from archives.
Copyright @copyright{} 1992, 1994, 1995, 1996, 1997, 1999, 2000, 2001,
-2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
@quotation
Permission is granted to copy, distribute and/or modify this document
The second chapter is a tutorial (@pxref{Tutorial}) which provides a
gentle introduction for people who are new to using @command{tar}. It is
-meant to be self contained, not requiring any reading from subsequent
+meant to be self-contained, not requiring any reading from subsequent
chapters to make sense. It moves from topic to topic in a logical,
progressive order, building on information already explained.
When reporting a bug, please be sure to include as much detail as
possible, in order to reproduce it. @FIXME{Be more specific, I'd
like to make this node as detailed as 'Bug reporting' node in Emacs
-manual}.
+manual.}
@node Tutorial
@chapter Tutorial Introduction to @command{tar}
of the operations and options have no short or ``old'' forms; however,
the operations and options which we will cover in this tutorial have
corresponding abbreviations. We will indicate those abbreviations
-appropriately to get you used to seeing them. (Note that the ``old
+appropriately to get you used to seeing them. Note, that the ``old
style'' option forms exist in @GNUTAR{} for compatibility with Unix
@command{tar}. In this book we present a full discussion of this way
of writing options and operations (@pxref{Old Options}), and we discuss
If you don't specify this argument, then @command{tar} will examine
the environment variable @env{TAPE}. If it is set, its value will be
used as the archive name. Otherwise, @command{tar} will use the
-default archive, determined at the compile time. Usually it is
+default archive, determined at compile time. Usually it is
standard output or some physical tape drive attached to your machine
(you can verify what the default is by running @kbd{tar
--show-defaults}, @pxref{defaults}). If there is no tape drive
is now your @dfn{working directory}. (@emph{Please note}: Although
the full file name of this directory is
@file{/@var{homedir}/practice}, in our examples we will refer to
-this directory as @file{practice}; the @var{homedir} is presumed.
+this directory as @file{practice}; the @var{homedir} is presumed.)
In general, you should check that the files to be archived exist where
you think they do (in the working directory) by running @command{ls}.
@end smallexample
This example is just like the example we showed which did not use
-@option{--verbose}, except that @command{tar} generated the remaining lines
+@option{--verbose}, except that @command{tar} generated the remaining
@iftex
-(note the different font styles).
+lines (note the different font styles).
@end iftex
@ifinfo
-.
+lines.
@end ifinfo
In the rest of the examples in this chapter, we will frequently use
they will enter an infinite loop when this happens, so you should not
depend on this behavior unless you are certain you are running
@GNUTAR{}. In general, it is wise to always place the archive outside
-of the directory being dumped.
+of the directory being dumped.)
@node list
@section How to List Archives
@node extract
@section How to Extract Members from an Archive
-@UNREVISED
@cindex Extraction
@cindex Retrieving files from an archive
@cindex Resurrecting files from an archive
@smallexample
tar: folk: Not found in archive
tar: jazz: Not found in archive
-$
@end smallexample
@noindent
@smallexample
$ @kbd{tar -tvf music.tar}
+practice/blues
practice/folk
practice/jazz
-practice/rock
@end smallexample
@FIXME{make sure the above works when going through the examples in
@node tar invocation
@chapter Invoking @GNUTAR{}
-@UNREVISED
This chapter is about how one invokes the @GNUTAR{}
command, from the command synopsis (@pxref{Synopsis}). There are
different times during the history of @command{tar}. These styles will be
presented below, from the most recent to the oldest.
-Some options must take an argument. (For example, @option{--file}
-(@option{-f})) takes the name of an archive file as an argument. If
+Some options must take an argument@footnote{For example, @option{--file}
+(@option{-f}) takes the name of an archive file as an argument. If
you do not supply an archive file name, @command{tar} will use a
default, but this can be confusing; thus, we recommend that you always
-supply a specific archive file name.) Where you @emph{place} the
+supply a specific archive file name.}. Where you @emph{place} the
arguments generally depends on which style of options you choose. We
will detail specific information relevant to each option style in the
sections on the different option styles, below. The differences are
@node Long Options
@subsection Long Option Style
+@cindex long options
+@cindex options, long style
+@cindex options, GNU style
+@cindex options, mnemonic names
Each option has at least one @dfn{long} (or @dfn{mnemonic}) name starting with two
dashes in a row, e.g., @option{--list}. The long names are more clear than
their corresponding short or old names. It sometimes happens that a
gives a fairly good set of hints about what the command does, even
for those not fully acquainted with @command{tar}.
+@cindex arguments to long options
+@cindex long options with mandatory arguments
Long options which require arguments take those arguments
immediately following the option name. There are two ways of
specifying a mandatory argument. It can be separated from the
@file{archive.tar} as argument by using any of the following notations:
@option{--file=archive.tar} or @option{--file archive.tar}.
+@cindex optional arguments to long options
+@cindex long options with optional arguments
In contrast, optional arguments must always be introduced using
an equal sign. For example, the @option{--backup} option takes
an optional argument specifying backup type. It must be used
@node Short Options
@subsection Short Option Style
+@cindex short options
+@cindex options, short style
+@cindex options, traditional
Most options also have a @dfn{short option} name. Short options start with
a single dash, and are followed by a single character, e.g., @option{-t}
(which is equivalent to @option{--list}). The forms are absolutely
The short option names are faster to type than long option names.
+@cindex arguments to short options
+@cindex short options with mandatory arguments
Short options which require arguments take their arguments immediately
following the option, usually separated by white space. It is also
possible to stick the argument right after the short option name, using
@w{@option{-f @var{archive-name}}} denote the option which indicates a
specific archive, here named @file{archive.tar}.
+@cindex optional arguments to short options
+@cindex short options with optional arguments
Short options which take optional arguments take their arguments
immediately following the option letter, @emph{without any intervening
white space characters}.
@node Old Options
@subsection Old Option Style
-@UNREVISED
+@cindex options, old style
+@cindex old option style
Like short options, @dfn{old options} are single letters. However, old options
must be written together as a single clumped set, without spaces separating
long option @option{--list}. So for example, the command @w{@samp{tar
cv}} specifies the option @option{-v} in addition to the operation @option{-c}.
+@cindex arguments to old options
+@cindex old options with mandatory arguments
When options that need arguments are given together with the command,
all the associated arguments follow, in the same order as the options.
Thus, the example given previously could also be written in the old
@node Mixing
@subsection Mixing Option Styles
+@cindex options, mixing different styles
All three styles may be intermixed in a single @command{tar} command,
so long as the rules for each style are fully
respected@footnote{Before @GNUTAR{} version 1.11.6,
@section All @command{tar} Options
The coming manual sections contain an alphabetical listing of all
-@command{tar} operations and options, with brief descriptions and cross
-references to more in-depth explanations in the body of the manual.
+@command{tar} operations and options, with brief descriptions and
+cross-references to more in-depth explanations in the body of the manual.
They also contain an alphabetically arranged table of the short option
forms with their corresponding long option. You can use this table as
a reference for deciphering @command{tar} commands in scripts.
@opsummary{delete}
@item --delete
-Deletes members from the archive. Don't try this on a archive on a
+Deletes members from the archive. Don't try this on an archive on a
tape! @xref{delete}.
@opsummary{diff}
time, as the times of their accesses will be lost. On most platforms
restoring the access time also requires @command{tar} to restore the
data modification time too, so this option may also cause problems if
-other programs are writing the file at the same time. (Tar attempts
+other programs are writing the file at the same time (@command{tar} attempts
to detect this situation, but cannot do so reliably due to race
-conditions.) Worse, on most platforms restoring the access time also
+conditions). Worse, on most platforms restoring the access time also
updates the status change time, which means that this option is
incompatible with incremental backups.
@option{--atime-preserve=replace}, but this may change in the future
as support for @option{--atime-preserve=system} improves.
-If your operating system does not support
+If your operating or file system does not support
@option{--atime-preserve=@-system}, you might be able to preserve access
-times reliably by by using the @command{mount} command. For example,
+times reliably by using the @command{mount} command. For example,
you can mount the file system read-only, or access the file system via
a read-only loopback mount, or use the @samp{noatime} mount option
available on some systems. However, mounting typically requires
want a visual indication that @command{tar} is still running, but
don't want to see @option{--verbose} output. You can also instruct
@command{tar} to execute a list of actions on each checkpoint, see
-@option{--checklist-action} below. For a detailed description, see
+@option{--checkpoint-action} below. For a detailed description, see
@ref{checkpoints}.
@opsummary{checkpoint-action}
When performing operations, @command{tar} will skip files that match
@var{pattern}. @xref{exclude}.
+@opsummary{exclude-backups}
+@item --exclude-backups
+Exclude backup and lock files. @xref{exclude,, exclude-backups}.
+
@opsummary{exclude-from}
@item --exclude-from=@var{file}
@itemx -X @var{file}
Exclude from dump any directory containing a valid cache directory
tag file, but still dump the directory node and the tag file itself.
-@xref{exclude}.
+@xref{exclude,, exclude-caches}.
@opsummary{exclude-caches-under}
@item --exclude-caches-under
@item --exclude-tag=@var{file}
Exclude from dump any directory containing file named @var{file}, but
-dump the directory node and @var{file} itself. @xref{exclude}.
+dump the directory node and @var{file} itself. @xref{exclude,, exclude-tag}.
@opsummary{exclude-tag-under}
@item --exclude-tag-under=@var{file}
Exclude from dump the contents of any directory containing file
-named @var{file}, but dump the directory node itself. @xref{exclude}.
+named @var{file}, but dump the directory node itself. @xref{exclude,,
+exclude-tag-under}.
@opsummary{exclude-tag-all}
@item --exclude-tag-all=@var{file}
Exclude from dump any directory containing file named @var{file}.
-@xref{exclude}.
+@xref{exclude,,exclude-tag-all}.
@opsummary{exclude-vcs}
@item --exclude-vcs
Exclude from dump directories and files, that are internal for some
widely used version control systems.
-@xref{exclude}.
+@xref{exclude,,exclude-vcs}.
@opsummary{file}
@item --file=@var{archive}
@command{tar} will only operate on archives that have a label matching
the pattern specified in @var{name}. @xref{Tape Files}.
+@opsummary{level}
+@item --level=@var{n}
+Force incremental backup of level @var{n}. As of @GNUTAR version
+@value{VERSION}, the option @option{--level=0} truncates the snapshot
+file, thereby forcing the level 0 dump. Other values of @var{n} are
+effectively ignored. @xref{--level=0}, for details and examples.
+
+The use of this option is valid only in conjunction with the
+@option{--listed-incremental} option. @xref{Incremental Dumps},
+for a detailed description.
+
@opsummary{listed-incremental}
@item --listed-incremental=@var{snapshot-file}
@itemx -g @var{snapshot-file}
With other operations, informs @command{tar} that the archive is in
incremental format. @xref{Incremental Dumps}.
+@opsummary{lzip}
+@item --lzip
+
+This option tells @command{tar} to read or write archives through
+@command{lzip}. @xref{gzip}.
+
@opsummary{lzma}
@item --lzma
@opsummary{new-volume-script}
@item --new-volume-script
-(see --info-script)
+(see @option{--info-script})
@opsummary{newer}
@item --newer=@var{date}
the permissions specified in the archive. This is the default behavior
for ordinary users.
+@opsummary{no-seek}
+@item --no-seek
+
+The archive media does not support seeks to arbitrary
+locations. Usually @command{tar} determines automatically whether
+the archive can be seeked or not. Use this option to disable this
+mechanism.
+
@opsummary{no-unquote}
@item --no-unquote
Treat all input file or member names literally, do not interpret
@opsummary{pax-option}
@item --pax-option=@var{keyword-list}
-This option is meaningful only with @acronym{POSIX.1-2001} archives
-(@pxref{posix}). It modifies the way @command{tar} handles the
+This option enables creation of the archive in @acronym{POSIX.1-2001}
+format (@pxref{posix}) and modifies the way @command{tar} handles the
extended header keywords. @var{Keyword-list} is a comma-separated
list of keyword options. @xref{PAX keywords}, for a detailed
discussion.
Assume that the archive media supports seeks to arbitrary
locations. Usually @command{tar} determines automatically whether
the archive can be seeked or not. This option is intended for use
-in cases when such recognition fails.
+in cases when such recognition fails. It takes effect only if the
+archive is open for reading (e.g. with @option{--list} or
+@option{--extract} options).
@opsummary{show-defaults}
@item --show-defaults
@smallexample
$ tar --show-defaults
---format=gnu -f- -b20 --quoting-style=escape \
+--format=gnu -f- -b20 --quoting-style=escape
--rmt-command=/usr/libexec/rmt --rsh-command=/usr/bin/rsh
@end smallexample
+@noindent
+Notice, that this option outputs only one line. The example output
+above has been split to fit page boundaries.
+
@opsummary{show-omitted-dirs}
@item --show-omitted-dirs
@noindent
would extract this file to file @file{name}.
-@opsummary{suffix}, summary
+@opsummary{suffix}
@item --suffix=@var{suffix}
Alters the suffix @command{tar} uses when backing up files from the default
@smallexample
tar (GNU tar) @value{VERSION}
-Copyright (C) 2008 Free Software Foundation, Inc.
-This is free software. You may redistribute copies of it under the terms
-of the GNU General Public License <http://www.gnu.org/licenses/gpl.html>.
+Copyright (C) 2010 Free Software Foundation, Inc.
+Copyright (C) 2010 Free Software Foundation, Inc.
+License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>.
+This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Written by John Gilmore and Jay Fenlason.
@command{tar} packages into a single one which would be called
@code{paxutils}. So, who knows if, one of this days, the
@option{--version} would not output @w{@samp{tar (@acronym{GNU}
-paxutils) 3.2}}}.
+paxutils) 3.2}}.}.
@cindex Obtaining help
@cindex Listing all @command{tar} options
@opindex usage
If you only wish to check the spelling of an option, running @kbd{tar
--usage} may be a better choice. This will display a terse list of
-@command{tar} option without accompanying explanations.
+@command{tar} options without accompanying explanations.
The short help output is quite succinct, and you might have to get
back to the full documentation for precise points. If you are reading
@smallexample
@group
-@kbd{tar --show-defaults}
+$ @kbd{tar --show-defaults}
--format=gnu -f- -b20 --quoting-style=escape
--rmt-command=/etc/rmt --rsh-command=/usr/bin/rsh
@end group
@section Controlling Warning Messages
Sometimes, while performing the requested task, @GNUTAR{} notices
-some conditions that are not exactly erros, but which the user
+some conditions that are not exactly errors, but which the user
should be aware of. When this happens, @command{tar} issues a
@dfn{warning message} describing the condition. Warning messages
are output to the standard error and they do not affect the exit
@cindex @samp{door ignored}, warning message
@item file-ignored
@samp{%s: Unknown file type; file ignored}
-@samp{%s: socket ignored}
+@*@samp{%s: socket ignored}
@*@samp{%s: door ignored}
@kwindex file-unchanged
@cindex @samp{file is unchanged; not dumped}, warning message
@samp{Current %s is newer or same age}
@kwindex unknown-keyword
@cindex @samp{Ignoring unknown extended header keyword `%s'}, warning message
-@item unknown-keyword
+@item unknown-keyword
@samp{Ignoring unknown extended header keyword `%s'}
@end table
@node Operations
@subsection The Five Advanced @command{tar} Operations
-@UNREVISED
+@cindex basic operations
In the last chapter, you learned about the first three operations to
@command{tar}. This chapter presents the remaining five operations to
@command{tar}: @option{--append}, @option{--update}, @option{--concatenate},
will give examples using the same directory and files that you created
in the last chapter. As you may recall, the directory is called
@file{practice}, the files are @samp{jazz}, @samp{blues}, @samp{folk},
-@samp{rock}, and the two archive files you created are
+and the two archive files you created are
@samp{collection.tar} and @samp{music.tar}.
We will also use the archive files @samp{afiles.tar} and
@node append
@subsection How to Add Files to Existing Archives: @option{--append}
-@UNREVISED
+@cindex appending files to existing archive
@opindex append
If you want to add files to an existing archive, you don't need to
create a new archive; you can use @option{--append} (@option{-r}).
Other operations don't deal with these members as perfectly as you might
prefer; if you were to use @option{--extract} to extract the archive,
-only the most recently added copy of a member with the same name as four
+only the most recently added copy of a member with the same name as
other members would end up in the working directory. This is because
@option{--extract} extracts an archive in the order the members appeared
in the archive; the most recently archived members will be extracted
last. Additionally, an extracted member will @emph{replace} a file of
the same name which existed in the directory already, and @command{tar}
will not prompt you about this@footnote{Unless you give it
-@option{--keep-old-files} option, or the disk copy is newer than the
+@option{--keep-old-files} option, or the disk copy is newer than
the one in the archive and you invoke @command{tar} with
-@option{--keep-newer-files} option}. Thus, only the most recently archived
+@option{--keep-newer-files} option.}. Thus, only the most recently archived
member will end up being extracted, as it will replace the one
extracted before it, and so on.
+@cindex extracting @var{n}th copy of the file
+@xopindex{occurrence, described}
There exists a special option that allows you to get around this
behavior and extract (or list) only a particular copy of the file.
This is @option{--occurrence} option. If you run @command{tar} with
@FIXME{ hag -- you might want to incorporate some of the above into the
MMwtSN node; not sure. i didn't know how to make it simpler...
-There are a few ways to get around this. (maybe xref Multiple Members
-with the Same Name.}
+There are a few ways to get around this. Xref to Multiple Members
+with the Same Name, maybe.}
@cindex Members, replacing with other members
@cindex Replacing members with other members
+@xopindex{delete, using before --append}
If you want to replace an archive member, use @option{--delete} to
-delete the member you want to remove from the archive, , and then use
+delete the member you want to remove from the archive, and then use
@option{--append} to add the member you want to be in the archive. Note
that you can not change the order of the archive; the most recently
added member will still appear last. In this sense, you cannot truly
@node appending files
@subsubsection Appending Files to an Archive
-@UNREVISED
@cindex Adding files to an Archive
@cindex Appending files to an Archive
@cindex Archives, Appending files to
+@opindex append
The simplest way to add a file to an already existing archive is the
@option{--append} (@option{-r}) operation, which writes specified
@node multiple
@subsubsection Multiple Members with the Same Name
+@cindex members, multiple
+@cindex multiple members
You can use @option{--append} (@option{-r}) to add copies of files
which have been updated since the archive was created. (However, we
@node update
@subsection Updating an Archive
-@UNREVISED
@cindex Updating an archive
-
@opindex update
+
In the previous section, you learned how to use @option{--append} to
add a file to an existing archive. A related operation is
@option{--update} (@option{-u}). The @option{--update} operation
@node how to update
@subsubsection How to Update an Archive Using @option{--update}
+@opindex update
You must use file name arguments with the @option{--update}
(@option{-u}) operation. If you don't specify any files,
the one at the end will be newer and larger, since you added text before
updating it.
-(The reason @command{tar} does not overwrite the older file when updating
+The reason @command{tar} does not overwrite the older file when updating
it is because writing to the middle of a section of tape is a difficult
process. Tapes are not designed to go backward. @xref{Media}, for more
information about tapes.
To use @option{--concatenate}, give the first archive with
@option{--file} option and name the rest of archives to be
concatenated on the command line. The members, and their member
-names, will be copied verbatim from those archives to the first one.
-@footnote{This can cause multiple members to have the same name, for
-information on how this affects reading the archive, @ref{multiple}.}
+names, will be copied verbatim from those archives to the first
+one@footnote{This can cause multiple members to have the same name, for
+information on how this affects reading the archive, @ref{multiple}.}.
The new, concatenated archive will be called by the same name as the
one given with the @option{--file} option. As usual, if you omit
@option{--file}, @command{tar} will use the value of the environment
@node delete
@subsection Removing Archive Members Using @option{--delete}
-@UNREVISED
@cindex Deleting files from an archive
@cindex Removing files from an archive
folk
jazz
rock
-$
@end smallexample
@FIXME{Check if the above listing is actually produced after running
@node compare
@subsection Comparing Archive Members with the File System
@cindex Verifying the currency of an archive
-@UNREVISED
@opindex compare
The @option{--compare} (@option{-d}), or @option{--diff} operation compares
The spirit behind the @option{--compare} (@option{--diff},
@option{-d}) option is to check whether the archive represents the
current state of files on disk, more than validating the integrity of
-the archive media. For this later goal, @xref{verify}.
+the archive media. For this latter goal, @xref{verify}.
@node create options
@section Options Used by @option{--create}
the modification time of members when creating archives, instead of
their actual modification times. The argument @var{date} can be
either a textual date representation in almost arbitrary format
-(@pxref{Date input formats}) or a name of the existing file, starting
+(@pxref{Date input formats}) or a name of an existing file, starting
with @samp{/} or @samp{.}. In the latter case, the modification time
of that file will be used.
archives. For example:
@smallexample
-@group
$ @kbd{tar -c -f archive.tar --owner=0 .}
-# @r{Or:}
+@end smallexample
+
+@noindent
+or:
+
+@smallexample
$ @kbd{tar -c -f archive.tar --owner=root .}
-@end group
@end smallexample
@item --group=@var{group}
@node extract options
@section Options Used by @option{--extract}
-@UNREVISED
+@cindex options for use with @option{--extract}
@xopindex{extract, additional options}
The previous chapter showed how to use @option{--extract} to extract
@node Reading
@subsection Options to Help Read Archives
@cindex Options when reading archives
-@UNREVISED
@cindex Reading incomplete records
@cindex Records, incomplete
directory timestamp will be offset again.
To correctly restore directory meta-information in such cases, use
-@option{delay-directory-restore} command line option:
+the @option{--delay-directory-restore} command line option:
@table @option
@opindex delay-directory-restore
Extract files and pipe their contents to the standard input of
@var{command}. When this option is used, instead of creating the
files specified, @command{tar} invokes @var{command} and pipes the
-contents of the files to its standard output. @var{Command} may
+contents of the files to its standard output. The @var{command} may
contain command line arguments. The program is executed via
@code{sh -c}. Notice, that @var{command} is executed once for each regular file
extracted. Non-regular files (directories, etc.) are ignored when this
@vrindex TAR_ATIME, to-command environment
@item TAR_ATIME
Time of last access. It is a decimal number, representing seconds
-since the epoch. If the archive provides times with nanosecond
+since the Epoch. If the archive provides times with nanosecond
precision, the nanoseconds are appended to the timestamp after a
decimal point.
GID of the file owner.
@end table
-In addition to these variables, @env{TAR_VERSION} contains the
+Additionally, the following variables contain information about
+tar mode and the archive being processed:
+
+@table @env
+@vrindex TAR_VERSION, to-command environment
+@item TAR_VERSION
@GNUTAR{} version number.
+@vrindex TAR_ARCHIVE, to-command environment
+@item TAR_ARCHIVE
+The name of the archive @command{tar} is processing.
+
+@vrindex TAR_BLOCKING_FACTOR, to-command environment
+@item TAR_BLOCKING_FACTOR
+Current blocking factor (@pxref{Blocking}).
+
+@vrindex TAR_VOLUME, to-command environment
+@item TAR_VOLUME
+Ordinal number of the volume @command{tar} is processing.
+
+@vrindex TAR_FORMAT, to-command environment
+@item TAR_FORMAT
+Format of the archive being processed. @xref{Formats}, for a complete
+list of archive format names.
+@end table
+
If @var{command} exits with a non-0 status, @command{tar} will print
an error message similar to the following:
For example, here is how you might copy a directory's contents from
one disk to another, while preserving the dates, modes, owners and
link-structure of all the files therein. In this case, the transfer
-medium is a @dfn{pipe}, which is one a Unix redirection mechanism:
+medium is a @dfn{pipe}:
@smallexample
$ @kbd{(cd sourcedir; tar -cf - .) | (cd targetdir; tar -xf -)}
@end smallexample
@noindent
-The command also works using short option forms:
+The command also works using long option forms:
@smallexample
$ @kbd{(cd sourcedir; tar --create --file=- . ) \
| (cd targetdir; tar --extract --file=-)}
-# Or:
+@end smallexample
+
+@noindent
+or
+
+@smallexample
$ @kbd{tar --directory sourcedir --create --file=- . ) \
| tar --directory targetdir --extract --file=-}
@end smallexample
@node Backups
@chapter Performing Backups and Restoring Files
-@UNREVISED
+@cindex backups
-@GNUTAR{} is distributed along with the scripts
-which the Free Software Foundation uses for performing backups. There
-is no corresponding scripts available yet for doing restoration of
-files. Even if there is a good chance those scripts may be satisfying
-to you, they are not the only scripts or methods available for doing
+@GNUTAR{} is distributed along with the scripts for performing backups
+and restores. Even if there is a good chance those scripts may be
+satisfying to you, they are not the only scripts or methods available for doing
backups and restore. You may well create your own, or use more
sophisticated packages dedicated to that purpose.
Some users are enthusiastic about @code{Amanda} (The Advanced Maryland
Automatic Network Disk Archiver), a backup system developed by James
da Silva @file{jds@@cs.umd.edu} and available on many Unix systems.
-This is free software, and it is available at these places:
-
-@smallexample
-http://www.cs.umd.edu/projects/amanda/amanda.html
-ftp://ftp.cs.umd.edu/pub/amanda
-@end smallexample
+This is free software, and it is available from @uref{http://www.amanda.org}.
@FIXME{
backups: @option{--listed-incremental=@var{snapshot-file}} (@option{-g
@var{snapshot-file}}) and @option{--incremental} (@option{-G}).
-@opindex listed-incremental
+@xopindex{listed-incremental, described}
The option @option{--listed-incremental} instructs tar to operate on
an incremental archive with additional metadata stored in a standalone
file, called a @dfn{snapshot file}. The purpose of this file is to help
/usr}
@end smallexample
+@anchor{--level=0}
+@xopindex{level, described}
+You can force @samp{level 0} backups either by removing the snapshot
+file before running @command{tar}, or by supplying the
+@option{--level=0} option, e.g.:
+
+@smallexample
+$ @kbd{tar --create \
+ --file=archive.2.tar \
+ --listed-incremental=/var/log/usr.snar-0 \
+ --level=0 \
+ /usr}
+@end smallexample
+
Incremental dumps depend crucially on time stamps, so the results are
unreliable if you modify a file's time stamps during dumping (e.g.,
with the @option{--atime-preserve=replace} option), or if you set the clock
@anchor{device numbers}
@cindex Device numbers, using in incremental backups
Metadata stored in snapshot files include device numbers, which,
-obviously are supposed to be a non-volatile values. However, it turns
+obviously are supposed to be non-volatile values. However, it turns
out that @acronym{NFS} devices have undependable values when an automounter
gets in the picture. This can lead to a great deal of spurious
redumping in incremental dumps, so it is somewhat useless to compare
two @acronym{NFS} devices numbers over time. The solution implemented
-currently is to considers all @acronym{NFS} devices as being equal
+currently is to consider all @acronym{NFS} devices as being equal
when it comes to comparing directories; this is fairly gross, but
there does not seem to be a better way to go.
Alternatively, you can use @option{--incremental}, which needs no
arguments. In general, @option{--incremental} (@option{-G}) can be
used as a shortcut for @option{--listed-incremental} when listing or
-extracting incremental backups (for more information, regarding this
+extracting incremental backups (for more information regarding this
option, @pxref{incremental-op}).
When extracting from the incremental backup @GNUTAR{} attempts to
@option{--incremental} or @option{--listed-incremental} option was
given, no matter what the verbosity level. This behavior, and,
especially, the binary output it produced were considered inconvenient
-and were changed in version 1.16}:
+and were changed in version 1.16.}:
@smallexample
@kbd{tar --list --incremental --verbose --verbose archive.tar}
only extracting two archives---the last weekly (full) dump and the
last daily (level one) dump. The only information lost would be in
files changed or created since the last daily backup. (Doing dumps
-more than once a day is usually not worth the trouble).
+more than once a day is usually not worth the trouble.)
@GNUTAR{} comes with scripts you can use to do full
and level-one (actually, even level-two and so on) dumps. Using
(for @code{restore}). These should be accessible from the machine on
which the backup script is run.
-If the list of file systems is very long you may wish to store it
+If the list of individual files is very long you may wish to store it
in a separate file. This file is usually named
@file{/etc/backup/files}, but this name may be overridden in
@file{backup-specs} using @code{FILELIST} variable.
@subsection Magnetic Tape Control
Backup scripts access tape device using special @dfn{hook functions}.
-These functions take a single argument -- the name of the tape
+These functions take a single argument --- the name of the tape
device. Their names are kept in the following variables:
@defvr {Backup variable} MT_BEGIN
@end table
@end deffn
-Following variables keep the names of user hook functions
+Following variables keep the names of user hook functions:
@defvr {Backup variable} DUMP_BEGIN
Dump begin function. It is executed before dumping the file system.
backup --level=@var{level} --time=@var{time}
@end smallexample
-The @option{level} option requests the dump level. Thus, to produce
+The @option{--level} option requests the dump level. Thus, to produce
a full dump, specify @code{--level=0} (this is the default, so
-@option{--level} may be omitted if its value is @code{0}).
-@footnote{For backward compatibility, the @code{backup} will also
+@option{--level} may be omitted if its value is
+@code{0})@footnote{For backward compatibility, the @code{backup} will also
try to deduce the requested dump level from the name of the
script itself. If the name consists of a string @samp{level-}
followed by a single decimal digit, that digit is taken as
the dump level number. Thus, you may create a link from @code{backup}
to @code{level-1} and then run @code{level-1} whenever you need to
-create a level one dump.}
+create a level one dump.}.
The @option{--time} option determines when should the backup be
run. @var{Time} may take three forms:
@item @var{hh}
-The dump must be run at @var{hh} hours
+The dump must be run at @var{hh} hours.
@item now
@file{backup-specs} (@pxref{General-Purpose Variables,BACKUP_DIRS}).
You may select the file systems (and/or files) to restore by
-giving @code{restore} list of @dfn{patterns} in its command
+giving @code{restore} a list of @dfn{patterns} in its command
line. For example, running
@smallexample
@table @option
@item -a
@itemx --all
-Restore all file systems and files specified in @file{backup-specs}
+Restore all file systems and files specified in @file{backup-specs}.
@item -l @var{level}
@itemx --level=@var{level}
@node Choosing
@chapter Choosing Files and Names for @command{tar}
-@UNREVISED
Certain options to @command{tar} enable you to specify a name for your
archive. Other options let you decide which files to include or exclude
@node file
@section Choosing and Naming Archive Files
-@UNREVISED
@cindex Naming an archive
@cindex Archive Name
@cindex Choosing an archive file
@cindex Where is the archive?
+@opindex file
By default, @command{tar} uses an archive file name that was compiled when
it was built on the system; usually this name refers to some physical
tape drive on the machine. However, the person who installed @command{tar}
@end smallexample
@noindent
-@command{tar} will complete the remote connection, if possible, and
+@command{tar} will set up the remote connection, if possible, and
prompt you for a username and password. If you use
@option{--file=@@@var{hostname}:/@var{dev}/@var{file-name}}, @command{tar}
-will complete the remote connection, if possible, using your username
+will attempt to set up the remote connection using your username
as the username on the remote machine.
@cindex Local and remote archives
(along with the @samp{@@} sign), then your user name will be used.
(This is the normal @command{rsh} behavior.) It is necessary for the
remote machine, in addition to permitting your @command{rsh} access, to
-have the @file{rmt} program installed (This command is included in
+have the @file{rmt} program installed (this command is included in
the @GNUTAR{} distribution and by default is installed under
-@file{@var{prefix}/libexec/rmt}, were @var{prefix} means your
+@file{@var{prefix}/libexec/rmt}, where @var{prefix} means your
installation prefix). If you need to use a file whose name includes a
colon, then the remote tape drive behavior
can be inhibited by using the @option{--force-local} option.
@cindex Reading file names from a file
@cindex Lists of file names
@cindex File Name arguments, alternatives
+@cindex @command{find}, using with @command{tar}
Instead of giving the names of files or archive members on the command
line, you can put the names into a file, and then use the
@option{--files-from=@var{file-of-names}} (@option{-T
more information.)
@smallexample
-$ @kbd{find . -size -400 -print > small-files}
+$ @kbd{find . -size -400 -print > small-files}
$ @kbd{tar -c -v -z -T small-files -f little.tgz}
@end smallexample
@noindent
In the file list given by @option{-T} option, any file name beginning
with @samp{-} character is considered a @command{tar} option and is
-processed accordingly.@footnote{Versions of @GNUTAR{} up to 1.15.1
+processed accordingly@footnote{Versions of @GNUTAR{} up to 1.15.1
recognized only @option{-C} option in file lists, and only if the
-option and its argument occupied two consecutive lines.} For example,
+option and its argument occupied two consecutive lines.}. For example,
the common use of this feature is to change to another directory by
specifying @option{-C} option:
@end menu
@node nul
-@subsection @code{NUL} Terminated File Names
+@subsection @code{NUL}-Terminated File Names
@cindex File names, terminated by @code{NUL}
-@cindex @code{NUL} terminated file names
+@cindex @code{NUL}-terminated file names
The @option{--null} option causes
@option{--files-from=@var{file-of-names}} (@option{-T @var{file-of-names}})
to read file names terminated by a @code{NUL} instead of a newline, so
@table @option
@xopindex{null, described}
@item --null
-Only consider @code{NUL} terminated file names, instead of files that
+Only consider @code{NUL}-terminated file names, instead of files that
terminate in a newline.
@xopindex{no-null, described}
@file{long-files}. The @option{-print0} option to @command{find} is just
like @option{-print}, except that it separates files with a @code{NUL}
rather than with a newline. You can then run @command{tar} with both the
-@option{--null} and @option{-T} options to specify that @command{tar} get the
+@option{--null} and @option{-T} options to specify that @command{tar} gets the
files from that file, @file{long-files}, to create the archive
@file{big.tgz}. The @option{--null} option to @command{tar} will cause
@command{tar} to recognize the @code{NUL} separator between files.
@smallexample
-$ @kbd{find . -size +800 -print0 > long-files}
+$ @kbd{find . -size +800 -print0 > long-files}
$ @kbd{tar -c -v --null --files-from=long-files --file=big.tar}
@end smallexample
The @option{--no-null} option can be used if you need to read both
-zero-terminated and newline-terminated files on the same command line.
+@code{NUL}-terminated and newline-terminated files on the same command line.
For example, if @file{flist} is a newline-terminated file, then the
following command can be used to combine it with the above command:
@smallexample
@group
-$ @kbd{find . -size +800 -print0 |
+$ @kbd{find . -size +800 -print0 |
tar -c -f big.tar --null -T - --no-null -T flist}
@end group
@end smallexample
This example uses short options for typographic reasons, to avoid
very long lines.
-@GNUTAR is able to automatically detect null-terminated file lists, so
+@GNUTAR is able to automatically detect @code{NUL}-terminated file lists, so
it is safe to use them even without the @option{--null} option. In
this case @command{tar} will print a warning and continue reading such
a file as if @option{--null} were actually given:
@smallexample
@group
-$ @kbd{find . -size +800 -print0 | tar -c -f big.tar -T -}
+$ @kbd{find . -size +800 -print0 | tar -c -f big.tar -T -}
tar: -: file name read contains nul character
@end group
@end smallexample
@node exclude
@section Excluding Some Files
-@UNREVISED
@cindex File names, excluding files by
@cindex Excluding files by name and pattern
@cindex Excluding files by file system
+@opindex exclude
+@opindex exclude-from
To avoid operating on files whose names match a particular pattern,
use the @option{--exclude} or @option{--exclude-from} options.
However, empty lines are OK.
+@table @option
@cindex version control system, excluding files
@cindex VCS, excluding files
@cindex SCCS, excluding files
@cindex Arch, excluding files
@cindex Mercurial, excluding files
@cindex Darcs, excluding files
-@table @option
@opindex exclude-vcs
@item --exclude-vcs
Exclude files and directories used by following version control
systems: @samp{CVS}, @samp{RCS}, @samp{SCCS}, @samp{SVN}, @samp{Arch},
@samp{Bazaar}, @samp{Mercurial}, and @samp{Darcs}.
-@end table
As of version @value{VERSION}, the following files are excluded:
@item @file{_darcs}
@end itemize
+@opindex exclude-backups
+@item --exclude-backups
+Exclude backup and lock files. This option causes exclusion of files
+that match the following shell globbing patterns:
+
+@table @asis
+@item .#*
+@item *~
+@item #*#
+@end table
+
+@end table
+
@findex exclude-caches
When creating an archive, the @option{--exclude-caches} option family
causes @command{tar} to exclude all directories that contain a @dfn{cache
@command{Tar} archives contain detailed information about files stored
in them and full file names are part of that information. When
-storing file to an archive, its file name is recorded in it,
+storing a file to an archive, its file name is recorded in it,
along with the actual file contents. When restoring from an archive,
a file is created on disk with exactly the same name as that stored
in the archive. In the majority of cases this is the desired behavior
@var{regexp} and @var{replace} are described in detail in
@ref{The "s" Command, The "s" Command, The `s' Command, sed, GNU sed}.
-Any delimiter can be used in lieue of @samp{/}, the only requirement being
+Any delimiter can be used in lieu of @samp{/}, the only requirement being
that it be used consistently throughout the expression. For example,
the following two expressions are equivalent:
just the first.
@item i
-Use case-insensitive matching
+Use case-insensitive matching.
@item x
@var{regexp} is an @dfn{extended regular expression} (@pxref{Extended
@end smallexample
This is definitely not desired. To avoid this, the @samp{S} flag
-are used, which excludes symbolic link targets from filename
+is used, which excludes symbolic link targets from filename
transformations. The result is:
@smallexample
@node after
@section Operating Only on New Files
-@UNREVISED
@cindex Excluding file by age
@cindex Data Modification time, excluding files by
modification of the file's data (rather than status
changes), then use the @option{--newer-mtime=@var{date}} option.
+@cindex --after-date and --update compared
+@cindex --newer-mtime and --update compared
You may use these options with any operation. Note that these options
differ from the @option{--update} (@option{-u}) operation in that they
allow you to specify a particular date against which @command{tar} can
@node recurse
@section Descending into Directories
-@UNREVISED
@cindex Avoiding recursion in directories
@cindex Descending directories, avoiding
@cindex Directories, avoiding recursion
@cindex Recursion in directories, avoiding
-@FIXME{arrggh! this is still somewhat confusing to me. :-< }
-
Usually, @command{tar} will recursively explore all directories (either
those given on the command line or through the @option{--files-from}
option) for the various files they contain. However, you may not always
want @command{tar} to act this way.
@opindex no-recursion
+@cindex @command{find}, using with @command{tar}
The @option{--no-recursion} option inhibits @command{tar}'s recursive descent
into specified directories. If you specify @option{--no-recursion}, you can
-use the @command{find} utility for hunting through levels of directories to
+use the @command{find} (@pxref{Top,, find, find, GNU Find Manual})
+utility for hunting through levels of directories to
construct a list of file names which you could then pass to @command{tar}.
@command{find} allows you to be more selective when choosing which files to
archive; see @ref{files}, for more information on using @command{find} with
-@command{tar}, or look.
+@command{tar}.
@table @option
@item --no-recursion
@node one
@section Crossing File System Boundaries
@cindex File system boundaries, not crossing
-@UNREVISED
@command{tar} will normally automatically cross file system boundaries in
order to archive files which are part of a directory tree. You can
which records the third file in the archive under the name
@file{red/cherry} so that, if the archive is extracted using
@samp{tar --extract}, the third file will be written in a subdirectory
-named @file{orange-colored}.
+named @file{red}.
You can use the @option{--directory} option to make the archive
independent of the original name of the directory holding the files.
@node absolute
@subsection Absolute File Names
-@UNREVISED
+@cindex absolute file names
+@cindex file names, absolute
+
+By default, @GNUTAR{} drops a leading @samp{/} on
+input or output, and complains about file names containing a @file{..}
+component. There is an option that turns off this behavior:
@table @option
@opindex absolute-names
containing a @file{..} file name component.
@end table
-By default, @GNUTAR{} drops a leading @samp{/} on
-input or output, and complains about file names containing a @file{..}
-component. This option turns off this behavior.
-
When @command{tar} extracts archive members from an archive, it strips any
leading slashes (@samp{/}) from the member name. This causes absolute
member names in the archive to be treated as relative file names. This
leading slashes from member names when putting members into the
archive. For example, if you ask @command{tar} to add the file
@file{/bin/ls} to an archive, it will do so, but the member name will
-be @file{bin/ls}.@footnote{A side effect of this is that when
+be @file{bin/ls}@footnote{A side effect of this is that when
@option{--create} is used with @option{--verbose} the resulting output
is not, generally speaking, the same as the one you'd get running
@kbd{tar --list} command. This may be important if you use some
scripts for comparing both outputs. @xref{listing member and file names},
-for the information on how to handle this case.}
+for the information on how to handle this case.}.
If you use the @option{--absolute-names} (@option{-P}) option,
@command{tar} will do none of these transformations.
@FIXME{Should be an example in the tutorial/wizardry section using this
to transfer files between systems.}
-@FIXME{Is write access an issue?}
-
@table @option
@item --absolute-names
Preserves full file names (including superior directory names) when
@end table
-@FIXME{this is still horrible; need to talk with dan on monday.}
-
@command{tar} prints out a message about removing the @samp{/} from
file names. This message appears once per @GNUTAR{}
invocation. It represents something which ought to be told; ignoring
@cindex gzip
@cindex bzip2
+@cindex lzip
@cindex lzma
@cindex lzop
@cindex compress
@GNUTAR{} is able to create and read compressed archives. It supports
-@command{gzip}, @command{bzip2}, @command{lzma} and @command{lzop} compression
-programs. For backward compatibility, it also supports
-@command{compress} command, although we strongly recommend against
-using it, because it is by far less effective than other compression
-programs@footnote{It also had patent problems in the past.}.
+a wide variety of compression programs, namely: @command{gzip},
+@command{bzip2}, @command{lzip}, @command{lzma}, @command{lzop},
+@command{xz} and traditional @command{compress}. The latter is
+supported mostly for backward compatibility, and we recommend
+against using it, because it is by far less effective than the other
+compression programs@footnote{It also had patent problems in the past.}.
Creating a compressed archive is simple: you just specify a
@dfn{compression option} along with the usual archive creation
commands. The compression option is @option{-z} (@option{--gzip}) to
create a @command{gzip} compressed archive, @option{-j}
(@option{--bzip2}) to create a @command{bzip2} compressed archive,
+@option{--lzip} to create an @asis{lzip} compressed archive,
@option{-J} (@option{--xz}) to create an @asis{XZ} archive,
@option{--lzma} to create an @asis{LZMA} compressed
archive, @option{--lzop} to create an @asis{LSOP} archive, and
Notice also, that there are several restrictions on operations on
compressed archives. First of all, compressed archives cannot be
-modified, i.e., you cannot update (@option{--update} (@option{-u}))
+modified, i.e., you cannot update (@option{--update}, alias @option{-u})
them or delete (@option{--delete}) members from them or
-add (@option{--append} (@option{-r})) members to them. Likewise, you
+add (@option{--append}, alias @option{-r}) members to them. Likewise, you
cannot append another @command{tar} archive to a compressed archive using
-@option{--concatenate} (@option{-A})). Secondly, multi-volume
+@option{--concatenate} (@option{-A}). Secondly, multi-volume
archives cannot be compressed.
The following table summarizes compression options used by @GNUTAR{}.
@item @samp{.tz2} @tab @command{bzip2}
@item @samp{.tbz2} @tab @command{bzip2}
@item @samp{.tbz} @tab @command{bzip2}
+@item @samp{.lz} @tab @command{lzip}
@item @samp{.lzma} @tab @command{lzma}
@item @samp{.tlz} @tab @command{lzma}
@item @samp{.lzo} @tab @command{lzop}
@itemx --bzip2
Filter the archive through @code{bzip2}. Otherwise like @option{--gzip}.
+@opindex lzip
+@item --lzip
+Filter the archive through @command{lzip}. Otherwise like @option{--gzip}.
+
@opindex lzma
@item --lzma
Filter the archive through @command{lzma}. Otherwise like @option{--gzip}.
@item --use-compress-program=@var{prog}
@itemx -I=@var{prog}
Use external compression program @var{prog}. Use this option if you
-have a compression program that @GNUTAR{} does not support. There
-are two requirements to which @var{prog} should comply:
+are not happy with the compression program associated with the suffix
+at compile time or if you have a compression program that @GNUTAR{}
+does not support. There are two requirements to which @var{prog}
+should comply:
First, when called without options, it should read data from standard
input, compress it and output it on standard output.
#! /bin/sh
case $1 in
-d) gpg --decrypt - | gzip -d -c;;
-'') gzip -c | gpg -s ;;
+'') gzip -c | gpg -s;;
*) echo "Unknown option $1">&2; exit 1;;
esac
@end group
@node Attributes
@section Handling File Attributes
-@UNREVISED
+@cindex atrributes, files
+@cindex file attributes
When @command{tar} reads files, it updates their access times. To
avoid this, use the @option{--atime-preserve[=METHOD]} option, which can either
reset the access time retroactively or avoid changing it in the first
place.
-Handling of file attributes
-
@table @option
@opindex atime-preserve
@item --atime-preserve
The numeric ids are @emph{always} saved into @command{tar} archives.
The identifying names are added at create time when provided by the
-system, unless @option{--old-archive} (@option{-o}) is used. Numeric ids could be
+system, unless @option{--format=oldgnu} is used. Numeric ids could be
used when moving archives between a collection of machines using
a centralized management for attribution of numeric ids to users
and groups. This is often made through using the NIS capabilities.
@node hard links
@subsection Hard Links
-@UNREVISED{}
@cindex File names, using hard links
@cindex hard links, dereferencing
@cindex dereferencing hard links
produces the following diagnostics:
@smallexample
-$ tar -c -f ../archive.tar jeden
+$ tar -c -f ../archive.tar -l jeden
tar: Missing links to `jeden'.
@end smallexample
%d/PaxHeaders.%p/%f
@end smallexample
+@item exthdr.mtime=@var{value}
+
+This keyword defines the value of the @samp{mtime} field that
+is written into the ustar header blocks for the extended headers.
+By default, the @samp{mtime} field is set to the modification time
+of the archive member described by that extended headers.
+
@item globexthdr.name=@var{string}
This keyword allows user control over the name that is written into
the ustar header blocks for global extended header records. The name
environment variable. If @var{TMPDIR} is not set, @command{tar}
uses @samp{/tmp}.
+@item globexthdr.mtime=@var{value}
+
+This keyword defines the value of the @samp{mtime} field that
+is written into the ustar header blocks for the global extended headers.
+By default, the @samp{mtime} field is set to the time when
+@command{tar} was invoked.
+
@item @var{keyword}=@var{value}
When used with one of archive-creation commands, these keyword/value pairs
will be included at the beginning of the archive in a global extended
stored in the archive.
@end table
+In any of the forms described above, the @var{value} may be
+a string enclosed in curly braces. In that case, the string
+between the braces is understood either as a textual time
+representation, as described in @ref{Date input formats}, or a name of
+the existing file, starting with @samp{/} or @samp{.}. In the latter
+case, the modification time of that file is used.
+
+For example, to set all modification times to the current date, you
+use the following option:
+
+@smallexample
+--pax-option='mtime:=@{now@}'
+@end smallexample
+
+Note quoting of the option's argument.
+
+@cindex archives, binary equivalent
+@cindex binary equivalent archives, creating
+As another example, here is the option that ensures that any two
+archives created using it, will be binary equivalent if they have the
+same contents:
+
+@smallexample
+--pax-option=exthdr.name=%d/PaxHeaders/%f,atime:=0
+@end smallexample
+
@node Checksumming
@subsection Checksumming Problems
restore their missing files with an incompatible file extractor, or
vice versa.
-@GNUTAR{} compute checksums both ways, and accept
+@GNUTAR{} computes checksums both ways, and accept
any on read, so @acronym{GNU} tar can read Sun tapes even with their
wrong checksums. @GNUTAR{} produces the standard
checksum, however, raising incompatibilities with Sun. That is to
@cindex large values
@cindex future time stamps
@cindex negative time stamps
-@UNREVISED{}
+@UNREVISED
The above sections suggest to use @samp{oldest possible} archive
format if in doubt. However, sometimes it is not possible. If you
(4.3-tahoe and later).
@command{tar}'s way of handling multiple hard links to a file can handle
-file systems that support 32-bit inumbers (e.g., the @acronym{BSD} file system);
+file systems that support 32-bit i-numbers (e.g., the @acronym{BSD} file system);
@command{cpio}s way requires you to play some games (in its ``binary''
format, i-numbers are only 16 bits, and in its ``portable @acronym{ASCII}'' format,
they're 18 bits---it would have to play games with the "file system @acronym{ID}"
The exact path to this utility is determined when configuring the package.
It is @file{@var{prefix}/libexec/rmt}, where @var{prefix} stands for
your installation prefix. This location may also be overridden at
-runtime by using @option{rmt-command=@var{command}} option (@xref{Option Summary,
+runtime by using the @option{--rmt-command=@var{command}} option (@xref{Option Summary,
---rmt-command}, for detailed description of this option. @xref{Remote
Tape Server}, for the description of @command{rmt} command).
@end table
@node Remote Tape Server
-@section The Remote Tape Server
+@section Remote Tape Server
@cindex remote tape drive
@pindex rmt
written). This is currently possible only on two kinds of files: normal
disk files (or any other file that can be backspaced with @samp{lseek}),
and industry-standard 9-track magnetic tape (or any other kind of tape
-that can be backspaced with the @code{MTIOCTOP} @code{ioctl}.
+that can be backspaced with the @code{MTIOCTOP} @code{ioctl}).
This means that the @option{--append}, @option{--concatenate}, and
@option{--delete} commands will not work on any other kind of file.
@node Blocking
@section Blocking
-@UNREVISED
+@cindex block
+@cindex record
@dfn{Block} and @dfn{record} terminology is rather confused, and it
is also confusing to the expert reader. On the other hand, readers
blocking factor (particularly if you're not sure what the blocking factor
is), you can usually use the @option{--read-full-records} (@option{-B}) option while
specifying a blocking factor larger then the blocking factor of the archive
-(i.e., @samp{tar --extract --read-full-records --blocking-factor=300}.
+(i.e., @samp{tar --extract --read-full-records --blocking-factor=300}).
@xref{list}, for more information on the @option{--list} (@option{-t})
operation. @xref{Reading}, for a more detailed explanation of that option.
@table @option
@item -b @var{blocks}
@itemx --blocking-factor=@var{blocks}
-Set record size to @math{@var{blocks} * 512} bytes.
+Set record size to @math{@var{blocks}*512} bytes.
This option is used to specify a @dfn{blocking factor} for the archive.
When reading or writing the archive, @command{tar}, will do reads and writes
full stop, and for later regaining the reading or writing speed.
When the tape driver starts reading a record, the record has to
be read whole without stopping, as a tape gap is needed to stop the
-tape motion without loosing information.
+tape motion without losing information.
@cindex Exabyte blocking
@cindex DAT blocking
Moves tape position back @var{number} files.
@item rewind
-Rewinds the tape. (Ignores @var{number}).
+Rewinds the tape. (Ignores @var{number}.)
@item offline
@itemx rewoff1
-Rewinds the tape and takes the tape device off-line. (Ignores @var{number}).
+Rewinds the tape and takes the tape device off-line. (Ignores @var{number}.)
@item status
Prints status information about the tape unit.
@end table
-@FIXME{Is there a better way to frob the spacing on the list?}
-
If you don't specify a @var{tapename}, @command{mt} uses the environment
variable @env{TAPE}; if @env{TAPE} is not set, @command{mt} will use
the default device specified in your @file{sys/mtio.h} file
the @option{--create} option (@pxref{create}). A @dfn{multi-volume}
archive can be manipulated like any other archive (provided the
@option{--multi-volume} option is specified), but is stored on more
-than one tape or disk.
+than one tape or file.
When you specify @option{--multi-volume}, @command{tar} does not report an
error when it comes to the end of an archive volume (when reading), or
@table @kbd
@item ?
-Request @command{tar} to explain possible responses
+Request @command{tar} to explain possible responses.
@item q
Request @command{tar} to exit immediately.
@item n @var{file-name}
Request @command{tar} to run a subshell. This option can be disabled
by giving @option{--restrict} command line option to
@command{tar}@footnote{@xref{--restrict}, for more information about
-this option}.
+this option.}.
@item y
Request @command{tar} to begin writing the next volume.
@end table
@vrindex TAR_BLOCKING_FACTOR, info script environment variable
@item TAR_BLOCKING_FACTOR
-Current blocking factor (@pxref{Blocking}.
+Current blocking factor (@pxref{Blocking}).
@vrindex TAR_VOLUME, info script environment variable
@item TAR_VOLUME
@vrindex TAR_SUBCOMMAND, info script environment variable
@item TAR_SUBCOMMAND
-A short option describing the operation @command{tar} is executing
+A short option describing the operation @command{tar} is executing.
@xref{Operations}, for a complete list of subcommand options.
@vrindex TAR_FORMAT, info script environment variable
@node Tape Files
@subsection Tape Files
+@cindex labeling archives
+@opindex label
@UNREVISED
To give the archive a name which will be recorded in it, use the
@option{--multi-volume} (@pxref{Using Multiple Tapes}), then the
volume label will have @samp{Volume @var{nnn}} appended to the name
you give, where @var{nnn} is the number of the volume of the archive.
-(If you use the @option{--label=@var{volume-label}}) option when
+If you use the @option{--label=@var{volume-label}}) option when
reading an archive, it checks to make sure the label on the tape
matches the one you give. @xref{label}.
the archive is being created, when used in conjunction with the
@option{--create} operation. Checks to make sure the archive label
matches the one specified (when used in conjunction with any other
-operation.
+operation).
@end table
If you create an archive using both
@group
$ @kbd{tar cfMV /dev/tape "Daily backup for `date +%Y-%m-%d`"}
$ @kbd{tar --create --file=/dev/tape --multi-volume \
- --volume="Daily backup for `date +%Y-%m-%d`"}
+ --label="Daily backup for `date +%Y-%m-%d`"}
@end group
@end smallexample
Once an archive is written, you should write protect the media to prevent
the archive from being accidentally overwritten or deleted. (This will
protect the archive from being changed with a tape or floppy drive---it
-will not protect it from magnet fields or other physical hazards).
+will not protect it from magnet fields or other physical hazards.)
The write protection device itself is usually an integral part of the
physical media, and can be a two position (write enabled/write
tar: Error exit delayed from previous errors
@end smallexample
-To treat member names as globbing patterns, use --wildcards option.
+To treat member names as globbing patterns, use the @option{--wildcards} option.
If you want to tar to mimic the behavior of versions prior to 1.15.91,
add this option to your @env{TAR_OPTIONS} variable.
distribution tarballs. @xref{Formats,v7}, for the detailed discussion
of this issue and its implications.
-@FIXME{Change the first argument to tar-formats when the new Automake is
-out. The proposition to add @anchor{} to the appropriate place of its
-docs was accepted by Automake people --Sergey 2006-05-25}.
-@xref{Options, tar-v7, Changing Automake's Behavior,
+@xref{Options, tar-formats, Changing Automake's Behavior,
automake, GNU Automake}, for a description on how to use various
archive formats with @command{automake}.
Earlier versions of @GNUTAR{} understood @option{-l} option as a
synonym for @option{--one-file-system}. Since such usage contradicted
to UNIX98 specification and harmed compatibility with other
-implementation, it was declared deprecated in version 1.14. However,
+implementations, it was declared deprecated in version 1.14. However,
to facilitate transition to its new semantics, it was supported by
versions 1.15 and 1.15.90. The present use of @option{-l} as a short
variant of @option{--check-links} was introduced in version 1.15.91.