base64_map[(int) base_64_digits[i]] = i;
}
-/*-----------------------------------.
-| Main loop for reading an archive. |
-`-----------------------------------*/
-
+/* Main loop for reading an archive. */
void
read_and (void (*do_something) ())
{
< newer_mtime_option))
|| excluded_name (current_file_name))
{
- char save_typeflag = current_header->header.typeflag;
- switch (save_typeflag)
+ switch (current_header->header.typeflag)
{
case GNUTYPE_VOLHDR:
case GNUTYPE_MULTIVOL:
quotearg_colon (current_file_name)));
/* Fall through. */
default:
-
- /* Skip past it in the archive. */
-
- set_next_block_after (current_header);
- if (current_header->oldgnu_header.isextended)
- skip_extended_headers ();
-
- /* Skip to the next header on the archive. */
-
- if (save_typeflag != DIRTYPE)
- skip_file (current_stat.st_size);
+ skip_member ();
continue;
}
}
- apply_nonancestor_delayed_set_stat (current_file_name);
(*do_something) ();
continue;
break;
}
- apply_delayed_set_stat ();
close_archive ();
names_notfound (); /* print names not found */
}
-/*---------------------------------------------.
-| Print a header block, based on tar options. |
-`---------------------------------------------*/
-
+/* Print a header block, based on tar options. */
void
list_archive (void)
{
}
- /* Skip past the header in the archive, and past any extended headers. */
-
- set_next_block_after (current_header);
- if (current_header->oldgnu_header.isextended)
- skip_extended_headers ();
-
if (multi_volume_option)
assign_string (&save_name, current_file_name);
- /* Skip to the next header on the archive. */
-
- skip_file (current_stat.st_size);
+ skip_member ();
if (multi_volume_option)
assign_string (&save_name, 0);
}
-/*-----------------------------------------------------------------------.
-| Read a block that's supposed to be a header block. Return its address |
-| in "current_header", and if it is good, the file's size in |
-| current_stat.st_size. |
-| |
-| Return 1 for success, 0 if the checksum is bad, EOF on eof, 2 for a |
-| block full of zeros (EOF marker). |
-| |
-| You must always set_next_block_after(current_header) to skip past the |
-| header which this routine reads. |
-`-----------------------------------------------------------------------*/
+/* Read a block that's supposed to be a header block. Return its
+ address in "current_header", and if it is good, the file's size in
+ current_stat.st_size.
+
+ Return 1 for success, 0 if the checksum is bad, EOF on eof, 2 for a
+ block full of zeros (EOF marker).
+
+ You must always set_next_block_after(current_header) to skip past
+ the header which this routine reads. */
/* The standard BSD tar sources create the checksum by adding up the
bytes in the header as type char. I think the type char was unsigned
for (i = sizeof *header; i-- != 0;)
{
unsigned_sum += (unsigned char) *p;
- signed_sum += signed_char (*p++);
+ signed_sum += (signed char) (*p++);
}
if (unsigned_sum == 0)
for (i = sizeof header->header.chksum; i-- != 0;)
{
unsigned_sum -= (unsigned char) header->header.chksum[i];
- signed_sum -= signed_char (header->header.chksum[i]);
+ signed_sum -= (signed char) (header->header.chksum[i]);
}
unsigned_sum += ' ' * sizeof header->header.chksum;
signed_sum += ' ' * sizeof header->header.chksum;
}
else
{
- char *name;
- struct posix_header *h = ¤t_header->header;
+ char const *name;
+ struct posix_header const *h = ¤t_header->header;
char namebuf[sizeof h->prefix + 1 + NAME_FIELD_SIZE + 1];
name = next_long_name;
{
/* Accept file names as specified by POSIX.1-1996
section 10.1.1. */
- int posix_header = strcmp (h->magic, TMAGIC) == 0;
char *np = namebuf;
- if (posix_header && h->prefix[0])
+ if (h->prefix[0] && strcmp (h->magic, TMAGIC) == 0)
{
memcpy (np, h->prefix, sizeof h->prefix);
np[sizeof h->prefix] = '\0';
np += strlen (np);
*np++ = '/';
+
+ /* Prevent later references to current_header from
+ mistakenly treating this as an old GNU header.
+ This assignment invalidates h->prefix. */
+ current_header->oldgnu_header.isextended = 0;
}
memcpy (np, h->name, sizeof h->name);
np[sizeof h->name] = '\0';
}
}
-/*-------------------------------------------------------------------------.
-| Decode things from a file HEADER block into STAT_INFO, also setting |
-| *FORMAT_POINTER depending on the header block format. If DO_USER_GROUP, |
-| decode the user/group information (this is useful for extraction, but |
-| waste time when merely listing). |
-| |
-| read_header() has already decoded the checksum and length, so we don't. |
-| |
-| This routine should *not* be called twice for the same block, since the |
-| two calls might use different DO_USER_GROUP values and thus might end up |
-| with different uid/gid for the two calls. If anybody wants the uid/gid |
-| they should decode it first, and other callers should decode it without |
-| uid/gid before calling a routine, e.g. print_header, that assumes |
-| decoded data. |
-`-------------------------------------------------------------------------*/
+/* Decode things from a file HEADER block into STAT_INFO, also setting
+ *FORMAT_POINTER depending on the header block format. If
+ DO_USER_GROUP, decode the user/group information (this is useful
+ for extraction, but waste time when merely listing).
+ read_header() has already decoded the checksum and length, so we don't.
+
+ This routine should *not* be called twice for the same block, since
+ the two calls might use different DO_USER_GROUP values and thus
+ might end up with different uid/gid for the two calls. If anybody
+ wants the uid/gid they should decode it first, and other callers
+ should decode it without uid/gid before calling a routine,
+ e.g. print_header, that assumes decoded data. */
void
decode_header (union block *header, struct stat *stat_info,
enum archive_format *format_pointer, int do_user_group)
}
}
-/*------------------------------------------------------------------------.
-| Convert buffer at WHERE0 of size DIGS from external format to uintmax_t.|
-| The data is of type TYPE. The buffer must represent a value in the |
-| range -MINUS_MINVAL through MAXVAL. DIGS must be positive. |
-`------------------------------------------------------------------------*/
-
+/* Convert buffer at WHERE0 of size DIGS from external format to
+ uintmax_t. The data is of type TYPE. The buffer must represent a
+ value in the range -MINUS_MINVAL through MAXVAL. DIGS must be
+ positive. */
static uintmax_t
from_header (char const *where0, size_t digs, char const *type,
uintmax_t minus_minval, uintmax_t maxval)
{
if (value << LG_64 >> LG_64 != value)
{
+ char *string = alloca (digs + 1);
+ memcpy (string, where0, digs);
+ string[digs] = '\0';
ERROR ((0, 0,
- _("Archive signed base-64 string `%.*s' is out of %s range"),
- (int) digs, where0, type));
+ _("Archive signed base-64 string %s is out of %s range"),
+ quote (string), type));
return -1;
}
value = (value << LG_64) | dig;
time_t
time_from_header (const char *p, size_t s)
{
- time_t t = from_header (p, s, "time_t",
- - (uintmax_t) TYPE_MINIMUM (time_t),
- (uintmax_t) TYPE_MAXIMUM (time_t));
- if (start_time < t && time (0) < t)
- WARN ((0, 0, _("Archive contains future timestamp %s"), tartime (t)));
- return t;
+ return from_header (p, s, "time_t",
+ - (uintmax_t) TYPE_MINIMUM (time_t),
+ (uintmax_t) TYPE_MAXIMUM (time_t));
}
uid_t
}
-/*----------------------------------------------------------------------.
-| Format O as a null-terminated decimal string into BUF _backwards_; |
-| return pointer to start of result. |
-`----------------------------------------------------------------------*/
+/* Format O as a null-terminated decimal string into BUF _backwards_;
+ return pointer to start of result. */
char *
stringify_uintmax_t_backwards (uintmax_t o, char *buf)
{
if (p)
{
char const *time_stamp = p + 4;
- for (p += 16; p[4] != '\n'; p++)
- p[0] = p[4];
+ for (p += 16; p[3] != '\n'; p++)
+ p[0] = p[3];
p[0] = '\0';
return time_stamp;
}
return p;
}
-/*-------------------------------------------------------------------------.
-| Actually print it. |
-| |
-| Plain and fancy file header block logging. Non-verbose just prints the |
-| name, e.g. for "tar t" or "tar x". This should just contain file names, |
-| so it can be fed back into tar with xargs or the "-T" option. The |
-| verbose option can give a bunch of info, one line per file. I doubt |
-| anybody tries to parse its format, or if they do, they shouldn't. Unix |
-| tar is pretty random here anyway. |
-`-------------------------------------------------------------------------*/
+/* Actually print it.
+
+ Plain and fancy file header block logging. Non-verbose just prints
+ the name, e.g. for "tar t" or "tar x". This should just contain
+ file names, so it can be fed back into tar with xargs or the "-T"
+ option. The verbose option can give a bunch of info, one line per
+ file. I doubt anybody tries to parse its format, or if they do,
+ they shouldn't. Unix tar is pretty random here anyway. */
+
/* FIXME: Note that print_header uses the globals HEAD, HSTAT, and
HEAD_STANDARD, which must be set up in advance. Not very clean... */
break;
default:
- fprintf (stdlis, _(" unknown file type `%c'\n"),
- current_header->header.typeflag);
+ {
+ char type_string[2];
+ type_string[0] = current_header->header.typeflag;
+ type_string[1] = '\0';
+ fprintf (stdlis, _(" unknown file type %s\n"),
+ quote (type_string));
+ }
break;
case AREGTYPE:
fflush (stdlis);
}
-/*--------------------------------------------------------------.
-| Print a similar line when we make a directory automatically. |
-`--------------------------------------------------------------*/
-
+/* Print a similar line when we make a directory automatically. */
void
print_for_mkdir (char *pathname, int length, mode_t mode)
{
}
}
-/*--------------------------------------------------------.
-| Skip over SIZE bytes of data in blocks in the archive. |
-`--------------------------------------------------------*/
-
+/* Skip over SIZE bytes of data in blocks in the archive. */
void
skip_file (off_t size)
{
}
}
-/*---.
-| ? |
-`---*/
-
+/* Skip the current member in the archive. */
void
-skip_extended_headers (void)
+skip_member (void)
{
- union block *exhdr;
+ char save_typeflag = current_header->header.typeflag;
+ set_next_block_after (current_header);
- do
+ if (current_header->oldgnu_header.isextended)
{
- exhdr = find_next_block ();
- if (!exhdr)
- FATAL_ERROR ((0, 0, _("Unexpected EOF in archive")));
- set_next_block_after (exhdr);
+ union block *exhdr;
+ do
+ {
+ exhdr = find_next_block ();
+ if (!exhdr)
+ FATAL_ERROR ((0, 0, _("Unexpected EOF in archive")));
+ set_next_block_after (exhdr);
+ }
+ while (exhdr->sparse_header.isextended);
}
- while (exhdr->sparse_header.isextended);
+
+ if (save_typeflag != DIRTYPE)
+ skip_file (current_stat.st_size);
}
projects / chaz / tar / commitdiff
