From: Dana Jansens Date: Tue, 18 May 2010 22:47:54 +0000 (-0400) Subject: allows a window to unmax by resizing. X-Git-Url: https://git.dogcows.com/gitweb?a=commitdiff_plain;h=da6753973f81470088490e0ac673b7750856331f;p=chaz%2Fopenbox allows a window to unmax by resizing. makes "clever" use of the client's pre_max_area values to allow this to happen without flashing, and preserving them in case the user cancels the resize after it has become unmaximized. --- diff --git a/openbox/client.c b/openbox/client.c index ae97606d..e9a2adf5 100644 --- a/openbox/client.c +++ b/openbox/client.c @@ -1769,9 +1769,10 @@ void client_setup_decor_and_functions(ObClient *self, gboolean reconfig) } if (self->max_horz && self->max_vert) { - /* you can't resize fully maximized windows */ - self->functions &= ~OB_CLIENT_FUNC_RESIZE; - /* kill the handle on fully maxed windows */ + /* once upon a time you couldn't resize maximized windows, that is not + the case any more though ! + + but do kill the handle on fully maxed windows */ self->decorations &= ~(OB_FRAME_DECOR_HANDLE | OB_FRAME_DECOR_GRIPS); } @@ -2889,11 +2890,11 @@ void client_try_configure(ObClient *self, gint *x, gint *y, gint *w, gint *h, through this code */ { gint basew, baseh, minw, minh; - gint incw, inch; + gint incw, inch, maxw, maxh; gfloat minratio, maxratio; - incw = self->fullscreen || self->max_horz ? 1 : self->size_inc.width; - inch = self->fullscreen || self->max_vert ? 1 : self->size_inc.height; + incw = self->size_inc.width; + inch = self->size_inc.height; minratio = self->fullscreen || (self->max_horz && self->max_vert) ? 0 : self->min_ratio; maxratio = self->fullscreen || (self->max_horz && self->max_vert) ? @@ -2929,6 +2930,10 @@ void client_try_configure(ObClient *self, gint *x, gint *y, gint *w, gint *h, *w -= basew; *h -= baseh; + /* the sizes to used for maximized */ + maxw = *w; + maxh = *h; + /* keep to the increments */ *w /= incw; *h /= inch; @@ -2944,6 +2949,10 @@ void client_try_configure(ObClient *self, gint *x, gint *y, gint *w, gint *h, *w *= incw; *h *= inch; + /* if maximized/fs then don't use the size increments */ + if (self->fullscreen || self->max_horz) *w = maxw; + if (self->fullscreen || self->max_vert) *h = maxh; + *w += basew; *h += baseh; @@ -3081,7 +3090,7 @@ void client_configure(ObClient *self, gint x, gint y, gint w, gint h, When user = FALSE, then the request is coming from the application itself, and we are more strict about when to send a synthetic ConfigureNotify. We strictly follow the rules of the ICCCM sec 4.1.5 - in this case (if force_reply is true) + in this case (or send one if force_reply is true) When user = TRUE, then the request is coming from "us", like when we maximize a window or something. In this case we are more lenient. We diff --git a/openbox/moveresize.c b/openbox/moveresize.c index 966ac742..96cd6239 100644 --- a/openbox/moveresize.c +++ b/openbox/moveresize.c @@ -51,7 +51,11 @@ XSyncAlarm moveresize_alarm = None; static gboolean moving = FALSE; /* TRUE - moving, FALSE - resizing */ +/* starting geometry for the window being moved/resized, so it can be + restored */ static gint start_x, start_y, start_cx, start_cy, start_cw, start_ch; +static gboolean was_max_horz, was_max_vert; +static Rect pre_max_area; static gint cur_x, cur_y, cur_w, cur_h; static guint button; static guint32 corner; @@ -239,6 +243,9 @@ void moveresize_start(ObClient *c, gint x, gint y, guint b, guint32 cnr) button = b; key_resize_edge = -1; + /* default to not putting max back on cancel */ + was_max_horz = was_max_vert = FALSE; + /* have to change start_cx and start_cy if going to do this.. if (corner == prop_atoms.net_wm_moveresize_move_keyboard || @@ -327,6 +334,28 @@ void moveresize_end(gboolean cancel) (cancel ? start_ch : cur_h), TRUE, TRUE, FALSE); + /* restore the client's maximized state. do this after putting the window + back in its original spot to minimize visible flicker */ + if (cancel && (was_max_horz || was_max_vert)) { + const gboolean h = moveresize_client->max_horz; + const gboolean v = moveresize_client->max_vert; + + client_maximize(moveresize_client, TRUE, + was_max_horz && was_max_vert ? 0 : + (was_max_horz ? 1 : 2)); + + /* replace the premax values with the ones we had saved if + the client doesn't have any already set */ + if (was_max_horz && !h) { + moveresize_client->pre_max_area.x = pre_max_area.x; + moveresize_client->pre_max_area.width = pre_max_area.width; + } + if (was_max_vert && !v) { + moveresize_client->pre_max_area.y = pre_max_area.y; + moveresize_client->pre_max_area.height = pre_max_area.height; + } + } + /* dont edge warp after its ended */ cancel_edge_warp(); @@ -820,6 +849,33 @@ static void resize_with_keys(KeySym sym, guint state) } } + if (moveresize_client->max_horz && + (key_resize_edge == OB_DIRECTION_WEST || + key_resize_edge == OB_DIRECTION_EAST)) + { + /* unmax horz */ + was_max_horz = TRUE; + pre_max_area.x = moveresize_client->pre_max_area.x; + pre_max_area.width = moveresize_client->pre_max_area.width; + + moveresize_client->pre_max_area.x = cur_x; + moveresize_client->pre_max_area.width = cur_w; + client_maximize(moveresize_client, FALSE, 1); + } + else if (moveresize_client->max_vert && + (key_resize_edge == OB_DIRECTION_NORTH || + key_resize_edge == OB_DIRECTION_SOUTH)) + { + /* unmax vert */ + was_max_vert = TRUE; + pre_max_area.y = moveresize_client->pre_max_area.y; + pre_max_area.height = moveresize_client->pre_max_area.height; + + moveresize_client->pre_max_area.y = cur_y; + moveresize_client->pre_max_area.height = cur_h; + client_maximize(moveresize_client, FALSE, 2); + } + calc_resize(TRUE, resist, &dw, &dh, dir); if (key_resize_edge == OB_DIRECTION_WEST) cur_x -= dw; @@ -932,6 +988,46 @@ gboolean moveresize_event(XEvent *e) } else g_assert_not_reached(); + /* override the client's max state if desired */ + if (ABS(dw) >= config_resist_edge) { + if (moveresize_client->max_horz) { + /* unmax horz */ + was_max_horz = TRUE; + pre_max_area.x = moveresize_client->pre_max_area.x; + pre_max_area.width = moveresize_client->pre_max_area.width; + + moveresize_client->pre_max_area.x = cur_x; + moveresize_client->pre_max_area.width = cur_w; + client_maximize(moveresize_client, FALSE, 1); + } + } + else if (was_max_horz && !moveresize_client->max_horz) { + /* remax horz and put the premax back */ + client_maximize(moveresize_client, TRUE, 1); + moveresize_client->pre_max_area.x = pre_max_area.x; + moveresize_client->pre_max_area.width = pre_max_area.width; + } + + if (ABS(dh) >= config_resist_edge) { + if (moveresize_client->max_vert) { + /* unmax vert */ + was_max_vert = TRUE; + pre_max_area.y = moveresize_client->pre_max_area.y; + pre_max_area.height = + moveresize_client->pre_max_area.height; + + moveresize_client->pre_max_area.y = cur_y; + moveresize_client->pre_max_area.height = cur_h; + client_maximize(moveresize_client, FALSE, 2); + } + } + else if (was_max_vert && !moveresize_client->max_vert) { + /* remax vert and put the premax back */ + client_maximize(moveresize_client, TRUE, 2); + moveresize_client->pre_max_area.y = pre_max_area.y; + moveresize_client->pre_max_area.height = pre_max_area.height; + } + dw -= cur_w - start_cw; dh -= cur_h - start_ch;