foreach step of path {
+ ->require_auth (hook)
+ # exits nav_loop if true
+
->morph
# check ->allow_morph
# check ->allow_nested_morph
# Assuming /cgi-bin/my_app is the program being run
- URI: /cgi-bin/my_app
+ URI: /cgi-bin/my_app
STEP: main
FORM: {}
WHY: No other information is passed. The path method is
called which eventually calls ->default_step which
defaults to "main"
- URI: /cgi-bin/my_app?foo=bar
+ URI: /cgi-bin/my_app?foo=bar
STEP: main
FORM: {foo => "bar"}
WHY: Same as previous example except that QUERY_STRING
information was passed and placed in form.
- URI: /cgi-bin/my_app?step=my_step
+ URI: /cgi-bin/my_app?step=my_step
STEP: my_step
FORM: {step => "my_step"}
WHY: The path method is called which looks in $self->form
for the key ->step_key (which defaults to "step").
- URI: /cgi-bin/my_app?step=my_step&foo=bar
+ URI: /cgi-bin/my_app?step=my_step&foo=bar
STEP: my_step
FORM: {foo => "bar", step => "my_step"}
- WHY: Same as before but has other parameters were passed.
+ WHY: Same as before but another parameter was passed.
- URI: /cgi-bin/my_app/my_step
+ URI: /cgi-bin/my_app/my_step
STEP: my_step
FORM: {step => "my_step"}
WHY: The path method is called which called path_info_map_base
$self->form->{$self->step_key} for the initial step. See
the path_info_map_base method for more information.
- URI: /cgi-bin/my_app/my_step?foo=bar
+ URI: /cgi-bin/my_app/my_step?foo=bar
STEP: my_step
FORM: {foo => "bar", step => "my_step"}
WHY: Same as before but other parameters were passed.
- URI: /cgi-bin/my_app/my_step?step=other_step
+ URI: /cgi-bin/my_app/my_step?step=other_step
STEP: other_step
FORM: {step => "other_step"}
WHY: The same procedure took place, but when the PATH_INFO
];
}
- URI: /cgi-bin/my_app/my_step/bar
+ URI: /cgi-bin/my_app/my_step/bar
STEP: my_step
FORM: {foo => "bar"}
WHY: The step was matched as in previous examples using
and the corresponding matched value was placed into
the form using the keys specified following the regex.
- URI: /cgi-bin/my_app/my_step/bar/1234
+ URI: /cgi-bin/my_app/my_step/bar/1234
STEP: my_step
FORM: {foo => "bar", id => "1234"}
WHY: Same as the previous example, except that the first
order that will match the most data. The third regex
would also match this PATH_INFO.
- URI: /cgi-bin/my_app/my_step/some/other/type/of/data
+ URI: /cgi-bin/my_app/my_step/some/other/type/of/data
STEP: my_step
FORM: {anything_else => 'some/other/type/of/data'}
WHY: Same as the previous example, except that the third
regex matched.
- URI: /cgi-bin/my_app/my_step/bar?bling=blang
+ URI: /cgi-bin/my_app/my_step/bar?bling=blang
STEP: my_step
FORM: {foo => "bar", bling => "blang"}
- WHY: Same as the first step, but additional QUERY_STRING
+ WHY: Same as the first sample, but additional QUERY_STRING
information was passed.
- URI: /cgi-bin/my_app/my_step/one%20two?bar=three%20four
+ URI: /cgi-bin/my_app/my_step/one%20two?bar=three%20four
STEP: my_step
FORM: {anything_else => "one two", bar => "three four"}
WHY: The third path_info_map regex matched. Note that the
The default hash_validation hook returns an empty hashref. This means that passed
in data is all valid and the script will automatically call the step's finalize method.
-The following shows how to some contrived validation to a step called "my_step".
+The following shows how to add some contrived validation to a step called "my_step".
sub my_step_hash_validation {
return {
};
}
-You could also return the fields from the hash_common hook and they would be available
-in both the template swapping as well as form filling.
+You could also return the fields from the hash_common hook and they
+would be available in both the template swapping as well as form
+filling.
-See the hash_base, hash_common, hash_form, hash_swap, hash_errors, swap_template, and
-template_args hooks for more information.
+See the hash_base, hash_common, hash_form, hash_swap, hash_errors,
+swap_template, and template_args hooks for more information.
-The default template engine used is CGI::Ex::Template which is Template::Toolkit compatible.
-See the CGI::Ex::Template or Template::Toolkit documentation for the types of data
-that can be passed, and for the syntax that can be used.
+The default template engine used is CGI::Ex::Template which is now a subclass
+of Template::Alloy. The default interface used is TT which is the
+Template::Toolkit interface. Template::Alloy allows for using TT documents,
+HTML::Template documents, HTML::Template::Expr documents, Text::Tmpl documents,
+or Velocity (VTL) documents. See the L<Template::Alloy> documentation
+for more information.
=head1 ADDING ADDITIONAL FORM FILL VARIABLES
The default file_print hook will look for content on your file system,
but it can also be completely overridden to return a reference to a
-scalar containing the contents of your file. Actually it can return
-anything that CGI::Ex::Template (Template::Toolkit compatible) will
+scalar containing the contents of your file (beginning with version 2.14
+string references can be cached which makes templates passed this way
+"first class" citizens). Actually it can return
+anything that Template::Alloy (Template::Toolkit compatible) will
treat as input. This templated html is displayed to the user during
any step that enters the "print" phase.
separate files. Though CGI::Ex::App will work "out of the box" as
shown it is more probable that any platform using it will customize
the various hooks to their own tastes (for example, switching print to
-use a templating system other than CGI::Ex::Template).
+use a templating system other than Template::Alloy).
=head1 SYNOPSIS STEP BY STEP
debug: admin/Recipe.pm line 14
shift->dump_history = [
"Elapsed: 0.00562",
+ "view - require_auth - require_auth - 0.00001 - 0",
"view - run_step - run_step - 0.00488 - 1",
" view - pre_step - pre_step - 0.00003 - 0",
" view - skip - view_skip - 0.00004 - 0",
adds on the default file extension found in $self->ext_print which
defaults to the property $self->{ext_print} which will default to
".html". Should return a filename relative to base_dir_abs that can be
-swapped using CGI::Ex::Template, or should be a scalar reference to
+swapped using Template::Alloy, or should be a scalar reference to
the template content that can be swapped. This will be used by the
hook print.
=item get_valid_auth (method)
-If require_auth is true at either the application level or at the
-step level, get_valid_auth will be called.
+If require_auth hook returns true on any given step then get_valid_auth will be called.
It will call auth_args to get some default args to pass to
CGI::Ex::Auth->new. It augments the args with sensible defaults that
=item navigate_authenticated (method)
-Same as the method navigate but sets require_auth(1) before
-running. See the require_auth method.
+Same as the method navigate but calls ->require_auth(1) before
+running. It will only work if the navigate_authenticated method
+has not been overwritten. See the require_auth method.
=item new (class method)
=item print (hook)
-Take the information generated by prepared_print, format it, and print it out.
-Default incarnation uses CGI::Ex::Template which is compatible with
-Template::Toolkit. Arguments are: step name (used to call the
-file_print hook), swap hashref (passed to call swap_template), and
-fill hashref (passed to fill_template).
+Take the information generated by prepared_print, format it, and print
+it out. Default incarnation uses CGI::Ex::Template (a subclass of
+Template::Alloy) which is compatible with Template::Toolkit.
+Arguments are: step name (used to call the file_print hook), swap
+hashref (passed to call swap_template), and fill hashref (passed to
+fill_template).
During the print call, the file_print hook is called which should
return a filename or a scalar reference to the template content is
Arguments are the steps used to replace. Can be called any time.
Replaces the remaining steps (if any) of the current path.
-=item require_auth (method)
+=item require_auth (hook)
-Default undef. Can return either a true value or a hashref of step names.
+Defaults to self->{require_auth} which defaults to undef.
+If called as a method and passed a single value of 1, 0, or undef it will
+set the value of $self->{require_auth} to that value. If set to a true
+value then any subsequent step will require authentication (unless its
+hook has been overwritten).
-If a hashref of stepnames is returned, authentication will be turned on
-at the step level. In this mode if any step is accessed, the get_valid_auth
-method will be called. If it fails, then the nav_loop will be stopped
-(the post_navigate method will be called - use the is_authed method to perform
-different functions). Any step of the path not in the hash will not require
-authentication. For example, to add authentication to add authentication
-to the add, edit and delete steps you could do:
+Any of the following ways can be used to require authentication on
+every step.
- sub require_auth { {add => 1, edit => 1, delete => 1} }
+=over 4
-If a non-hash true value is returned from the require_auth method then
-authentication will take place before the pre_navigation or the nav_loop methods.
-If authentication fails the navigation process is exited (the post_navigate
-method will not be called).
+=item
sub require_auth { 1 }
-Alternatively you can also could do either of the following:
+=item
__PACKAGE__->navigate_authenticated; # instead of __PACKAGE__->navigate;
- # OR
+=item
+
+ __PACKAGE__->new({require_auth => 1}->navigate;
+
+=item
sub init { shift->require_auth(1) }
- # OR
+=back
- __PACKAGE__->new({require_auth => 1}->navigate;
+Because it is called as a hook, the current step is passed as the
+first argument. If the hook returns false, no authentication will be
+required on this step. If the hook returns a true, non-hashref value,
+authentication will be required via the get_valid_auth method. If the
+method returns a hashref of stepnames to require authentication on,
+the step will require authentication via the get_valid_auth method if
+the current step is in the hashref. If authentication is required and
+succeeds, the step will proceed. If authentication is required and
+fails at the step level the current step will be aborted,
+authentication will be asked for (the post_navigate method will still
+be called).
+
+For example you could add authentication to the add, edit, and delete
+steps in any of the following ways:
-If get_valid_auth returns true, in either case, the is_authed method will
-return true and the auth_data will contain the authenticated user's data.
-If it returns false, auth_data may possibly contain a defined but false
-data object with details as to why authentication failed.
+=over 4
-See the get_valid_auth method.
+=item
+
+ sub require_auth { {add => 1, edit => 1, delete => 1} }
+
+=item
+
+ sub add_require_auth { 1 }
+ sub edit_require_auth { 1 }
+ sub delete_require_auth { 1 }
+
+=item
+
+ sub require_auth {
+ my ($self, $step) = @_;
+ return 1 if $step && $step =~ /^(add|edit|delete)$/;
+ return 0;
+ }
+
+=back
+
+If however you wanted to require authentication on all but one or two methods
+(such as requiring authentication on all but a forgot_password step) you could do
+either of the following:
+
+=over 4
+
+=item
+
+ sub require_auth {
+ my ($self, $step) = @_;
+ return 0 if $step && $step eq 'forgot_password';
+ return 1; # require auth on all other steps
+ }
+
+=item
+
+ sub require_auth { 1 } # turn it on for all steps
+
+ sub forgot_password_require_auth { 0 } # turn it off
+
+=back
+
+See the get_valid_auth method for what occurs should authentication be required.
+
+There is one key difference from the 2.14 version of App. In 2.14 and
+previous versions, the pre_navigate and post_navigate methods would
+not be called if require_auth returned a true non-hashref value. In
+version 2.15 and later, the 2.15 pre_navigate and post_navigate
+methods are always called - even if authentication fails. Also in 2.15
+and later, the method is called as a hook meaning the step is passed in.
=item run_hook (method)
=item swap_template (hook)
-Takes the template and hash of variables prepared in print, and processes them
-through the current template engine (default engine is CGI::Ex::Template).
+Takes the template and hash of variables prepared in print, and
+processes them through the current template engine (default engine is
+CGI::Ex::Template a subclass of Template::Alloy).
-Arguments are the template and the swap hashref. The template can be either a
-scalar reference to the actual content, or the filename of the content. If the
-filename is specified - it should be relative to base_dir_abs (which will be
-used to initialize INCLUDE_PATH by default).
+Arguments are the template and the swap hashref. The template can be
+either a scalar reference to the actual content, or the filename of
+the content. If the filename is specified - it should be relative to
+base_dir_abs (which will be used to initialize INCLUDE_PATH by
+default).
-The default method will create a template object by calling the template_args hook
-and passing the returned hashref to the template_obj method. The default template_obj method
-returns a CGI::Ex::Template object, but could easily be swapped to use a Template::Toolkit
-based object. If a non-Template::Toolkit compatible object is to be used, then
-the swap_template hook can be overridden to use another templating engine.
+The default method will create a template object by calling the
+template_args hook and passing the returned hashref to the
+template_obj method. The default template_obj method returns a
+CGI::Ex::Template object, but could easily be swapped to use a
+Template::Toolkit based object. If a non-Template::Toolkit compatible
+object is to be used, then the swap_template hook can be overridden to
+use another templating engine.
For example to use the HTML::Template engine you could override the swap_template
method as follows:
return $t->output;
}
+As of version 2.13 of CGI::Ex::Template you could also simply do the
+following to parse the templates using HTML::Template::Expr syntax.
+
+ sub template_args {
+ return {SYNTAX => 'hte'};
+ }
+
+For a listing of the available syntaxes, see the current L<Template::Alloy> documentation.
+
=item template_args (hook)
Returns a hashref of args that will be passed to the "new" method of CGI::Ex::Template.
will add a value for INCLUDE_PATH which is set equal to base_dir_abs, if the INCLUDE_PATH
value is not already set.
-The returned hashref can contain any arguments that CGI::Ex::Template would understand.
+The returned hashref can contain any arguments that CGI::Ex::Template (a subclass of Template::Alloy)
+would understand.
sub template_args {
return {
};
}
+See the L<Template::Alloy> documentation for a listing of all possible configuration arguments.
+
=item template_obj (method)
-Called from swap_template. It is passed the result of template_args that have
-had a default INCLUDE_PATH added. The default implementation uses CGI::Ex::Template
-but can easily be changed to use Template::Toolkit by using code similar to the following:
+Called from swap_template. It is passed the result of template_args
+that have had a default INCLUDE_PATH added. The default
+implementation uses CGI::Ex::Template (a subclass of Template::Alloy)
+but can easily be changed to use Template::Toolkit by using code
+similar to the following:
use Template;
Seemingly the most well know of application builders.
CGI::Ex::App is different in that it:
- * Uses Template::Toolkit compatible CGI::Ex::Template by default
+ * Uses Template::Toolkit compatible CGI::Ex::Template (a
+ subclass of Template::Alloy) by default.
CGI::Ex::App can easily use another toolkit by simply
overriding the ->swap_template method.
CGI::Application uses HTML::Template.
return 0;
}
- my $s = "UPDATE recipe SET title = ?, ingredients = ?, directions = ? WHERE id = ?";
+ $s = "UPDATE recipe SET title = ?, ingredients = ?, directions = ? WHERE id = ?";
$self->dbh->do($s, {}, $form->{'title'},
$form->{'ingredients'},
$form->{'directions'},
sub require_auth { {add => 1, edit => 1, delete => 1} }
+We could also enable authentication by using individual hooks as in:
+
+ sub add_require_auth { 1 }
+ sub edit_require_auth { 1 }
+ sub delete_require_auth { 1 }
+
+Or we could require authentication on everything - but let a few steps in:
+
+ sub require_auth { 1 } # turn authentication on for all
+ sub main_require_auth { 0 } # turn it off for main and view
+ sub view_require_auth { 0 }
+
That's it. The add, edit, and delete steps will now require authentication.
See the require_auth, get_valid_auth, and auth_args methods for more information.
Also see the L<CGI::Ex::Auth> perldoc.
The following corporation and individuals contributed in some part to
the original versions.
- Bizhosting.com - giving a problem that fit basic design patterns.
+ Bizhosting.com - giving a problem that fit basic design patterns.
+
+ Earl Cahill - pushing the idea of more generic frameworks.
- Earl Cahill - pushing the idea of more generic frameworks.
+ Adam Erickson - design feedback, bugfixing, feature suggestions.
- Adam Erickson - design feedback, bugfixing, feature suggestions.
+ James Lance - design feedback, bugfixing, feature suggestions.
- James Lance - design feedback, bugfixing, feature suggestions.
+ Krassimir Berov - feedback and some warnings issues with POD examples.
=head1 AUTHOR