From: François Pinard Date: Wed, 16 Nov 1994 02:49:08 +0000 (+0000) Subject: *** empty log message *** X-Git-Url: https://git.dogcows.com/gitweb?a=commitdiff_plain;h=edac55a3b91bc236ed4716999cae2d45ebc84cce;p=chaz%2Ftar *** empty log message *** --- diff --git a/scripts/level-1 b/scripts/level-1 index 7f09512..c6952aa 100644 --- a/scripts/level-1 +++ b/scripts/level-1 @@ -8,139 +8,191 @@ # # You must edit the file `backup-specs' to set the parameters for your site. +# Useful for backup-specs, in case things have to be done slightly +# differently for different dump levels. +DUMP_LEVEL=1 + +# Insure `mail' is in PATH. +PATH="/usr/ucb:${PATH}" +export PATH + +# This is not the most reliable test in the world. The following might be +# more predictable: +# +# whoami="`whoami`" +# euid="`sed -ne '/^'\"${whoami}\"':/{s/^[^:]*:[^:]*://;s/:.*//p;q;}' /etc/passwd`" +# if [ "${euid}" != 0 ]; then ... +# if [ ! -w / ]; then - echo The backup must be run as root, - echo or else some files will fail to be dumped. + echo "The backup must be run as root or else some files will fail to be dumped." exit 1 -else - false fi -# Get the values of BACKUP_DIRS and BACKUP_FILES, and other variables. +# Get the values of BACKUP_DIRS, BACKUP_FILES, and other variables. . ./backup-specs # Maybe sleep until around specified or default hour. -# -if [ "$1" != "now" ]; then - if [ "$1"x != x ]; then - spec=$1 +if [ "z${1}" != "znow" ]; then + if [ "${1}x" != "x" ]; then + spec="${1}" else - spec=$BACKUP_HOUR + spec="${BACKUP_HOUR}" fi - pausetime=`date | awk '{hr=substr($4,1,2);\\ - mn=substr($4,4,2);\\ - if((hr+0)&2 exit 1 else - touch $LOGFILE + touch "${LOGFILE}" fi -mt -f $TAPE_FILE rewind -rm $VOLNO_FILE - -set $BACKUP_DIRS -while [ $# -ne 0 ] ; do - host=`echo $1 | sed 's/:.*$//'` - fs=`echo $1 | sed 's/^.*://'` - date=`date` - fsname=`echo $1 | sed 's/\//:/g'` - -# This filename must be absolute; it is opened on the machine that runs tar. - TAR_PART2="--listed=/etc/tar-backup/temp.level-1" - TAR_PART3="--label='level 1 backup of $fs on $host at $date' -C $fs ." - - echo Backing up $1 at $date | tee -a $LOGFILE - echo Last full dump on this filesystem: | tee -a $LOGFILE - - if [ $HOST != $host ] ; then - rsh $host "ls -l /etc/tar-backup/$fsname.level-0; \ - cp /etc/tar-backup/$fsname.level-0 /etc/tar-backup/temp.level-1" \ - 2>&1 | tee -a $LOGFILE - else - ls -l /etc/tar-backup/$fsname.level-0 2>&1 | tee -a $LOGFILE - cp /etc/tar-backup/$fsname.level-0 /etc/tar-backup/temp.level-1 2>&1 | tee -a $LOGFILE - fi - - # Actually back things up. - - if [ $HOST != $host ] ; then - rsh $host $TAR_PART1 -f $HOST:$TAPE_FILE $TAR_PART2 $TAR_PART3 2>&1 | tee -a $LOGFILE - else -# Using `sh -c exec' causes nested quoting and shell substitution -# to be handled here in the same way rsh handles it. - sh -c "exec $TAR_PART1 -f $TAPE_FILE $TAR_PART2 $TAR_PART3" 2>&1 | tee -a $LOGFILE - fi - if [ $? -ne 0 ] ; then - echo Backup of $1 failed. | tee -a $LOGFILE +# Most everything below here is run in a subshell for which all output is +# piped through `tee' to the logfile. Doing this, instead of having +# multiple pipelines all over the place, is cleaner and allows access to +# the exit value from various commands more easily. +( + # Caveat: Some version of `mt' require `-t', not `-f'. + mt -f "${TAPE_FILE}" rewind + rm -f "${VOLNO_FILE}" + + set - ${BACKUP_DIRS} + while [ $# -ne 0 ] ; do + date="`date`" + remotehost="`echo \"${1}\" | sed -e 's/:.*$//'`" + fs="`echo \"${1}\" | sed -e 's/^.*://'`" + fsname="`echo \"${1}\" | sed -e 's/\//:/g'`" + + # This filename must be absolute; it is opened on the machine that runs tar. + TAR_PART2="--listed=/etc/tar-backup/temp.level-1" + TAR_PART3="--label='level 1 backup of ${fs} on ${remotehost} at ${date}' -C ${fs} ." + + echo "Backing up ${1} at ${date}" + echo "Last full dump on this filesystem:" + + if [ "z${remotehost}" != "z${localhost}" ] ; then + rsh "${remotehost}" "ls -l /etc/tar-backup/${fsname}.level-0; \ + cp /etc/tar-backup/${fsname}.level-0 /etc/tar-backup/temp.level-1" + else + ls -l "/etc/tar-backup/${fsname}.level-0" + cp "/etc/tar-backup/${fsname}.level-0" /etc/tar-backup/temp.level-1 + fi + + # Actually back things up. + + if [ "z${remotehost}" != "z${localhost}" ] ; then + rsh "${remotehost}" ${TAR_PART1} -f "${localhost}:${TAPE_FILE}" ${TAR_PART2} ${TAR_PART3} + else + # Using `sh -c exec' causes nested quoting and shell substitution + # to be handled here in the same way rsh handles it. + sh -c "exec ${TAR_PART1} -f \"${TAPE_FILE}\" ${TAR_PART2} ${TAR_PART3}" + fi + + # `rsh' doesn't exit with the exit status of the remote command. What + # stupid lossage. TODO: think of a reliable workaround. + if [ $? -ne 0 ] ; then + echo "Backup of ${1} failed." + # I'm assuming that the tar will have written an empty + # file to the tape, otherwise I should do a cat here. + else + if [ "z${localhost}" != "z${remotehost}" ] ; then + rsh "${remotehost}" mv -f /etc/tar-backup/temp.level-1 "/etc/tar-backup/${fsname}.level-1" + else + mv -f /etc/tar-backup/temp.level-1 "/etc/tar-backup/${fsname}.level-1" + fi + fi + ${TAPE_STATUS} + sleep 60 + shift + done + + # Dump any individual files requested. + + if [ "x${BACKUP_FILES}" != "x" ] ; then + date="`date`" + TAR_PART2="--listed=/etc/tar-backup/temp.level-1" + TAR_PART3="--label='Incremental backup of miscellaneous files at ${date}'" + + echo "Backing up miscellaneous files at ${date}" + echo "Last full dump of these files:" + ls -l /etc/tar-backup/misc.level-0 + + rm -f /etc/tar-backup/temp.level-1 + cp /etc/tar-backup/misc.level-0 /etc/tar-backup/temp.level-1 + + # Using `sh -c exec' causes nested quoting and shell substitution + # to be handled here in the same way rsh handles it. + sh -c "exec ${TAR_PART1} -f \"${TAPE_FILE}\" ${TAR_PART2} ${TAR_PART3} ${BACKUP_FILES}" + + if [ $? -ne 0 ] ; then + echo "Backup of miscellaneous files failed." 1>&2 # I'm assuming that the tar will have written an empty # file to the tape, otherwise I should do a cat here. - else - if [ $HOST != $host ] ; then - rsh $host mv -f /etc/tar-backup/temp.level-1 /etc/tar-backup/$fsname.level-1 2>&1 | tee -a $LOGFILE - else - mv -f /etc/tar-backup/temp.level-1 /etc/tar-backup/$fsname.level-1 2>&1 | tee -a $LOGFILE - fi - fi - $TAPE_STATUS | tee -a $LOGFILE - sleep 60 - shift -done - -# Dump any individual files requested. - -if [ x != "x$BACKUP_FILES" ] ; then - date=`date` - TAR_PART2="--listed=/etc/tar-backup/temp.level-1" - TAR_PART3="--label='Incremental backup of miscellaneous files at $date'" - - echo Backing up miscellaneous files at $date | tee -a $LOGFILE - echo Last full dump of these files: | tee -a $LOGFILE - ls -l /etc/tar-backup/misc.level-0 2>&1 | tee -a $LOGFILE - - rm -f /etc/tar-backup/temp.level-1 2>&1 | tee -a $LOGFILE - cp /etc/tar-backup/misc.level-0 /etc/tar-backup/temp.level-1 2>&1 | tee -a $LOGFILE - - echo Backing up miscellaneous files at $date | tee -a $LOGFILE -# Using `sh -c exec' causes nested quoting and shell substitution -# to be handled here in the same way rsh handles it. - sh -c "exec $TAR_PART1 -f $TAPE_FILE $TAR_PART2 $TAR_PART3 \ - $BACKUP_FILES" 2>&1 | tee -a $LOGFILE - if [ $? -ne 0 ] ; then - echo Backup of miscellaneous files failed. | tee -a $LOGFILE - # I'm assuming that the tar will have written an empty - # file to the tape, otherwise I should do a cat here. - else - mv -f /etc/tar-backup/temp.level-1 /etc/tar-backup/misc.level-1 2>&1 | tee -a $LOGFILE - fi - $TAPE_STATUS | tee -a $LOGFILE -else - echo No miscellaneous files specified | tee -a $LOGFILE - false -fi + else + mv -f /etc/tar-backup/temp.level-1 /etc/tar-backup/misc.level-1 + fi + ${TAPE_STATUS} + else + echo "No miscellaneous files specified" + fi + + # Caveat: some versions of `mt' use `-t' instead of `-f'. + mt -f "${TAPE_FILE}" rewind + mt -f "${TAPE_FILE}" offl + +) 2>&1 | tee -a "${LOGFILE}" -mt -f $TAPE_FILE rewind -mt -f $TAPE_FILE offl +echo "Sending the dump log to ${ADMINISTRATOR}" +mail -s "Results of backup started ${startdate}" ${ADMINISTRATOR} < "${LOGFILE}" -echo Sending the dump log to $ADMINISTRATOR -cat $LOGFILE | sed -f logfile.sed > $LOGFILE.tmp -/usr/ucb/mail -s "Results of backup on `date`" $ADMINISTRATOR < $LOGFILE.tmp +# eof diff --git a/src/gnu.c b/src/gnu.c index 663f188..09d993d 100644 --- a/src/gnu.c +++ b/src/gnu.c @@ -534,7 +534,7 @@ int skipcrud; char *from,*to; extern union record *head; - dirp=opendir(skipcrud+head->header.name); + dirp=opendir(skipcrud+current_file_name); if(!dirp) { /* The directory doesn't exist now. It'll be created. @@ -583,7 +583,7 @@ int skipcrud; break; } if(*arc=='\0') { - p=new_name(skipcrud+head->header.name,cur); + p=new_name(skipcrud+current_file_name,cur); if(f_confirm && !confirm("delete",p)) { free(p); continue; diff --git a/src/port.h b/src/port.h index 481f36a..9357d3b 100644 --- a/src/port.h +++ b/src/port.h @@ -1,5 +1,5 @@ /* Portability declarations. Requires sys/types.h. - Copyright (C) 1988 Free Software Foundation + Copyright (C) 1988, 1992 Free Software Foundation This file is part of GNU Tar. @@ -17,11 +17,22 @@ You should have received a copy of the GNU General Public License along with GNU Tar; see the file COPYING. If not, write to the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include "pathmax.h" - +/* AIX requires this to be the first thing in the file. */ #ifdef __GNUC__ #define alloca __builtin_alloca -#endif +#else /* not __GNUC__ */ +#if HAVE_ALLOCA_H +#include +#else /* not HAVE_ALLOCA_H */ +#ifdef _AIX + #pragma alloca +#else /* not _AIX */ +char *alloca (); +#endif /* not _AIX */ +#endif /* not HAVE_ALLOCA_H */ +#endif /* not __GNUC__ */ + +#include "pathmax.h" #ifdef _POSIX_VERSION #include