X-Git-Url: https://git.dogcows.com/gitweb?a=blobdiff_plain;ds=sidebyside;f=README;h=b3895b0d525ca4db7604e90285b3179fbde378cf;hb=b500277de7eeac4893fe6517c38dc417b4a4d976;hp=d35f9cee3298ef4cc2a4bc836ff81858eb5df77d;hpb=bf9a7d3d974cb28346b8c893eed077a2a2b194b7;p=chaz%2Ftar
diff --git a/README b/README
index d35f9ce..b3895b0 100644
--- a/README
+++ b/README
@@ -1,82 +1,135 @@
+README for GNU tar
+See the end of file for copying conditions.
+
+* Introduction
+
Please glance through *all* sections of this
-`README' file before starting configuration. Also make sure you read files
-`ABOUT-NLS' and `INSTALL' if you are not familiar with them already.
+'README' file before starting configuration. Also make sure you read files
+'ABOUT-NLS' and 'INSTALL' if you are not familiar with them already.
-If you got the `tar' distribution in `shar' format, time stamps ought to be
-properly restored; do not ignore such complaints at `unshar' time.
+If you got the 'tar' distribution in 'shar' format, time stamps ought to be
+properly restored; do not ignore such complaints at 'unshar' time.
-GNU `tar' saves many files together into a single tape or disk
+GNU 'tar' saves many files together into a single tape or disk
archive, and can restore individual files from the archive. It includes
multivolume support, the ability to archive sparse files, automatic archive
compression/decompression, remote archives and special features that allow
-`tar' to be used for incremental and full backups. This distribution
-also includes `rmt', the remote tape server. The `mt' tape drive control
-program is in the GNU `cpio' distribution.
+'tar' to be used for incremental and full backups. This distribution
+also includes 'rmt', the remote tape server. The 'mt' tape drive control
+program is in the GNU 'cpio' distribution.
+
+GNU 'tar' is derived from John Gilmore's public domain 'tar'.
+
+See file 'ABOUT-NLS' for how to customize this program to your language.
+See file 'COPYING' for copying conditions.
+See file 'INSTALL' for compilation and installation instructions.
+See file 'PORTS' for various ports of GNU tar to non-Unix systems.
+See file 'NEWS' for a list of major changes in the current release.
+See file 'THANKS' for a list of contributors.
+
+Besides those configure options documented in files 'INSTALL' and
+'ABOUT-NLS', an extra option may be accepted after './configure':
+
+* Install
+
+** Selecting the default archive format.
+
+The default archive format is GNU, this can be overridden by
+presetting DEFAULT_ARCHIVE_FORMAT while configuring. The allowed
+values are GNU, V7, OLDGNU, USTAR and POSIX.
+
+** Selecting the default archive device
+
+The default archive device is now 'stdin' on read and 'stdout' on write.
+The installer can still override this by presetting 'DEFAULT_ARCHIVE'
+in the environment before configuring (the behavior of '-[0-7]' or
+'-[0-7]lmh' options in 'tar' are then derived automatically). Similarly,
+'DEFAULT_BLOCKING' can be preset to something else than 20.
+
+** Selecting full pathname of the "rmt" binary.
+
+Previous versions of tar always looked for "rmt" binary in the
+directory "/etc/rmt". However, the "rmt" program included
+in the distribution was installed under "$prefix/libexec/rmt".
+To fix this discrepancy, tar now looks for "$prefix/libexec/rmt".
+If you do not want this behavior, specify full path name of
+"rmt" binary using DEFAULT_RMT_DIR variable, e.g.:
-GNU `tar' is derived from John Gilmore's public domain `tar'.
+./configure DEFAULT_RMT_DIR=/etc
-See file `ABOUT-NLS' for how to customize this program to your language.
-See file `BACKLOG' for a summary of pending mail and articles.
-See file `COPYING' for copying conditions.
-See file `INSTALL' for compilation and installation instructions.
-See file `PORTS' for various ports of GNU tar to non-Unix systems.
-See file `NEWS' for a list of major changes in the current release.
-See file `THANKS' for a list of contributors.
+If you already have a copy of "rmt" installed and wish to use it
+instead of the version supplied with the distribution, use --with-rmt
+option:
-Besides those configure options documented in files `INSTALL' and
-`ABOUT-NLS', an extra option may be accepted after `./configure':
+./configure --with-rmt=/etc/rmt
-* `--disable-largefile' omits support for large files, even if the
+This will also disable building the included version of rmt.
+
+** Installing backup scripts.
+
+This version of tar is shipped with the shell scripts for producing
+incremental backups (dumps) and restoring filesystems from them.
+The name of the backup script is "backup". The name of the
+restore script is "restore". They are installed in "$prefix/sbin"
+directory.
+
+Use option --enable-backup-scripts to compile and install these
+scripts.
+
+** '--disable-largefile' omits support for large files, even if the
operating system supports large files. Typically, large files are
-those larger on 2 GB on a 32-bit host.
-
-The default archive device is now `stdin' on read and `stdout' on write.
-The installer can still override this by presetting `DEFAULT_ARCHIVE'
-in the environment before configuring (the behavior of `-[0-7]' or
-`-[0-7]lmh' options in `tar' are then derived automatically). Similarly,
-`DEFAULT_BLOCKING' can be preset to something else than 20.
-
-For comprehensive modifications to GNU tar, you might need tools beyond
-those used in simple installations. Fully install GNU m4 1.4 first,
-and only then, Autoconf 2.13 or later. Install Perl, then Automake
-1.4 or later. You might need Bison 1.28 or later, and GNU tar itself.
-All are available on GNU archive sites, like in
-ftp://ftp.gnu.org/pub/gnu/.
-
-Send bug reports to `bug-tar@gnu.org'. (Beware, old-timers: it is
-`@gnu', not `@prep'; and not `bug-gnu-utils' anymore.) A bug report is
-an adequate description of the problem: your input, what you expected,
-what you got, and why this is wrong. Diffs are welcome, but they only
-describe a solution, from which the problem might be uneasy to infer.
-If needed, submit actual data files with your report. Small data files
-are preferred. Big files may sometimes be necessary, but do not send them
-to the report address; rather take special arrangement with the maintainer.
+those larger than 2 GB on a 32-bit host.
-Your feedback will help us to make a better and more portable package.
-Consider documentation errors as bugs, and report them as such. If you
-develop anything pertaining to `tar' or have suggestions, let us know
-and share your findings by writing at `tar-forum@iro.umontreal.ca'.
+* Installation hints
-.--------------------.
-| Installation hints |
-`--------------------'
+Here are a few hints which might help installing 'tar' on some systems.
-Here are a few hints which might help installing `tar' on some systems.
+** gzip and bzip2.
-* Static linking.
+GNU tar uses the gzip and bzip2 programs to read and write compressed
+archives. If you don't have these programs already, you need to
+install them. Their sources can be found at:
-Some platform will, by default, prepare a smaller `tar' executable
-which depends on shared libraries. Since GNU `tar' may be used for
+ftp://ftp.gnu.org/gnu/gzip/
+http://sourceware.cygnus.com/bzip2/
+
+If you see the following symptoms:
+
+ $ tar -xzf file.tar.gz
+ gzip: stdin: decompression OK, trailing garbage ignored
+ tar: Child returned status 2
+
+then you have encountered a gzip incompatibility that should be fixed
+in gzip test version 1.3, which as of this writing is available at
+. You can work around the
+incompatibility by using a shell command like
+ 'gzip -d is not found (Slackware).
+Set LIBS to '-lbsd' before configuration (see 'INSTALL') if the linker
+complains about 'bsd_ioctl' (Slackware). Also set CPPFLAGS to
+'-I/usr/include/bsd' if is not found (Slackware).
-* OPENStep 4.2 swap files
+** OPENStep 4.2 swap files
Tar cannot read the file /private/vm/swapfile.front (even as root).
This file is not a real file, but some kind of uncompressed view of
the real compressed swap file; there is no reason to back it up, so
the simplest workaround is to avoid tarring this file.
-.------------------.
-| Special topics. |
-`------------------'
+* Special topics
-Here are a few special matters about GNU `tar', not related to build
+Here are a few special matters about GNU 'tar', not related to build
matters. See previous section for such.
-* File attributes.
+** File attributes.
-About *security*, it is probable that future releases of `tar' will have
+About *security*, it is probable that future releases of 'tar' will have
some behavior changed. There are many pending suggestions to choose from.
-Today, extracting an archive not being `root', `tar' will restore suid/sgid
-bits on files but owned by the extracting user. `root' automatically gets
-a lot of special privileges, `-p' might later become required to get them.
+Today, extracting an archive not being 'root', 'tar' will restore suid/sgid
+bits on files but owned by the extracting user. 'root' automatically gets
+a lot of special privileges, '-p' might later become required to get them.
-GNU `tar' does not properly restore symlink attributes. Various systems
+GNU 'tar' does not properly restore symlink attributes. Various systems
implement flavors of symbolic links showing different behavior and
properties. We did not successfully sorted all these out yet. Currently,
-the `lchown' call will be used if available, but that's all.
+the 'lchown' call will be used if available, but that's all.
+
+** POSIX compliance.
+
+GNU 'tar' is able to create archive in the following formats:
+
+ *** The format of UNIX version 7
+ *** POSIX.1-1988 format, also known as "ustar format"
+ *** POSIX.1-2001 format, also known as "pax format"
+ *** Old GNU format (described below)
-* POSIX compliance.
+In addition to those, GNU 'tar' is also able to read archives
+produced by 'star' archiver.
-GNU `tar' implements an early draft of the POSIX 1003.1 `ustar' standard
-which is different from the final standard. This will be progressively
-corrected over the incoming few years. Don't be mislead by the mere
-existence of the --posix option. Later releases will become able to
-read truly POSIX archives, and also to produce them under option. (Also,
-if you look at the internals, don't take the GNU extensions you see for
-granted, as they are planned to change.) GNU tar 2.0 will produce POSIX
-archives by default, but there is a long way before we get there.
+A so called 'Old GNU' format is based on an early draft of the
+POSIX 1003.1 'ustar' standard which is different from the final
+standard. It defines its extensions (such as incremental backups
+and handling of the long file names) in a way incompatible with
+any existing tar archive format, therefore the use of old GNU
+format is strongly discouraged.
+
+Please read the file NEWS for more information about POSIX compliance
+and new 'tar' features.
* What's next?
-The emphasis from 1.11.2 to 1.14 has been on solving the main portability,
-execution or usability bugs. This was accompanied all over with an
-internal cleanup in the sources, and the reassembly of a `tar' manual.
-
-The `BACKLOG' file shows approximate priorities of the many pending
-problems and suggestions. Besides pending problems and all other matters
-listed above, the cleanup is planned to continue and extend to the general
-organization of the code, preparing a long time in advance for a possible
-merge of the `cpio' and `tar' distributions, into some common `paxutils'.
-We also want to address some long-awaited performance issues (for example:
-double buffering) or enhancements (for example: per-file compression).
+GNU tar will be merged into GNU paxutils: a project containing
+several utilities related to creating and handling archives in
+various formats. The project will include tar, cpio and pax
+utilities.
+
+* Bug reporting.
+
+Send bug reports to . A bug report should contain
+an adequate description of the problem, your input, what you expected,
+what you got, and why this is wrong. Diffs are welcome, but they only
+describe a solution, from which the problem might be uneasy to infer.
+If needed, submit actual data files with your report. Small data files
+are preferred. Big files may sometimes be necessary, but do not send them
+to the report address; rather take special arrangement with the maintainer.
+
+Your feedback will help us to make a better and more portable package.
+Consider documentation errors as bugs, and report them as such. If you
+develop anything pertaining to 'tar' or have suggestions, let us know
+and share your findings by writing to .
+
+
+* Copying
+
+Copyright 1990-1992, 1994, 1997-2001, 2003-2004, 2007, 2012-2014 Free
+Software Foundation, Inc.
+
+This file is part of GNU tar.
+
+GNU tar is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 3 of the License, or
+(at your option) any later version.
+
+GNU tar is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+
+NOTE ON COPYRIGHT YEARS
+
+In copyright notices where the copyright holder is the Free Software
+Foundation, then where a range of years appears, this is an inclusive
+range that applies to every year in the range. For example: 2005-2008
+represents the years 2005, 2006, 2007, and 2008.
+
+Local Variables:
+mode: outline
+paragraph-separate: "[ ]*$"
+version-control: never
+End: