+@xopindex{same-permissions, short description}
+@xopindex{preserve-permissions, short description}
+@item -p
+@itemx --same-permissions
+@itemx --preserve-permissions
+Extract all protection information.
+
+This option causes @command{tar} to set the modes (access permissions) of
+extracted files exactly as recorded in the archive. If this option
+is not used, the current @code{umask} setting limits the permissions
+on extracted files. This option is by default enabled when
+@command{tar} is executed by a superuser.
+
+
+This option is meaningless with @option{--list} (@option{-t}).
+
+@opindex preserve
+@item --preserve
+Same as both @option{--same-permissions} and @option{--same-order}.
+
+This option is deprecated, and will be removed in @GNUTAR{} version 1.23.
+
+@end table
+
+@node Portability
+@section Making @command{tar} Archives More Portable
+
+Creating a @command{tar} archive on a particular system that is meant to be
+useful later on many other machines and with other versions of @command{tar}
+is more challenging than you might think. @command{tar} archive formats
+have been evolving since the first versions of Unix. Many such formats
+are around, and are not always compatible with each other. This section
+discusses a few problems, and gives some advice about making @command{tar}
+archives more portable.
+
+One golden rule is simplicity. For example, limit your @command{tar}
+archives to contain only regular files and directories, avoiding
+other kind of special files. Do not attempt to save sparse files or
+contiguous files as such. Let's discuss a few more problems, in turn.
+
+@FIXME{Discuss GNU extensions (incremental backups, multi-volume
+archives and archive labels) in GNU and PAX formats.}
+
+@menu
+* Portable Names:: Portable Names
+* dereference:: Symbolic Links
+* hard links:: Hard Links
+* old:: Old V7 Archives
+* ustar:: Ustar Archives
+* gnu:: GNU and old GNU format archives.
+* posix:: @acronym{POSIX} archives
+* Checksumming:: Checksumming Problems
+* Large or Negative Values:: Large files, negative time stamps, etc.
+* Other Tars:: How to Extract GNU-Specific Data Using
+ Other @command{tar} Implementations
+@end menu
+
+@node Portable Names
+@subsection Portable Names
+
+Use portable file and member names. A name is portable if it contains
+only @acronym{ASCII} letters and digits, @samp{/}, @samp{.}, @samp{_}, and
+@samp{-}; it cannot be empty, start with @samp{-} or @samp{//}, or
+contain @samp{/-}. Avoid deep directory nesting. For portability to
+old Unix hosts, limit your file name components to 14 characters or
+less.
+
+If you intend to have your @command{tar} archives to be read under
+MSDOS, you should not rely on case distinction for file names, and you
+might use the @acronym{GNU} @command{doschk} program for helping you
+further diagnosing illegal MSDOS names, which are even more limited
+than System V's.
+
+@node dereference
+@subsection Symbolic Links
+@cindex File names, using symbolic links
+@cindex Symbolic link as file name
+
+@opindex dereference
+Normally, when @command{tar} archives a symbolic link, it writes a
+block to the archive naming the target of the link. In that way, the
+@command{tar} archive is a faithful record of the file system contents.
+When @option{--dereference} (@option{-h}) is used with
+@option{--create} (@option{-c}), @command{tar} archives the files
+symbolic links point to, instead of
+the links themselves.
+
+When creating portable archives, use @option{--dereference}
+(@option{-h}): some systems do not support
+symbolic links, and moreover, your distribution might be unusable if
+it contains unresolved symbolic links.
+
+When reading from an archive, the @option{--dereference} (@option{-h})
+option causes @command{tar} to follow an already-existing symbolic
+link when @command{tar} writes or reads a file named in the archive.
+Ordinarily, @command{tar} does not follow such a link, though it may
+remove the link before writing a new file. @xref{Dealing with Old
+Files}.
+
+The @option{--dereference} option is unsafe if an untrusted user can
+modify directories while @command{tar} is running. @xref{Security}.
+
+@node hard links
+@subsection Hard Links
+@cindex File names, using hard links
+@cindex hard links, dereferencing
+@cindex dereferencing hard links
+
+Normally, when @command{tar} archives a hard link, it writes a
+block to the archive naming the target of the link (a @samp{1} type
+block). In that way, the actual file contents is stored in file only
+once. For example, consider the following two files:
+
+@smallexample
+@group
+$ ls -l
+-rw-r--r-- 2 gray staff 4 2007-10-30 15:11 one
+-rw-r--r-- 2 gray staff 4 2007-10-30 15:11 jeden
+@end group
+@end smallexample
+
+Here, @file{jeden} is a link to @file{one}. When archiving this
+directory with a verbose level 2, you will get an output similar to
+the following:
+
+@smallexample
+$ tar cvvf ../archive.tar .
+drwxr-xr-x gray/staff 0 2007-10-30 15:13 ./
+-rw-r--r-- gray/staff 4 2007-10-30 15:11 ./jeden
+hrw-r--r-- gray/staff 0 2007-10-30 15:11 ./one link to ./jeden
+@end smallexample
+
+The last line shows that, instead of storing two copies of the file,
+@command{tar} stored it only once, under the name @file{jeden}, and
+stored file @file{one} as a hard link to this file.
+
+It may be important to know that all hard links to the given file are
+stored in the archive. For example, this may be necessary for exact
+reproduction of the file system. The following option does that:
+
+@table @option
+@xopindex{check-links, described}
+@item --check-links
+@itemx -l
+Check the number of links dumped for each processed file. If this
+number does not match the total number of hard links for the file, print
+a warning message.
+@end table
+
+For example, trying to archive only file @file{jeden} with this option
+produces the following diagnostics:
+
+@smallexample
+$ tar -c -f ../archive.tar -l jeden
+tar: Missing links to 'jeden'.
+@end smallexample
+
+Although creating special records for hard links helps keep a faithful
+record of the file system contents and makes archives more compact, it
+may present some difficulties when extracting individual members from
+the archive. For example, trying to extract file @file{one} from the
+archive created in previous examples produces, in the absence of file
+@file{jeden}:
+
+@smallexample
+$ tar xf archive.tar ./one
+tar: ./one: Cannot hard link to './jeden': No such file or directory
+tar: Error exit delayed from previous errors
+@end smallexample
+
+The reason for this behavior is that @command{tar} cannot seek back in
+the archive to the previous member (in this case, @file{one}), to
+extract it@footnote{There are plans to fix this in future releases.}.
+If you wish to avoid such problems at the cost of a bigger archive,
+use the following option:
+
+@table @option
+@xopindex{hard-dereference, described}
+@item --hard-dereference
+Dereference hard links and store the files they refer to.
+@end table
+
+For example, trying this option on our two sample files, we get two
+copies in the archive, each of which can then be extracted
+independently of the other:
+
+@smallexample
+@group
+$ tar -c -vv -f ../archive.tar --hard-dereference .
+drwxr-xr-x gray/staff 0 2007-10-30 15:13 ./
+-rw-r--r-- gray/staff 4 2007-10-30 15:11 ./jeden
+-rw-r--r-- gray/staff 4 2007-10-30 15:11 ./one
+@end group
+@end smallexample
+
+@node old
+@subsection Old V7 Archives
+@cindex Format, old style
+@cindex Old style format
+@cindex Old style archives
+@cindex v7 archive format
+
+Certain old versions of @command{tar} cannot handle additional
+information recorded by newer @command{tar} programs. To create an
+archive in V7 format (not ANSI), which can be read by these old
+versions, specify the @option{--format=v7} option in
+conjunction with the @option{--create} (@option{-c}) (@command{tar} also
+accepts @option{--portability} or @option{--old-archive} for this
+option). When you specify it,
+@command{tar} leaves out information about directories, pipes, fifos,
+contiguous files, and device files, and specifies file ownership by
+group and user IDs instead of group and user names.
+
+When updating an archive, do not use @option{--format=v7}
+unless the archive was created using this option.
+
+In most cases, a @emph{new} format archive can be read by an @emph{old}
+@command{tar} program without serious trouble, so this option should
+seldom be needed. On the other hand, most modern @command{tar}s are
+able to read old format archives, so it might be safer for you to
+always use @option{--format=v7} for your distributions. Notice,
+however, that @samp{ustar} format is a better alternative, as it is
+free from many of @samp{v7}'s drawbacks.
+
+@node ustar
+@subsection Ustar Archive Format
+
+@cindex ustar archive format
+The archive format defined by the @acronym{POSIX}.1-1988 specification is
+called @code{ustar}. Although it is more flexible than the V7 format, it
+still has many restrictions (@pxref{Formats,ustar}, for the detailed
+description of @code{ustar} format). Along with V7 format,
+@code{ustar} format is a good choice for archives intended to be read
+with other implementations of @command{tar}.
+
+To create an archive in @code{ustar} format, use the @option{--format=ustar}
+option in conjunction with @option{--create} (@option{-c}).
+
+@node gnu
+@subsection @acronym{GNU} and old @GNUTAR{} format
+
+@cindex GNU archive format
+@cindex Old GNU archive format
+@GNUTAR{} was based on an early draft of the
+@acronym{POSIX} 1003.1 @code{ustar} standard. @acronym{GNU} extensions to
+@command{tar}, such as the support for file names longer than 100
+characters, use portions of the @command{tar} header record which were
+specified in that @acronym{POSIX} draft as unused. Subsequent changes in
+@acronym{POSIX} have allocated the same parts of the header record for
+other purposes. As a result, @GNUTAR{} format is
+incompatible with the current @acronym{POSIX} specification, and with
+@command{tar} programs that follow it.
+
+In the majority of cases, @command{tar} will be configured to create
+this format by default. This will change in future releases, since
+we plan to make @samp{POSIX} format the default.
+
+To force creation a @GNUTAR{} archive, use option
+@option{--format=gnu}.
+
+@node posix
+@subsection @GNUTAR{} and @acronym{POSIX} @command{tar}
+
+@cindex POSIX archive format
+@cindex PAX archive format
+Starting from version 1.14 @GNUTAR{} features full support for
+@acronym{POSIX.1-2001} archives.
+
+A @acronym{POSIX} conformant archive will be created if @command{tar}
+was given @option{--format=posix} (@option{--format=pax}) option. No
+special option is required to read and extract from a @acronym{POSIX}
+archive.
+
+@menu
+* PAX keywords:: Controlling Extended Header Keywords.
+@end menu
+
+@node PAX keywords
+@subsubsection Controlling Extended Header Keywords
+
+@table @option
+@opindex pax-option
+@item --pax-option=@var{keyword-list}
+Handle keywords in @acronym{PAX} extended headers. This option is
+equivalent to @option{-o} option of the @command{pax} utility.
+@end table
+
+@var{Keyword-list} is a comma-separated
+list of keyword options, each keyword option taking one of
+the following forms:
+
+@table @code
+@item delete=@var{pattern}
+When used with one of archive-creation commands,
+this option instructs @command{tar} to omit from extended header records
+that it produces any keywords matching the string @var{pattern}.
+
+When used in extract or list mode, this option instructs tar
+to ignore any keywords matching the given @var{pattern} in the extended
+header records. In both cases, matching is performed using the pattern
+matching notation described in @acronym{POSIX 1003.2}, 3.13
+(@pxref{wildcards}). For example:
+
+@smallexample
+--pax-option delete=security.*
+@end smallexample
+
+would suppress security-related information.
+
+@item exthdr.name=@var{string}
+
+This keyword allows user control over the name that is written into the
+ustar header blocks for the extended headers. The name is obtained
+from @var{string} after making the following substitutions:
+
+@multitable @columnfractions .25 .55
+@headitem Meta-character @tab Replaced By
+@item %d @tab The directory name of the file, equivalent to the
+result of the @command{dirname} utility on the translated file name.
+@item %f @tab The name of the file with the directory information
+stripped, equivalent to the result of the @command{basename} utility
+on the translated file name.
+@item %p @tab The process @acronym{ID} of the @command{tar} process.
+@item %% @tab A @samp{%} character.
+@end multitable
+
+Any other @samp{%} characters in @var{string} produce undefined
+results.
+
+If no option @samp{exthdr.name=string} is specified, @command{tar}
+will use the following default value:
+
+@smallexample
+%d/PaxHeaders.%p/%f
+@end smallexample
+
+@item exthdr.mtime=@var{value}
+
+This keyword defines the value of the @samp{mtime} field that
+is written into the ustar header blocks for the extended headers.
+By default, the @samp{mtime} field is set to the modification time
+of the archive member described by that extended header (or to the
+value of the @option{--mtime} option, if supplied).
+
+@item globexthdr.name=@var{string}
+This keyword allows user control over the name that is written into
+the ustar header blocks for global extended header records. The name
+is obtained from the contents of @var{string}, after making
+the following substitutions:
+
+@multitable @columnfractions .25 .55
+@headitem Meta-character @tab Replaced By
+@item %n @tab An integer that represents the
+sequence number of the global extended header record in the archive,
+starting at 1.
+@item %p @tab The process @acronym{ID} of the @command{tar} process.
+@item %% @tab A @samp{%} character.
+@end multitable
+
+Any other @samp{%} characters in @var{string} produce undefined results.
+
+If no option @samp{globexthdr.name=string} is specified, @command{tar}
+will use the following default value:
+
+@smallexample
+$TMPDIR/GlobalHead.%p.%n
+@end smallexample
+
+@noindent
+where @samp{$TMPDIR} represents the value of the @var{TMPDIR}
+environment variable. If @var{TMPDIR} is not set, @command{tar}
+uses @samp{/tmp}.
+
+@item globexthdr.mtime=@var{value}
+
+This keyword defines the value of the @samp{mtime} field that
+is written into the ustar header blocks for the global extended headers.
+By default, the @samp{mtime} field is set to the time when
+@command{tar} was invoked.
+
+@item @var{keyword}=@var{value}
+When used with one of archive-creation commands, these keyword/value pairs
+will be included at the beginning of the archive in a global extended
+header record. When used with one of archive-reading commands,
+@command{tar} will behave as if it has encountered these keyword/value
+pairs at the beginning of the archive in a global extended header
+record.
+
+@item @var{keyword}:=@var{value}
+When used with one of archive-creation commands, these keyword/value pairs
+will be included as records at the beginning of an extended header for
+each file. This is effectively equivalent to @var{keyword}=@var{value}
+form except that it creates no global extended header records.
+
+When used with one of archive-reading commands, @command{tar} will
+behave as if these keyword/value pairs were included as records at the
+end of each extended header; thus, they will override any global or
+file-specific extended header record keywords of the same names.
+For example, in the command:
+
+@smallexample
+tar --format=posix --create \
+ --file archive --pax-option gname:=user .
+@end smallexample
+
+the group name will be forced to a new value for all files
+stored in the archive.
+@end table
+
+In any of the forms described above, the @var{value} may be
+a string enclosed in curly braces. In that case, the string
+between the braces is understood either as a textual time
+representation, as described in @ref{Date input formats}, or a name of
+the existing file, starting with @samp{/} or @samp{.}. In the latter
+case, the modification time of that file is used.
+
+For example, to set all modification times to the current date, you
+use the following option:
+
+@smallexample
+--pax-option='mtime:=@{now@}'
+@end smallexample
+
+Note quoting of the option's argument.
+
+@cindex archives, binary equivalent
+@cindex binary equivalent archives, creating
+As another example, here is the option that ensures that any two
+archives created using it, will be binary equivalent if they have the
+same contents:
+
+@smallexample
+--pax-option=exthdr.name=%d/PaxHeaders/%f,atime:=0
+@end smallexample
+
+@noindent
+If you extract files from such an archive and recreate the archive
+from them, you will also need to eliminate changes due to ctime, as
+shown in examples below:
+
+@smallexample
+--pax-option=exthdr.name=%d/PaxHeaders/%f,atime:=0,ctime:=0
+@end smallexample
+
+@noindent
+or
+
+@smallexample
+--pax-option=exthdr.name=%d/PaxHeaders/%f,atime:=0,delete=ctime
+@end smallexample
+
+@node Checksumming
+@subsection Checksumming Problems
+
+SunOS and HP-UX @command{tar} fail to accept archives created using
+@GNUTAR{} and containing non-@acronym{ASCII} file names, that
+is, file names having characters with the eighth bit set, because they
+use signed checksums, while @GNUTAR{} uses unsigned
+checksums while creating archives, as per @acronym{POSIX} standards. On
+reading, @GNUTAR{} computes both checksums and accepts either of them.
+It is somewhat worrying that a lot of people may go
+around doing backup of their files using faulty (or at least
+non-standard) software, not learning about it until it's time to
+restore their missing files with an incompatible file extractor, or
+vice versa.
+
+@GNUTAR{} computes checksums both ways, and accepts either of them
+on read, so @acronym{GNU} tar can read Sun tapes even with their
+wrong checksums. @GNUTAR{} produces the standard
+checksum, however, raising incompatibilities with Sun. That is to
+say, @GNUTAR{} has not been modified to
+@emph{produce} incorrect archives to be read by buggy @command{tar}'s.
+I've been told that more recent Sun @command{tar} now read standard
+archives, so maybe Sun did a similar patch, after all?
+
+The story seems to be that when Sun first imported @command{tar}
+sources on their system, they recompiled it without realizing that
+the checksums were computed differently, because of a change in
+the default signing of @code{char}'s in their compiler. So they
+started computing checksums wrongly. When they later realized their
+mistake, they merely decided to stay compatible with it, and with
+themselves afterwards. Presumably, but I do not really know, HP-UX
+has chosen their @command{tar} archives to be compatible with Sun's.
+The current standards do not favor Sun @command{tar} format. In any
+case, it now falls on the shoulders of SunOS and HP-UX users to get
+a @command{tar} able to read the good archives they receive.
+
+@node Large or Negative Values
+@subsection Large or Negative Values
+@cindex large values
+@cindex future time stamps
+@cindex negative time stamps
+@UNREVISED
+
+The above sections suggest to use @samp{oldest possible} archive
+format if in doubt. However, sometimes it is not possible. If you
+attempt to archive a file whose metadata cannot be represented using
+required format, @GNUTAR{} will print error message and ignore such a
+file. You will than have to switch to a format that is able to
+handle such values. The format summary table (@pxref{Formats}) will
+help you to do so.
+
+In particular, when trying to archive files larger than 8GB or with
+timestamps not in the range 1970-01-01 00:00:00 through 2242-03-16
+12:56:31 @sc{utc}, you will have to chose between @acronym{GNU} and
+@acronym{POSIX} archive formats. When considering which format to
+choose, bear in mind that the @acronym{GNU} format uses
+two's-complement base-256 notation to store values that do not fit
+into standard @acronym{ustar} range. Such archives can generally be
+read only by a @GNUTAR{} implementation. Moreover, they sometimes
+cannot be correctly restored on another hosts even by @GNUTAR{}. For
+example, using two's complement representation for negative time
+stamps that assumes a signed 32-bit @code{time_t} generates archives
+that are not portable to hosts with differing @code{time_t}
+representations.
+
+On the other hand, @acronym{POSIX} archives, generally speaking, can
+be extracted by any tar implementation that understands older
+@acronym{ustar} format. The only exception are files larger than 8GB.
+
+@FIXME{Describe how @acronym{POSIX} archives are extracted by non
+POSIX-aware tars.}
+
+@node Other Tars
+@subsection How to Extract GNU-Specific Data Using Other @command{tar} Implementations
+
+In previous sections you became acquainted with various quirks
+necessary to make your archives portable. Sometimes you may need to
+extract archives containing GNU-specific members using some
+third-party @command{tar} implementation or an older version of
+@GNUTAR{}. Of course your best bet is to have @GNUTAR{} installed,
+but if it is for some reason impossible, this section will explain
+how to cope without it.
+
+When we speak about @dfn{GNU-specific} members we mean two classes of
+them: members split between the volumes of a multi-volume archive and
+sparse members. You will be able to always recover such members if
+the archive is in PAX format. In addition split members can be
+recovered from archives in old GNU format. The following subsections
+describe the required procedures in detail.
+
+@menu
+* Split Recovery:: Members Split Between Volumes
+* Sparse Recovery:: Sparse Members
+@end menu
+
+@node Split Recovery
+@subsubsection Extracting Members Split Between Volumes
+
+@cindex Multi-volume archives, extracting using non-GNU tars
+If a member is split between several volumes of an old GNU format archive
+most third party @command{tar} implementation will fail to extract
+it. To extract it, use @command{tarcat} program (@pxref{Tarcat}).
+This program is available from
+@uref{http://www.gnu.org/@/software/@/tar/@/utils/@/tarcat.html, @GNUTAR{}
+home page}. It concatenates several archive volumes into a single
+valid archive. For example, if you have three volumes named from
+@file{vol-1.tar} to @file{vol-3.tar}, you can do the following to
+extract them using a third-party @command{tar}:
+
+@smallexample
+$ @kbd{tarcat vol-1.tar vol-2.tar vol-3.tar | tar xf -}
+@end smallexample
+
+@cindex Multi-volume archives in PAX format, extracting using non-GNU tars
+You could use this approach for most (although not all) PAX
+format archives as well. However, extracting split members from a PAX
+archive is a much easier task, because PAX volumes are constructed in
+such a way that each part of a split member is extracted to a
+different file by @command{tar} implementations that are not aware of
+GNU extensions. More specifically, the very first part retains its
+original name, and all subsequent parts are named using the pattern:
+
+@smallexample
+%d/GNUFileParts.%p/%f.%n
+@end smallexample
+
+@noindent
+where symbols preceded by @samp{%} are @dfn{macro characters} that
+have the following meaning:
+
+@multitable @columnfractions .25 .55
+@headitem Meta-character @tab Replaced By
+@item %d @tab The directory name of the file, equivalent to the
+result of the @command{dirname} utility on its full name.
+@item %f @tab The file name of the file, equivalent to the result
+of the @command{basename} utility on its full name.
+@item %p @tab The process @acronym{ID} of the @command{tar} process that
+created the archive.
+@item %n @tab Ordinal number of this particular part.
+@end multitable
+
+For example, if the file @file{var/longfile} was split during archive
+creation between three volumes, and the creator @command{tar} process
+had process @acronym{ID} @samp{27962}, then the member names will be:
+
+@smallexample
+var/longfile
+var/GNUFileParts.27962/longfile.1
+var/GNUFileParts.27962/longfile.2
+@end smallexample
+
+When you extract your archive using a third-party @command{tar}, these
+files will be created on your disk, and the only thing you will need
+to do to restore your file in its original form is concatenate them in
+the proper order, for example:
+
+@smallexample
+@group
+$ @kbd{cd var}
+$ @kbd{cat GNUFileParts.27962/longfile.1 \
+ GNUFileParts.27962/longfile.2 >> longfile}
+$ rm -f GNUFileParts.27962
+@end group
+@end smallexample
+
+Notice, that if the @command{tar} implementation you use supports PAX
+format archives, it will probably emit warnings about unknown keywords
+during extraction. They will look like this:
+
+@smallexample
+@group
+Tar file too small
+Unknown extended header keyword 'GNU.volume.filename' ignored.
+Unknown extended header keyword 'GNU.volume.size' ignored.
+Unknown extended header keyword 'GNU.volume.offset' ignored.
+@end group
+@end smallexample
+
+@noindent
+You can safely ignore these warnings.
+
+If your @command{tar} implementation is not PAX-aware, you will get
+more warnings and more files generated on your disk, e.g.:
+
+@smallexample
+@group
+$ @kbd{tar xf vol-1.tar}
+var/PaxHeaders.27962/longfile: Unknown file type 'x', extracted as
+normal file
+Unexpected EOF in archive
+$ @kbd{tar xf vol-2.tar}
+tmp/GlobalHead.27962.1: Unknown file type 'g', extracted as normal file
+GNUFileParts.27962/PaxHeaders.27962/sparsefile.1: Unknown file type
+'x', extracted as normal file
+@end group
+@end smallexample
+
+Ignore these warnings. The @file{PaxHeaders.*} directories created
+will contain files with @dfn{extended header keywords} describing the
+extracted files. You can delete them, unless they describe sparse
+members. Read further to learn more about them.
+
+@node Sparse Recovery
+@subsubsection Extracting Sparse Members
+
+@cindex sparse files, extracting with non-GNU tars
+Any @command{tar} implementation will be able to extract sparse members from a
+PAX archive. However, the extracted files will be @dfn{condensed},
+i.e., any zero blocks will be removed from them. When we restore such
+a condensed file to its original form, by adding zero blocks (or
+@dfn{holes}) back to their original locations, we call this process
+@dfn{expanding} a compressed sparse file.
+
+@pindex xsparse
+To expand a file, you will need a simple auxiliary program called
+@command{xsparse}. It is available in source form from
+@uref{http://www.gnu.org/@/software/@/tar/@/utils/@/xsparse.html, @GNUTAR{}
+home page}.
+
+@cindex sparse files v.1.0, extracting with non-GNU tars
+Let's begin with archive members in @dfn{sparse format
+version 1.0}@footnote{@xref{PAX 1}.}, which are the easiest to expand.
+The condensed file will contain both file map and file data, so no
+additional data will be needed to restore it. If the original file
+name was @file{@var{dir}/@var{name}}, then the condensed file will be
+named @file{@var{dir}/@/GNUSparseFile.@var{n}/@/@var{name}}, where
+@var{n} is a decimal number@footnote{Technically speaking, @var{n} is a
+@dfn{process @acronym{ID}} of the @command{tar} process which created the
+archive (@pxref{PAX keywords}).}.
+
+To expand a version 1.0 file, run @command{xsparse} as follows:
+
+@smallexample
+$ @kbd{xsparse @file{cond-file}}
+@end smallexample
+
+@noindent
+where @file{cond-file} is the name of the condensed file. The utility
+will deduce the name for the resulting expanded file using the
+following algorithm:
+
+@enumerate 1
+@item If @file{cond-file} does not contain any directories,
+@file{../cond-file} will be used;
+
+@item If @file{cond-file} has the form
+@file{@var{dir}/@var{t}/@var{name}}, where both @var{t} and @var{name}
+are simple names, with no @samp{/} characters in them, the output file
+name will be @file{@var{dir}/@var{name}}.
+
+@item Otherwise, if @file{cond-file} has the form
+@file{@var{dir}/@var{name}}, the output file name will be
+@file{@var{name}}.
+@end enumerate
+
+In the unlikely case when this algorithm does not suit your needs,
+you can explicitly specify output file name as a second argument to
+the command:
+
+@smallexample
+$ @kbd{xsparse @file{cond-file} @file{out-file}}
+@end smallexample
+
+It is often a good idea to run @command{xsparse} in @dfn{dry run} mode
+first. In this mode, the command does not actually expand the file,
+but verbosely lists all actions it would be taking to do so. The dry
+run mode is enabled by @option{-n} command line argument:
+
+@smallexample
+@group
+$ @kbd{xsparse -n /home/gray/GNUSparseFile.6058/sparsefile}
+Reading v.1.0 sparse map
+Expanding file '/home/gray/GNUSparseFile.6058/sparsefile' to
+'/home/gray/sparsefile'
+Finished dry run
+@end group
+@end smallexample
+
+To actually expand the file, you would run:
+
+@smallexample
+$ @kbd{xsparse /home/gray/GNUSparseFile.6058/sparsefile}
+@end smallexample
+
+@noindent
+The program behaves the same way all UNIX utilities do: it will keep
+quiet unless it has something important to tell you (e.g. an error
+condition or something). If you wish it to produce verbose output,
+similar to that from the dry run mode, use @option{-v} option:
+
+@smallexample
+@group
+$ @kbd{xsparse -v /home/gray/GNUSparseFile.6058/sparsefile}
+Reading v.1.0 sparse map
+Expanding file '/home/gray/GNUSparseFile.6058/sparsefile' to
+'/home/gray/sparsefile'
+Done
+@end group
+@end smallexample
+
+Additionally, if your @command{tar} implementation has extracted the
+@dfn{extended headers} for this file, you can instruct @command{xstar}
+to use them in order to verify the integrity of the expanded file.
+The option @option{-x} sets the name of the extended header file to
+use. Continuing our example:
+
+@smallexample
+@group
+$ @kbd{xsparse -v -x /home/gray/PaxHeaders.6058/sparsefile \
+ /home/gray/GNUSparseFile.6058/sparsefile}
+Reading extended header file
+Found variable GNU.sparse.major = 1
+Found variable GNU.sparse.minor = 0
+Found variable GNU.sparse.name = sparsefile
+Found variable GNU.sparse.realsize = 217481216
+Reading v.1.0 sparse map
+Expanding file '/home/gray/GNUSparseFile.6058/sparsefile' to
+'/home/gray/sparsefile'
+Done
+@end group
+@end smallexample
+
+@anchor{extracting sparse v.0.x}
+@cindex sparse files v.0.1, extracting with non-GNU tars
+@cindex sparse files v.0.0, extracting with non-GNU tars
+An @dfn{extended header} is a special @command{tar} archive header
+that precedes an archive member and contains a set of
+@dfn{variables}, describing the member properties that cannot be
+stored in the standard @code{ustar} header. While optional for
+expanding sparse version 1.0 members, the use of extended headers is
+mandatory when expanding sparse members in older sparse formats: v.0.0
+and v.0.1 (The sparse formats are described in detail in @ref{Sparse
+Formats}.) So, for these formats, the question is: how to obtain
+extended headers from the archive?
+
+If you use a @command{tar} implementation that does not support PAX
+format, extended headers for each member will be extracted as a
+separate file. If we represent the member name as
+@file{@var{dir}/@var{name}}, then the extended header file will be
+named @file{@var{dir}/@/PaxHeaders.@var{n}/@/@var{name}}, where
+@var{n} is an integer number.
+
+Things become more difficult if your @command{tar} implementation
+does support PAX headers, because in this case you will have to
+manually extract the headers. We recommend the following algorithm:
+
+@enumerate 1
+@item
+Consult the documentation of your @command{tar} implementation for an
+option that prints @dfn{block numbers} along with the archive
+listing (analogous to @GNUTAR{}'s @option{-R} option). For example,
+@command{star} has @option{-block-number}.
+
+@item
+Obtain verbose listing using the @samp{block number} option, and
+find block numbers of the sparse member in question and the member
+immediately following it. For example, running @command{star} on our
+archive we obtain:
+
+@smallexample
+@group
+$ @kbd{star -t -v -block-number -f arc.tar}
+@dots{}
+star: Unknown extended header keyword 'GNU.sparse.size' ignored.
+star: Unknown extended header keyword 'GNU.sparse.numblocks' ignored.
+star: Unknown extended header keyword 'GNU.sparse.name' ignored.
+star: Unknown extended header keyword 'GNU.sparse.map' ignored.
+block 56: 425984 -rw-r--r-- gray/users Jun 25 14:46 2006 GNUSparseFile.28124/sparsefile
+block 897: 65391 -rw-r--r-- gray/users Jun 24 20:06 2006 README
+@dots{}
+@end group
+@end smallexample
+
+@noindent
+(as usual, ignore the warnings about unknown keywords.)