+@cindex @code{echo}, checkpoint action
+The simplest value of @var{action} is @samp{echo}. It instructs
+@command{tar} to display the default message on the standard error
+stream upon arriving at each checkpoint. The default message is (in
+@acronym{POSIX} locale) @samp{Write checkpoint @var{n}}, for write
+checkpoints, and @samp{Read checkpoint @var{n}}, for read checkpoints.
+Here, @var{n} represents ordinal number of the checkpoint.
+
+In another locales, translated versions of this message are used.
+
+This is the default action, so running:
+
+@smallexample
+$ @kbd{tar -c --checkpoint=1000 --checkpoint-action=echo} /var
+@end smallexample
+
+@noindent
+is equivalent to:
+
+@smallexample
+$ @kbd{tar -c --checkpoint=1000} /var
+@end smallexample
+
+The @samp{echo} action also allows to supply a customized message.
+You do so by placing an equals sign and the message right after it,
+e.g.:
+
+@smallexample
+--checkpoint-action="echo=Hit %s checkpoint #%u"
+@end smallexample
+
+The @samp{%s} and @samp{%u} in the above example are
+@dfn{meta-characters}. The @samp{%s} meta-character is replaced with
+the @dfn{type} of the checkpoint: @samp{write} or
+@samp{read} (or a corresponding translated version in locales other
+than @acronym{POSIX}). The @samp{%u} meta-character is replaced with
+the ordinal number of the checkpoint. Thus, the above example could
+produce the following output when used with the @option{--create}
+option:
+
+@smallexample
+tar: Hit write checkpoint #10
+tar: Hit write checkpoint #20
+tar: Hit write checkpoint #30
+@end smallexample
+
+Aside from meta-character expansion, the message string is subject to
+@dfn{unquoting}, during which the backslash @dfn{escape sequences} are
+replaced with their corresponding @acronym{ASCII} characters
+(@pxref{escape sequences}). E.g. the following action will produce an
+audible bell and the message described above at each checkpoint:
+
+@smallexample
+--checkpoint-action='echo=\aHit %s checkpoint #%u'
+@end smallexample
+
+@cindex @code{bell}, checkpoint action
+There is also a special action which produces an audible signal:
+@samp{bell}. It is not equivalent to @samp{echo='\a'}, because
+@samp{bell} sends the bell directly to the console (@file{/dev/tty}),
+whereas @samp{echo='\a'} sends it to the standard error.
+
+@cindex @code{ttyout}, checkpoint action
+The @samp{ttyout=@var{string}} action outputs @var{string} to
+@file{/dev/tty}, so it can be used even if the standard output is
+redirected elsewhere. The @var{string} is subject to the same
+modifications as with @samp{echo} action. In contrast to the latter,
+@samp{ttyout} does not prepend @command{tar} executable name to the
+string, nor does it output a newline after it. For example, the
+following action will print the checkpoint message at the same screen
+line, overwriting any previous message:
+
+@smallexample
+--checkpoint-action="ttyout=\rHit %s checkpoint #%u"
+@end smallexample
+
+@cindex @code{dot}, checkpoint action
+Another available checkpoint action is @samp{dot} (or @samp{.}). It
+instructs @command{tar} to print a single dot on the standard listing
+stream, e.g.:
+
+@smallexample
+$ @kbd{tar -c --checkpoint=1000 --checkpoint-action=dot} /var
+...
+@end smallexample
+
+For compatibility with previous @GNUTAR{} versions, this action can
+be abbreviated by placing a dot in front of the checkpoint frequency,
+as shown in the previous section.
+
+@cindex @code{sleep}, checkpoint action
+Yet another action, @samp{sleep}, pauses @command{tar} for a specified
+amount of seconds. The following example will stop for 30 seconds at each
+checkpoint:
+
+@smallexample
+$ @kbd{tar -c --checkpoint=1000 --checkpoint-action=sleep=30}
+@end smallexample
+
+@anchor{checkpoint exec}
+@cindex @code{exec}, checkpoint action
+Finally, the @code{exec} action executes a given external command.
+For example:
+
+@smallexample
+$ @kbd{tar -c --checkpoint=1000 --checkpoint-action=exec=/sbin/cpoint}
+@end smallexample
+
+The supplied command can be any valid command invocation, with or
+without additional command line arguments. If it does contain
+arguments, don't forget to quote it to prevent it from being split by
+the shell. @xref{external, Running External Commands}, for more detail.
+
+The command gets a copy of @command{tar}'s environment plus the
+following variables:
+
+@table @env
+@vrindex TAR_VERSION, checkpoint script environment
+@item TAR_VERSION
+@GNUTAR{} version number.
+
+@vrindex TAR_ARCHIVE, checkpoint script environment
+@item TAR_ARCHIVE
+The name of the archive @command{tar} is processing.
+
+@vrindex TAR_BLOCKING_FACTOR, checkpoint script environment
+@item TAR_BLOCKING_FACTOR
+Current blocking factor (@pxref{Blocking}).
+
+@vrindex TAR_CHECKPOINT, checkpoint script environment
+@item TAR_CHECKPOINT
+Number of the checkpoint.
+
+@vrindex TAR_SUBCOMMAND, checkpoint script environment
+@item TAR_SUBCOMMAND
+A short option describing the operation @command{tar} is executing.
+@xref{Operations}, for a complete list of subcommand options.
+
+@vrindex TAR_FORMAT, checkpoint script environment
+@item TAR_FORMAT
+Format of the archive being processed. @xref{Formats}, for a complete
+list of archive format names.
+@end table
+
+These environment variables can also be passed as arguments to the
+command, provided that they are properly escaped, for example:
+
+@smallexample
+@kbd{tar -c -f arc.tar \
+ --checkpoint-action='exec=/sbin/cpoint $TAR_FILENAME'}
+@end smallexample
+
+@noindent
+Notice single quotes to prevent variable names from being expanded by
+the shell when invoking @command{tar}.
+
+Any number of actions can be defined, by supplying several
+@option{--checkpoint-action} options in the command line. For
+example, the command below displays two messages, pauses
+execution for 30 seconds and executes the @file{/sbin/cpoint} script:
+
+@example
+@group
+$ @kbd{tar -c -f arc.tar \
+ --checkpoint-action='\aecho=Hit %s checkpoint #%u' \
+ --checkpoint-action='echo=Sleeping for 30 seconds' \
+ --checkpoint-action='sleep=30' \
+ --checkpoint-action='exec=/sbin/cpoint'}
+@end group
+@end example
+
+This example also illustrates the fact that
+@option{--checkpoint-action} can be used without
+@option{--checkpoint}. In this case, the default checkpoint frequency
+(at each 10th record) is assumed.
+
+@node warnings
+@section Controlling Warning Messages
+
+Sometimes, while performing the requested task, @GNUTAR{} notices
+some conditions that are not exactly errors, but which the user
+should be aware of. When this happens, @command{tar} issues a
+@dfn{warning message} describing the condition. Warning messages
+are output to the standard error and they do not affect the exit
+code of @command{tar} command.
+
+@xopindex{warning, explained}
+@GNUTAR{} allows the user to suppress some or all of its warning
+messages:
+
+@table @option
+@item --warning=@var{keyword}
+Control display of the warning messages identified by @var{keyword}.
+If @var{keyword} starts with the prefix @samp{no-}, such messages are
+suppressed. Otherwise, they are enabled.
+
+Multiple @option{--warning} messages accumulate.
+
+The tables below list allowed values for @var{keyword} along with the
+warning messages they control.
+@end table
+
+@subheading Keywords controlling @command{tar} operation
+@table @asis
+@kwindex all
+@item all
+Enable all warning messages. This is the default.
+@kwindex none
+@item none
+Disable all warning messages.
+@kwindex filename-with-nuls
+@cindex @samp{file name read contains nul character}, warning message
+@item filename-with-nuls
+@samp{%s: file name read contains nul character}
+@kwindex alone-zero-block
+@cindex @samp{A lone zero block at}, warning message
+@item alone-zero-block
+@samp{A lone zero block at %s}
+@end table
+
+@subheading Keywords applicable for @command{tar --create}
+@table @asis
+@kwindex cachedir
+@cindex @samp{contains a cache directory tag}, warning message
+@item cachedir
+@samp{%s: contains a cache directory tag %s; %s}
+@kwindex file-shrank
+@cindex @samp{File shrank by %s bytes}, warning message
+@item file-shrank
+@samp{%s: File shrank by %s bytes; padding with zeros}
+@kwindex xdev
+@cindex @samp{file is on a different filesystem}, warning message
+@item xdev
+@samp{%s: file is on a different filesystem; not dumped}
+@kwindex file-ignored
+@cindex @samp{Unknown file type; file ignored}, warning message
+@cindex @samp{socket ignored}, warning message
+@cindex @samp{door ignored}, warning message
+@item file-ignored
+@samp{%s: Unknown file type; file ignored}
+@*@samp{%s: socket ignored}
+@*@samp{%s: door ignored}
+@kwindex file-unchanged
+@cindex @samp{file is unchanged; not dumped}, warning message
+@item file-unchanged
+@samp{%s: file is unchanged; not dumped}
+@kwindex ignore-archive
+@cindex @samp{file is the archive; not dumped}, warning message
+@kwindex ignore-archive
+@cindex @samp{file is the archive; not dumped}, warning message
+@item ignore-archive
+@samp{%s: file is the archive; not dumped}
+@kwindex file-removed
+@cindex @samp{File removed before we read it}, warning message
+@item file-removed
+@samp{%s: File removed before we read it}
+@kwindex file-changed
+@cindex @samp{file changed as we read it}, warning message
+@item file-changed
+@samp{%s: file changed as we read it}
+@end table
+
+@subheading Keywords applicable for @command{tar --extract}
+@table @asis
+@kwindex timestamp
+@cindex @samp{implausibly old time stamp %s}, warning message
+@cindex @samp{time stamp %s is %s s in the future}, warning message
+@item timestamp
+@samp{%s: implausibly old time stamp %s}
+@*@samp{%s: time stamp %s is %s s in the future}
+@kwindex contiguous-cast
+@cindex @samp{Extracting contiguous files as regular files}, warning message
+@item contiguous-cast
+@samp{Extracting contiguous files as regular files}
+@kwindex symlink-cast
+@cindex @samp{Attempting extraction of symbolic links as hard links}, warning message
+@item symlink-cast
+@samp{Attempting extraction of symbolic links as hard links}
+@kwindex unknown-cast
+@cindex @samp{Unknown file type '%c', extracted as normal file}, warning message
+@item unknown-cast
+@samp{%s: Unknown file type '%c', extracted as normal file}
+@kwindex ignore-newer
+@cindex @samp{Current %s is newer or same age}, warning message
+@item ignore-newer
+@samp{Current %s is newer or same age}
+@kwindex unknown-keyword
+@cindex @samp{Ignoring unknown extended header keyword '%s'}, warning message
+@item unknown-keyword
+@samp{Ignoring unknown extended header keyword '%s'}
+@kwindex decompress-program
+@item decompress-program
+Controls verbose description of failures occurring when trying to run
+alternative decompressor programs (@pxref{alternative decompression
+programs}). This warning is disabled by default (unless
+@option{--verbose} is used). A common example of what you can get
+when using this warning is:
+
+@smallexample
+$ @kbd{tar --warning=decompress-program -x -f archive.Z}
+tar (child): cannot run compress: No such file or directory
+tar (child): trying gzip
+@end smallexample
+
+This means that @command{tar} first tried to decompress
+@file{archive.Z} using @command{compress}, and, when that
+failed, switched to @command{gzip}.
+@kwindex record-size
+@cindex @samp{Record size = %lu blocks}, warning message
+@item record-size
+@samp{Record size = %lu blocks}
+@end table
+
+@subheading Keywords controlling incremental extraction:
+@table @asis
+@kwindex rename-directory
+@cindex @samp{%s: Directory has been renamed from %s}, warning message
+@cindex @samp{%s: Directory has been renamed}, warning message
+@item rename-directory
+@samp{%s: Directory has been renamed from %s}
+@*@samp{%s: Directory has been renamed}
+@kwindex new-directory
+@cindex @samp{%s: Directory is new}, warning message
+@item new-directory
+@samp{%s: Directory is new}
+@kwindex xdev
+@cindex @samp{%s: directory is on a different device: not purging}, warning message
+@item xdev
+@samp{%s: directory is on a different device: not purging}
+@kwindex bad-dumpdir
+@cindex @samp{Malformed dumpdir: 'X' never used}, warning message
+@item bad-dumpdir
+@samp{Malformed dumpdir: 'X' never used}
+@end table
+
+@node interactive
+@section Asking for Confirmation During Operations
+@cindex Interactive operation
+
+Typically, @command{tar} carries out a command without stopping for
+further instructions. In some situations however, you may want to
+exclude some files and archive members from the operation (for instance
+if disk or storage space is tight). You can do this by excluding
+certain files automatically (@pxref{Choosing}), or by performing
+an operation interactively, using the @option{--interactive} (@option{-w}) option.
+@command{tar} also accepts @option{--confirmation} for this option.
+
+@opindex interactive
+When the @option{--interactive} (@option{-w}) option is specified, before
+reading, writing, or deleting files, @command{tar} first prints a message
+for each such file, telling what operation it intends to take, then asks
+for confirmation on the terminal. The actions which require
+confirmation include adding a file to the archive, extracting a file
+from the archive, deleting a file from the archive, and deleting a file
+from disk. To confirm the action, you must type a line of input
+beginning with @samp{y}. If your input line begins with anything other
+than @samp{y}, @command{tar} skips that file.
+
+If @command{tar} is reading the archive from the standard input,
+@command{tar} opens the file @file{/dev/tty} to support the interactive
+communications.
+
+Verbose output is normally sent to standard output, separate from
+other error messages. However, if the archive is produced directly
+on standard output, then verbose output is mixed with errors on
+@code{stderr}. Producing the archive on standard output may be used
+as a way to avoid using disk space, when the archive is soon to be
+consumed by another process reading it, say. Some people felt the need
+of producing an archive on stdout, still willing to segregate between
+verbose output and error output. A possible approach would be using a
+named pipe to receive the archive, and having the consumer process to
+read from that named pipe. This has the advantage of letting standard
+output free to receive verbose output, all separate from errors.
+
+@node external
+@section Running External Commands
+
+Certain @GNUTAR{} operations imply running external commands that you
+supply on the command line. One of such operations is checkpointing,
+described above (@pxref{checkpoint exec}). Another example of this
+feature is the @option{-I} option, which allows you to supply the
+program to use for compressing or decompressing the archive
+(@pxref{use-compress-program}).
+
+Whenever such operation is requested, @command{tar} first splits the
+supplied command into words much like the shell does. It then treats
+the first word as the name of the program or the shell script to execute
+and the rest of words as its command line arguments. The program,
+unless given as an absolute file name, is searched in the shell's
+@env{PATH}.
+
+Any additional information is normally supplied to external commands
+in environment variables, specific to each particular operation. For
+example, the @option{--checkpoint-action=exec} option, defines the
+@env{TAR_ARCHIVE} variable to the name of the archive being worked
+upon. You can, should the need be, use these variables in the
+command line of the external command. For example:
+
+@smallexample
+$ @kbd{tar -x -f archive.tar \
+ --checkpoint=exec='printf "%04d in %32s\r" $TAR_CHECKPOINT $TAR_ARCHIVE'}
+@end smallexample
+
+@noindent
+This command prints for each checkpoint its number and the name of the
+archive, using the same output line on the screen.
+
+Notice the use of single quotes to prevent variable names from being
+expanded by the shell when invoking @command{tar}.
+
+@node operations
+@chapter @GNUTAR{} Operations
+
+@menu
+* Basic tar::
+* Advanced tar::
+* create options::
+* extract options::
+* backup::
+* Applications::
+* looking ahead::