/* Functions for communicating with a remote tape drive.
- Copyright (C) 1988, 1992 Free Software Foundation, Inc.
+ Copyright (C) 1988, 1992, 1994, 1996 Free Software Foundation, Inc.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-
-/* The man page rmt(8) for /etc/rmt documents the remote mag tape
- protocol which rdump and rrestore use. Unfortunately, the man
- page is *WRONG*. The author of the routines I'm including originally
- wrote his code just based on the man page, and it didn't work, so he
- went to the rdump source to figure out why. The only thing he had to
- change was to check for the 'F' return code in addition to the 'E',
- and to separate the various arguments with \n instead of a space. I
- personally don't think that this is much of a problem, but I wanted to
- point it out. -- Arnold Robbins
-
- Originally written by Jeff Lee, modified some by Arnold Robbins.
- Redone as a library that can replace open, read, write, etc., by
- Fred Fish, with some additional work by Arnold Robbins.
- Modified to make all rmtXXX calls into macros for speed by Jay Fenlason.
- Use -DHAVE_NETDB_H for rexec code, courtesy of Dan Kegel, srs!dan. */
-
-#include <stdio.h>
-#include <sys/types.h>
-#include <signal.h>
-
-#ifdef HAVE_SYS_MTIO_H
-#include <sys/ioctl.h>
-#include <sys/mtio.h>
-#endif
-
-#ifdef HAVE_NETDB_H
-#include <netdb.h>
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+
+/* The man page rmt(8) for /etc/rmt documents the remote mag tape protocol
+ which rdump and rrestore use. Unfortunately, the man page is *WRONG*.
+ The author of the routines I'm including originally wrote his code just
+ based on the man page, and it didn't work, so he went to the rdump source
+ to figure out why. The only thing he had to change was to check for the
+ 'F' return code in addition to the 'E', and to separate the various
+ arguments with \n instead of a space. I personally don't think that this
+ is much of a problem, but I wanted to point it out. -- Arnold Robbins
+
+ Originally written by Jeff Lee, modified some by Arnold Robbins. Redone
+ as a library that can replace open, read, write, etc., by Fred Fish, with
+ some additional work by Arnold Robbins. Modified to make all rmt* calls
+ into macros for speed by Jay Fenlason. Use -DHAVE_NETDB_H for rexec
+ code, courtesy of Dan Kegel. */
+
+#include "system.h"
+
+/* Try hard to get EOPNOTSUPP defined. 486/ISC has it in net/errno.h,
+ 3B2/SVR3 has it in sys/inet.h. Otherwise, like on MSDOS, use EINVAL. */
+
+#ifndef EOPNOTSUPP
+# if HAVE_NET_ERRNO_H
+# include <net/errno.h>
+# endif
+# if HAVE_SYS_INET_H
+# include <sys/inet.h>
+# endif
+# ifndef EOPNOTSUPP
+# define EOPNOTSUPP EINVAL
+# endif
#endif
-#include <errno.h>
-#include <setjmp.h>
-#include <sys/stat.h>
+#include <signal.h>
-#ifndef errno
-extern int errno;
+#if HAVE_NETDB_H
+# include <netdb.h>
#endif
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-#ifdef STDC_HEADERS
-#include <string.h>
-#include <stdlib.h>
-#endif
+#include "rmt.h"
-/* Maximum size of a fully qualified host name. */
-#define MAXHOSTLEN 257
+/* FIXME: Just to shut up -Wall. */
+int rexec ();
-/* Size of buffers for reading and writing commands to rmt.
- (An arbitrary limit.) */
-#define CMDBUFSIZE 64
+/* Exit status if exec errors. */
+#define EXIT_ON_EXEC_ERROR 128
+
+/* FIXME: Size of buffers for reading and writing commands to rmt. */
+#define COMMAND_BUFFER_SIZE 64
#ifndef RETSIGTYPE
-#define RETSIGTYPE void
+# define RETSIGTYPE void
#endif
-/* Maximum number of simultaneous remote tape connections.
- (Another arbitrary limit.) */
+/* FIXME: Maximum number of simultaneous remote tape connections. */
#define MAXUNIT 4
-/* Return the parent's read side of remote tape connection FILDES. */
-#define READ(fildes) (from_rmt[fildes][0])
+#define PREAD 0 /* read file descriptor from pipe() */
+#define PWRITE 1 /* write file descriptor from pipe() */
+
+/* Return the parent's read side of remote tape connection Fd. */
+#define READ_SIDE(Fd) (from_remote[Fd][PREAD])
-/* Return the parent's write side of remote tape connection FILDES. */
-#define WRITE(fildes) (to_rmt[fildes][1])
+/* Return the parent's write side of remote tape connection Fd. */
+#define WRITE_SIDE(Fd) (to_remote[Fd][PWRITE])
/* The pipes for receiving data from remote tape drives. */
-static int from_rmt[MAXUNIT][2] =
-{-1, -1, -1, -1, -1, -1, -1, -1};
+static int from_remote[MAXUNIT][2] = {{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}};
/* The pipes for sending data to remote tape drives. */
-static int to_rmt[MAXUNIT][2] =
-{-1, -1, -1, -1, -1, -1, -1, -1};
+static int to_remote[MAXUNIT][2] = {{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}};
/* Temporary variable used by macros in rmt.h. */
-char *__rmt_path;
+char *rmt_path__;
\f
-/* Close remote tape connection FILDES. */
+
+/*----------------------------------------------------------------------.
+| Close remote tape connection HANDLE, and reset errno to ERRNO_VALUE. |
+`----------------------------------------------------------------------*/
static void
-_rmt_shutdown (fildes)
- int fildes;
+_rmt_shutdown (int handle, int errno_value)
{
- close (READ (fildes));
- close (WRITE (fildes));
- READ (fildes) = -1;
- WRITE (fildes) = -1;
+ close (READ_SIDE (handle));
+ close (WRITE_SIDE (handle));
+ READ_SIDE (handle) = -1;
+ WRITE_SIDE (handle) = -1;
+ errno = errno_value; /* FIXME: errno should be read-only */
}
-/* Attempt to perform the remote tape command specified in BUF
- on remote tape connection FILDES.
- Return 0 if successful, -1 on error. */
+/*-------------------------------------------------------------------------.
+| Attempt to perform the remote tape command specified in BUFFER on remote |
+| tape connection HANDLE. Return 0 if successful, -1 on error. |
+`-------------------------------------------------------------------------*/
static int
-command (fildes, buf)
- int fildes;
- char *buf;
+do_command (int handle, const char *buffer)
{
- register int buflen;
+ int length;
RETSIGTYPE (*pipe_handler) ();
/* Save the current pipe handler and try to make the request. */
pipe_handler = signal (SIGPIPE, SIG_IGN);
- buflen = strlen (buf);
- if (write (WRITE (fildes), buf, buflen) == buflen)
+ length = strlen (buffer);
+ if (write (WRITE_SIDE (handle), buffer, (size_t) length) == length)
{
signal (SIGPIPE, pipe_handler);
return 0;
/* Something went wrong. Close down and go home. */
signal (SIGPIPE, pipe_handler);
- _rmt_shutdown (fildes);
- errno = EIO;
+ _rmt_shutdown (handle, EIO);
return -1;
}
-/* Read and return the status from remote tape connection FILDES.
- If an error occurred, return -1 and set errno. */
+/*----------------------------------------------------------------------.
+| Read and return the status from remote tape connection HANDLE. If an |
+| error occurred, return -1 and set errno. |
+`----------------------------------------------------------------------*/
static int
-status (fildes)
- int fildes;
+get_status (int handle)
{
- int i;
- char c, *cp;
- char buffer[CMDBUFSIZE];
+ char command_buffer[COMMAND_BUFFER_SIZE];
+ char *cursor;
+ int counter;
/* Read the reply command line. */
- for (i = 0, cp = buffer; i < CMDBUFSIZE; i++, cp++)
+ for (counter = 0, cursor = command_buffer;
+ counter < COMMAND_BUFFER_SIZE;
+ counter++, cursor++)
{
- if (read (READ (fildes), cp, 1) != 1)
+ if (read (READ_SIDE (handle), cursor, 1) != 1)
{
- _rmt_shutdown (fildes);
- errno = EIO;
+ _rmt_shutdown (handle, EIO);
return -1;
}
- if (*cp == '\n')
+ if (*cursor == '\n')
{
- *cp = '\0';
+ *cursor = '\0';
break;
}
}
- if (i == CMDBUFSIZE)
+ if (counter == COMMAND_BUFFER_SIZE)
{
- _rmt_shutdown (fildes);
- errno = EIO;
+ _rmt_shutdown (handle, EIO);
return -1;
}
/* Check the return status. */
- for (cp = buffer; *cp; cp++)
- if (*cp != ' ')
+ for (cursor = command_buffer; *cursor; cursor++)
+ if (*cursor != ' ')
break;
- if (*cp == 'E' || *cp == 'F')
+ if (*cursor == 'E' || *cursor == 'F')
{
- errno = atoi (cp + 1);
+ errno = atoi (cursor + 1); /* FIXME: errno should be read-only */
+
/* Skip the error message line. */
- while (read (READ (fildes), &c, 1) == 1)
- if (c == '\n')
- break;
- if (*cp == 'F')
- _rmt_shutdown (fildes);
+ /* FIXME: there is better to do than merely ignoring error messages
+ coming from the remote end. Translate them, too... */
+
+ {
+ char character;
+
+ while (read (READ_SIDE (handle), &character, 1) == 1)
+ if (character == '\n')
+ break;
+ }
+
+ if (*cursor == 'F')
+ _rmt_shutdown (handle, errno);
return -1;
}
- /* Check for mis-synced pipes. */
+ /* Check for mis-synced pipes. */
- if (*cp != 'A')
+ if (*cursor != 'A')
{
- _rmt_shutdown (fildes);
- errno = EIO;
+ _rmt_shutdown (handle, EIO);
return -1;
}
/* Got an `A' (success) response. */
- return atoi (cp + 1);
+
+ return atoi (cursor + 1);
}
-#ifdef HAVE_NETDB_H
-/* Execute /etc/rmt as user USER on remote system HOST using rexec.
- Return a file descriptor of a bidirectional socket for stdin and stdout.
- If USER is NULL, or an empty string, use the current username.
+#if HAVE_NETDB_H
- By default, this code is not used, since it requires that
- the user have a .netrc file in his/her home directory, or that the
- application designer be willing to have rexec prompt for login and
- password info. This may be unacceptable, and .rhosts files for use
- with rsh are much more common on BSD systems. */
+/*-------------------------------------------------------------------------.
+| Execute /etc/rmt as user USER on remote system HOST using rexec. Return |
+| a file descriptor of a bidirectional socket for stdin and stdout. If |
+| USER is NULL, use the current username. |
+| |
+| By default, this code is not used, since it requires that the user have |
+| a .netrc file in his/her home directory, or that the application |
+| designer be willing to have rexec prompt for login and password info. |
+| This may be unacceptable, and .rhosts files for use with rsh are much |
+| more common on BSD systems. |
+`-------------------------------------------------------------------------*/
static int
-_rmt_rexec (host, user)
- char *host;
- char *user;
+_rmt_rexec (char *host, char *user)
{
+ int saved_stdin = dup (fileno (stdin));
+ int saved_stdout = dup (fileno (stdout));
struct servent *rexecserv;
- int save_stdin = dup (fileno (stdin));
- int save_stdout = dup (fileno (stdout));
- int tape_fd; /* Return value. */
-
- /* When using cpio -o < filename, stdin is no longer the tty.
- But the rexec subroutine reads the login and the passwd on stdin,
- to allow remote execution of the command.
- So, reopen stdin and stdout on /dev/tty before the rexec and
- give them back their original value after. */
+ int result;
+
+ /* When using cpio -o < filename, stdin is no longer the tty. But the
+ rexec subroutine reads the login and the passwd on stdin, to allow
+ remote execution of the command. So, reopen stdin and stdout on
+ /dev/tty before the rexec and give them back their original value
+ after. */
+
if (freopen ("/dev/tty", "r", stdin) == NULL)
freopen ("/dev/null", "r", stdin);
if (freopen ("/dev/tty", "w", stdout) == NULL)
freopen ("/dev/null", "w", stdout);
- rexecserv = getservbyname ("exec", "tcp");
- if (NULL == rexecserv)
- {
- fprintf (stderr, "exec/tcp: service not available");
- exit (1);
- }
- if (user != NULL && *user == '\0')
- user = NULL;
- tape_fd = rexec (&host, rexecserv->s_port, user, NULL,
- "/etc/rmt", (int *) NULL);
- fclose (stdin);
- fdopen (save_stdin, "r");
- fclose (stdout);
- fdopen (save_stdout, "w");
+ if (rexecserv = getservbyname ("exec", "tcp"), !rexecserv)
+ error (EXIT_ON_EXEC_ERROR, 0, _("exec/tcp: Service not available"));
- return tape_fd;
+ result = rexec (&host, rexecserv->s_port, user, NULL,
+ "/etc/rmt", (int *) NULL);
+ if (fclose (stdin) == EOF)
+ error (0, errno, _("stdin"));
+ fdopen (saved_stdin, "r");
+ if (fclose (stdout) == EOF)
+ error (0, errno, _("stdout"));
+ fdopen (saved_stdout, "w");
+
+ return result;
}
#endif /* HAVE_NETDB_H */
-/* Open a magtape device on the system specified in PATH, as the given user.
- PATH has the form `[user@]system:/dev/????'.
- If COMPAT is defined, it can also have the form `system[.user]:/dev/????'.
-
- OFLAG is O_RDONLY, O_WRONLY, etc.
- MODE is ignored; 0666 is always used.
-
- If successful, return the remote tape pipe number plus BIAS.
- On error, return -1. */
+/*------------------------------------------------------------------------.
+| Open a file (a magnetic tape device?) on the system specified in PATH, |
+| as the given user. PATH has the form `[USER@]HOST:FILE'. OPEN_MODE is |
+| O_RDONLY, O_WRONLY, etc. If successful, return the remote pipe number |
+| plus BIAS. REMOTE_SHELL may be overriden. On error, return -1. |
+`------------------------------------------------------------------------*/
int
-__rmt_open (path, oflag, mode, bias)
- char *path;
- int oflag;
- int mode;
- int bias;
+rmt_open__ (const char *path, int open_mode, int bias, const char *remote_shell)
{
- int i, rc;
- char buffer[CMDBUFSIZE]; /* Command buffer. */
- char system[MAXHOSTLEN]; /* The remote host name. */
- char device[CMDBUFSIZE]; /* The remote device name. */
- char login[CMDBUFSIZE]; /* The remote user name. */
- char *sys, *dev, *user; /* For copying into the above buffers. */
-
- sys = system;
- dev = device;
- user = login;
+ int remote_pipe_number; /* pseudo, biased file descriptor */
+ char *path_copy ; /* copy of path string */
+ char *remote_host; /* remote host name */
+ char *remote_file; /* remote file name (often a device) */
+ char *remote_user; /* remote user name */
/* Find an unused pair of file descriptors. */
- for (i = 0; i < MAXUNIT; i++)
- if (READ (i) == -1 && WRITE (i) == -1)
+ for (remote_pipe_number = 0;
+ remote_pipe_number < MAXUNIT;
+ remote_pipe_number++)
+ if (READ_SIDE (remote_pipe_number) == -1
+ && WRITE_SIDE (remote_pipe_number) == -1)
break;
- if (i == MAXUNIT)
+ if (remote_pipe_number == MAXUNIT)
{
- errno = EMFILE;
+ errno = EMFILE; /* FIXME: errno should be read-only */
return -1;
}
- /* Pull apart the system and device, and optional user.
- Don't munge the original string. */
+ /* Pull apart the system and device, and optional user. */
- while (*path != '@'
-#ifdef COMPAT
- && *path != '.'
-#endif
- && *path != ':')
- {
- *sys++ = *path++;
- }
- *sys = '\0';
- path++;
+ {
+ char *cursor;
- if (*(path - 1) == '@')
- {
- /* Saw user part of user@host. Start over. */
- strcpy (user, system);
- sys = system;
- while (*path != ':')
- {
- *sys++ = *path++;
- }
- *sys = '\0';
- path++;
- }
-#ifdef COMPAT
- else if (*(path - 1) == '.')
- {
- while (*path != ':')
+ path_copy = xstrdup (path);
+ remote_host = path_copy;
+ remote_user = NULL;
+ remote_file = NULL;
+
+ for (cursor = path_copy; *cursor; cursor++)
+ switch (*cursor)
{
- *user++ = *path++;
+ default:
+ break;
+
+ case '@':
+ if (!remote_user)
+ {
+ remote_user = remote_host;
+ *cursor = '\0';
+ remote_host = cursor + 1;
+ }
+ break;
+
+ case ':':
+ if (!remote_file)
+ {
+ *cursor = '\0';
+ remote_file = cursor + 1;
+ }
+ break;
}
- *user = '\0';
- path++;
- }
-#endif
- else
- *user = '\0';
+ }
+
+ /* FIXME: Should somewhat validate the decoding, here. */
+
+ if (remote_user && *remote_user == '\0')
+ remote_user = NULL;
- while (*path)
+#if HAVE_NETDB_H
+
+ /* Execute the remote command using rexec. */
+
+ READ_SIDE (remote_pipe_number) = _rmt_rexec (remote_host, remote_user);
+ if (READ_SIDE (remote_pipe_number) < 0)
{
- *dev++ = *path++;
+ free (path_copy);
+ return -1;
}
- *dev = '\0';
-#ifdef HAVE_NETDB_H
- /* Execute the remote command using rexec. */
- READ (i) = WRITE (i) = _rmt_rexec (system, login);
- if (READ (i) < 0)
- return -1;
-#else /* !HAVE_NETDB_H */
- /* Set up the pipes for the `rsh' command, and fork. */
+ WRITE_SIDE (remote_pipe_number) = READ_SIDE (remote_pipe_number);
- if (pipe (to_rmt[i]) == -1 || pipe (from_rmt[i]) == -1)
- return -1;
+#else /* not HAVE_NETDB_H */
+ {
+ const char *remote_shell_basename;
+ int status;
- rc = fork ();
- if (rc == -1)
- return -1;
+ /* Identify the remote command to be executed. */
- if (rc == 0)
- {
- /* Child. */
- close (0);
- dup (to_rmt[i][0]);
- close (to_rmt[i][0]);
- close (to_rmt[i][1]);
+ if (!remote_shell)
+ {
+#ifdef REMOTE_SHELL
+ remote_shell = REMOTE_SHELL;
+#else
+ errno = EIO; /* FIXME: errno should be read-only */
+ free (path_copy);
+ return -1;
+#endif
+ }
+ remote_shell_basename = strrchr (remote_shell, '/');
+ if (remote_shell_basename)
+ remote_shell_basename++;
+ else
+ remote_shell_basename = remote_shell;
+
+ /* Set up the pipes for the `rsh' command, and fork. */
+
+ if (pipe (to_remote[remote_pipe_number]) == -1
+ || pipe (from_remote[remote_pipe_number]) == -1)
+ {
+ free (path_copy);
+ return -1;
+ }
- close (1);
- dup (from_rmt[i][1]);
- close (from_rmt[i][0]);
- close (from_rmt[i][1]);
+ status = fork ();
+ if (status == -1)
+ {
+ free (path_copy);
+ return -1;
+ }
- setuid (getuid ());
- setgid (getgid ());
+ if (status == 0)
+ {
+ /* Child. */
- if (*login)
- {
- execl ("/usr/ucb/rsh", "rsh", system, "-l", login,
- "/etc/rmt", (char *) 0);
- execl ("/usr/bin/remsh", "remsh", system, "-l", login,
- "/etc/rmt", (char *) 0);
- execl ("/usr/bin/rsh", "rsh", system, "-l", login,
- "/etc/rmt", (char *) 0);
- execl ("/usr/bsd/rsh", "rsh", system, "-l", login,
- "/etc/rmt", (char *) 0);
- execl ("/usr/bin/nsh", "nsh", system, "-l", login,
- "/etc/rmt", (char *) 0);
- }
- else
- {
- execl ("/usr/ucb/rsh", "rsh", system,
- "/etc/rmt", (char *) 0);
- execl ("/usr/bin/remsh", "remsh", system,
- "/etc/rmt", (char *) 0);
- execl ("/usr/bin/rsh", "rsh", system,
- "/etc/rmt", (char *) 0);
- execl ("/usr/bsd/rsh", "rsh", system,
- "/etc/rmt", (char *) 0);
- execl ("/usr/bin/nsh", "nsh", system,
+ close (0);
+ dup (to_remote[remote_pipe_number][PREAD]);
+ close (to_remote[remote_pipe_number][PREAD]);
+ close (to_remote[remote_pipe_number][PWRITE]);
+
+ close (1);
+ dup (from_remote[remote_pipe_number][PWRITE]);
+ close (from_remote[remote_pipe_number][PREAD]);
+ close (from_remote[remote_pipe_number][PWRITE]);
+
+#if !MSDOS
+ setuid (getuid ());
+ setgid (getgid ());
+#endif
+
+ if (remote_user)
+ execl (remote_shell, remote_shell_basename, remote_host,
+ "-l", remote_user, "/etc/rmt", (char *) 0);
+ else
+ execl (remote_shell, remote_shell_basename, remote_host,
"/etc/rmt", (char *) 0);
- }
- /* Bad problems if we get here. */
+ /* Bad problems if we get here. */
- perror ("cannot execute remote shell");
- _exit (1);
- }
+ /* In a previous version, _exit was used here instead of exit. */
+ error (EXIT_ON_EXEC_ERROR, errno, _("Cannot execute remote shell"));
+ }
+
+ /* Parent. */
- /* Parent. */
- close (to_rmt[i][0]);
- close (from_rmt[i][1]);
-#endif /* !HAVE_NETDB_H */
+ close (from_remote[remote_pipe_number][PWRITE]);
+ close (to_remote[remote_pipe_number][PREAD]);
+ }
+#endif /* not HAVE_NETDB_H */
/* Attempt to open the tape device. */
- sprintf (buffer, "O%s\n%d\n", device, oflag);
- if (command (i, buffer) == -1 || status (i) == -1)
- return -1;
+ {
+ char command_buffer[COMMAND_BUFFER_SIZE];
- return i + bias;
+ sprintf (command_buffer, "O%s\n%d\n", remote_file, open_mode);
+ if (do_command (remote_pipe_number, command_buffer) == -1
+ || get_status (remote_pipe_number) == -1)
+ {
+ _rmt_shutdown (remote_pipe_number, errno);
+ free (path_copy);
+ return -1;
+ }
+ }
+
+ free (path_copy);
+ return remote_pipe_number + bias;
}
-/* Close remote tape connection FILDES and shut down.
- Return 0 if successful, -1 on error. */
+/*----------------------------------------------------------------.
+| Close remote tape connection HANDLE and shut down. Return 0 if |
+| successful, -1 on error. |
+`----------------------------------------------------------------*/
int
-__rmt_close (fildes)
- int fildes;
+rmt_close__ (int handle)
{
- int rc;
+ int status;
- if (command (fildes, "C\n") == -1)
+ if (do_command (handle, "C\n") == -1)
return -1;
- rc = status (fildes);
- _rmt_shutdown (fildes);
- return rc;
+ status = get_status (handle);
+ _rmt_shutdown (handle, errno);
+ return status;
}
-/* Read up to NBYTE bytes into BUF from remote tape connection FILDES.
- Return the number of bytes read on success, -1 on error. */
+/*-------------------------------------------------------------------------.
+| Read up to LENGTH bytes into BUFFER from remote tape connection HANDLE. |
+| Return the number of bytes read on success, -1 on error. |
+`-------------------------------------------------------------------------*/
int
-__rmt_read (fildes, buf, nbyte)
- int fildes;
- char *buf;
- unsigned int nbyte;
+rmt_read__ (int handle, char *buffer, unsigned int length)
{
- int rc, i;
- char buffer[CMDBUFSIZE];
+ char command_buffer[COMMAND_BUFFER_SIZE];
+ int status;
+ int counter;
- sprintf (buffer, "R%d\n", nbyte);
- if (command (fildes, buffer) == -1 || (rc = status (fildes)) == -1)
+ sprintf (command_buffer, "R%d\n", length);
+ if (do_command (handle, command_buffer) == -1
+ || (status = get_status (handle)) == -1)
return -1;
- for (i = 0; i < rc; i += nbyte, buf += nbyte)
+ for (counter = 0; counter < status; counter += length, buffer += length)
{
- nbyte = read (READ (fildes), buf, rc - i);
- if (nbyte <= 0)
+ length = read (READ_SIDE (handle), buffer, (size_t) (status - counter));
+ if (length <= 0)
{
- _rmt_shutdown (fildes);
- errno = EIO;
+ _rmt_shutdown (handle, EIO);
return -1;
}
}
- return rc;
+ return status;
}
-/* Write NBYTE bytes from BUF to remote tape connection FILDES.
- Return the number of bytes written on success, -1 on error. */
+/*-------------------------------------------------------------------------.
+| Write LENGTH bytes from BUFFER to remote tape connection HANDLE. Return |
+| the number of bytes written on success, -1 on error. |
+`-------------------------------------------------------------------------*/
int
-__rmt_write (fildes, buf, nbyte)
- int fildes;
- char *buf;
- unsigned int nbyte;
+rmt_write__ (int handle, char *buffer, unsigned int length)
{
- char buffer[CMDBUFSIZE];
+ char command_buffer[COMMAND_BUFFER_SIZE];
RETSIGTYPE (*pipe_handler) ();
- sprintf (buffer, "W%d\n", nbyte);
- if (command (fildes, buffer) == -1)
+ sprintf (command_buffer, "W%d\n", length);
+ if (do_command (handle, command_buffer) == -1)
return -1;
pipe_handler = signal (SIGPIPE, SIG_IGN);
- if (write (WRITE (fildes), buf, nbyte) == nbyte)
+ if (write (WRITE_SIDE (handle), buffer, length) == length)
{
signal (SIGPIPE, pipe_handler);
- return status (fildes);
+ return get_status (handle);
}
/* Write error. */
+
signal (SIGPIPE, pipe_handler);
- _rmt_shutdown (fildes);
- errno = EIO;
+ _rmt_shutdown (handle, EIO);
return -1;
}
-/* Perform an imitation lseek operation on remote tape connection FILDES.
- Return the new file offset if successful, -1 if on error. */
+/*------------------------------------------------------------------------.
+| Perform an imitation lseek operation on remote tape connection HANDLE. |
+| Return the new file offset if successful, -1 if on error. |
+`------------------------------------------------------------------------*/
long
-__rmt_lseek (fildes, offset, whence)
- int fildes;
- long offset;
- int whence;
+rmt_lseek__ (int handle, off_t offset, int whence)
{
- char buffer[CMDBUFSIZE];
+ char command_buffer[COMMAND_BUFFER_SIZE];
- sprintf (buffer, "L%ld\n%d\n", offset, whence);
- if (command (fildes, buffer) == -1)
+ sprintf (command_buffer, "L%ld\n%d\n", offset, whence);
+ if (do_command (handle, command_buffer) == -1)
return -1;
- return status (fildes);
+ return get_status (handle);
}
-/* Perform a raw tape operation on remote tape connection FILDES.
- Return the results of the ioctl, or -1 on error. */
+/*-----------------------------------------------------------------------.
+| Perform a raw tape operation on remote tape connection HANDLE. Return |
+| the results of the ioctl, or -1 on error. |
+`-----------------------------------------------------------------------*/
-#ifdef MTIOCTOP
int
-__rmt_ioctl (fildes, op, arg)
- int fildes, op;
- char *arg;
+rmt_ioctl__ (int handle, int operation, char *argument)
{
- char c;
- int rc, cnt;
- char buffer[CMDBUFSIZE];
-
- switch (op)
+ switch (operation)
{
default:
- errno = EINVAL;
+ errno = EOPNOTSUPP; /* FIXME: errno should be read-only */
return -1;
+#ifdef MTIOCTOP
case MTIOCTOP:
- /* MTIOCTOP is the easy one. Nothing is transfered in binary. */
- sprintf (buffer, "I%d\n%d\n", ((struct mtop *) arg)->mt_op,
- ((struct mtop *) arg)->mt_count);
- if (command (fildes, buffer) == -1)
- return -1;
- return status (fildes); /* Return the count. */
+ {
+ char command_buffer[COMMAND_BUFFER_SIZE];
+ /* MTIOCTOP is the easy one. Nothing is transfered in binary. */
+
+ sprintf (command_buffer, "I%d\n%d\n", ((struct mtop *) argument)->mt_op,
+ ((struct mtop *) argument)->mt_count);
+ if (do_command (handle, command_buffer) == -1)
+ return -1;
+
+ /* Return the count. */
+
+ return get_status (handle);
+ }
+#endif /* MTIOCTOP */
+
+#ifdef MTIOCGET
case MTIOCGET:
- /* Grab the status and read it directly into the structure.
- This assumes that the status buffer is not padded
- and that 2 shorts fit in a long without any word
- alignment problems; i.e., the whole struct is contiguous.
- NOTE - this is probably NOT a good assumption. */
+ {
+ int status;
+ int counter;
+
+ /* Grab the status and read it directly into the structure. This
+ assumes that the status buffer is not padded and that 2 shorts
+ fit in a long without any word alignment problems; i.e., the
+ whole struct is contiguous. NOTE - this is probably NOT a good
+ assumption. */
+
+ if (do_command (handle, "S") == -1
+ || (status = get_status (handle), status == -1))
+ return -1;
- if (command (fildes, "S") == -1 || (rc = status (fildes)) == -1)
- return -1;
+ for (; status > 0; status -= counter, argument += counter)
+ {
+ counter = read (READ_SIDE (handle), argument, (size_t) status);
+ if (counter <= 0)
+ {
+ _rmt_shutdown (handle, EIO);
+ return -1;
+ }
+ }
- for (; rc > 0; rc -= cnt, arg += cnt)
- {
- cnt = read (READ (fildes), arg, rc);
- if (cnt <= 0)
- {
- _rmt_shutdown (fildes);
- errno = EIO;
- return -1;
- }
- }
+ /* Check for byte position. mt_type (or mt_model) is a small integer
+ field (normally) so we will check its magnitude. If it is larger
+ than 256, we will assume that the bytes are swapped and go through
+ and reverse all the bytes. */
- /* Check for byte position. mt_type is a small integer field
- (normally) so we will check its magnitude. If it is larger than
- 256, we will assume that the bytes are swapped and go through
- and reverse all the bytes. */
+ if (((struct mtget *) argument)->MTIO_CHECK_FIELD < 256)
+ return 0;
- if (((struct mtget *) arg)->mt_type < 256)
- return 0;
+ for (counter = 0; counter < status; counter += 2)
+ {
+ char copy = argument[counter];
- for (cnt = 0; cnt < rc; cnt += 2)
- {
- c = arg[cnt];
- arg[cnt] = arg[cnt + 1];
- arg[cnt + 1] = c;
- }
+ argument[counter] = argument[counter + 1];
+ argument[counter + 1] = copy;
+ }
+
+ return 0;
+ }
+#endif /* MTIOCGET */
- return 0;
}
}
-
-#endif
projects / chaz / tar / commitdiff
