd`/$dir" ; then
+ CHECK_DIRS="$CHECK_DIRS \"`pwd`/$dir\""
+ fi
+ done
+
+ # process subdirs
+ if [ ! "x$CHECK_DIRS" = "x" ] ; then
+ $VERBOSE_ECHO "Recursively scanning the following directories:"
+ $VERBOSE_ECHO " $CHECK_DIRS"
+ for dir in $CHECK_DIRS ; do
+ $VERBOSE_ECHO "Protecting files from automake in $dir"
+ cd "$START_PATH"
+ eval "cd $dir"
+
+ # recursively git 'r done
+ recursive_protect
+ done
+ fi
+} # end of recursive_protect
+
+
+#############################
+# RESTORE_CLOBBERED FUNCION #
+#############################
+restore_clobbered ( ) {
+
+ # The automake (and autoreconf by extension) -f/--force-missing
+ # option may overwrite COPYING and INSTALL even if they do exist.
+ # Here we restore the files if necessary.
+
+ spacer=no
+
+ # COPYING
+ if test -f COPYING.$$.protect_from_automake.backup ; then
+ if test -f COPYING ; then
+ # compare entire content, restore if needed
+ if test "x`cat COPYING`" != "x`cat COPYING.$$.protect_from_automake.backup`" ; then
+ if test "x$spacer" = "xno" ; then
+ $VERBOSE_ECHO
+ spacer=yes
+ fi
+ # restore the backup
+ $VERBOSE_ECHO "Restoring COPYING from backup (automake -f likely clobbered it)"
+ $VERBOSE_ECHO "rm -f COPYING"
+ rm -f COPYING
+ $VERBOSE_ECHO "mv COPYING.$$.protect_from_automake.backup COPYING"
+ mv COPYING.$$.protect_from_automake.backup COPYING
+ fi # check contents
+ elif test -f COPYING.$$.protect_from_automake.backup ; then
+ $VERBOSE_ECHO "mv COPYING.$$.protect_from_automake.backup COPYING"
+ mv COPYING.$$.protect_from_automake.backup COPYING
+ fi # -f COPYING
+
+ # just in case
+ $VERBOSE_ECHO "rm -f COPYING.$$.protect_from_automake.backup"
+ rm -f COPYING.$$.protect_from_automake.backup
+ fi # -f COPYING.$$.protect_from_automake.backup
+
+ # INSTALL
+ if test -f INSTALL.$$.protect_from_automake.backup ; then
+ if test -f INSTALL ; then
+ # compare entire content, restore if needed
+ if test "x`cat INSTALL`" != "x`cat INSTALL.$$.protect_from_automake.backup`" ; then
+ if test "x$spacer" = "xno" ; then
+ $VERBOSE_ECHO
+ spacer=yes
+ fi
+ # restore the backup
+ $VERBOSE_ECHO "Restoring INSTALL from backup (automake -f likely clobbered it)"
+ $VERBOSE_ECHO "rm -f INSTALL"
+ rm -f INSTALL
+ $VERBOSE_ECHO "mv INSTALL.$$.protect_from_automake.backup INSTALL"
+ mv INSTALL.$$.protect_from_automake.backup INSTALL
+ fi # check contents
+ elif test -f INSTALL.$$.protect_from_automake.backup ; then
+ $VERBOSE_ECHO "mv INSTALL.$$.protect_from_automake.backup INSTALL"
+ mv INSTALL.$$.protect_from_automake.backup INSTALL
+ fi # -f INSTALL
+
+ # just in case
+ $VERBOSE_ECHO "rm -f INSTALL.$$.protect_from_automake.backup"
+ rm -f INSTALL.$$.protect_from_automake.backup
+ fi # -f INSTALL.$$.protect_from_automake.backup
+
+ CONFIGURE="`locate_configure_template`"
+ if [ "x$CONFIGURE" = "x" ] ; then
+ return
+ fi
+
+ _aux_dir="`grep AC_CONFIG_AUX_DIR $CONFIGURE | grep -v '.*#.*AC_CONFIG_AUX_DIR' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_CONFIG_AUX_DIR(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
+ if test ! -d "$_aux_dir" ; then
+ _aux_dir=.
+ fi
+
+ for file in config.guess config.sub ltmain.sh ; do
+ if test -f "${_aux_dir}/${file}" ; then
+ $VERBOSE_ECHO "rm -f \"${_aux_dir}/${file}.backup\""
+ rm -f "${_aux_dir}/${file}.backup"
+ fi
+ done
+} # end of restore_clobbered
+
+
+##############################
+# RECURSIVE_RESTORE FUNCTION #
+##############################
+recursive_restore ( ) {
+
+ # restore COPYING and INSTALL from backup if they were clobbered
+ # for each directory recursively.
+
+ # git 'r undone
+ restore_clobbered
+
+ # find configure template
+ _configure="`locate_configure_template`"
+ if [ "x$_configure" = "x" ] ; then
+ return
+ fi
+
+ # look for subdirs
+ _det_config_subdirs="`grep AC_CONFIG_SUBDIRS $_configure | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
+ CHECK_DIRS=""
+ for dir in $_det_config_subdirs ; do
+ if test -d "`pwd`/$dir" ; then
+ CHECK_DIRS="$CHECK_DIRS \"`pwd`/$dir\""
+ fi
+ done
+
+ # process subdirs
+ if [ ! "x$CHECK_DIRS" = "x" ] ; then
+ $VERBOSE_ECHO "Recursively scanning the following directories:"
+ $VERBOSE_ECHO " $CHECK_DIRS"
+ for dir in $CHECK_DIRS ; do
+ $VERBOSE_ECHO "Checking files for automake damage in $dir"
+ cd "$START_PATH"
+ eval "cd $dir"
+
+ # recursively git 'r undone
+ recursive_restore
+ done
+ fi
+} # end of recursive_restore
+
+
+#######################
+# INITIALIZE FUNCTION #
+#######################
+initialize ( ) {
+
+ # this routine performs a variety of directory-specific
+ # initializations. some are sanity checks, some are preventive,
+ # and some are necessary setup detection.
+ #
+ # this function sets:
+ # CONFIGURE
+ # SEARCH_DIRS
+ # CONFIG_SUBDIRS
+
+ ##################################
+ # check for a configure template #
+ ##################################
+ CONFIGURE="`locate_configure_template`"
+ if [ "x$CONFIGURE" = "x" ] ; then
+ $ECHO
+ $ECHO "A configure.ac or configure.in file could not be located implying"
+ $ECHO "that the GNU Build System is at least not used in this directory. In"
+ $ECHO "any case, there is nothing to do here without one of those files."
+ $ECHO
+ $ECHO "ERROR: No configure.in or configure.ac file found in `pwd`"
+ exit 1
+ fi
+
+ #####################
+ # detect an aux dir #
+ #####################
+ _aux_dir="`grep AC_CONFIG_AUX_DIR $CONFIGURE | grep -v '.*#.*AC_CONFIG_AUX_DIR' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_CONFIG_AUX_DIR(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
+ if test ! -d "$_aux_dir" ; then
+ _aux_dir=.
+ else
+ $VERBOSE_ECHO "Detected auxillary directory: $_aux_dir"
+ fi
+
+ ################################
+ # detect a recursive configure #
+ ################################
+ CONFIG_SUBDIRS=""
+ _det_config_subdirs="`grep AC_CONFIG_SUBDIRS $CONFIGURE | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
+ for dir in $_det_config_subdirs ; do
+ if test -d "`pwd`/$dir" ; then
+ $VERBOSE_ECHO "Detected recursive configure directory: `pwd`/$dir"
+ CONFIG_SUBDIRS="$CONFIG_SUBDIRS `pwd`/$dir"
+ fi
+ done
+
+ ##########################################
+ # make sure certain required files exist #
+ ##########################################
+ for file in AUTHORS COPYING ChangeLog INSTALL NEWS README ; do
+ if test ! -f $file ; then
+ $VERBOSE_ECHO "Touching ${file} since it does not exist"
+ touch $file
+ fi
+ done
+
+ ##################################################
+ # make sure certain generated files do not exist #
+ ##################################################
+ for file in config.guess config.sub ltmain.sh ; do
+ if test -f "${_aux_dir}/${file}" ; then
+ $VERBOSE_ECHO "mv -f \"${_aux_dir}/${file}\" \"${_aux_dir}/${file}.backup\""
+ mv -f "${_aux_dir}/${file}" "${_aux_dir}/${file}.backup"
+ fi
+ done
+
+ ############################
+ # search alternate m4 dirs #
+ ############################
+ SEARCH_DIRS=""
+ for dir in m4 ; do
+ if [ -d $dir ] ; then
+ $VERBOSE_ECHO "Found extra aclocal search directory: $dir"
+ SEARCH_DIRS="$SEARCH_DIRS -I $dir"
+ fi
+ done
+
+ ######################################
+ # remove any previous build products #
+ ######################################
+ if test -d autom4te.cache ; then
+ $VERBOSE_ECHO "Found an autom4te.cache directory, deleting it"
+ $VERBOSE_ECHO "rm -rf autom4te.cache"
+ rm -rf autom4te.cache
+ fi
+# tcl/tk (and probably others) have a customized aclocal.m4, so can't delete it
+# if test -f aclocal.m4 ; then
+# $VERBOSE_ECHO "Found an aclocal.m4 file, deleting it"
+# $VERBOSE_ECHO "rm -f aclocal.m4"
+# rm -f aclocal.m4
+# fi
+
+} # end of initialize()
+
+
+##############
+# initialize #
+##############
+
+# stash path
+START_PATH="`pwd`"
+
+# Before running autoreconf or manual steps, some prep detection work
+# is necessary or useful. Only needs to occur once per directory, but
+# does need to traverse the entire subconfigure hierarchy to protect
+# files from being clobbered even by autoreconf.
+recursive_protect
+
+# start from where we started
+cd "$START_PATH"
+
+# get ready to process
+initialize
+
+
+############################################
+# prepare build via autoreconf or manually #
+############################################
+reconfigure_manually=no
+if [ "x$HAVE_AUTORECONF" = "xyes" ] ; then
+ $ECHO
+ $ECHO $ECHO_N "Automatically preparing build ... $ECHO_C"
+
+ $VERBOSE_ECHO "$AUTORECONF $SEARCH_DIRS $AUTORECONF_OPTIONS"
+ autoreconf_output="`$AUTORECONF $SEARCH_DIRS $AUTORECONF_OPTIONS 2>&1`"
+ ret=$?
+ $VERBOSE_ECHO "$autoreconf_output"
+
+ if [ ! $ret = 0 ] ; then
+ if [ "x$HAVE_ALT_LIBTOOLIZE" = "xyes" ] ; then
+ if [ ! "x`echo \"$autoreconf_output\" | grep libtoolize | grep \"No such file or directory\"`" = "x" ] ; then
+ $ECHO
+ $ECHO "Warning: autoreconf failed but due to what is usually a common libtool"
+ $ECHO "misconfiguration issue. This problem is encountered on systems that"
+ $ECHO "have installed libtoolize under a different name without providing a"
+ $ECHO "symbolic link or without setting the LIBTOOLIZE environment variable."
+ $ECHO
+ $ECHO "Restarting the preparation steps with LIBTOOLIZE set to $LIBTOOLIZE"
+
+ export LIBTOOLIZE
+ RUN_RECURSIVE=no
+ export RUN_RECURSIVE
+ untrap_abnormal
+
+ $VERBOSE_ECHO sh $AUTOGEN_SH "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9"
+ sh "$AUTOGEN_SH" "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9"
+ exit $?
+ fi
+ fi
+
+ $ECHO "Warning: $AUTORECONF failed"
+
+ if test -f ltmain.sh ; then
+ $ECHO "libtoolize being run by autoreconf is not creating ltmain.sh in the auxillary directory like it should"
+ fi
+
+ $ECHO "Attempting to run the preparation steps individually"
+ reconfigure_manually=yes
+ fi
+else
+ reconfigure_manually=yes
+fi
+
+
+############################
+# LIBTOOL_FAILURE FUNCTION #
+############################
+libtool_failure ( ) {
+
+ # libtool is rather error-prone in comparison to the other
+ # autotools and this routine attempts to compensate for some
+ # common failures. the output after a libtoolize failure is
+ # parsed for an error related to AC_PROG_LIBTOOL and if found, we
+ # attempt to inject a project-provided libtool.m4 file.
+
+ _autoconf_output="$1"
+
+ if [ "x$RUN_RECURSIVE" = "xno" ] ; then
+ # we already tried the libtool.m4, don't try again
+ return 1
+ fi
+
+ if test -f "$LIBTOOL_M4" ; then
+ found_libtool="`$ECHO $_autoconf_output | grep AC_PROG_LIBTOOL`"
+ if test ! "x$found_libtool" = "x" ; then
+ if test -f acinclude.m4 ; then
+ rm -f acinclude.m4.$$.backup
+ $VERBOSE_ECHO "cat acinclude.m4 > acinclude.m4.$$.backup"
+ cat acinclude.m4 > acinclude.m4.$$.backup
+ fi
+ $VERBOSE_ECHO "cat \"$LIBTOOL_M4\" >> acinclude.m4"
+ chmod u+w acinclude.m4
+ cat "$LIBTOOL_M4" >> acinclude.m4
+
+ # don't keep doing this
+ RUN_RECURSIVE=no
+ export RUN_RECURSIVE
+ untrap_abnormal
+
+ $ECHO
+ $ECHO "Restarting the preparation steps with libtool macros in acinclude.m4"
+ $VERBOSE_ECHO sh $AUTOGEN_SH "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9"
+ sh "$AUTOGEN_SH" "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9"
+ exit $?
+ fi
+ fi
+}
+
+
+###########################
+# MANUAL_AUTOGEN FUNCTION #
+###########################
+manual_autogen ( ) {
+
+ ##################################################
+ # Manual preparation steps taken are as follows: #
+ # aclocal [-I m4] #
+ # libtoolize --automake -c -f #
+ # aclocal [-I m4] #
+ # autoconf -f #
+ # autoheader #
+ # automake -a -c -f #
+ ##################################################
+
+ ###########
+ # aclocal #
+ ###########
+ $VERBOSE_ECHO "$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS"
+ aclocal_output="`$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS 2>&1`"
+ ret=$?
+ $VERBOSE_ECHO "$aclocal_output"
+ if [ ! $ret = 0 ] ; then $ECHO "ERROR: $ACLOCAL failed" && exit 2 ; fi
+
+ ##############
+ # libtoolize #
+ ##############
+ need_libtoolize=no
+ for feature in AC_PROG_LIBTOOL LT_INIT ; do
+ $VERBOSE_ECHO "Searching for $feature in $CONFIGURE"
+ found="`grep \"^$feature.*\" $CONFIGURE`"
+ if [ ! "x$found" = "x" ] ; then
+ need_libtoolize=yes
+ break
+ fi
+ done
+ if [ "x$need_libtoolize" = "xyes" ] ; then
+ if [ "x$HAVE_LIBTOOLIZE" = "xyes" ] ; then
+ $VERBOSE_ECHO "$LIBTOOLIZE $LIBTOOLIZE_OPTIONS"
+ libtoolize_output="`$LIBTOOLIZE $LIBTOOLIZE_OPTIONS 2>&1`"
+ ret=$?
+ $VERBOSE_ECHO "$libtoolize_output"
+
+ if [ ! $ret = 0 ] ; then $ECHO "ERROR: $LIBTOOLIZE failed" && exit 2 ; fi
+ else
+ if [ "x$HAVE_ALT_LIBTOOLIZE" = "xyes" ] ; then
+ $VERBOSE_ECHO "$LIBTOOLIZE $ALT_LIBTOOLIZE_OPTIONS"
+ libtoolize_output="`$LIBTOOLIZE $ALT_LIBTOOLIZE_OPTIONS 2>&1`"
+ ret=$?
+ $VERBOSE_ECHO "$libtoolize_output"
+
+ if [ ! $ret = 0 ] ; then $ECHO "ERROR: $LIBTOOLIZE failed" && exit 2 ; fi
+ fi
+ fi
+
+ ###########
+ # aclocal #
+ ###########
+ # re-run again as instructed by libtoolize
+ $VERBOSE_ECHO "$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS"
+ aclocal_output="`$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS 2>&1`"
+ ret=$?
+ $VERBOSE_ECHO "$aclocal_output"
+
+ # libtoolize might put ltmain.sh in the wrong place
+ if test -f ltmain.sh ; then
+ if test ! -f "${_aux_dir}/ltmain.sh" ; then
+ $ECHO
+ $ECHO "Warning: $LIBTOOLIZE is creating ltmain.sh in the wrong directory"
+ $ECHO
+ $ECHO "Fortunately, the problem can be worked around by simply copying the"
+ $ECHO "file to the appropriate location (${_aux_dir}/). This has been done for you."
+ $ECHO
+ $VERBOSE_ECHO "cp -p ltmain.sh \"${_aux_dir}/ltmain.sh\""
+ cp -p ltmain.sh "${_aux_dir}/ltmain.sh"
+ $ECHO $ECHO_N "Continuing build preparation ... $ECHO_C"
+ fi
+ fi # ltmain.sh
+ fi # need_libtoolize
+
+ ############
+ # autoconf #
+ ############
+ $VERBOSE_ECHO
+ $VERBOSE_ECHO "$AUTOCONF $AUTOCONF_OPTIONS"
+ autoconf_output="`$AUTOCONF $AUTOCONF_OPTIONS 2>&1`"
+ ret=$?
+ $VERBOSE_ECHO "$autoconf_output"
+
+ if [ ! $ret = 0 ] ; then
+ # retry without the -f and check for usage of macros that are too new
+ ac2_59_macros="AC_C_RESTRICT AC_INCLUDES_DEFAULT AC_LANG_ASSERT AC_LANG_WERROR AS_SET_CATFILE"
+ ac2_55_macros="AC_COMPILER_IFELSE AC_FUNC_MBRTOWC AC_HEADER_STDBOOL AC_LANG_CONFTEST AC_LANG_SOURCE AC_LANG_PROGRAM AC_LANG_CALL AC_LANG_FUNC_TRY_LINK AC_MSG_FAILURE AC_PREPROC_IFELSE"
+ ac2_54_macros="AC_C_BACKSLASH_A AC_CONFIG_LIBOBJ_DIR AC_GNU_SOURCE AC_PROG_EGREP AC_PROG_FGREP AC_REPLACE_FNMATCH AC_FUNC_FNMATCH_GNU AC_FUNC_REALLOC AC_TYPE_MBSTATE_T"
+
+ macros_to_search=""
+ ac_major="`echo ${AUTOCONF_VERSION}. | cut -d. -f1 | sed 's/[^0-9]//g'`"
+ ac_minor="`echo ${AUTOCONF_VERSION}. | cut -d. -f2 | sed 's/[^0-9]//g'`"
+
+ if [ $ac_major -lt 2 ] ; then
+ macros_to_search="$ac2_59_macros $ac2_55_macros $ac2_54_macros"
+ else
+ if [ $ac_minor -lt 54 ] ; then
+ macros_to_search="$ac2_59_macros $ac2_55_macros $ac2_54_macros"
+ elif [ $ac_minor -lt 55 ] ; then
+ macros_to_search="$ac2_59_macros $ac2_55_macros"
+ elif [ $ac_minor -lt 59 ] ; then
+ macros_to_search="$ac2_59_macros"
+ fi
+ fi
+
+ configure_ac_macros=__none__
+ for feature in $macros_to_search ; do
+ $VERBOSE_ECHO "Searching for $feature in $CONFIGURE"
+ found="`grep \"^$feature.*\" $CONFIGURE`"
+ if [ ! "x$found" = "x" ] ; then
+ if [ "x$configure_ac_macros" = "x__none__" ] ; then
+ configure_ac_macros="$feature"
+ else
+ configure_ac_macros="$feature $configure_ac_macros"
+ fi
+ fi
+ done
+ if [ ! "x$configure_ac_macros" = "x__none__" ] ; then
+ $ECHO
+ $ECHO "Warning: Unsupported macros were found in $CONFIGURE"
+ $ECHO
+ $ECHO "The `echo $CONFIGURE | basename` file was scanned in order to determine if any"
+ $ECHO "unsupported macros are used that exceed the minimum version"
+ $ECHO "settings specified within this file. As such, the following macros"
+ $ECHO "should be removed from configure.ac or the version numbers in this"
+ $ECHO "file should be increased:"
+ $ECHO
+ $ECHO "$configure_ac_macros"
+ $ECHO
+ $ECHO $ECHO_N "Ignorantly continuing build preparation ... $ECHO_C"
+ fi
+
+ ###################
+ # autoconf, retry #
+ ###################
+ $VERBOSE_ECHO
+ $VERBOSE_ECHO "$AUTOCONF"
+ autoconf_output="`$AUTOCONF 2>&1`"
+ ret=$?
+ $VERBOSE_ECHO "$autoconf_output"
+
+ if [ ! $ret = 0 ] ; then
+ # test if libtool is busted
+ libtool_failure "$autoconf_output"
+
+ # let the user know what went wrong
+ cat <<EOF
+$autoconf_output
+EOF
+ $ECHO "ERROR: $AUTOCONF failed"
+ exit 2
+ else
+ # autoconf sans -f and possibly sans unsupported options succeed so warn verbosely
+ $ECHO
+ $ECHO "Warning: autoconf seems to have succeeded by removing the following options:"
+ $ECHO " AUTOCONF_OPTIONS=\"$AUTOCONF_OPTIONS\""
+ $ECHO
+ $ECHO "Removing those options should not be necessary and indicate some other"
+ $ECHO "problem with the build system. The build preparation is highly suspect"
+ $ECHO "and may result in configuration or compilation errors. Consider"
+ if [ "x$VERBOSE_ECHO" = "x:" ] ; then
+ $ECHO "rerunning the build preparation with verbose output enabled."
+ $ECHO " $AUTOGEN_SH --verbose"
+ else
+ $ECHO "reviewing the minimum GNU Autotools version settings contained in"
+ $ECHO "this script along with the macros being used in your `echo $CONFIGURE | basename` file."
+ fi
+ $ECHO
+ $ECHO $ECHO_N "Continuing build preparation ... $ECHO_C"
+ fi # autoconf ret = 0
+ fi # autoconf ret = 0
+
+ ##############
+ # autoheader #
+ ##############
+ need_autoheader=no
+ for feature in AM_CONFIG_HEADER AC_CONFIG_HEADER ; do
+ $VERBOSE_ECHO "Searching for $feature in $CONFIGURE"
+ found="`grep \"^$feature.*\" $CONFIGURE`"
+ if [ ! "x$found" = "x" ] ; then
+ need_autoheader=yes
+ break
+ fi
+ done
+ if [ "x$need_autoheader" = "xyes" ] ; then
+ $VERBOSE_ECHO "$AUTOHEADER $AUTOHEADER_OPTIONS"
+ autoheader_output="`$AUTOHEADER $AUTOHEADER_OPTIONS 2>&1`"
+ ret=$?
+ $VERBOSE_ECHO "$autoheader_output"
+ if [ ! $ret = 0 ] ; then $ECHO "ERROR: $AUTOHEADER failed" && exit 2 ; fi
+ fi # need_autoheader
+
+ ############
+ # automake #
+ ############
+ need_automake=no
+ for feature in AM_INIT_AUTOMAKE ; do
+ $VERBOSE_ECHO "Searching for $feature in $CONFIGURE"
+ found="`grep \"^$feature.*\" $CONFIGURE`"
+ if [ ! "x$found" = "x" ] ; then
+ need_automake=yes
+ break
+ fi
+ done
+
+ if [ "x$need_automake" = "xyes" ] ; then
+ $VERBOSE_ECHO "$AUTOMAKE $AUTOMAKE_OPTIONS"
+ automake_output="`$AUTOMAKE $AUTOMAKE_OPTIONS 2>&1`"
+ ret=$?
+ $VERBOSE_ECHO "$automake_output"
+
+ if [ ! $ret = 0 ] ; then
+
+ ###################
+ # automake, retry #
+ ###################
+ $VERBOSE_ECHO
+ $VERBOSE_ECHO "$AUTOMAKE $ALT_AUTOMAKE_OPTIONS"
+ # retry without the -f
+ automake_output="`$AUTOMAKE $ALT_AUTOMAKE_OPTIONS 2>&1`"
+ ret=$?
+ $VERBOSE_ECHO "$automake_output"
+
+ if [ ! $ret = 0 ] ; then
+ # test if libtool is busted
+ libtool_failure "$automake_output"
+
+ # let the user know what went wrong
+ cat <<EOF
+$automake_output
+EOF
+ $ECHO "ERROR: $AUTOMAKE failed"
+ exit 2
+ fi # automake retry
+ fi # automake ret = 0
+ fi # need_automake
+} # end of manual_autogen
+
+
+#####################################
+# RECURSIVE_MANUAL_AUTOGEN FUNCTION #
+#####################################
+recursive_manual_autogen ( ) {
+
+ # run the build preparation steps manually for this directory
+ manual_autogen
+
+ # for projects using recursive configure, run the build
+ # preparation steps for the subdirectories.
+ if [ ! "x$CONFIG_SUBDIRS" = "x" ] ; then
+ $VERBOSE_ECHO "Recursively configuring the following directories:"
+ $VERBOSE_ECHO " $CONFIG_SUBDIRS"
+ for dir in $CONFIG_SUBDIRS ; do
+ $VERBOSE_ECHO "Processing recursive configure in $dir"
+ cd "$START_PATH"
+ cd "$dir"
+
+ # new directory, prepare
+ initialize
+
+ # run manual steps for the subdir and any others below
+ recursive_manual_autogen
+ done
+ fi
+}
+
+
+################################
+# run manual preparation steps #
+################################
+if [ "x$reconfigure_manually" = "xyes" ] ; then
+ $ECHO
+ $ECHO $ECHO_N "Preparing build ... $ECHO_C"
+
+ recursive_manual_autogen
+fi
+
+
+#########################
+# restore and summarize #
+#########################
+cd "$START_PATH"
+
+# restore COPYING and INSTALL from backup if necessary
+recursive_restore
+
+# make sure we end up with a configure script
+config_ac="`locate_configure_template`"
+config="`echo $config_ac | sed 's/\.ac$//' | sed 's/\.in$//'`"
+if [ "x$config" = "x" ] ; then
+ $VERBOSE_ECHO "Could not locate the configure template (from `pwd`)"
+fi
+
+# summarize
+$ECHO "done"
+$ECHO
+if test "x$config" = "x" -o ! -f "$config" ; then
+ $ECHO "WARNING: The $PROJECT build system should now be prepared but there"
+ $ECHO "does not seem to be a resulting configure file. This is unexpected"
+ $ECHO "and likely the result of an error. You should run $NAME_OF_AUTOGEN"
+ $ECHO "with the --verbose option to get more details on a potential"
+ $ECHO "misconfiguration."
+else
+ $ECHO "The $PROJECT build system is now prepared. To build here, run:"
+ $ECHO " $config"
+ $ECHO " make"
+fi
+
+
+# Local Variables:
+# mode: sh
+# tab-width: 8
+# sh-basic-offset: 4
+# sh-indentation: 4
+# indent-tabs-mode: t
+# End:
+# ex: shiftwidth=4 tabstop=8
projects / chaz / yoink / commitdiff
