### resize windows. ###
############################################################################
-#############################################################################
-### Options that can be modified to change the functions' behaviors. ###
-#############################################################################
-EDGE_RESISTANCE = 10
-"""The amount of resistance to provide to moving a window past a screen
- boundary. Specify a value of 0 to disable edge resistance."""
-MOVE_POPUP = 1
-"""Display a coordinates popup when moving windows."""
-MOVE_RUBBERBAND = 0
-"""NOT IMPLEMENTED (yet?)
- Display an outline while moving instead of moving the actual window,
- until the move is completed. Good for slower systems."""
-RESIZE_POPUP = 1
-"""Display a size popup when resizing windows."""
-RESIZE_RUBBERBAND = 0
-"""NOT IMPLEMENTED (yet?)
- Display an outline while resizing instead of resizing the actual
- window, until the resize is completed. Good for slower systems."""
-RESIZE_NEAREST = 1
-"""Non-zero to resize from the corner nearest where the mouse is, 0 to
- resize always from the bottom right corner."""
-#############################################################################
-
def move(data):
"""Moves the window interactively. This should only be used with
- MouseAction.Motion events. If MOVE_POPUP or MOVE_RUBBERBAND is enabled,
- then the end_move function needs to be bound as well."""
+ MouseAction.Motion events. If 'Coords Popup for Moving' or 'Rubberband
+ Mode for Moving' is enabled, then the end_move function needs to be
+ bound as well."""
_move(data)
def end_move(data):
def resize(data):
"""Resizes the window interactively. This should only be used with
- MouseMotion events. If RESIZE_POPUP or RESIZE_RUBBERBAND is enabled,
- then the end_resize function needs to be bound as well."""
+ MouseMotion events. If 'Coords Popup for Resizing' or 'Rubberband Mode
+ for Resizing' is enabled, then the end_resize function needs to be
+ bound as well."""
_resize(data)
def end_resize(data):
"""Complete the interactive resize of a window."""
_end_resize(data)
-###########################################################################
-###########################################################################
+export_functions = move, end_move, resize, end_resize
+
+#############################################################################
+
+import config
+
+config.add('motion',
+ 'edge_resistance',
+ 'Edge Resistance',
+ "The amount of resistance to provide to moving a window past a " + \
+ "screen boundary. Specify a value of 0 to disable edge resistance.",
+ 'integer',
+ 10,
+ min = 0)
+config.add('motion',
+ 'popup_in_window',
+ 'Coords Popup In Window',
+ "When this is true, the coordinates popups will be placed " + \
+ "relative to the window being moved/resized. When false, they " + \
+ "will appear relative to the entire screen.",
+ 'boolean',
+ 0)
+config.add('motion',
+ 'popup_centered',
+ 'Coords Popup Centered',
+ "When this is true, the coordinates popups will be centered " + \
+ "relative to the window or screen (see 'Coords Popup In " + \
+ "Window'). When false, they will be placed based upon the " + \
+ "'Coords Popup Position' options.",
+ 'boolean',
+ 1)
+config.add('motion',
+ 'popup_coords_x',
+ 'Coords Popup Position - X',
+ "When 'Coords Popup Centered' is false, this position will be " + \
+ "used to place the coordinates popups. The popups will be " + \
+ "placed relative to the window or the screen (see 'Coords " + \
+ "Popup In Window'). A value of 0 would place it at the left " + \
+ "edge, while a value of -1 would place it at the right edge. " + \
+ "This value behaves similarly to those passed to the -geometry " + \
+ "flag of many applications.",
+ 'integer',
+ 0)
+config.add('motion',
+ 'popup_coords_y',
+ 'Coords Popup Position - Y',
+ "When 'Coords Popup Centered' is false, this position will be " + \
+ "used to place the coordinates popups. The popups will be " + \
+ "placed relative to the window or the screen (see 'Coords Popup " +\
+ "In Window'). A value of 0 would place it at the top edge, " + \
+ "while a value of -1 would place it at the bottom edge. This " + \
+ "value behaves similarly to those passed to the -geometry flag " + \
+ "of many applications.",
+ 'integer',
+ 0)
+config.add('motion',
+ 'move_popup',
+ 'Coords Popup for Moving',
+ "Option to display a coordinates popup when moving windows.",
+ 'boolean',
+ 1)
+config.add('motion',
+ 'move_rubberband',
+ 'Rubberband Mode for Moving',
+ "NOT IMPLEMENTED (yet?)\n"+\
+ "Display an outline while moving instead of moving the actual " + \
+ "window, until the move is completed. Good for slower systems.",
+ 'boolean',
+ 0)
+config.add('motion',
+ 'resize_popup',
+ 'Coords Popup for Resizing',
+ "Option to display a coordinates popup when resizing windows.",
+ 'boolean',
+ 1)
+config.add('motion',
+ 'resize_rubberband',
+ 'Rubberband Mode for Resizing',
+ "NOT IMPLEMENTED (yet?)\n"+\
+ "Display an outline while resizing instead of resizing the " + \
+ "actual window, until the resize is completed. Good for slower " + \
+ "systems.",
+ 'boolean',
+ 0)
+config.add('motion',
+ 'resize_nearest',
+ 'Resize Nearest Corner',
+ "When true, resizing will occur from the corner nearest where " + \
+ "the mouse is. When false resizing will always occur from the " + \
+ "bottom right corner.",
+ 'boolean',
+ 1)
###########################################################################
### Internal stuff, should not be accessed outside the module. ###
import otk
_popwidget = 0
-_poplabel = 0
# motion state
_inmove = 0
_motion_mask = 0
+def _place_popup():
+ if config.get('motion', 'popup_in_window'):
+ # use the actual client's area, not the frame's
+ area = _client.frame.area()
+ size = _client.frame.size()
+ area = otk.Rect(area.x() + size.left, area.y() + size.top,
+ area.width() - size.left - size.right,
+ area.height() - size.top - size.bottom)
+ else:
+ area = otk.Rect(otk.Point(0, 0), ob.openbox.screen(_screen).size())
+ size = _popwidget.minSize()
+ if config.get('motion', 'popup_centered'):
+ x = area.position().x() + (area.size().width() - size.width()) / 2
+ y = area.position().y() + (area.size().height() - size.height()) / 2
+ else:
+ x = config.get('motion', 'popup_coords_x')
+ y = config.get('motion', 'popup_coords_y')
+ if x < 0: x += area.width() - size.width() + 1
+ if y < 0: y += area.width() - size.height() + 1
+ x += area.position().x()
+ y += area.position().y()
+ _popwidget.moveresize(otk.Rect(x, y, size.width(), size.height()))
+
def _motion_grab(data):
global _motion_mask, _inmove, _inresize;
y = _cy + _dy + _client.frame.area().y() - _client.area().y()
global _last_x, _last_y
- if EDGE_RESISTANCE:
+ resist = config.get('motion', 'edge_resistance')
+ if resist:
fs = _client.frame.size()
w = _client.area().width() + fs.left + fs.right
h = _client.area().height() + fs.top + fs.bottom
t = area.top()
b = area.bottom() - h + 1
# left screen edge
- if _last_x > x and x < l and x >= l - EDGE_RESISTANCE:
+ if _last_x > x and x < l and x >= l - resist:
x = l
# right screen edge
- if _last_x < x and x > r and x <= r + EDGE_RESISTANCE:
+ if _last_x < x and x > r and x <= r + resist:
x = r
# top screen edge
- if _last_y > y and y < t and y >= t - EDGE_RESISTANCE:
+ if _last_y > y and y < t and y >= t - resist:
y = t
# right screen edge
- if _last_y < y and y > b and y <= b + EDGE_RESISTANCE:
+ if _last_y < y and y > b and y <= b + resist:
y = b
global _inmove
_last_x = x
_last_y = y
- if MOVE_RUBBERBAND:
- # draw the outline ...
- f=0
+ if not final and config.get('motion', 'move_rubberband'):
+ # XXX draw the outline ...
+ pass
else:
_client.move(x, y, final)
- if MOVE_POPUP:
- global _popwidget, _poplabel
+ if config.get('motion', 'move_popup'):
+ global _popwidget
text = "X: " + str(x) + " Y: " + str(y)
if not _popwidget:
- _popwidget = otk.Widget(_screen, ob.openbox,
- otk.Widget.Horizontal, 0, 1)
- _poplabel = otk.Label(_popwidget)
- _poplabel.setHighlighted(1)
- _poplabel.setText(text)
- scsize = ob.openbox.screen(_screen).size()
- size = _poplabel.minSize()
- _popwidget.moveresize(otk.Rect((scsize.width() - size.width()) / 2,
- (scsize.height() - size.height()) / 2,
- size.width(), size.height()))
- _popwidget.show(1)
+ _popwidget = otk.Label(_screen, ob.openbox)
+ _popwidget.setHighlighted(1)
+ _popwidget.setText(text)
+ _place_popup()
+ _popwidget.show()
def _move(data):
if not data.client: return
_inmove = 1
def _end_move(data):
- global MOVE_RUBBERBAND
- global _inmove, _popwidget, _poplabel
+ global _inmove, _popwidget
if _inmove:
- r = MOVE_RUBBERBAND
- MOVE_RUBBERBAND = 0
_do_move(1)
- MOVE_RUBBERBAND = r
_inmove = 0
- _poplabel = 0
_popwidget = 0
ob.kungrab()
-def _do_resize():
+def _do_resize(final):
global _screen, _client, _cx, _cy, _cw, _ch, _px, _py, _dx, _dy
dx = _dx
dy = _dy
# pick a corner to anchor
- if not (RESIZE_NEAREST or _context == ob.MouseContext.Grip):
+ if not (config.get('motion', 'resize_nearest') or
+ _context == ob.MouseContext.Grip):
corner = ob.Client.TopLeft
else:
x = _px - _cx
w = _cw + dx
h = _ch + dy
- if RESIZE_RUBBERBAND:
- # draw the outline ...
- f=0
+ if not final and config.get('motion', 'resize_rubberband'):
+ # XXX draw the outline ...
+ pass
else:
_client.resize(corner, w, h)
- if RESIZE_POPUP:
- global _popwidget, _poplabel
+ if config.get('motion', 'resize_popup'):
+ global _popwidget
ls = _client.logicalSize()
text = "W: " + str(ls.width()) + " H: " + str(ls.height())
if not _popwidget:
- _popwidget = otk.Widget(_screen, ob.openbox,
- otk.Widget.Horizontal, 0, 1)
- _poplabel = otk.Label(_popwidget)
- _poplabel.setHighlighted(1)
- _poplabel.setText(text)
- scsize = ob.openbox.screen(_screen).size()
- size = _poplabel.minSize()
- _popwidget.moveresize(otk.Rect((scsize.width() - size.width()) / 2,
- (scsize.height() - size.height()) / 2,
- size.width(), size.height()))
- _popwidget.show(1)
+ _popwidget = otk.Label(_screen, ob.openbox)
+ _popwidget.setHighlighted(1)
+ _popwidget.setText(text)
+ _place_popup()
+ _popwidget.show()
def _resize(data):
if not data.client: return
_dx = data.xroot - _px
_dy = data.yroot - _py
_motion_mask = data.state
- _do_resize()
+ _do_resize(0)
global _inresize
if not _inresize:
ob.kgrab(_screen, _motion_grab)
_inresize = 1
def _end_resize(data):
- global RESIZE_RUBBERBAND, _inresize
- global _popwidget, _poplabel
+ global _inresize, _popwidget
if _inresize:
- r = RESIZE_RUBBERBAND
- RESIZE_RUBBERBAND = 0
- _do_resize()
- RESIZE_RUBBERBAND = r
+ _do_resize(1)
_inresize = 0
- _poplabel = 0
_popwidget = 0
ob.kungrab()
projects / chaz / openbox / blobdiff