X-Git-Url: https://git.dogcows.com/gitweb?a=blobdiff_plain;ds=sidebyside;f=README;h=b3895b0d525ca4db7604e90285b3179fbde378cf;hb=a5db4ba5cb8a4e2685ff5eb109eb43d19f7912f8;hp=ae5153a50da6e142bf1e0e5148e970cd36f4fba0;hpb=c9477c3e7b73a709cf253c2b2db79c6fbeec6379;p=chaz%2Ftar
diff --git a/README b/README
index ae5153a..b3895b0 100644
--- a/README
+++ b/README
@@ -1,36 +1,254 @@
-Hey! Emacs! Yo! This is -*- Text -*- !!!
-
-This GNU tar 1.11. Please send bug reports, etc., to
-bug-gnu-utils@prep.ai.mit.edu. This is a beta-test release. Please
-try it out. After bug reports are processed for this release, version
-1.12 will be released.
-
-GNU tar is based heavily on John Gilmore's public domain tar, but with
-added features. The manual is currently being written. An old
-manual, surely riddled with errors, is in tar.texinfo. Please don't
-send in bug reports about that manual. In particular, the mechanism
-for doing incremental dumps has been significantly changed.
-
-This distribution also includes rmt, the remote tape server (which
-normally must reside in /etc). The mt tape drive control program is
-in the GNU cpio distribution.
-
-See the file INSTALL for compilation and installation instructions for Unix.
-See the file NEWS for information on all that is new in this version
-of tar.
-
-makefile.pc is a makefile for Turbo C 2.0 on MS-DOS.
-
-Various people have been having problems using floppies on a NeXT.
-I've gotten conflicting reports about what should be done to solve the
-problems, and we have no way to test it ourselves.
-
-If you want to do incremental dumps, use the distributed backup
-scripts. They are what we use at the FSF to do all our backups. Most
-importantly, do not use --incremental (-G) or --after-date (-N) or
---newer-mtime to do incremental dumps. The only option that works
-correctly for this purpose is --listed-incremental. (When extracting
-incremental dumps, use --incremental (-G).)
-
-There is no tar manual in this release. The old manual has too many
-problems to make it usable. A new manual will appear in version 1.12.
+README for GNU tar
+See the end of file for copying conditions.
+
+* Introduction
+
+Please glance through *all* sections of this
+'README' file before starting configuration. Also make sure you read files
+'ABOUT-NLS' and 'INSTALL' if you are not familiar with them already.
+
+If you got the 'tar' distribution in 'shar' format, time stamps ought to be
+properly restored; do not ignore such complaints at 'unshar' time.
+
+GNU 'tar' saves many files together into a single tape or disk
+archive, and can restore individual files from the archive. It includes
+multivolume support, the ability to archive sparse files, automatic archive
+compression/decompression, remote archives and special features that allow
+'tar' to be used for incremental and full backups. This distribution
+also includes 'rmt', the remote tape server. The 'mt' tape drive control
+program is in the GNU 'cpio' distribution.
+
+GNU 'tar' is derived from John Gilmore's public domain 'tar'.
+
+See file 'ABOUT-NLS' for how to customize this program to your language.
+See file 'COPYING' for copying conditions.
+See file 'INSTALL' for compilation and installation instructions.
+See file 'PORTS' for various ports of GNU tar to non-Unix systems.
+See file 'NEWS' for a list of major changes in the current release.
+See file 'THANKS' for a list of contributors.
+
+Besides those configure options documented in files 'INSTALL' and
+'ABOUT-NLS', an extra option may be accepted after './configure':
+
+* Install
+
+** Selecting the default archive format.
+
+The default archive format is GNU, this can be overridden by
+presetting DEFAULT_ARCHIVE_FORMAT while configuring. The allowed
+values are GNU, V7, OLDGNU, USTAR and POSIX.
+
+** Selecting the default archive device
+
+The default archive device is now 'stdin' on read and 'stdout' on write.
+The installer can still override this by presetting 'DEFAULT_ARCHIVE'
+in the environment before configuring (the behavior of '-[0-7]' or
+'-[0-7]lmh' options in 'tar' are then derived automatically). Similarly,
+'DEFAULT_BLOCKING' can be preset to something else than 20.
+
+** Selecting full pathname of the "rmt" binary.
+
+Previous versions of tar always looked for "rmt" binary in the
+directory "/etc/rmt". However, the "rmt" program included
+in the distribution was installed under "$prefix/libexec/rmt".
+To fix this discrepancy, tar now looks for "$prefix/libexec/rmt".
+If you do not want this behavior, specify full path name of
+"rmt" binary using DEFAULT_RMT_DIR variable, e.g.:
+
+./configure DEFAULT_RMT_DIR=/etc
+
+If you already have a copy of "rmt" installed and wish to use it
+instead of the version supplied with the distribution, use --with-rmt
+option:
+
+./configure --with-rmt=/etc/rmt
+
+This will also disable building the included version of rmt.
+
+** Installing backup scripts.
+
+This version of tar is shipped with the shell scripts for producing
+incremental backups (dumps) and restoring filesystems from them.
+The name of the backup script is "backup". The name of the
+restore script is "restore". They are installed in "$prefix/sbin"
+directory.
+
+Use option --enable-backup-scripts to compile and install these
+scripts.
+
+** '--disable-largefile' omits support for large files, even if the
+operating system supports large files. Typically, large files are
+those larger than 2 GB on a 32-bit host.
+
+* Installation hints
+
+Here are a few hints which might help installing 'tar' on some systems.
+
+** gzip and bzip2.
+
+GNU tar uses the gzip and bzip2 programs to read and write compressed
+archives. If you don't have these programs already, you need to
+install them. Their sources can be found at:
+
+ftp://ftp.gnu.org/gnu/gzip/
+http://sourceware.cygnus.com/bzip2/
+
+If you see the following symptoms:
+
+ $ tar -xzf file.tar.gz
+ gzip: stdin: decompression OK, trailing garbage ignored
+ tar: Child returned status 2
+
+then you have encountered a gzip incompatibility that should be fixed
+in gzip test version 1.3, which as of this writing is available at
+. You can work around the
+incompatibility by using a shell command like
+ 'gzip -d is not found (Slackware).
+
+** OPENStep 4.2 swap files
+
+Tar cannot read the file /private/vm/swapfile.front (even as root).
+This file is not a real file, but some kind of uncompressed view of
+the real compressed swap file; there is no reason to back it up, so
+the simplest workaround is to avoid tarring this file.
+
+* Special topics
+
+Here are a few special matters about GNU 'tar', not related to build
+matters. See previous section for such.
+
+** File attributes.
+
+About *security*, it is probable that future releases of 'tar' will have
+some behavior changed. There are many pending suggestions to choose from.
+Today, extracting an archive not being 'root', 'tar' will restore suid/sgid
+bits on files but owned by the extracting user. 'root' automatically gets
+a lot of special privileges, '-p' might later become required to get them.
+
+GNU 'tar' does not properly restore symlink attributes. Various systems
+implement flavors of symbolic links showing different behavior and
+properties. We did not successfully sorted all these out yet. Currently,
+the 'lchown' call will be used if available, but that's all.
+
+** POSIX compliance.
+
+GNU 'tar' is able to create archive in the following formats:
+
+ *** The format of UNIX version 7
+ *** POSIX.1-1988 format, also known as "ustar format"
+ *** POSIX.1-2001 format, also known as "pax format"
+ *** Old GNU format (described below)
+
+In addition to those, GNU 'tar' is also able to read archives
+produced by 'star' archiver.
+
+A so called 'Old GNU' format is based on an early draft of the
+POSIX 1003.1 'ustar' standard which is different from the final
+standard. It defines its extensions (such as incremental backups
+and handling of the long file names) in a way incompatible with
+any existing tar archive format, therefore the use of old GNU
+format is strongly discouraged.
+
+Please read the file NEWS for more information about POSIX compliance
+and new 'tar' features.
+
+* What's next?
+
+GNU tar will be merged into GNU paxutils: a project containing
+several utilities related to creating and handling archives in
+various formats. The project will include tar, cpio and pax
+utilities.
+
+* Bug reporting.
+
+Send bug reports to . A bug report should contain
+an adequate description of the problem, your input, what you expected,
+what you got, and why this is wrong. Diffs are welcome, but they only
+describe a solution, from which the problem might be uneasy to infer.
+If needed, submit actual data files with your report. Small data files
+are preferred. Big files may sometimes be necessary, but do not send them
+to the report address; rather take special arrangement with the maintainer.
+
+Your feedback will help us to make a better and more portable package.
+Consider documentation errors as bugs, and report them as such. If you
+develop anything pertaining to 'tar' or have suggestions, let us know
+and share your findings by writing to .
+
+
+* Copying
+
+Copyright 1990-1992, 1994, 1997-2001, 2003-2004, 2007, 2012-2014 Free
+Software Foundation, Inc.
+
+This file is part of GNU tar.
+
+GNU tar is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 3 of the License, or
+(at your option) any later version.
+
+GNU tar is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+
+NOTE ON COPYRIGHT YEARS
+
+In copyright notices where the copyright holder is the Free Software
+Foundation, then where a range of years appears, this is an inclusive
+range that applies to every year in the range. For example: 2005-2008
+represents the years 2005, 2006, 2007, and 2008.
+
+Local Variables:
+mode: outline
+paragraph-separate: "[ ]*$"
+version-control: never
+End: