/* -*- indent-tabs-mode: nil; tab-width: 4; c-basic-offset: 4; -*-
client.h for the Openbox window manager
+ Copyright (c) 2006 Mikael Magnusson
Copyright (c) 2003 Ben Jansens
This program is free software; you can redistribute it and/or modify
struct _ObGroup;
struct _ObSessionState;
-typedef struct _ObClient ObClient;
-typedef struct _ObClientIcon ObClientIcon;
+typedef struct _ObClient ObClient;
+typedef struct _ObClientIcon ObClientIcon;
+typedef struct _ObAppSettings ObAppSettings;
/* The value in client.transient_for indicating it is a transient for its
group instead of for a single window */
struct _ObFrame *frame;
/*! The number of unmap events to ignore on the window */
- int ignore_unmaps;
+ gint ignore_unmaps;
/*! The id of the group the window belongs to */
struct _ObGroup *group;
/*! The minimum aspect ratio the client window can be sized to.
A value of 0 means this is ignored.
*/
- float min_ratio;
+ gfloat min_ratio;
/*! The maximum aspect ratio the client window can be sized to.
A value of 0 means this is ignored.
*/
- float max_ratio;
+ gfloat max_ratio;
/*! The minimum size of the client window
If the min is > the max, then the window is not resizable
/*! Where to place the decorated window in relation to the undecorated
window */
- int gravity;
+ gint gravity;
/*! The state of the window, one of WithdrawnState, IconicState, or
NormalState */
- long wmstate;
+ glong wmstate;
/*! True if the client supports the delete_window protocol */
gboolean delete_window;
- /*! Was the window's position requested by the application? if not, we
+ /*! Was the window's position requested by the application or the user?
+ if by the application, we force it completely onscreen, if by the user
+ we only force it if it tries to go completely offscreen, if neither, we
should place the window ourselves when it first appears */
- gboolean positioned;
+ guint positioned;
/*! Can the window receive input focus? */
gboolean can_focus;
- /*! Urgency flag */
- gboolean urgent;
/*! Notify the window when it receives focus? */
gboolean focus_notify;
/*! The window should be underneath other windows of the same type.
above takes priority over below. */
gboolean below;
+ /*! Demands attention flag */
+ gboolean demands_attention;
/*! The layer in which the window will be stacked, windows in lower layers
are always below windows in higher layers. */
ObClientIcon *icons;
/*! The number of icons in icons */
guint nicons;
+
+ guint32 user_time;
+};
+
+struct _ObAppSettings
+{
+ gchar *class;
+ gchar *name;
+ gchar *role;
+
+ Point position;
+ gboolean center_x;
+ gboolean center_y;
+ gboolean pos_given;
+
+ guint desktop;
+ gint shade;
+ gint decor;
+ gint focus;
+ gint head;
+ gint iconic;
+ gint skip_pager;
+ gint skip_taskbar;
+ gint max_horz;
+ gint max_vert;
+ gint fullscreen;
+
+ gint layer;
};
extern GList *client_list;
#define client_configure(self, anchor, x, y, w, h, user, final) \
client_configure_full(self, anchor, x, y, w, h, user, final, FALSE)
+/*! Figure out where a window will end up and what size it will be if you
+ told it to move/resize to these coordinates.
+
+ These values are what client_configure_full will give the window.
+
+ @param anchor The corner to keep in the same position when resizing.
+ @param x The x coordiante of the new position for the client.
+ @param y The y coordiante of the new position for the client.
+ @param w The width component of the new size for the client.
+ @param h The height component of the new size for the client.
+ @param logicalw Returns the width component of the new logical width.
+ This value is only returned when the new w or h calculated
+ differ from the ones passed in.
+ @param logicalh Returns the height component of the new logical height.
+ This value is only returned when the new w or h calculated
+ differ from the ones passed in.
+ @param user Specifies whether this is a user-requested change or a
+ program requested change. For program requested changes, the
+ constraints are not checked.
+*/
+void client_try_configure(ObClient *self, ObCorner anchor,
+ gint *x, gint *y, gint *w, gint *h,
+ gint *logicalw, gint *logicalh,
+ gboolean user);
+
/*! Move and/or resize the window.
This also maintains things like the client's minsize, and size increments.
@param anchor The corner to keep in the same position when resizing.
@param h The height component of the new size for the client.
@param user Specifies whether this is a user-requested change or a
program requested change. For program requested changes, the
- constraints are not checked.
+ constraints are not checked.
@param final If user is true, then this should specify if this is a final
configuration. e.g. Final should be FALSE if doing an
- interactive move/resize, and then be TRUE for the last call
- only.
+ interactive move/resize, and then be TRUE for the last call
+ only.
@param force_reply Send a ConfigureNotify to the client regardless of if
the position changed.
*/
void client_configure_full(ObClient *self, ObCorner anchor,
- int x, int y, int w, int h,
+ gint x, gint y, gint w, gint h,
gboolean user, gboolean final,
gboolean force_reply);
struts if possible.
@return true if the client was moved to be on-screen; false if not.
*/
-gboolean client_find_onscreen(ObClient *self, int *x, int *y, int w, int h,
+gboolean client_find_onscreen(ObClient *self, gint *x, gint *y, gint w, gint h,
gboolean rude);
/*! Moves a client so that it is on screen if it is entirely out of the
/*! Fullscreen's or unfullscreen's the client window
@param fs true if the window should be made fullscreen; false if it should
be returned to normal state.
- @param savearea true to have the client's current size and position saved;
- otherwise, they are not. You should not save when mapping a
- new window that is set to fullscreen. This has no effect
- when restoring a window from fullscreen.
*/
-void client_fullscreen(ObClient *self, gboolean fs, gboolean savearea);
+void client_fullscreen(ObClient *self, gboolean fs);
/*! Iconifies or uniconifies the client window
@param iconic true if the window should be iconified; false if it should be
restored.
@param curdesk If iconic is FALSE, then this determines if the window will
be uniconified to the current viewable desktop (true) or to
- its previous desktop (false)
+ its previous desktop (false)
*/
void client_iconify(ObClient *self, gboolean iconic, gboolean curdesk);
@param max true if the window should be maximized; false if it should be
returned to normal size.
@param dir 0 to set both horz and vert, 1 to set horz, 2 to set vert.
- @param savearea true to have the client's current size and position saved;
- otherwise, they are not. You should not save when mapping a
- new window that is set to fullscreen. This has no effect
- when unmaximizing a window.
*/
-void client_maximize(ObClient *self, gboolean max, int dir,
- gboolean savearea);
+void client_maximize(ObClient *self, gboolean max, gint dir);
/*! Shades or unshades the client window
@param shade true if the window should be shaded; false if it should be
*/
void client_shade(ObClient *self, gboolean shade);
+/*! Hilite the window to make the user notice it */
+void client_hilite(ObClient *self, gboolean hilite);
+
/*! Request the client to close its window */
void client_close(ObClient *self);
desktop has been changed. Generally this should be FALSE. */
void client_set_desktop(ObClient *self, guint target, gboolean donthide);
+/*! Show the client if it should be shown, and hide it if it should be
+ hidden. This is for example, when switching desktops.
+*/
+void client_showhide(ObClient *self);
+
/*! Validate client, by making sure no Destroy or Unmap events exist in
the event queue for the window.
@return true if the client is valid; false if the client has already
gboolean client_validate(ObClient *self);
/*! Sets the wm_state to the specified value */
-void client_set_wm_state(ObClient *self, long state);
+void client_set_wm_state(ObClient *self, glong state);
/*! Adjusts the window's net_state
This should not be called as part of the window mapping process! It is for
client_apply_startup_state is used to do the same things during the mapping
process.
*/
-void client_set_state(ObClient *self, Atom action, long data1, long data2);
+void client_set_state(ObClient *self, Atom action, glong data1, glong data2);
/* Given a ObClient, find the client that focus would actually be sent to if
you wanted to give focus to the specified ObClient. Will return the same
without focusing it or modifying the focus order lists. */
gboolean client_can_focus(ObClient *self);
-/*! Attempt to focus the client window */
+/*! Attempt to focus the client window
+ NOTE: You should validate the client before calling this !! (client_validate)
+*/
gboolean client_focus(ObClient *self);
-/*! Remove focus from the client window */
-void client_unfocus(ObClient *self);
-
/*! Activates the client for use, focusing, uniconifying it, etc. To be used
when the user deliberately selects a window for use.
@param here If true, then the client is brought to the current desktop;
otherwise, the desktop is changed to where the client lives.
+ @param user If true, then a user action is what requested the activation;
+ otherwise, it means an application requested it on its own
*/
-void client_activate(ObClient *self, gboolean here);
+void client_activate(ObClient *self, gboolean here, gboolean user);
/*! Calculates the stacking layer for the client window */
void client_calc_layer(ObClient *self);
/*! Updates the WMHints and adjusts things if they change
@param initstate Whether to read the initial_state property from the
WMHints. This should only be used during the mapping
- process.
+ process.
*/
void client_update_wmhints(ObClient *self);
/*! Updates the window's title and icon title */
void client_update_strut(ObClient *self);
/*! Updates the window's icons */
void client_update_icons(ObClient *self);
+/*! Updates the window's user time */
+void client_update_user_time(ObClient *self, gboolean new_event);
/*! Set up what decor should be shown on the window and what functions should
be allowed (ObClient::decorations and ObClient::functions).
/*! Retrieves the window's type and sets ObClient->type */
void client_get_type(ObClient *self);
-const ObClientIcon *client_icon(ObClient *self, int w, int h);
+const ObClientIcon *client_icon(ObClient *self, gint w, gint h);
/*! Searches a client's direct parents for a focused window. The function does
not check for the passed client, only for *ONE LEVEL* of its parents.
*/
ObClient *client_search_modal_child(ObClient *self);
-ObClient *client_search_top_transient(ObClient *self);
+/*! Returns a list of top-level windows which this is a transient for.
+ It will only contain more than 1 element if the client is transient for its
+ group.
+*/
+GSList *client_search_all_top_parents(ObClient *self);
+
+/*! Returns a window's top level parent. This only counts direct parents,
+ not groups if it is transient for its group.
+*/
+ObClient *client_search_top_parent(ObClient *self);
+
+/*! Is one client a direct child of another (i.e. not through the group.) */
+gboolean client_is_direct_child(ObClient *parent, ObClient *child);
/*! Search for a parent of a client. This only searches up *ONE LEVEL*, and
returns the searched for parent if it is a parent, or NULL if not. */
ObClient *client_find_directional(ObClient *c, ObDirection dir);
/*! Return the closest edge in the given direction */
-int client_directional_edge_search(ObClient *c, ObDirection dir);
+gint client_directional_edge_search(ObClient *c, ObDirection dir, gboolean hang);
/*! Set a client window to be above/below other clients.
@layer < 0 indicates the client should be placed below other clients.<br>
= 0 indicates the client should be placed with other clients.<br>
> 0 indicates the client should be placed above other clients.
*/
-void client_set_layer(ObClient *self, int layer);
+void client_set_layer(ObClient *self, gint layer);
/*! Set a client window to have decorations or not */
void client_set_undecorated(ObClient *self, gboolean undecorated);
ObClient* client_under_pointer();
+gboolean client_has_group_siblings(ObClient *self);
+
#endif
projects / chaz / openbox / blobdiff